1．55μm低温生长GaAs谐振腔增强型探测器

利用低温（200℃）生长的GaAs材料作为吸收层制备了GaAs基1．55μm谐振腔增强型（RCE）光电探测器，对其光电特性进行了分析、研究．无光照0偏压下探测器暗电流为8．0×10^12A；光电流谱峰值波长1563nm；响应谱线半宽4nm，具有良好的波长选择性．

硅基1．55μm可调谐共振腔窄带光电探测器的研究

制作了一种低成本硅基1．55μm可调谐共振腔增强型探测器．首次获得硅基长波长可调谐共振腔探测器的窄带响应，共振峰量子效率达44%，峰值半高宽为12．5nm，调谐范围14．5nm，并且获得1．8GHz的高频响应．本制作工艺不复杂，成本低，有望用于工业生产．

1.55μm MOEMS可调谐光滤波器调谐性能模拟

建立了等效单层梁模型和一维集总模型,用经典力学理论和传输矩阵方法模拟了多层材料构成且具有四臂固支梁结构的1.55μm Si基MOEMS(Micro-Opto-Electro-Mechnical-Systems)可调谐滤波器的调谐特性.模拟调谐系数与实验结果吻合较好.

1.55μm Laser Diode Monolithically Integrated with Spot-Size Converter Using Conventional Process

A novel 1.55μm laser diode with spot-size converter is designed and fabricated using conventional photolithography and chemical wet etching process.For the laser diode,a ridge double-core structure is employed.For the spot-size converter,a buried ridge double-core structure is incorporated.The laterally tapered active core is designed and optically combined with the thin and wide passive core to control the size of mode.The laser diode threshold current is measured to be 40mA together with high slop efficiency of 0.35W/A.The beam divergence angles in the horizontal and vertical directions are as small as 14.89°×18.18°,respectively,resulting in low-coupling losses with a cleaved optical fiber (3dB loss).

Fabrication of 1.55μm Si-Based Resonant Cavity Enhanced Photodetectors

A novel bonding method using silicate gel as bonding medium is developed.High reflective SiO2/Si mirrors deposited on silicon substrates by e-beam deposition are bonded to the active layers at a low temperature of 350℃ without any special treatment on bonding surfaces.The reflectivities of the mirrors can be as high as 99.9%.A Si-based narrow band response InGaAs photodetector is successfully fabricated,with a quantum efficiency of 22.6% at the peak wavelength of 1.54μm,and a full width at half maximum of about 27nm.This method has a great potential for industry processes.

用于光纤通信的1.55μmDFB激光器的可靠性分析

对用于光纤通信的InP基1.55 μm DFB激光器的可靠性进行了研究.测试并分析了100 ℃时100 mA和150 mA 2种电流应力条件,经过1 700 h老化,测试分析了激光器特性随时间的变化情况,拟合出在100 ℃,150 mA条件下的激光器寿命在1 000 h小时左右.根据实验结果对比,提出了一种新的利用温度、电流两个加速度变量同时进行加速老化,快速估计激光器寿命并分析其可靠性的方法.对新的寿命估算方法进行了详细的讨论.

Narrow-beam divergence 1.55μm laser diodes with integrated self-aligned spotsize conVerter

This paper describes the high performance of narrow-beam divergence spot size converter (SSC) integrated separately confined heterostructure (SCH) LD. The upper optical confinement layer (OCL) and the butt-coupled tapered thickness waveguide were regrown simultaneously, which not only offered the separated optimization of the active region and the integrated spotsize converter, but also reduced the difficulty of the butt-joint selective regrowth. The threshold current was as low as 5.4 mA, the output power at 55 mA was 10.1 mW, the vertical and horizontal far field divergence angles were as low as 9°and 15°, and the 1-dB misalignment tolerances were 3.6 and 3.4μm, respectively.

1.55-μm Si-based MOEMS optical tunable filter

A prototype 1.55-μm Si-based micro-opto-electro-mechanical-systems (MOEMS) tunable filter is fabricated, employing surface micromachining technology. Full-width-at-half-maximum (FWHM) of the transmission spectrum is 23 nm. The tuning range is 30 nm under 50-V applied voltage. The device can be readily integrated with resonant cavity enhanced (RCE) detector and vertical cavity surface emitting laser (VCSEL) to fabricate tunable active devices.

1．55μm Si基光电探测器的研究进展

从材料的生长、器件结构的选择等方面对1．55μm锗光电探测器的研究进展进行了综述，对Ge量子点共振腔增强型光电探测器的应用前景进行了探讨与展望。

1.55μm偏振不灵敏光放大器结构材料的生长

采用张应变量子阱结构，生长了光放大器材料。利用宽接触激光器TE和TM模的输出功率曲线判断并调整量子阱材料的应变量，得到了偏振灵敏度较低的光放大器结构。

Design of Tensile Strained InGaAsP/InGaAsP MQW for 1.55μmpolarization Indepent Semiconductor Optical Amplifier

The theoretical optimization of tensile strained InGaAsP/InGaAsP MQW for 1.5μm window polarization-independent semiconductor optical amplifier is reported. The valence-band structure of the MQw is calculated by using K·P method, in which 6×6 Luttinger effective-mass Hamiltonian is taken into account. LThe polarization dependent optical gain is calculated with various well width, strain, and carrier density.

1.55μm Fabry-Perot Thermo-Optical Tunable Filter with amorphous-Si as Cavity

A 1.55μm Fabry-Perot (F-P) thermo-optical tunable filter is fabricated. The cavity is made of amorphous silicon (a-Si) layer grown by electron-beam evaporation technique. Due to the excellent thermo-optical property of a-Si, the refractive index of the F-P cavity will be changed by heating; the transmittance resonant peak will therefore shift substantially. The measured tuning range is 12nm, FWHM (full-width-at-half-maximum) of the transmission peak is 9nm, and heating efficiency is 0.1K/mW. The large FWHM is mainly due to the non-ideal coating deposition and mirror undulation. Possible improvements to increase the efficiency of heating are suggested.

镜面起伏对1.55 μm Si基MEMS光滤波器的影响

用传输矩阵方法，在简化的光学模型基础上，分别讨论了分布式Bragg反射镜DBR（Distributed Bragg Reflector）的生长精度及镜面起伏对1.55 μm Si基MEMS（Micro-Electro-Mechanical-System）可调谐光滤波器透射谱的影响。计算表明

1.55μm波长发光的自组织InAs量子点生长

通过引入较长停顿时间，采用分子束外延循环生长方法在350℃低温获得了一种横向聚合的InAs自组织量子点，在荧光光谱中观察到1.55μm波长的发光峰。通过AFM和PL谱的联合研究，表明此低温循环生长方法有利于在长波长发光的量子点的形成。

1.55μm InGaAsP-MQW自对准压缩台面高速DBF激光器

采用一种自对准压缩台面结构制作高速1.55μm DFB激光器。激光器的典型阈值为12mA，单面斜率效率达0.157mW/mA，出光功率大于20mW。由于采用窄条p-InP作为电流阻挡层，因此激光器的寄生电容可降至2.5pF，-3DB调制带宽可达9.1GHz。