Customer Driven Order-to-Delivery Process

This thesis was made for a large forest industry company’s business segment. The purpose of the study was to improve the performance of the order-to-delivery process of the business segment. The study proceeded in three phases. The first phase was to define customer expectations in the market. The second phase was to analyse the performance and the operations of the order-to-delivery process, and to define any challenges or problems in serving the customers. The third and final phase was improving the performance of the order-to-delivery process, within the scope defined by the first two phases. The analysis showed that the delivery reliability is an essential but a challenging issue in the case company’s markets. On delivery reliability standpoint, the most challenging factors were the detected information flow distortions within the company as well as in the whole supply chain, and the lack of horizontal control over the multi-stage process.

Salesperson's customer orientation in the personal selling process and in the use of personal selling techniques in the business-to-business setting

Selling is much maligned, often under-valued subject whose inadequate showing in business schools is in inverse proportion to the many job opportunities it offers and the importance of salespeople bringing incomes to companies. The purpose of this research is to increase the understanding of customer-oriented selling and examine the influence of customer-oriented philosophy on selling process, the applicability of selling techniques to this philosophy and the importance of them to salespeople. The empirical section of the study is two-fold. Firstly, the data of qualitative part was collected by conducting five thematic interviews among sales consultants and case company representatives. The findings of the study indicate that customer-oriented selling requires the activity of salespeople. In the customer-oriented personal selling process, salespeople invest time in the preplanning, the need analysis and the benefit demonstration stages. However, the findings propose that salespeople today must also have the basic capabilities for executing the traditional sales process, and the balance between traditional and consultative selling process will change as the duration of the relationship between the salesperson and customer increases. The study also proposes that selling techniques still belong to the customer-oriented selling process, although their roles might be modest. This thesis mapped 75 selling techniques and the quantitative part of the study explored what selling techniques are considered to be important by salespeople in direct selling industry when they make sales with new and existing customers. Response rate of the survey was 69.5%.

Toiminnanohjausjärjestelmä tarrapainolle

Tämä diplomityö on selostus tarraetikettejä valmistavalle yritykselle talon sisäisesti toteutetusta toiminnanohjausjärjestelmän kehitysprojektista. Projektissa luotiin ohjelmisto tukemaan yrityksen keskeisimpiä toimintoja, kuten myyntiä, asiakkuuksien hallintaa, tuotantoa, materiaalihallintoa sekä johdon päätöksentekoa. Työssä tarkastellaan ensin yrityksen menettelytapoja ja valmistusmenetelmiä, ja kerätään niistä konkreettisia vaatimuksia järjestelmälle. Nämä yhdistetään muista tutkimuksista kerättyihin toiminnanohjausjärjestelmien mahdollisuuksiin ja riskeihin sekä laaditaan näistä projektin tavoitteet. Seuraavaksi käydään läpi toteutuksessa tehdyt suunnitteluratkaisut ja niihin johtaneet seikat. Toteutetut toiminnot ja ominaisuudet esitellään perusteluineen. Lopuksi analysoidaan projektin onnistumista peilaten sitä muihin aiheeseen liittyviin tutkimustuloksiin. Käyttöönottoprosessin vaiheet ja siinä esiintyneet ongelmat käydään myös lyhyesti läpi.

Markkinatutkimustiedon hyödyntäminen yrityksen myynnin ja markkinoinnin tarpeisiin

Tutkimuksen tavoitteena oli selvittää, miten yrityksessä käytetään markkinatutkimustietoa ja -työkaluja sekä miten markkinatutkimustiedon käyttöä yrityksessä voisi kehittää tukemaan myynnin ja markkinoinnin tarpeita. Tutkimus suoritettiin laadullisena case-tutkimuksena. Tutkimuksen teoreettinen lähdeaineisto kerättiin kirjallisuudesta sekä tieteellisistä artikkeleista ja empiirinen aineisto suorittamalla haastatteluja sekä kysely yrityksen työntekijöille. Tutkimuksen teoreettisena pohjana käytettiin liiketoimintatiedon, markkinatiedon ja kilpailijatiedon hallintaa sekä markkinatietoprosessia erityisesti tiedon käytön ja hyödyntämisen näkökulmasta. Empiirinen aineisto tutkimukseen kerättiin haastattelemalla sekä suorittamalla kysely yrityksen myynnin ja markkinoinnin parissa toimiville henkilöille. Niin teorialähteiden kuin kohdeyrityksessä kerätyn empiirisen materiaalin pohjalta voidaan todeta, että markkinatietoa käytetään asiakasrajapinnassa sekä yrityksen sisäisessä strategiatyössä. Markkinatutkimustyökalujen ja -tiedon käyttöön organisaatiossa kannustavat tiedon helppo saatavuus ja käyttö sekä ajankäytön resurssointi uuden oppimiseen. Myös tiedon tuoreus ja lyhyet yhteenvedot koettiin tärkeiksi tekijöiksi tiedon tehokkaamman hyödyntämisen edesauttajaksi.

Phase voltage control and filtering in a converter-fed single-phase customer-end system of the LVDC distribution network

In recent years, the network vulnerability to natural hazards has been noticed. Moreover, operating on the limits of the network transmission capabilities have resulted in major outages during the past decade. One of the reasons for operating on these limits is that the network has become outdated. Therefore, new technical solutions are studied that could provide more reliable and more energy efficient power distributionand also a better profitability for the network owner. It is the development and price of power electronics that have made the DC distribution an attractive alternative again. In this doctoral thesis, one type of a low-voltage DC distribution system is investigated. Morespecifically, it is studied which current technological solutions, used at the customer-end, could provide better power quality for the customer when compared with the current system. To study the effect of a DC network on the customer-end power quality, a bipolar DC network model is derived. The model can also be used to identify the supply parameters when the V/kW ratio is approximately known. Although the model provides knowledge of the average behavior, it is shown that the instantaneous DC voltage ripple should be limited. The guidelines to choose an appropriate capacitance value for the capacitor located at the input DC terminals of the customer-end are given. Also the structure of the customer-end is considered. A comparison between the most common solutions is made based on their cost, energy efficiency, and reliability. In the comparison, special attention is paid to the passive filtering solutions since the filter is considered a crucial element when the lifetime expenses are determined. It is found out that the filter topology most commonly used today, namely the LC filter, does not provide economical advantage over the hybrid filter structure. Finally, some of the typical control system solutions are introduced and their shortcomings are presented. As a solution to the customer-end voltage regulation problem, an observer-based control scheme is proposed. It is shown how different control system structures affect the performance. The performance meeting the requirements is achieved by using only one output measurement, when operating in a rigid network. Similar performance can be achieved in a weak grid by DC voltage measurement. An additional improvement can be achieved when an adaptive gain scheduling-based control is introduced. As a conclusion, the final power quality is determined by a sum of various factors, and the thesis provides the guidelines for designing the system that improves the power quality experienced by the customer.

Customer consciousness in the production process of a steel factory

The purpose of this thesis is to examine the level of customer consciousness of the production process employees in a steel factory and to investigate the methods of internal marketing in order to propose development practices to enhance the customer consciousness of the case company employees. The significance of the level of customer consciousness is discussed and practices already implemented affecting the level of customer consciousness in the company are examined. The literature review gives an insight to the role of customer consciousness in the CRM philosophy of a manufacturing company and examines the means of internal marketing in enhancing customer consciousness. In the empirical part of the study, the level and significance of customer consciousness is determined by conducting individual and focus group interviews. The interviews are also used to examine the practices that could function in enhancing the customer consciousness of the employees. Development suggestions to improve the level of customer consciousness in the production process are given based on the results. The level of customer consciousness is at a poor level in the production process and influences above all on work motivation and job satisfaction, but possibly on customer satisfaction as well. The enhancement of customer consciousness in the production process should be done e.g. by ensuring the distribution of right knowledge coherently to all of the employees, gathering large customer reference database to exploit in work and in training, using visual illustration in presenting the customer information, training proactively and letting the employees to participate in the customer oriented development activities. Customer satisfaction focused reward system can be considered.

Strategic supply chain alignment to customer buying behavior

In search for competitive advantage, designing and managing supply chain networks have become a necessary competence for organizations. The target of this thesis is to answer a question, how to design a multiple supply chain network. The purpose is to study, what kind of different supply chain designs exist and, how to choose appropriate supply chain designs for a company. In the thesis, the focus is on the supply chain alignment to customers, more specifically to customer buying behavior. The research method was a case study. A framework for measuring customer buying behavior was developed based on the literature and it was used in the study of customer buying behavior in the case environment. In the case company structured interviews and data records were used as sources of evidence. Persons working in the customer-interface were interviewed face-to-face and through an e-mail questionnaire. When analyzing the data, a Quality function deployment matrix was used as one analysis method. As a result of the thesis, supply chain network of the case company is proposed to be divided into three separate supply chains, which focus on different areas and they could be called lean, agile and continuous replenishment supply chains. In conclusion, in the supply chain alignment to customer buying behavior several aspects have to be studied from different perspectives. According to the results, a multiple supply chain strategy is recommended to be implemented in the case company, since the diversity of the customer needs cannot be managed efficiently through a single supply chain.

Terveyskaupan erikoisliikkeen menestystarina: strategia ja houkuttelevuus yritysostajan perspektiivistä

Tutkielman tavoitteena on tiivistetysti edesauttaa Lappeenrannan Lifeterveyskaupan yritysmyyntiprosessia kuvailemalla kohdeyrityksen strategiaa, menestystekijöitä ja houkuttelevuutta yritysostajan näkökulma huomioiden siten, että niiden hahmottaminen ja omaksuminen helpottuu yritysostajalle. Tutkielman sisältöä voidaan hyödyntää yritysmyyntiprosessissa sellaisenaan tai tarpeen mukaan muunneltuna. Tutkielma on kvalitatiivinen tapaustutkimus, joka sisältää piirteitä käsite- ja toiminta-analyyttisestä sekä osin nomoteettisesta tutkimusotteesta. Aineisto kerättiin puolistrukturoiduilla teemahaastatteluilla. Kohdeyrityksen strategia on asiakaslähtöinen. Perusstrategia kohdeyrityksessä on riippuvainen kilpailijakontekstista, mutta useimmissa tapauksissa kilpailuetu perustuu differointiin. Suurena terveyskaupan erikoisliikkeenä voidaan hyödyntää myös suuruuden ekonomiaa. Yrityksen toiminta on alalle fokusoitua. Life-terveyskauppaketjuun kuuluminen ja erinomainen liiketilan sijainti ovat olleet tärkeitä tekijöitä menestyksessä. Runsas mainonta, suuri neuvotteluvoima toimittajiin nähden, tuoteportfolion hallinta, osaava henkilöstö ja hyvät sopimusehdot ovat edesauttaneet menestystä. Venäjä-potentiaali Lappeenrannassa on suuri. Markkina-asema on talousaseman ohella erinomainen ja hyödyksi sekä yritykselle että yritysostajalle.

Customer Driven Service Development – Technology-based Care and Services for the Elderly

The objective of this master’s thesis was to examine technology-based smart home devices and services. Topic was approached through basic theories, transaction cost theory and resource-based view in order to build basis for this thesis. Conceptual framework was discussed by means of networks, value networks and service systems which provide a useful framework for service development. The needs of the elderly living at home were discussed in order to find out which technology-based services could be used to satisfy the needs. Segmentation and need data collected previously during proactive home visits was exploited and additionally a survey targeted to experts and professionals of social and health care sector was done to verify the needs. Finally, the results of the survey were analyzed using quality function deployment method to figure out the most important and suitable service offerings for the elderly. As a conclusion of analysis, social media and monitoring services are the most useful technology-based services. However, traditional home services will still maintain their necessity too.

Towards increased productivity and quality in software development using agile, lean and collaborative approaches

Dagens programvaruindustri står inför alltmer komplicerade utmaningar i en värld där programvara är nästan allstädes närvarande i våra dagliga liv. Konsumenten vill ha produkter som är pålitliga, innovativa och rika i funktionalitet, men samtidigt också förmånliga. Utmaningen för oss inom IT-industrin är att skapa mer komplexa, innovativa lösningar till en lägre kostnad. Detta är en av orsakerna till att processförbättring som forskningsområde inte har minskat i betydelse. IT-proffs ställer sig frågan: “Hur håller vi våra löften till våra kunder, samtidigt som vi minimerar vår risk och ökar vår kvalitet och produktivitet?” Inom processförbättringsområdet finns det olika tillvägagångssätt. Traditionella processförbättringsmetoder för programvara som CMMI och SPICE fokuserar på kvalitets- och riskaspekten hos förbättringsprocessen. Mer lättviktiga metoder som t.ex. lättrörliga metoder (agile methods) och Lean-metoder fokuserar på att hålla löften och förbättra produktiviteten genom att minimera slöseri inom utvecklingsprocessen. Forskningen som presenteras i denna avhandling utfördes med ett specifikt mål framför ögonen: att förbättra kostnadseffektiviteten i arbetsmetoderna utan att kompromissa med kvaliteten. Den utmaningen attackerades från tre olika vinklar. För det första förbättras arbetsmetoderna genom att man introducerar lättrörliga metoder. För det andra bibehålls kvaliteten genom att man använder mätmetoder på produktnivå. För det tredje förbättras kunskapsspridningen inom stora företag genom metoder som sätter samarbete i centrum. Rörelsen bakom lättrörliga arbetsmetoder växte fram under 90-talet som en reaktion på de orealistiska krav som den tidigare förhärskande vattenfallsmetoden ställde på IT-branschen. Programutveckling är en kreativ process och skiljer sig från annan industri i det att den största delen av det dagliga arbetet går ut på att skapa något nytt som inte har funnits tidigare. Varje programutvecklare måste vara expert på sitt område och använder en stor del av sin arbetsdag till att skapa lösningar på problem som hon aldrig tidigare har löst. Trots att detta har varit ett välkänt faktum redan i många decennier, styrs ändå många programvaruprojekt som om de vore produktionslinjer i fabriker. Ett av målen för rörelsen bakom lättrörliga metoder är att lyfta fram just denna diskrepans mellan programutvecklingens innersta natur och sättet på vilket programvaruprojekt styrs. Lättrörliga arbetsmetoder har visat sig fungera väl i de sammanhang de skapades för, dvs. små, samlokaliserade team som jobbar i nära samarbete med en engagerad kund. I andra sammanhang, och speciellt i stora, geografiskt utspridda företag, är det mera utmanande att införa lättrörliga metoder. Vi har nalkats utmaningen genom att införa lättrörliga metoder med hjälp av pilotprojekt. Detta har två klara fördelar. För det första kan man inkrementellt samla kunskap om metoderna och deras samverkan med sammanhanget i fråga. På så sätt kan man lättare utveckla och anpassa metoderna till de specifika krav som sammanhanget ställer. För det andra kan man lättare överbrygga motstånd mot förändring genom att introducera kulturella förändringar varsamt och genom att målgruppen får direkt förstahandskontakt med de nya metoderna. Relevanta mätmetoder för produkter kan hjälpa programvaruutvecklingsteam att förbättra sina arbetsmetoder. När det gäller team som jobbar med lättrörliga och Lean-metoder kan en bra uppsättning mätmetoder vara avgörande för beslutsfattandet när man prioriterar listan över uppgifter som ska göras. Vårt fokus har legat på att stöda lättrörliga och Lean-team med interna produktmätmetoder för beslutsstöd gällande så kallad omfaktorering, dvs. kontinuerlig kvalitetsförbättring av programmets kod och design. Det kan vara svårt att ta ett beslut att omfaktorera, speciellt för lättrörliga och Lean-team, eftersom de förväntas kunna rättfärdiga sina prioriteter i termer av affärsvärde. Vi föreslår ett sätt att mäta designkvaliteten hos system som har utvecklats med hjälp av det så kallade modelldrivna paradigmet. Vi konstruerar även ett sätt att integrera denna mätmetod i lättrörliga och Lean-arbetsmetoder. En viktig del av alla processförbättringsinitiativ är att sprida kunskap om den nya programvaruprocessen. Detta gäller oavsett hurdan process man försöker introducera – vare sig processen är plandriven eller lättrörlig. Vi föreslår att metoder som baserar sig på samarbete när processen skapas och vidareutvecklas är ett bra sätt att stöda kunskapsspridning på. Vi ger en översikt över författarverktyg för processer på marknaden med det förslaget i åtanke.

Components of customer value in nurse call solutions

This study aimed to identify the value components of nurse call solutions. The value creation of such systems was analyzed by using a framework that was created based on the existing customer value literature. The empirical part of the study was conducted as a multiple-case study by using qualitative research methods. The data for the analysis was gathered through structured interviews in ten Finnish eldercare centers. The results indicate that a nurse call solution creates value for eldercare centers by increasing the safety of the residents, and by improving the efficiency of the staff while also providing cost savings.

Palveluyrityksen brändin vaikutus ostopäätökseen b2b-markkinoilla

Tutkimuksen tavoitteena on kuvata brändin olemusta ja menestystekijöitä ja ymmärtää palveluyrityksen brändin vaikutus ostotilanteessa b2b-markkinoilla. Tutkittavaa ongelmaa lähestytään teoreettisen ja empiirisen tutkimuksen kautta. Empiirisen näkökulman tutkimukseen tuo case-yritys, monipalveluyhtiö Barona, jonka brändin merkitystä ostotilanteessa b2b-markkinoilla tutkimuksessa arvioidaan. Tutkimuksen pääongelma on seuraava: Miten palveluyrityksen brändi vaikuttaa ostopäätökseen b2b-markkinoilla? Tutkimuksen lähestymistapa on kvalitatiivinen eli laadullinen. Tutkimusstrategia on case- eli tapaustutkimus ja tutkimusmenetelmänä on käytetty teemahaastattelua. Brändikokemuksen syntymistä ja sen vaikutusta ostopäätökseen tarkastellaan empiriaosiossa asiakkaan ja brändin hallinnoijan, eli Baronan, näkökulmasta. Tutkimuksen tulokset tukevat sitä olettamusta, että palveluyrityksen brändillä on vaikutusta ostopäätöksessä myös b2b-markkinoilla. Brändit b2b-markkinoilla ovat saaneet kuluttajamarkkinoita vähemmän huomiota, sillä brändien vaikutus ostopäätöksessä koetaan irrationaaliseksi tekijäksi, ja yritysmarkkinoilla ostajien on ajateltu tekevän päätökset täysin rationaalisin perustein. Myös b2b-markkinoilla on päätöksentekijänä kuitenkin yksilö, ei organisaatio. Palvelua ostaessaan ostaja perustelee valintansa järkisyillä, kuten laadulla. Todelliset syyt hankintaan voivat kuitenkin olla hyvin toisenlaiset, kuten brändin status, menestys tai arvostus. Brändi on merkittävässä asemassa myös b2b-asiakkaan ostopäätösprosessissa, varsinkin silloin, kun erottautuminen on vaikeaa. Siinä missä palvelu itsessään lunastaa lupaustaan käyttäjälle, brändi tuottaa lisäarvoa yli palvelun toiminnallisen tarkoituksen. Brändi saa palvelun vaikuttamaan paremmalta. Tietynmerkkisen palvelun nähdessään asiakas odottaa sen tarjoavan tietyt asiat. Asiakas haluaa luottaa siihen, että laatu pysyy samana, eikä palvelua tarvitse joka kerta arvioida erikseen. Asiakas ostaa brändiin sisältyviä laatulupauksia omien tarpeidensa täyttämiseksi tehden valintansa sen perusteella, mitä hyötyä ja arvoa hän odottaa saavansa rahojensa vastineeksi.

Utilisation of customer contacts: customer observation

Importance of customer as a source of knowledge and finding out the customer needs have both been emphasised both in business literature and in the interviews made for this study. Especially the latent customer needs are seen important for future competitiveness. However, the methods for finding out the customer needs concentrate on the present, clearly phrased needs. There is a need for rich customer based knowledge. Customer contacts are underutilised as a source of knowledge. The objective of this study is to find a method to utilise the customer contacts as a source of knowledge more efficiently. To reach this objective, the customer observation is presented. A concrete goal is the development of a general method of customer observation and its application to the needs of the case company Fastems. Fastems hopes that the method raises the amount of ideas that come to the product and service development processes and increases their customer orientation. The method is tested in practise in the piloting stage. The testing is done in service organisations of Fastems in several countries. The observations received during the piloting phase are analysed and feedback is given to the observers. An important part of the study is to find appropriate methods for motivating the observers. The successful implementation and sustenance of the method are seen as goals of high importance. Later on, the customer observation method is implemented throughout the company. The results of the piloting are promising and the described method has roused interest among other companies as well.

Customer reference marketing and utilization of social media as an integral part of customer references

The objective of this Bachelor's Thesis is to find out the role of social media in the B-to-B marketing environment of the information technology industry and to discover how IT-firms utilize social media as a part of their customer reference marketing. To reach the objectives the concepts of customer reference marketing and social media are determined. Customer reference marketing can be characterized as one of the most practically relevant but academically relatively overlooked ways in which a company can leverage its customers and delivered solutions and use them as references in its marketing activities. We will cover which external and internal functions customer references have, that contribute to the growth and performance of B-to-B firms. We also address the three mechanisms of customer reference marketing which are 'status transfer', 'validation through testimonials' and 'demonstration of experience and prior performance'. The concept of social media stands for social interaction and creation of user-based content which exclusively occurs through Internet. The social media are excellent tools for networking because of the fast and easy access, easy interaction and vast amount of multimedia attributes. The allocation of social media is determined. The case company helps clarify the specific characteristics of social media usage as part of customer-reference-marketing activities. For IT-firms the best channels to utilize social media in their customer reference marketing activities are publishing and distribution services of content and networking services.

Complexity Optimization in Product Development with Modularization

A company’s competence to manage its product portfolio complexity is becoming critically important in the rapidly changing business environment. The continuous evolvement of customer needs, the competitive market environment and internal product development lead to increasing complexity in product portfolios. The companies that manage the complexity in product development are more profitable in the long run. The complexity derives from product development and management processes where the new product variant development is not managed efficiently. Complexity is managed with modularization which is a method that divides the product structure into modules. In modularization, it is essential to take into account the trade-off between the perceived customer value and the module or component commonality across the products. Another goal is to enable the product configuration to be more flexible. The benefits are achieved through optimizing complexity in module offering and deriving the new product variants more flexibly and accurately. The developed modularization process includes the process steps for preparation, mapping the current situation, the creation of a modular strategy and implementing the strategy. Also the organization and support systems have to be adapted to follow-up targets and to execute modularization in practice.