Raideliikenteen opastimien valoyksiköiden koteloiden tuotekehitys

Nykyisin raideliikenteen käytössä olevan opastinjärjestelmän mukaiset opastimet ovat kunnossapidollisesti erittäin haastavia. Niiden korkeus aiheuttaa kunnossapitohenkilöstölle työturvallisuusriskin ja monimutkaiset opastinulokkeet ja - portaalit ovat kalliita rakentaa. Nykyisin käytössä oleva opastinjärjestelmä onkin tarkoitus korvata Opastinjärjestelmä 2010 -nimisellä järjestelmällä, jonka kehitystyö on aloitettu Ratahallintokeskuksessa vuonna 2006. Tämä diplomityö on osa kyseistä kehitystyötä. Työn tarkoituksena on raideliikenteen käyttöön tulevien Opastinjärjestelmä 2010:n mukaisten opastimien valoyksiköiden koteloiden rakenteen suunnittelu ja materiaalinvalinta. Suunnittelutyöhön sisältyvät myös valoyksiköiden häikäisysuojien suunnittelu, sekä opastimien koteloiden liittäminen opastimien jalkoihin. Uusille opastimille suunnitellaan myös putkipaaluperustus. Opastinjärjestelmä 2010:n mukaisten opastimien myötä opastinten sijoittelua voidaan parantaa, ja niiden kunnossapito helpottuu. Uuden järjestelmän opastimien kotelot tarjoavat opastimien valoyksiköille entistä avointa levyrakennetta paremman ilkivaltasuojan. Uusissa opastimissa otetaan käyttöön LED-valoyksiköt, joka vähentää kunnossapitokustannuksia lamppujen vaihtotarpeen pienentyessä.

Research of wood fuel market in Ukraine and the Republic of Belarus

The goal of the present work was to describe the wood fuel market of Ukraine and the Republic of Belarus, to estimate wood fuel potential and to research opportunities of wood fuel trading. Nowadays the wood waste, wood residues and by-products are becoming more and more potential raw materials for energy production. Against the background of unstable prices of traditional energy sources and environmental degradation, European States are planning to get 12% of energy from alternative sources already in 2010. Wastes of wood-working and agricultural productions are such sources. At present time the most popular wood biofuels are wood pellets, briquettes, wood chips and logs. Ukraine and the Republic of Belarus have a rather big potential of wood fuel resources. But wood fuels markets of these countries are on the entry level and quite disorganized. There is almost no domestic usage of wood biofuel. All produced pellets, briquettes as well as wood chips and logs go to the export, but the volumes are not high at present time. Ukraine and the Republic of Belarus have a very suitable geographical location. The most promising directions of wood fuel trading are developed wood fuel markets of Northern countries, Austria, Germany as well as actively developing markets of Poland and Hungary. At the long distance truck and sea transportation are the most appropriate. At a short distance cheap transportation by rail is more suitable. Thereby export is a potential opportunity for development of wood fuel production and in the future for usage in the researched countries.

The governmental organization's role in railway freight market's liberalization -building knowledge through Swedish and Polish operators' experiences

Globalization has increased transport aggregates’ demand. Whilst transport volumes increase, ecological values’im portance has sharpened: carbon footprint has become a measure known world widely. European Union together with other communities emphasizes friendliness to the environment: same trend has extended to transports. As a potential substitute for road transport is noted railway transport, which decreases the congestions and lowers the emission levels. Railway freight market was liberalized in the European Union 2007, which enabled new operators to enter the markets. This research had two main objectives. Firstly, it examined the main market entry strategies utilized and the barriers to entry confronted by the operators who entered the markets after the liberalization. Secondly, the aim was to find ways the governmental organization could enhance its service towards potential railway freight operators. Research is a qualitative case study, utilizing descriptive analytical research method with a normative shade. Empirical data was gathered by interviewing Swedish and Polish railway freight operators by using a semi-structured theme-interview. This research provided novel information by using first-hand data; topic has been researched previously by utilizing second-hand data and literature analyses. Based on this research, rolling stock acquisition, needed investments and bureaucracy generate the main barriers to entry. The research results show that the mostly utilized market entry strategies are start-up and vertical integration. The governmental organization could enhance the market entry process by organizing courses, paying extra attention on flexibility, internal know-how and educating the staff.

Unitizing in Supply Chain – Case SECU Container

The aim of this thesis is to analyze how increasing the level of unitizing affects to the costs in the transport system of a Finnish paper and board company. The parts of the supply chain where costs are analyzed are limited to domestic inland transport and port operations. Supply Chain management is important aspect of modern day companies’ strategies. Intermodal transport and different transport systems are the key items which are studied in the theory part of this thesis. In the case study the payload simulations for SECU container (Stora Enso Cargo Unit) stuffed in mills sites are base of the cost analyze of this thesis. Thesis also makes a glance for the restrictions and development trends in Finnish railroads. In analyze SECU containers are moved up to the mill site for stuffing. This increases the level of unitizing in supply chain. Analyze is made for three variation of current traffic lines. Analyze shows that when idea of intermodalism is well used there is considerable cost savings to gather in pre-transportation and port operations. But also effects to mill sites and destination ports needs to be take under considering. In analyze the effects of increased axle weight for SECU container transportation in Finnish railroads is studied. When transport unit is stuffed in earliest possible point supply chain and unloaded the last possible point the savings made in chain can be considerable. In case study of this thesis almost 40% savings in total costs could be reached in pre transportation and port operations when unitizing level is increased in supply chain.

Rautateiden henkilöliikenteen kehitys Baltian maissa

Työn tavoitteena oli selvittää, millaisia muutoksia Viron, Latvian ja Liettuan rautateiden henkilöliikenteessä on tapahtunut neuvostoajan lopun ja tämän päivän välillä. Tarkastelupisteiksi valittiin vuodet 1991, 1997, 2002 ja 2009. Tutkimuksen tavoitteena oli myös selvittää muutoksiin vaikuttaneita taustatekijöitä, kuvata nykytilannetta ja tarkastella tulevaisuuden vaihtoehtoisia kehityspolkuja. Tutkimuksen tulosten perusteella rautateiden henkilöliikenteen määrä on supistunut noin puoleen kaikissa kolmessa maassa tarkasteltuna junakilometrien viikoittaisella määrällä. Matkustajamäärät ovat laskeneet kaikissa kolmessa maassa selvästi tarkastelujakson aikana. Syitä rautateiden henkilöliikenteen supistumiseen ovat olleet mm. kireä kilpailu linja-autoliikenteen kanssa ja lisääntynyt henkilöautojen käyttö. 1990-luvun taloudellisesti vaikeina vuosina rautateillä ei ollut mahdollisuuksia uusia kalustoaan. Kansainvälinen talouskriisi ja sen myötä heikentynyt taloudellinen tilanne kaikissa kolmessa maassa muodostaa uuden uhan rautateiden henkilöliikenteelle. Korkeat rataverkon käyttömaksut toimivat tehokkaana esteenä henkilöliikenteen kehittämiselle.

Junan audiovahvistimen laitesuunnittelu

Joukkoliikenteen merkitys suurten ihmismäärien liikuttamisessa on kasvanut. Kaupunkikeskustat ovat monin paikoin ruuhkautuneet ja joukkoliikenteestä pyritään tekemään mahdollisimman houkuttelevaa ruuhkien helpottamiseksi. Yksi keino houkutella ihmisiä joukkoliikennevälineiden käyttäjiksi on parantaa matkustajille tarjottavan informaation määrää ja laatua. Matkustajainformaatiojärjestelmä on monipuolinen kokonaisuus, jolla joukkoliikenteen käyttäjälle tarjotaan muun muassa opastusta, aikataulutietoa ja häiriötietoa. Informaatio voi olla staattista kuten painetut aikataulut ja kiinteät opasteet tai dynaamista kuten reaaliaikaiset näytöt ja kuulutukset. Informaatiota voidaan tarjota matkustajan käyttöön niin kotona ja liikenneasemilla kuin liikkuvassa kalustossakin. Matkustajainformaatiojärjestelmiä on käytössä erilaisissa joukkoliikennevälineissä, joista tässä diplomityössä syvennytään raideliikenteeseen. Työssä suunnitellaan ja toteutetaan raideliikenteen vaatimukset täyttävä IP-pohjainen audiovahvistin. Valmis vahvistin liittyy Ethernet-verkon välityksellä raideliikenteen matkustajainformaatio-järjestelmään. Laite toimii kuulutus- ja puhelinjärjestelmän keskusyksikkönä. Työn tuloksena saatiin toimiva ja sarjatuotantokelpoinen audiovahvistin. Laitteen tyyppitestit ovat tätä työtä palautettaessa vielä kesken, mutta tähän mennessä testit ovat menneet hyvin ja laite on toiminut hyvin myös osana järjestelmää.

Financial and Environmental Impacts of a Dry Port to Facilitate Competitiveness of Two Major Transit Seaports of Finland

Environmental problems and issues have received more and more attention during the last decades. Reasons for this are different increased external costs such as congestion, CO2 emission, noise and accident costs. Transportation sector is the only sector with increasing external costs. The EU will increase its attention in decreasing the external costs of transport. Aim of this research was to find out if a dry port solution could decrease costs of transport, especially external costs. Dry port concept is an intermodal transport system, where inland transport between port and dry port is performed by rail transport instead of traditional road transport. In addition, dry ports offer similar services as ports. Research is conducted by performing a literature review about dry port concept and costs of transport, especially external costs of transport. Financial and environmental impacts of the dry port concept are studied by comparing costs of road and rail transport by cost accounting and with a simulation model. Location of dry port is researched with gravitational models. Results of the literature review are that rail transport is environmentally friendlier mode of transport than road transport. Cost model and simulation model show that if only costs of freight movement are considered, rail transport is more inexpensive transport mode than road transport in terms of internal and external costs. Because of that dry port concept could decrease costs of transport, especially external costs. Results of gravitational models are that city of Kouvola is in a good position to be a dry port. Russian transit traffic through Finland improves location of Kouvola to be a dry port.

Painelaitteen hitsauksen kehittäminen

Työ tehtiin Steris Finn Aqualle, joka oli ottanut tuotantoon uuden autoklaavimallin kevään 2007 aikana. Työn tavoitteena oli kehittää painelaitteen hitsausta vertailemalla kevytmekanisointi, mekanisointi ja robotisointiratkaisuja ja hankkia riittävät tiedot mahdollisen investointipaatoksen tueksi. Tarkastellut kevytmekanisointilaitteet koostuivat kuljetinkiskosta, kuljettimesta ja mahdollisesta railonseurantalaitteesta. Tarkasteltu mekanisointijärjestelmä oli asiakaskohtaisesti räätälöitävä kokonaisuus. Tarkasteltuun hitsausrobottijärjestelmään kuului kappaleenkäsittelylaite sekä etäohjelmointiohjelmisto. Työn teoriaosassa käsiteltiin painelaitelainsäädännön vaikutuksia tuotantoon, ruostumattoman ja haponkestävän teräksen ominaisuuksia hitsauksen kannalta, tuotannossa käytettäviä hitsausprosesseja, hitsauksen mekanisointia ja automatisointia sekä railonseurantaa. Työn käytännön osuudessa käytiin läpi painelaitevalmistuksen nykytila. Painelaitevalmistus jaettiin eri työvaiheisiin ja työvaiheet analysoitiin, millä varmistettiin, että kehitysresurssit suunnataan oikeisiin kohteisiin. Kehitysehdotuksena esitettiin joko railonseurannalla varustetun kevytmekanisointilaitteiston tai etäohjelmoitavan hitsausrobottijärjestelmän hankintaa. Kevytmekanisoinnilla on mahdollista saavuttaa samat edut kuin kalliimmillakin mekanisointilaitteilla ja kevytmekanisoinnin etuna on käyttöönoton helppous ja laitteiston edullisuus. Hitsausrobotin hankintaan liittyy epävarmuustekijöitä, joiden tarkempi selvittäminen on tarpeen, ennen hitsausrobotin hankintapaatosta. Suuremmilla tuotantomäärillä hitsausrobottisolu olisi ollut selkeästi parempi ratkaisu.

Seisontamaksuprosessin kehittäminen rautatielogistiikassa

Tämän diplomityön tavoitteena oli kehittää seisontamaksuprosessia löytämällä keinot tehostaa informaation kulkua prosessin eri osapuolten välillä, parantaa prosessin läpimenoaikaa, yhtenäistää toimintakäytäntöjä, sekä vähentää virheellisten seisontamaksulaskujen lähettämistä asiakkaille. Tietoa kerättiin haastatteluin, sähköpostikeskusteluja tutkimalla, sekä analysoimalla numeerista aineistoa seisontamaksuista. Työn teoriaosassa käsiteltiin prosesseja ja niiden kehittämistä yleisesti, muutoksen hallintaa, sekä prosessien kehittämisessä apuna toimivia valmiita kehittämismalleja. Työn empiirisessä osassa kuvattiin seisontamaksuprosessi ja löydettiin siitä suurimmat ongelmakohdat. Tiedonkulku prosessin eri osapuolten välillä osoittautui suurimmaksi ongelmien aiheuttajaksi. Ongelmiin kehitettiin ratkaisut, joiden pohjalta luotiin optimaalinen toimintamalli seisontamaksuprosessista. Lisäksi prosessin tulevan toiminnan seuraamiseksi ehdotettiin erilaisia mittareita. Kehitettyjen ratkaisujen katsottiin täyttäneen kaikki yrityksen asettamat tavoitteet, mutta ratkaisujen tarkemmat vaikutukset prosessin toimintaan näkyvät kuitenkin vasta niiden käyttöönoton jälkeen.

Modeling and Analysis of Noise and Interconnects for On-Chip Communication Link Design

This thesis considers modeling and analysis of noise and interconnects in onchip communication. Besides transistor count and speed, the capabilities of a modern design are often limited by on-chip communication links. These links typically consist of multiple interconnects that run parallel to each other for long distances between functional or memory blocks. Due to the scaling of technology, the interconnects have considerable electrical parasitics that affect their performance, power dissipation and signal integrity. Furthermore, because of electromagnetic coupling, the interconnects in the link need to be considered as an interacting group instead of as isolated signal paths. There is a need for accurate and computationally effective models in the early stages of the chip design process to assess or optimize issues affecting these interconnects. For this purpose, a set of analytical models is developed for on-chip data links in this thesis. First, a model is proposed for modeling crosstalk and intersymbol interference. The model takes into account the effects of inductance, initial states and bit sequences. Intersymbol interference is shown to affect crosstalk voltage and propagation delay depending on bus throughput and the amount of inductance. Next, a model is proposed for the switching current of a coupled bus. The model is combined with an existing model to evaluate power supply noise. The model is then applied to reduce both functional crosstalk and power supply noise caused by a bus as a trade-off with time. The proposed reduction method is shown to be effective in reducing long-range crosstalk noise. The effects of process variation on encoded signaling are then modeled. In encoded signaling, the input signals to a bus are encoded using additional signaling circuitry. The proposed model includes variation in both the signaling circuitry and in the wires to calculate the total delay variation of a bus. The model is applied to study level-encoded dual-rail and 1-of-4 signaling. In addition to regular voltage-mode and encoded voltage-mode signaling, current-mode signaling is a promising technique for global communication. A model for energy dissipation in RLC current-mode signaling is proposed in the thesis. The energy is derived separately for the driver, wire and receiver termination.

Development of railway logistics’ information flows

Objective of this thesis was to develop the exchange of information and reduce the manual work done in the supply chain. In addition, the possibility to introduce electronic information exchange was studied between suppliers and Borealis. The aim was to create an accurate picture of Borealis’ current information flows and create from the basis of it short- and long-term improvement and development proposals. In this study the company's received and send information flows were mapped by interviewing persons who were responsible for the railroad imports and by examining documents that are used in the exchange of information. The data content of the information flows were prioritized and only the most important information contents were used for further development. Literature data was acquired concerning knowledge of electronic data interchange and information management to support the decisions and proposals. Long-term development proposals were compared with each other and the best one of them was recommended for further study. The final target of the proposal is to be able to receive electronic data and create an own database where to the information is stored and where from it is possible to follow up the rail tank cars and where from the needed reports can be retrieved.

Cargo Traffic on the Helsinki-Tallinn Route

The twin-city model has found to increase economical activity and well-being. The similar economical, social and cultural background of Finland and Estonia as well as the EU integration give good preconditions to create a twin-city of Helsinki and Tallinn. The relatively long distance between Helsinki and Tallinn is challenging. Therefore, good transport infrastructure and functioning connections are required to form a twin-city of Helsinki and Tallinn. The connections between these cities can be considered also in broader perspective than only from the viewpoint of the twin-city concept. New markets areas have been emerged in Europe due to collapse of planned economy and integration of Europe. Also the transport routes to the markets are changing. The Hel-sinki-Tallinn sea route can be considered as a fast route to the new markets in the Cen-tral and Eastern Europe. The Helsinki-Tallinn sea route is also a potential route to the Western European markets. This study provides an analysis of transport and cargo flows between Finland and Esto-nia for regional and local planners. The main purpose of the study is to clarify the pre-sent situation of the seaborne cargo flows on the Helsinki-Tallinn route and how the cargo flows will develop in the future. The study focuses on the following thematic enti-ties: the Finnish and Estonian seaborne transport system and cargo flows, the structure and volume of the cargo flows on the Helsinki-Tallinn route, the hinterland cargo flows on the Helsinki-Tallinn route and the transport methods used on the Helsinki-Tallinn route. The study was carried out as a desk research, a statistical analysis and an inter-view study during the spring–autumn 2011. The study reveals that during the period 2002–2010 the volume of the seaborne cargo traffic between Finland and Estonia has increased significantly while the trend of the trade volume between Finland and Estonia has remained nearly constant. This indicates that the route via Estonia is increasingly used in the Finnish foreign trade. Because the ports of Helsinki and Tallinn are the main ports in the cargo traffic between Finland and Estonia, the role of the Helsinki-Tallinn route as a sea leg in the hinterland connections of Finland has increased. The growth of the cargo volume on the Helsinki-Tallinn route was estimated to continue on the annual level of 10 % during the next couple of years. In the long run the growth of the cargo volumes depends on the economical and indus-trial development of the former Eastern European countries. If the IMO’s sulphur regu-lations will come in force, the Helsinki-Tallinn route will become one of the main routes also to the Western European markets, besides of the route via Sweden. The study also shows that the fast and reliable connections year round on the Helsinki-Tallinn route have made it possible for service and logistics companies to reconsider their logistics strategies in a new way in the both side of the Gulf of Finland. Anyway, the ropax concept is seen as the only economical profitable solution on the Helsinki-Tallinn route because cargo and passenger traffic are supporting each other. The trucks (vehicle combinations) will remain the main mode of transport on the Helsinki-Tallinn route because general cargo is the main commodity on the route. IMO’s sulphur regula-tions and the changes in the structure of the Finnish industry may create prerequisites for rail road transport in the hinterland connections of Finland. The twin-city model has found to increase economical activity and well-being. The similar economical, social and cultural background of Finland and Estonia as well as the EU integration give good preconditions to create a twin-city of Helsinki and Tallinn. The relatively long distance between Helsinki and Tallinn is challenging. Therefore, good transport infrastructure and functioning connections are required to form a twin-city of Helsinki and Tallinn. The connections between these cities can be considered also in broader perspective than only from the viewpoint of the twin-city concept. New markets areas have been emerged in Europe due to collapse of planned economy and integration of Europe. Also the transport routes to the markets are changing. The Hel-sinki-Tallinn sea route can be considered as a fast route to the new markets in the Cen-tral and Eastern Europe. The Helsinki-Tallinn sea route is also a potential route to the Western European markets. This study provides an analysis of transport and cargo flows between Finland and Esto-nia for regional and local planners. The main purpose of the study is to clarify the pre-sent situation of the seaborne cargo flows on the Helsinki-Tallinn route and how the cargo flows will develop in the future. The study focuses on the following thematic enti-ties: the Finnish and Estonian seaborne transport system and cargo flows, the structure and volume of the cargo flows on the Helsinki-Tallinn route, the hinterland cargo flows on the Helsinki-Tallinn route and the transport methods used on the Helsinki-Tallinn route. The study was carried out as a desk research, a statistical analysis and an inter-view study during the spring–autumn 2011. The study reveals that during the period 2002–2010 the volume of the seaborne cargo traffic between Finland and Estonia has increased significantly while the trend of the trade volume between Finland and Estonia has remained nearly constant. This indicates that the route via Estonia is increasingly used in the Finnish foreign trade. Because the ports of Helsinki and Tallinn are the main ports in the cargo traffic between Finland and Estonia, the role of the Helsinki-Tallinn route as a sea leg in the hinterland connections of Finland has increased. The growth of the cargo volume on the Helsinki-Tallinn route was estimated to continue on the annual level of 10 % during the next couple of years. In the long run the growth of the cargo volumes depends on the economical and indus-trial development of the former Eastern European countries. If the IMO’s sulphur regu-lations will come in force, the Helsinki-Tallinn route will become one of the main routes also to the Western European markets, besides of the route via Sweden. The study also shows that the fast and reliable connections year round on the Helsinki-Tallinn route have made it possible for service and logistics companies to reconsider their logistics strategies in a new way in the both side of the Gulf of Finland. Anyway, the ropax concept is seen as the only economical profitable solution on the Helsinki-Tallinn route because cargo and passenger traffic are supporting each other. The trucks (vehicle combinations) will remain the main mode of transport on the Helsinki-Tallinn route because general cargo is the main commodity on the route. IMO’s sulphur regula-tions and the changes in the structure of the Finnish industry may create prerequisites for rail road transport in the hinterland connections of Finland.

Ohutseinämäisten putkien hitsauksen robotisointi

Tämän diplomityön tavoitteena on ollut selvittää, kuinka robotisoitua hitsausta on mahdollista hyödyntää teollisuuskaiteiden valmistuksessa. Tutkimusmenetelminä käytettiin kirjallisuusselvitystä, hitsauskokeita ja makrohietutkimuksia. Työssä keskityttiin robottihitsauksen menetelmiin ja työstä on rajattu pois kaikki kustannuslaskelmat sekä alumiinin hitsaus. Hitsattavat materiaalit olivat rakenneteräs ja ruostumaton teräs. Rakenneteräsputken koko oli 42,4 x 2,6 mm ja ruostumattoman putken koko 42,4 x 2,0 mm. Käytetyt liitosmuodot olivat T-liitoksia, joista suorassa T-liitoksessa putkien välinen kulma oli 90 astetta ja vinossa T-liitoksessa noin 45 astetta. Tehdyn selvitystyön ja hitsauskokeiden perusteella voidaan sanoa, että kaiteissa käytettävien materiaalipaksuuksien ja liitosmuotojen hitsaaminen robotilla on mahdollista. Hitsauksen lopputulos riippuu hitsausasennosta ja paras tulos saavutetaan, kun kappaletta pyöritetään hitsauksen aikana siten, että hitsaus tapahtuu koko ajan jalkoasennossa.

Deregulation’s Impact on the Railway Freight Transport Sector’s Future in the Baltic Sea Region

The European transport market has confronted several changes during the last decade. Due to European Union legislative mandates, the railway freight market was deregulated in 2007. The market followed the trend started by other transport modes as well as other previously regulated industries such as banking, telecommunications and energy. Globally, the first country to deregulate the railway freight market was the United States, with the introduction of the Staggers Rail Act in 1980. Some European countries decided to follow suit already before regulation was mandated; among the forerunners were the United Kingdom, Sweden and Germany. The previous research has concentrated only on these countries, which has provided an interesting research gap for this thesis. The Baltic Sea Region consists of countries with different kinds of liberalization paths, including Sweden and Germany, which have been on the frontline, whereas Lithuania and Finland have only one active railway undertaking, the incumbent. The transport market of the European Union is facing further challenges in the near future, due to the Sulphur Directive, oil dependency and the changing structure of European rail networks. In order to improve the accessibility of this peripheral area, further action is required. This research focuses on topics such as the progression of deregulation, barriers to entry, country-specific features, cooperation and internationalization. Based on the research results, it can be stated that the Baltic Sea Region’s railway freight market is expected to change in the future. Further private railway undertakings are anticipated, and these would change the market structure. The realization of European Union’s plans to increase the improved rail network to cover the Baltic States is strongly hoped for, and railway freight market counterparts inside and among countries are starting to enhance their level of cooperation. The Baltic Sea Region countries have several special national characteristics which influence the market and should be taken into account when companies evaluate possible market entry actions. According to thesis interviews, the Swedish market has a strong level of cooperation in the form of an old-boy network, and is supported by a positive attitude of the incumbent towards the private railway undertakings. This has facilitated the entry process of newcomers, and currently the market has numerous operating railway undertakings. A contrary example was found from Poland, where the incumbent sent old rolling stock to the scrap yard rather than sell it to private railway undertakings. The importance of personal relations is highlighted in Russia, followed by the railway market’s strong political bond with politics. Nonetheless, some barriers to entry are shared by the Baltic Sea Region, the main ones being acquisition of rolling stock, bureaucracy and needed investments. The railway freight market is internationalizing, which is perceived via several alliances as well as the increased number of mergers and acquisitions. After deregulation, markets seem to increase the number of railway undertakings at a rather fast pace, but with the passage of time, the larger operators tend to acquire smaller ones. Therefore, it is expected that in a decade’s time, the number of railway undertakings will start to decrease in the deregulation pioneer countries, while the ones coming from behind might still experience an increase. The Russian market is expected to be totally liberalized, and further alliances between the Russian Railways and European railway undertakings are expected to occur. The Baltic Sea Region’s railway freight market is anticipated to improve, and, based on the interviewees’ comments, attract more cargoes from road to rail.

Turvallisuusjohtamisen vaatimukset rautatieympäristössä toimiville yrityksille

Diplomityön tavoitteena on selvittää rautatiealalla toimivien yritysten turvallisuuden hallinnan nykytilaa ja löytää keinoja sen parantamiseen. Tutkimuksen kannalta olennaisia teemoja ovat turvallisuuskulttuuri, turvallisuusjohtaminen ja turvallisuusvaatimukset. Työ tarkastelee rautatiealalla toimivia Liikenneviraston palveluntuottajayrityksiä ja heidän näkemyksiään turvallisuuden hallinnan nykytilanteesta edellä mainittujen teemojen ja työn teoriatutkimuksen avulla. Työn teoriaosuus esittelee laajasti rautatiealalla vallitsevia sääntöjä, määräyksiä, ohjeita ja standardeja. Näiden vaatimusten lisäksi teoriaosuus esittelee rautatiealan turvallisuusjohtamisjärjestelmää (TJJ), joka jaetaan turvallisuuden hallinnan osa-alueiksi. Näitä osa-alueita käytetään apuna tunnistettaessa rautatiealalla toimivien yritysten kannalta tärkeimmät turvallisuuden hallinnan osa-alueet. Työn empiirisessä osuudessa toteutetaan haastattelututkimus rautatiealalla toimiville yrityksille. Haastattelujen perusteella tunnistetaan turvallisuuden hallinnan kannalta tärkeitä kehittämiskohteita ja toimivia käytäntöjä turvallisuuteen liittyen. Näiden avulla luodaan kuva turvallisuuden nykytilasta, joka esitetään työn turvallisuusteemojen avulla. Työn tuloksena esitetään malli viidestä, rautatiealalla toimivien yritysten näkökulmasta keskeisestä, turvallisuuden hallinnan osa-alueesta. Mallia soveltamalla rautatiealalla toimivat yritykset pystyvät vastaamaan paremmin turvallisuusvaatimuksiin, kehittämään turvallisuustoimintojaan ja lisäämään koko yrityksen tietoisuutta turvallisuudesta rautatieympäristössä.