Architecture and Construction Management at Queens University Belfast:Regional Cultural Centre

The Regional Cultural Centre in Letterkenny is a new 2000sqm arts center containing theatre, galleries, workshops and ancillary offices. The site is set back from the street, on high ground with good views. The form and envelope of the building was derived from geometrically connecting the site with the town’s two other main public buildings, the Cathedral (1901) and new Civic Offices (2002, also designed by MacGabhann Architects). This geometrical connection or vectors informed the geometry and shape of the building. This urban matrix of geometrically connecting three corner stones of society, namely the ecclesiastical headquarters, the administrative head quarters and the art centre helps to improve the town planning and urban design of the disparate and chaotic development that Letterkenny has become.
The large cantilever, which houses a 300sqm gallery, is aligned towards the Civic Offices, marks the entrance, and signifies a change of direction of the pedestrian route past the building, like a modern day obelisk.
The circulation routes and stairs internally provide views towards the civic offices and cathedral, thus reinforcing the connection between the three buildings and helps visitors make some sense of Letterkenny as an urban center. The main stairs and vertical circulation are contained behind the large glazed foyer, which is framed to be viewed externally like a proscenium stage, with visitors to the building passively acting their routes through the building.

High performance VLSI architecture for division and square root

A novel high performance bit parallel architecture to perform square root and division is proposed. Relevant VLSI design issues have been addressed. By employing redundant arithmetic and a semisystolic schedule, the throughput has been made independent of the size of the array.

A versatile content addressable memory architecture

In this paper, a novel configurable content addressable memory (CCAM) cell is proposed, to increase the flexibility of embedded CAMs for SoC employment. It can be easily configured as a Binary CAM (BiCAM) or Ternary CAM (TCAM) without significant penalty of power consumption or searching speed. A 64x128 CCAM array has been built and verified through simulation. ©2007 IEEE.

A VLSI architecture for multiplication, division and square root

A high-performance VLSI architecture to perform combined multiply-accumulate, divide, and square root operations is proposed. The circuit is highly regular, requires only minimal control, and can be reconfigured for every cycle. The execution time for each operation is the same. The combination of redundancy and pipelining results in a throughput independent of the wordsize of the array. With current CMOS technology, throughput rates in excess of 80 million operations per second are achievable.

High performance VLSI architecture for Wave Digital Filtering

The application of fine grain pipelining techniques in the design of high performance Wave Digital Filters (WDFs) is described. It is shown that significant increases in the sampling rate of bit parallel circuits can be achieved using most significant bit (msb) first arithmetic. A novel VLSI architecture for implementing two-port adaptor circuits is described which embodies these ideas. The circuit in question is highly regular, uses msb first arithmetic and is implemented using simple carry-save adders. © 1992 Kluwer Academic Publishers.

Bit-level systolic architecture for very high performance IIR filters

A novel bit-level systolic array architecture for implementing bit-parallel IIR filter sections is presented. The authors have shown previously how the fundamental obstacle of pipeline latency in recursive structures can be overcome by the use of redundant arithmetic in combination with bit-level feedback. These ideas are extended by optimizing the degree of redundancy used in different parts of the circuit and combining redundant circuit techniques with those of conventional arithmetic. The resultant architecture offers significant improvements in hardware complexity and throughput rate.

A bit-level systolic architecture for implementing a VQ tree search

A bit-level systolic array system for performing a binary tree Vector Quantization codebook search is described. This consists of a linear chain of regular VLSI building blocks and exhibits data rates suitable for a wide range of real-time applications. A technique is described which reduces the computation required at each node in the binary tree to that of a single inner product operation. This method applies to all the common distortion measures (including the Euclidean distance, the Weighted Euclidean distance and the Itakura-Saito distortion measure) and significantly reduces the hardware required to implement the tree search system. © 1990 Kluwer Academic Publishers.

Reconfigurable full-search video motion estimation architecture

In this paper, a new reconfigurable multi-standard architecture is introduced for integer-pixel motion estimation and a standard-cell based chip design study is presented. This has been designed to cover most of the common block-based video compression standards, including MPEG-2, MPEG-4, H.263, H.264, AVS and WMV-9. The architecture exhibits simpler control, high throughput and relative low hardware cost and highly competitive when compared with excising designs for specific video standards. It can also, through the use of control signals, be dynamically reconfigured at run-time to accommodate different system constraint such as the trade-off in power dissipation and video-quality. The computational rates achieved make the circuit suitable for high end video processing applications. Silicon design studies indicate that circuits based on this approach incur only a relatively small penalty in terms of power dissipation and silicon area when compared with implementations for specific standards.

New FFT architecture and chip design for motion compensation based on phase correlation

Details of a new low power FFT processor for use in digital television applications are presented. This has been fabricated using a 0.6 µm CMOS technology and can perform a 64 point complex forward or inverse FFT on real-rime video at up to 18 Megasamples per second. It comprises 0.5 million transistors in a die area of 7.8×8 mm and dissipates 1 W. Its performance, in terms of computational rate per area per watt, is significantly higher than previously reported devices, leading to a cost-effective silicon solution for high quality video processing applications. This is the result of using a novel VLSI architecture which has been derived from a first principles factorisation of the DFT matrix and tailored to a direct silicon implementation.

Promoting a Sense of Place: An International Study of Architecture Centres

This paper details an international research project which examined over 50 architecture centres in 23 countries including four case study subjects:
•Kent Architecture Centre, England
•Chicago Architecture Foundation
•Museum of Finnish Architecture
•Netherlands Architecture Institute
The paper analyzes the project's main findings including issues of definition, reasons for foundation, cultural policy impact and the main goals of architecture centres. It summarizes recommendations for centres as they attempt to reach their aims.

W-Band Planar Wide-Angle Scanning Antenna Architecture

This paper proposes a hybrid scanning antenna architecture for applications in mm-wave intelligent mobile sensing and communications. We experimentally demonstrate suitable W-band leaky-wave antenna prototypes in substrate integrated waveguide (SIW) technology. Three SIW antennas have been designed that within a 6.5 % fractional bandwidth provide beam scanning over three adjacent angular sectors. Prototypes have been fabricated and their performance has been experimentally evaluated. The measured radiation patterns have shown three frequency scanning beams covering angles from 11 to 56 degrees with beamwidth of 10?±?3 degrees within the 88-94 GHz frequency range.

Critical Dialogue in Architecture Studio: Peer Interaction and Feedback

Most tutors in architecture education regard studio-based learning to be rich in feedback due to is dialogic nature. Yet, student perceptions communicated via audits such as the UK National Student Survey appear to contradict this assumption and challenge the efficacy of design studio as a truly discursive learning setting. This paper presents findings from a collaborative study that was undertaken by the Robert Gordon University, Aberdeen, and Queen’s University Belfast that develop a deeper understanding of the role that peer interaction and dialogue plays within feedback processes, and the value that students attribute to these within the overall learning experience.

The paper adopts a broad definition of feedback, with emphasis on formative processes, and including the various kinds of dialogue that typify studio-based learning, and which constitute forms of guidance, direction, and reflection. The study adopted an ethnographic approach, gathering data on student and staff perceptions over the course of an academic year, and utilising methods embracing both quantitative and qualitative data.

The study found that the informal, socially-based peer interaction that characterises the studio is complementary to, and quite distinct from, the learning derived through tutor interaction. The findings also articulate the respective properties of informal and formally derived feedback and the contribution each makes to the quality of studio-based learning. It also identifies limitations in the use or value of peer learning, understanding of which is valuable to enhancing studio learning in architecture.

Understanding Student and Staff Perceptions of Feedback in Architecture: Summary Report

This report presents the results of a collaborative project between Queens University, Belfast and the Robert Gordon University, Aberdeen, and builds on a dialogue initiated during Session 2009-10 through which course guidance and feedback received by students was identified as an area requiring deeper understanding in order to enhance current practice

Defending the Irish Border: The Map of Watchful Architecture

This chapter offers an analysis of a map of the Irish border. The Map of Watchful Architecture charts the history of defensive structures in the border region.