Improving and User Interface to E-Procurement Software Used in Asset Accounting and Investigating Effects to Efficiency

This diploma thesis has been done to international organization which takes care from the accounting actions of two major companies. In this organization are used three different purchasing tools which are used when new asset master data is wanted to input to SAP R/3- system. The aim of this thesis is to find out how much changing the user interface of one of these three e-procurement programs will affect to overall efficiency in asset accounting. As an addition will be introduced project framework which can be used in future projects and which help to avoid certain steps in the development process. At the moment data needs to be inputted manually with many useless mouse clicks and data needs to be searched from many various resources which slow down the process. Other organization has better tools at the moment than the myOrders system which is under investigation Research was started by exploring the main improvement areas. After this possible defects were traced. Suggested improvements were thought by exploring literature which has been written from usability design and research. Meanwhile also directional calculations from the benefits of the project were done alongside with the analysis of the possible risks and threats. After this NSN IT approved the changes which they thought was acceptable. The next step was to program them into tool and test them before releasing to production environment. The calculations were made also from implemented improvements and compared them to planned ones From whole project was made a framework which can be utilized also to other similar projects. The complete calculation was not possible because of time schedule of the project. Important observation in the project was that efficiency is not improved not only by changing the GUI but also improving processes without any programming. Feedback from end user should be also listened more in development process. End-user is after all the one who knows the best how the program should look like.

Asiakkuuksien johtaminen tietointensiivisessä pk-yrityksessä: Case Severa Oyj

Asiakkuuksien johtaminen on tunnistettu laskentatoimen ja markkinoinnin kirjallisuudessa yhdeksi tärkeimmistä kilpailuedun lähteistä tulevaisuudessa. Teema korostuu tietointensiivisissä pk-yrityksissä. Tutkielman tarkoitus oli tämän pohjalta löytää keinoja tehostamaan asiakkuuksien johtamista caseyrityksessä. Teoriaosuudessa aihealuetta tarkasteltiin yleisenä ilmiönä aiemman kirjallisuuden pohjalta, empiirinen osio toteutettiin casetutkimuksena. Tutkimusaineisto kerättiin yrityksen tietojärjestelmistä, kyselylomaketutkimuksella ja osallistuvan havainnoinnin avulla. Tulosten perusteella caseyrityksen asiakasryhmien kannattavuudet eroavat toisistaan merkittävästi. Analyysien avulla resurssien käyttöä voidaan kohdistaa tarkemmin tulevaisuudessa. Asiakasinformaation integroimista ja ongelmatilanteiden hallintaa voidaan myös tehostaa. Parannuksia voidaan toteuttaa osin jo olemassa olevin keinoin, vastuu on viime kädessä yrityksen johdolla. Pääfokuksen tulisi kiinnittyä jatkossa asiakaskannattavuuksiin, sisäisiin prosesseihin ja tulevaisuuden asiakashankintaan.

Project and customer profitability analysis: an empirical case study

The objective of this case study is to provide a Finnish solution provider company an objective, in-depth analysis of their project based business and especially of project estimation accuracy. A project and customer profitability analysis is conducted as a complementary addition to describe profitability of the Case Company’s core division. The theoretical framework is constructed on project profitability and customer profitability analysis. Project profitability is approached starting from managing projects, continuing to project pricing process and concluding to project success. The empirical part of this study describes the Case Company’s project portfolio, and by means of quantitative analysis, the study describes how the characteristics of a project impact the project’s profitability. The findings indicate that it really makes a difference in project portfolio’s estimated and actual profitability when methods of installation and technical specifications are scrutinized. Implications on profitability are gathered into a risk assessment tool proposal.

Customer knowledge processing in key account management

The ability of the supplier firm to generate and utilise customer-specific knowledge has attracted increasing attention in the academic literature during the last decade. It has been argued the customer knowledge should treated as a strategic asset the same as any other intangible assets. Yet, at the same time it has been shown that the management of customer-specific knowledge is challenging in practice, and that many firms are better at acquiring customer knowledge than at making use of it. This study examines customer knowledge processing in the context of key account management in large industrial firms. This focus was chosen because key accounts are demanding and complex. It is not unusual for a single key account relationship to constitute a complex web of relationships between the supplier and the key account – thus easily leading to the dispersion of customer-specific knowledge in the supplier firm. Although the importance of customer-specific knowledge generation has been widely acknowledged in the literature, surprisingly little attention has been paid to the processes through which firms generate, disseminate and use such knowledge internally for enhancing the relationships with their major, strategically important key account customers. This thesis consists of two parts. The first part comprises a theoretical overview and draws together the main findings of the study, whereas the second part consists of five complementary empirical research papers based on survey data gathered from large industrial firms in Finland. The findings suggest that the management of customer knowledge generated about and form key accounts is a three-dimensional process consisting of acquisition, dissemination and utilization. It could be concluded from the results that customer-specific knowledge is a strategic asset because the supplier’s customer knowledge processing activities have a positive effect on supplier’s key account performance. Moreover, in examining the determinants of each phase separately the study identifies a number of intra-organisational factors that facilitate the process in supplier firms. The main contribution of the thesis lies in linking the concept of customer knowledge processing to the previous literature on key account management. Moreover, given than this literature is mainly conceptual or case-based, a further contribution is to examine its consequences and determinants based on quantitative empirical data.

Modeling and developing a customer-oriented configuration process in a mass customization environment

In this thesis the main objective is to examine and model configuration system and related processes. When and where configuration information is created in product development process and how it is utilized in order-delivery process? These two processes are the essential part of the whole configuration system from the information point of view. Empirical part of the work was done as a constructive research inside a company that follows a mass customization approach. Data models and documentation are created for different development stages of the configuration system. A base data model already existed for new structures and relations between these structures. This model was used as the basis for the later data modeling work. Data models include different data structures, their key objects and attributes, and relations between. Representation of configuration rules for the to-be configuration system was defined as one of the key focus point. Further, it is examined how the customer needs and requirements information can be integrated into the product development process. Requirements hierarchy and classification system is presented. It is shown how individual requirement specifications can be connected for physical design structure via features by developing the existing base data model further.

Customer Driven Order-to-Delivery Process

This thesis was made for a large forest industry company’s business segment. The purpose of the study was to improve the performance of the order-to-delivery process of the business segment. The study proceeded in three phases. The first phase was to define customer expectations in the market. The second phase was to analyse the performance and the operations of the order-to-delivery process, and to define any challenges or problems in serving the customers. The third and final phase was improving the performance of the order-to-delivery process, within the scope defined by the first two phases. The analysis showed that the delivery reliability is an essential but a challenging issue in the case company’s markets. On delivery reliability standpoint, the most challenging factors were the detected information flow distortions within the company as well as in the whole supply chain, and the lack of horizontal control over the multi-stage process.

Salesperson's customer orientation in the personal selling process and in the use of personal selling techniques in the business-to-business setting

Selling is much maligned, often under-valued subject whose inadequate showing in business schools is in inverse proportion to the many job opportunities it offers and the importance of salespeople bringing incomes to companies. The purpose of this research is to increase the understanding of customer-oriented selling and examine the influence of customer-oriented philosophy on selling process, the applicability of selling techniques to this philosophy and the importance of them to salespeople. The empirical section of the study is two-fold. Firstly, the data of qualitative part was collected by conducting five thematic interviews among sales consultants and case company representatives. The findings of the study indicate that customer-oriented selling requires the activity of salespeople. In the customer-oriented personal selling process, salespeople invest time in the preplanning, the need analysis and the benefit demonstration stages. However, the findings propose that salespeople today must also have the basic capabilities for executing the traditional sales process, and the balance between traditional and consultative selling process will change as the duration of the relationship between the salesperson and customer increases. The study also proposes that selling techniques still belong to the customer-oriented selling process, although their roles might be modest. This thesis mapped 75 selling techniques and the quantitative part of the study explored what selling techniques are considered to be important by salespeople in direct selling industry when they make sales with new and existing customers. Response rate of the survey was 69.5%.

Accounting Beta Measuring Systematic Risk: Empirical Evidence from the Finnish Markets

The main purpose of this study is to examine whether accounting-based variables can be used to measure systematic risk of a company using Finnish data. When the fundamental sources of systematic risk are known, companies are able to manage these risks and increase company value. Accounting beta was formed based on OLS regression models. Theoretical background for the study was based on the findings of studies according to which business risk, financial risk, operating risk and growth risk can be theoretically regarded as determinants of the systematic risk. The results reveal that accounting variables describe systematic risk of a company. The accounting beta is found to be particularly sensitive to the changes in the risk components. The investigation is confidential until 15.10.2012.

Phase voltage control and filtering in a converter-fed single-phase customer-end system of the LVDC distribution network

In recent years, the network vulnerability to natural hazards has been noticed. Moreover, operating on the limits of the network transmission capabilities have resulted in major outages during the past decade. One of the reasons for operating on these limits is that the network has become outdated. Therefore, new technical solutions are studied that could provide more reliable and more energy efficient power distributionand also a better profitability for the network owner. It is the development and price of power electronics that have made the DC distribution an attractive alternative again. In this doctoral thesis, one type of a low-voltage DC distribution system is investigated. Morespecifically, it is studied which current technological solutions, used at the customer-end, could provide better power quality for the customer when compared with the current system. To study the effect of a DC network on the customer-end power quality, a bipolar DC network model is derived. The model can also be used to identify the supply parameters when the V/kW ratio is approximately known. Although the model provides knowledge of the average behavior, it is shown that the instantaneous DC voltage ripple should be limited. The guidelines to choose an appropriate capacitance value for the capacitor located at the input DC terminals of the customer-end are given. Also the structure of the customer-end is considered. A comparison between the most common solutions is made based on their cost, energy efficiency, and reliability. In the comparison, special attention is paid to the passive filtering solutions since the filter is considered a crucial element when the lifetime expenses are determined. It is found out that the filter topology most commonly used today, namely the LC filter, does not provide economical advantage over the hybrid filter structure. Finally, some of the typical control system solutions are introduced and their shortcomings are presented. As a solution to the customer-end voltage regulation problem, an observer-based control scheme is proposed. It is shown how different control system structures affect the performance. The performance meeting the requirements is achieved by using only one output measurement, when operating in a rigid network. Similar performance can be achieved in a weak grid by DC voltage measurement. An additional improvement can be achieved when an adaptive gain scheduling-based control is introduced. As a conclusion, the final power quality is determined by a sum of various factors, and the thesis provides the guidelines for designing the system that improves the power quality experienced by the customer.

Customer consciousness in the production process of a steel factory

The purpose of this thesis is to examine the level of customer consciousness of the production process employees in a steel factory and to investigate the methods of internal marketing in order to propose development practices to enhance the customer consciousness of the case company employees. The significance of the level of customer consciousness is discussed and practices already implemented affecting the level of customer consciousness in the company are examined. The literature review gives an insight to the role of customer consciousness in the CRM philosophy of a manufacturing company and examines the means of internal marketing in enhancing customer consciousness. In the empirical part of the study, the level and significance of customer consciousness is determined by conducting individual and focus group interviews. The interviews are also used to examine the practices that could function in enhancing the customer consciousness of the employees. Development suggestions to improve the level of customer consciousness in the production process are given based on the results. The level of customer consciousness is at a poor level in the production process and influences above all on work motivation and job satisfaction, but possibly on customer satisfaction as well. The enhancement of customer consciousness in the production process should be done e.g. by ensuring the distribution of right knowledge coherently to all of the employees, gathering large customer reference database to exploit in work and in training, using visual illustration in presenting the customer information, training proactively and letting the employees to participate in the customer oriented development activities. Customer satisfaction focused reward system can be considered.

Teollisuuden kunnossapitopalveluiden kustannusmalli yritysverkostossa

Tämän tutkimuksen päätavoitteena oli luoda yleisellä tasolla teollisuuden kunnossapitopalveluille kustannusmalli käytännön päätöstilanteiden avuksi. Kustannusmallin tarkoitus oli, että sitä voidaan käyttää kaikissa päätöstilanteissa, joissa pyritään vaikuttamaan kunnossapidon aiheuttamiin kustannuksiin, joko kunnossapitopalveluiden tarjoajan tai asiakkaan tai molempien toimesta. Kustannusmalli eroaa perinteisistä kustannusmalleista näkökulmansa osalta. Aiemmin kehitetyissä teollisuuden kunnossapitopalveluiden kustannusmalleissa on esitetty palveluntarjoajan omat kustannukset tai asiakkaan kustannukset, mutta ei molempia kustannuksia samanaikaisesti. Kustannusmallia testattiin pienessä yritysverkostossa, johon kuului Sellutehdas, Kunnossapitoyhtiö ja Laitetoimittaja. Verkostossa kunnossapitoprosesseja tutkittiin tapaustutkimuksen keinoin. Tutkittuja tapauksia oli yhteensä kolme kappaletta, joista kaikki sijoittuivat sellun valmistusprosessin eri vaiheisiin ja ne olivat luonteeltaan hyvin erilaisia. Työn teoriaosa pohjautuu pääasiassa teollisuuden kunnossapitoa käsitteleviin artikkeleihin, tutkimuksiin ja kirjoihin. Lisäksi käsitellään hinnoittelun ja kustannuslaskennan teoriaa. Työn empiirinen osa perustuu haastatteluihin ja yrityksiltä saatuihin kustannustietoihin. Haastattelujen ja kustannustietojen avulla testattiin kustannusmallia. Testauksen jälkeen analysoitiin saatuja tuloksia ja kustannusmallia. Työn keskeiset tulokset liittyivät siihen, mitä kustannuksia tulee huomioida kustannusmallissa ja millainen on käyttökelpoinen kustannusmalli. Kustannusmallin käyttöön ja kehittämiseen liittyi myös ongelmia, jotka tuodaan työn loppuvaiheessa esille. Keskeinen ongelma mallin käytössä oli, että yritysverkoston osapuolet eivät halunneet avata euromääräisiä kustannustietojaan vielä toisilleen. Tämän vuoksi kustannusmallissa esitetään ainoastaan kustannuserien prosentuaalisia osuuksia yritysten aiheutuneista kunnossapidon kokonaiskustannuksista. Pelkkien prosentuaalisten kustannusten analysoiminen oli haasteellisempaa, koska esimerkiksi kustannusten suuruusluokka näkyy vain euroissa.

Strategic supply chain alignment to customer buying behavior

In search for competitive advantage, designing and managing supply chain networks have become a necessary competence for organizations. The target of this thesis is to answer a question, how to design a multiple supply chain network. The purpose is to study, what kind of different supply chain designs exist and, how to choose appropriate supply chain designs for a company. In the thesis, the focus is on the supply chain alignment to customers, more specifically to customer buying behavior. The research method was a case study. A framework for measuring customer buying behavior was developed based on the literature and it was used in the study of customer buying behavior in the case environment. In the case company structured interviews and data records were used as sources of evidence. Persons working in the customer-interface were interviewed face-to-face and through an e-mail questionnaire. When analyzing the data, a Quality function deployment matrix was used as one analysis method. As a result of the thesis, supply chain network of the case company is proposed to be divided into three separate supply chains, which focus on different areas and they could be called lean, agile and continuous replenishment supply chains. In conclusion, in the supply chain alignment to customer buying behavior several aspects have to be studied from different perspectives. According to the results, a multiple supply chain strategy is recommended to be implemented in the case company, since the diversity of the customer needs cannot be managed efficiently through a single supply chain.

Creating a Performance Measurement System for Accounting Services of Large Paper Company

The main objective of this research is creating a performance measurement system for accounting services of a large paper industry company. In this thesis there are compared different performance measurement system and then selected two systems, which are presented and compared more detailed. Performance Prism system is the used framework in this research. Performance Prism using success maps to determining objectives. Model‟s target areas are divided into five groups: stakeholder satisfaction, stakeholder contribution, strategy, processes and capabilities. The measurement system creation began by identifying stakeholders and defining their objectives. Based on the objectives are created success map. Measures are created based on the objectives and success map. Then is defined needed data for measures. In the final measurement system, there are total just over 40 measures. Each measure is defined specific target level and ownership. Number of measures is fairly large, but this is the first version of the measurement system, so the amount is acceptable.

Customer Driven Service Development – Technology-based Care and Services for the Elderly

The objective of this master’s thesis was to examine technology-based smart home devices and services. Topic was approached through basic theories, transaction cost theory and resource-based view in order to build basis for this thesis. Conceptual framework was discussed by means of networks, value networks and service systems which provide a useful framework for service development. The needs of the elderly living at home were discussed in order to find out which technology-based services could be used to satisfy the needs. Segmentation and need data collected previously during proactive home visits was exploited and additionally a survey targeted to experts and professionals of social and health care sector was done to verify the needs. Finally, the results of the survey were analyzed using quality function deployment method to figure out the most important and suitable service offerings for the elderly. As a conclusion of analysis, social media and monitoring services are the most useful technology-based services. However, traditional home services will still maintain their necessity too.

Components of customer value in nurse call solutions

This study aimed to identify the value components of nurse call solutions. The value creation of such systems was analyzed by using a framework that was created based on the existing customer value literature. The empirical part of the study was conducted as a multiple-case study by using qualitative research methods. The data for the analysis was gathered through structured interviews in ten Finnish eldercare centers. The results indicate that a nurse call solution creates value for eldercare centers by increasing the safety of the residents, and by improving the efficiency of the staff while also providing cost savings.