Determining risk potential through accidents and near-accidents: an empirical study in a steel factory

Fatal and permanently disabling accidents form only one per I cent of all occupational accidents but in many branches of industry they account for more than half the accident costs. Furthermore the human suffering of the victim and his family is greater in severe accidents than in slight ones. For both human and economic reasons the severe accident risks should be identified befor injuries occur. It is for this purpose that different safety analysis methods have been developed . This study shows two new possible approaches to the problem.. The first is the hypothesis that it is possible to estimate the potential severity of accidents independent of the actual severity. The second is the hypothesis that when workers are also asked to report near accidents, they are particularly prone to report potentially severe near accidents on the basis of their own subjective risk assessment. A field study was carried out in a steel factory. The results supported both the hypotheses. The reliability and the validity of post incident estimates of an accident's potential severity were reasonable. About 10 % of accidents were estimated to be potentially critical; they could have led to death or very severe permanent disability. Reported near accidents were significantly more severe, about 60 $ of them were estimated to be critical. Furthermore the validity of workers subjective risk assessment, manifested in the near accident reports, proved to be reasonable. The studied new methods require further development and testing. They could be used both in routine usage in work places and in research for identifying and setting the priorities of accident risks.

Strategic groups and performance: an empirical analysis of strategic groups in the wind energy industry in Europe

The strategic group theory provides an intermediate level of analysis between a single company and the whole industry for identifying issues about the company's competitive position and strategic choices. Strategic groups are companies within an industry with similar strategic characteristics or competing on similar bases. Strategic choices are aligned with the firms’ resources. The purpose of this study was to identify the strategic groups in the wind energy industry in Europe, and study, whether a certain group membership results in financial performance differences. Altogether 80 European wind energy companies were included in the study, which were clustered into four strategic groups according to their age and growth rate. Each group corresponds to a different strategy. The results show that the wind energy companies can be clustered according to the chosen strategic characteristics. Strategic decisions were investigated with characteristic variables. Performance variables were used in the analysis measuring profitability, liquidity and solvency of the groups. These strategic choices of the companies did not have a significant influence on the firms’ performance. The more mature and slower growing group proved to be the most successful. However, the differences between groups were generally not statistically significant. The only statistically significant difference found was in the solvency ratio between Mature Slow and Young Rapid groups. Measured with these variables, more mature and slower growing companies performed better. Therefore, a certain strategic group membership results in performance differences.

Supplier relationship management capability in the firm's global integration

Organizing is a general problem for global firms. Firms are seeking a balance between responsiveness at the local level and efficiency through worldwide integration. In this, supply management is the focal point where external commercial supply market relations are connected with the firm's internal functions. Here, effective supplier relationship management (SRM) is essential. Global supply integration processes create new challenges for supply management professionals and new capabilities are required. Previous research has developed several models and tools for managers to manage and categorize different supplier relationship types, but the role of the firm's internal capability of managing supplier relationships in their global integration has been a clearly neglected issue. Hence, the main objective of this dissertation is to clarify how the capability of SRM may influence the firm's global competitiveness. This objective is divided into four research questions aiming to identify the elements of SRM capability, the internal factors of integration, the effect of SRM capability on strategy and how SRM capability is linked with global integration. The dissertation has two parts. The first part presents the theoretical approaches and practical implications from previous research and draws a synthesis on them. The second part comprises four empirical research papers addressing the research questions. Both qualitative and quantitative methods are utilized in this dissertation. The main contribution of this dissertation is that it aggregates the theoretical and conceptual perspectives applied to SRM research. Furthermore, given the lack of valid scales to measure capability, this study aimed to provide a foundation for an SRM capability scale by showing that the construct of SRM capability is formed of five separate elements. Moreover, SRM capability was found to be the enabler in efforts toward value chain integration. Finally, it was found that the effect of capability on global competitiveness is twofold: it reduces conflicts between responsiveness and integration, and it creates efficiency. Thus, by identifying and developing the firm's capabilities it is possible to improve performance, and hence, global competitiveness.

Probiotic lactobacilli and bifidobacteria in the mouth – in vitro studies on saliva-mediated functions and acid production

Probiotic lactobacilli and bifidobacteria in the mouth – in vitro studies on saliva-mediated functions and acid production Probiotics are viable bacteria which, when used in adequate amounts, are beneficial to the health of the host. Although most often related to intestinal health, probiotic bacteria can be found also in the mouth after consumption of products that contain them. This study aimed at evaluating the oral effects of probiotic bacteria already in commercial use. In a series of in vitro studies, the oral colonisation potential of different probiotic bacteria, their acid production and potential saliva-mediated effects on oral microbial ecology were investigated. The latter included effects on the salivary pellicle, the adhesion of other bacteria, and the activation of the peroxidase system. Streptococcus mutans, Streptococcus gordonii, Aggregatibacter actinomycetemcomitans and Helicobacter pylori were used as bacterial indicators of the studied phenomena. There were significant differences between the probiotic strains in their colonisation potential. They all were acidogenic, although using different sugars and sugar alcohols. However, their acid production could be inhibited by the peroxidase system. Based on the results, it can be suggested that probiotic bacteria might influence the oral microbiota by different, partly species or strain-specific means. These include the inhibition of bacterial adhesion, modification of the enamel pellicle, antimicrobial activity, and activation of the peroxidase system. To conclude, probiotic strains differed from each other in their colonisation potential and other oral effects as evaluated in vitro. Both positive and potentially harmful effects were observed, but the significance of the perceived results needs to be further evaluated in vivo.

Web 2.0 technology assisted global knowledge network as an organizations key asset

Aim of the Thesis is to study and understand the theoretical concept of Metanational corporation and understand how the Web 2.0 technologies can be used to support the theory. Empiric part of the study compares the theory to the case company’s current situation Goal of theoretical framework is to show how the Web 2.0 technologies can be used in the three levels of the Metanational corporation. In order to do this, knowledge management and more accurately knowledge transferring is studied to understand what is needed from the Web 2.0 technologies in the different functions and operations of the Metanational corporation. Final synthesis of the theoretical framework is to present a model where the Web 2.0 technologies are placed on the levels of the Metanational corporation. Empirical part of the study is based on interviews made in the case company. Aim of the interviews is to understand the current state of the company related to the theoretical framework. Based on the interviews, the differences between the theoretical concept and the case company are presented and studied. Finally the study presents the found problem areas, and where the adoption of the Web 2.0 tools is seen as beneficiary, based on the interviews and theoretical framework.

Customer reference marketing in a business to business context

This study focuses on the phenomenon of customer reference marketing in a business tobusiness (B to B) context. Although customer references are generally considered an important marketing and sales tool, the academic literature has paid surprisingly little attention to the phenomenon. The study suggests that customer references could be viewed as important marketing assets for industrial suppliers, and the ability to build, manage and leverage customer reference portfolios systematically constitutes a relevant marketing capability. The role of customer references is examined in the context of the industrial suppliers' shift towards a solution and project orientation and in the light of the on going changes in the project business. Suppliers in several industry sectors are undergoing a change from traditional equipment manufacturing towards project and solution oriented business. It is argued in this thesis that the high complexity, the project oriented nature and the intangible service elements that characterise many contemporary B to B offerings further increase the role of customer references. The study proposes three mechanisms of customer reference marketing: status transfer, validation through testimonials and the demonstration of experience and prior performance. The study was conducted in the context of Finnish B to B process technology and information technology companies. The empirical data comprises 38 interviews with managers of four case companies, 165 customer reference descriptions gathered from six case companies' Web sites, as well as company internal material. The findings from the case studies show that customer references have various external and internal functions that contribute to the growth and performance of B to B firms. Externally, customer references bring status transfer effects from reputable customers, concretise and demonstrate complex solutions, and provide indirect evidence of experience, previous performance, technological functionality and delivered customer value. They can also be leveraged internally to facilitate organisational learning and training, advance offering development, and motivate personnel. Major reference projects create new business opportunities and can be used as a vehicle for strategic change. The findings of the study shed light on the on going changing orientations in the project business environment, increase understanding of the variety of ways in which customer references can be deployed as marketing assets, and provide a framework of the relevant tasks and activities related to building, managing and leveraging a firm's customer reference portfolio. The findings contribute to the industrial marketing research, to the literature on marketing assets and capabilities and to the literature on projects and solutions. The proposed functions and mechanisms of customer reference marketing bring a more thorough and structured understanding about the essence and characteristics of the phenomenon and give a wide ranging view of the role of customer references as marketing assets for B to B firms. The study suggests several managerial implications for industrial suppliers in order to systematise customer reference marketing efforts.

Strategic choices and performance – an empirical analysis of largest European and North American energy companies

Energy industry has gone through major changes globally in past two decades. Liberalization of energy markets has led companies to integrate both vertically and horizontally. Growing concern on sustainable development and aims to decrease greenhouse gases in future will increase the portion of renewable energy in total energy production. Purpose of this study was to analyze using statistical methods, what impacts different strategic choices has on biggest European and North American energy companies’ performance. Results show that vertical integration, horizontal integration and use of renewable energy in production had the most impact on profitability. Increase in level of vertical integration decreased companies’ profitability, while increase in horizontal integration improved companies’ profitability. Companies that used renewable energy in production were less profitable than companies not using renewable energy.

Virtaviivainen hankintatoimi osana tuotantoprosessia

Tutkimuksessa on pyritty löytämään tuotantoprosessin läpimenoa haittaavia ohjaus- ja toimintatapoja sekä tiedonkulusta aiheutuvia ongelmia. Tutkimuksen tavoitteena on saada toimittajien, hankintatoimen ja tuotannon logistinen arvoverkko toimimaan virtaviivaisesti. Työssä on käytetty teoriaosassa kirjallisuustutkimusta ja empiirisessä osassa toimintatutkimusta. Nykytilan selvityksessä tutkittiin prosessin tieto- ja materiaalivirrat sekä mitkä ovat tärkeimmät toiminnot toimitusketjussa. Tutkimuksen ja prosessianalyysin pohjalta määriteltiin kehitysehdotukset prosessin toimintojen tehostamiseksi. Nykytilan kartoituksessa ilmeni suurimmiksi ongelmiksi logistiikka prosessissa voimakkaan kysynnän kasvusta aiheutuvat komponenttien ja raaka-aineiden saatavuusongelmat sekä pudonneen kysynnän seurauksena varastoihin sitoutunut ylimääräinen vaihto-omaisuus. Tutkimuksen tuloksena syntyi kehitysehdotuksia, joiden pohjalta uudistettavaan toiminnanohjausjärjestelmään voitaneen toteuttaa johtopäätöksissä ilmenevät asiat, joista merkityksellisin on myynnin ennustamisvastuun siirtäminen myynnistä tulosvastuussa oleville henkilöille.

Stress testing practices in risk management - Empirical evidence from the Finnish banking and insurance sectors

The main purpose of this study was to analyze how stress tests are used in risk management in the Finnish banking and insurance sectors. In order to enhance understanding of the topic, stress testing was explored in the context of corporate governance and regulato-ry implications of Basel II and Solvency II on stress testing were examined. In addition, the effects of the global financial crisis on stress testing were mapped and the differences in stress testing practices between the banking and insurance sector were discussed. The research method was qualitative case study and it was conducted by interviewing risk managers from ten institutions and a representative from FIN-FSA. Findings pointed out that stress testing practices vary significantly between different institutions. Interesting observations were made in terms of stress testing practices in the banking and insurance sectors. The increasing importance and use of stress tests were recognized as a result of the financial crisis. Stress testing was even considered more like art than science given the amount of challenges it involves. In general, improvements in stress tests were suggested, with an emphasis on stress concentration between different types of risks.

Project and customer profitability analysis: an empirical case study

The objective of this case study is to provide a Finnish solution provider company an objective, in-depth analysis of their project based business and especially of project estimation accuracy. A project and customer profitability analysis is conducted as a complementary addition to describe profitability of the Case Company’s core division. The theoretical framework is constructed on project profitability and customer profitability analysis. Project profitability is approached starting from managing projects, continuing to project pricing process and concluding to project success. The empirical part of this study describes the Case Company’s project portfolio, and by means of quantitative analysis, the study describes how the characteristics of a project impact the project’s profitability. The findings indicate that it really makes a difference in project portfolio’s estimated and actual profitability when methods of installation and technical specifications are scrutinized. Implications on profitability are gathered into a risk assessment tool proposal.

Nursing Ethics Education in Finland from the Perspective of Codes of Ethics

The purpose of this study was to analyze nursing ethics education from the perspective of nurses’ codes of ethics in the basic nursing education programmes in polytechnics in Finland with the following research questions: What is known about nurses’ codes in practice and education, what contents of the codes are taught, what teaching and evaluation methods are used, which demographic variables are associated with the teaching, what is nurse educators’ adequacy of knowledge to teach the codes and nursing students’ knowledge of and ability to apply the codes, and what are participants’ opinions of the need and applicability of the codes, and their importance in nursing ethics education. The aim of the study was to identify strengths and possible problem areas in teaching of the codes and nursing ethics in general. The knowledge gained from this study can be used for developing nursing ethics curricula and teaching of ethics in theory and practice. The data collection was targeted to all polytechnics in Finland providing basic nursing education (i.e. Bachelor of Health Care). The target groups were all nurse educators teaching ethics and all graduating nursing students in the academic year of 2006. A total of 183 educators and 214 students from 24 polytechnics participated. The data was collected using a structured questionnaire with four open-ended questions, designed for this study. The data was analysed by SPSS (14.0) and the open-ended questions by inductive content analysis. Descriptive statistics were used to summarize the data. Inferential statistics were used to estimate the differences between the participant groups. The reliability of the questionnaire was estimated with Cronbach’s coefficient alpha. The literature review revealed that empirical research on the codes was scarce, and minimal in the area of education. Teaching of nurses’ codes themselves and the embedded ethical concepts was extensive, teaching of the functions of the codes and related laws and agreements was moderate, but teaching of the codes of other health care professions was modest. Issues related to the nurse-patient relationship were emphasised. Wider social dimensions of the codes were less emphasized. Educators’ and students’ descriptions of teaching emphasized mainly the same teaching contents, but there were statistically significant differences between the groups in that educators assessed their teaching to be more extensive than what students had perceived it had been. T he use of teaching and evaluation methods was rather narrow and conventional. However, educators’ and students’ descriptions of the used methods differed statistically significantly. Students’ knowledge of the codes and their ability to apply them in practice was assessed as mediocre by educators and by students themselves. Most educators assessed their own knowledge of the codes as adequate to teach the codes, as did most of the students. Educators who regarded their knowledge as adequate taught the codes more extensively than those who assessed their knowledge as less adequate. Also students who assessed their educators’ knowledge as adequate perceived the teaching of the codes to be more extensive. Otherwise educators’ and students’ demographic variables had little association with their descriptions of the teaching. According to the participants, nurses need their own codes, and they are also regarded as applicable in practice. The codes are an important element in nursing ethics education, but their teaching needs development. Further research should focus on the organization of ethics teaching in the curricula, the teaching process, and on the evaluation of the effectiveness of ethics education and on educators’ competence. Also the meaning and functions of the codes at all levels of nursing deserve attention. More versatile use of research methods would be beneficial in gaining new knowledge.

Accounting Beta Measuring Systematic Risk: Empirical Evidence from the Finnish Markets

The main purpose of this study is to examine whether accounting-based variables can be used to measure systematic risk of a company using Finnish data. When the fundamental sources of systematic risk are known, companies are able to manage these risks and increase company value. Accounting beta was formed based on OLS regression models. Theoretical background for the study was based on the findings of studies according to which business risk, financial risk, operating risk and growth risk can be theoretically regarded as determinants of the systematic risk. The results reveal that accounting variables describe systematic risk of a company. The accounting beta is found to be particularly sensitive to the changes in the risk components. The investigation is confidential until 15.10.2012.

Analysis of electricity distribution network operation business models and capitalization of control room functions with DMS

Electricity distribution network operation (NO) models are challenged as they are expected to continue to undergo changes during the coming decades in the fairly developed and regulated Nordic electricity market. Network asset managers are to adapt to competitive technoeconomical business models regarding the operation of increasingly intelligent distribution networks. Factors driving the changes for new business models within network operation include: increased investments in distributed automation (DA), regulative frameworks for annual profit limits and quality through outage cost, increasing end-customer demands, climatic changes and increasing use of data system tools, such as Distribution Management System (DMS). The doctoral thesis addresses the questions a) whether there exist conditions and qualifications for competitive markets within electricity distribution network operation and b) if so, identification of limitations and required business mechanisms. This doctoral thesis aims to provide an analytical business framework, primarily for electric utilities, for evaluation and development purposes of dedicated network operation models to meet future market dynamics within network operation. In the thesis, the generic build-up of a business model has been addressed through the use of the strategicbusiness hierarchy levels of mission, vision and strategy for definition of the strategic direction of the business followed by the planning, management and process execution levels of enterprisestrategy execution. Research questions within electricity distribution network operation are addressed at the specified hierarchy levels. The results of the research represent interdisciplinary findings in the areas of electrical engineering and production economics. The main scientific contributions include further development of the extended transaction cost economics (TCE) for government decisions within electricity networks and validation of the usability of the methodology for the electricity distribution industry. Moreover, DMS benefit evaluations in the thesis based on the outage cost calculations propose theoretical maximum benefits of DMS applications equalling roughly 25% of the annual outage costs and 10% of the respective operative costs in the case electric utility. Hence, the annual measurable theoretical benefits from the use of DMS applications are considerable. The theoretical results in the thesis are generally validated by surveys and questionnaires.

On the development of object functions and restrictions for shapes made with a turret punch press

This study presents the information required to describe the machine and device resources in the turret punch press environment which are needed for the development of the analysing method for automated production. The description of product and device resources and their interconnectedness is the starting point for method comparison the development of expenses, production planning and the performance of optimisation. The manufacturing method cannot be optimized unless the variables and their interdependence are known. Sheet metal parts in particular may then become remarkably complex, and their automatic manufacture may be difficult or, with some automatic equipment, even impossible if not know manufacturing properties. This thesis consists of three main elements, which constitute the triangulation. In the first phase of triangulation, the manufacture occuring on a turret punch press is examined in order to find the factors that affect the efficiency of production. In the second phase of triangulation, the manufacturability of products on turret punch presses is examined through a set of laboratory tests. The third phase oftriangulation involves an examination of five industry parts. The main key findings of this study are: all possible efficiency in high automation level machining cannot be achieved unless the raw materials used in production and the dependencies of the machine and tools are well known. Machine-specific manufacturability factors for turret punch presses were not taken into account in the industrial case samples. On the grounds of the performed tests and industrial case samples, the designer of a sheet metal product can directly influence the machining time, material loss, energy consumption and the number of tools required on a turret punch press by making decisions in the way presented in the hypothesis of thisstudy. The sheet metal parts to be produced can be optimised to bemanufactured on a turret punch press when the material to be used and the kinds of machine and tool options available are known. This provides in-depth knowledge of the machine and tool properties machine and tool-specifically. None of the optimisation starting points described here is a separate entity; instead, they are all connected to each other.