Metabolomic assays of amoxicillin, cephapirin and ceftiofur in chicken muscle. Application to treated chicken samples by liquid chromatography quadrupole time-of-flight mass spectrometry

The aim of this study was to identity metabolites and transformation products (TPs) in chicken muscle from amoxicillin (AMX), cephapirin (PIR) and ceftiofur (TIO), which are antibiotics of the β-lactam family. Liquid chromatography coupled to quadrupole time-of-flight (QqTOF) mass spectrometry was utilized due to its high resolution, high mass accuracy and MS/MS capacity for elemental composition determination and structural elucidation. Amoxicilloic acid (AMA) and amoxicillin diketopiperazine (DKP) were found as transformation products from AMX. Desacetylcephapirin (DAC) was detected as a metabolite of PIR. Desfuroylceftiofur (DFC) and its conjugated compound with cysteine (DFC-S-Cys) were detected as a result of TIO in contact with chicken muscle tissue. The metabolites and transformation products were also monitored during the in vivo AMX treatment and slaughtering period. It was found that two days were enough to eliminate AMX and associated metabolites/transformation products after the end of administration.

Development of Managerial Reporting for a Pulp and Paper Technology Supplier

Työn tavoitteena oli yritysjohdon käyttämän sisäisen raportin kehittäminen vastaamaan paremmin johdon tarpeita. Teoriaosuuden tarkoituksena oli selvittää kirjallisuuden avulla sisäisen raportin käyttöä johdon työkaluna, hyvän raportin vaatimuksia ja yleisiä raportoinnin periaatteita. Empiirinen osuus toteutettiin haastatteluiden avulla ja analysoimalla case-yrityksen sisäisiä raportteja. Empiirisen osan tavoitteena oli selvittää aiemman raportin ongelmat, löytää ratkaisut näihin ongelmiin ja laatia uusi raportointimalli, joka palvelee paremmin raportin käyttäjiä.Teoriaosuuden perusteella voidaan päätellä, että raportoinnin kehittämiseen vaikuttaa eniten raportin käyttötarkoitus ja henkilöt, joiden työväline raportti tulee olemaan. Raportin kehittäminen on jatkuva prosessi, sillä raportin tulee mukautua liiketoiminta- ja organisaatiomuutoksiin.Työn empiirisessä osassa esitetty uusi raportointimalli palvelee case-yritystä monella eri tasolla. Se tukee johdon työskentelyä ja tarjoaa yritystasolla välineen kustannusten parempaan hallintaan ja seurantaan.

An Evaluation of the Paper Profile - a comparative assessment of the applicability of an emerging environmental communication tool in pulp and paper industry

Diplomityön tavoitteena oli arvioida uutta sellu-, paperi- ja kartonkiteollisuuden Paper Profile -ympäristötuoteselostetta. Paper Profilen tarkoituksena on tarjota paperiteollisuuden asiakkaille ja muille kiinnostuneilla sidosryhmille yhtenäistä ympäristöinformaatiota koskien paperituotteiden koostumusta ja tuotteiden tärkeimpiä ympäristöparametrejä. Työn tärkein tavoite oli arvioida kriittisesti Paper Profilea ja verrata konseptia ISO:n, Kansainvälisen stardardisoimisliiton tuoteselosteeseen sekä löytää konseptien yhtäläisyydet ja erot. Tärkein tehtävä oli tunnistaa ne avaintekijät, joiden avulla Paper Profile -tuoteselostetta voitaisiin pitää yhtenevänä ISO/TR 14025 teknisen raportin kanssa. Lisäksi Paper Profile -tuoteselosteen mahdolliset kehittämistarpeet arvioitiin ISO-tuoteselosteen näkökulmasta. Työn toinen tavoite oli kerätä ja analysoida uuteen tuoteselosteeseen liittyvä asiakaspalaute ja verrata sitä Stora Enson tehtaiden ympäristöpäälliköiden antamiin Paper Profilea koskeviin kommentteihin. Työn tuloksena huomattiin, että Paper Profile -konsepti sellaisenaan ei ole kovin informatiivinen vaan tuoteseloste jättää monia ympäristökysymyksiä avoimeksi. Siitä huolimatta Paper Profile tarjoaa riittävän taustan eri paperituotteiden ympäristökuormitusten keskinäiselle vertailuille. Konseptin viestinnällinen näkökulma paranisi huomattavasti, jos tuoteselosteeseen lisättäisiin kolmannen osapuolen verifiointi. Lisäksi referenssiarvot kertoisivat asiakkaille paremmin esitettyjen parametrien taustoista. Stora Enson tehtaiden ympäristöpäälliköiden, samoin kuin asiakkaidenkin mielestä Paper Profile on yleisesti ottaen potentiaalinen ympäristöviestinnän työkalu, mutta silti konseptiin ehdotettiin joitakin pieniä muutoksia. Avoinna olevat metsäsertifiointikysymykset ja niiden puutteellinen tiedottaminen tuoteselosteessa puhututtivat sekä tehtaiden henkilöstöä että yritysasiakkaita.

Nanocharacterization of Soft Biological Samples in Shear Mode with Quartz Tuning Fork Probes

Quartz tuning forks are extremely good resonators and their use is growing in scanning probe microscopy. Nevertheless, only a few studies on soft biological samples have been reported using these probes. In this work, we present the methodology to develop and use these nanosensors to properly work with biological samples. The working principles, fabrication and experimental setup are presented. The results in the nanocharacterization of different samples in different ambients are presented by using different working modes: amplitude modulation with and without the use of a Phase-Locked Loop (PLL) and frequency modulation. Pseudomonas aeruginosa bacteria are imaged in nitrogen using amplitude modulation. Microcontact printed antibodies are imaged in buffer using amplitude modulation with a PLL. Finally, metastatic cells are imaged in air using frequency modulation.

Integration of Economics into Life Cycle Assessment in the Finnish Pulp and Paper Industry

Taloudellisen laskennan yhdistäminen elinkaariarviointiin (LCA) on alkanut kiinnostaa eri teollisuuden aloja maailmanlaajuisesti viime aikoina. Useat LCA-tietokoneohjelmat sisältävät kustannuslaskentaominaisuuksia ja yksittäiset projektit ovat yhdistäneet ympäristö- ja talouslaskentamenetelmiä. Tässä projektissa tutkitaan näiden yhdistelmien soveltuvuutta suomalaiselle sellu- ja paperiteollisuudelle, sekä kustannuslaskentaominaisuuden lisäämistä KCL:n LCA-ohjelmaan, KCL-ECO 3.0:aan. Kaikki tutkimuksen aikana löytyneet menetelmät, jotka yhdistävät LCA:n ja taloudellista laskentaa, on esitelty tässä työssä. Monet näistä käyttävät elinkaarikustannusarviointia (LCCA). Periaatteessa elinkaari määritellään eri tavalla LCCA:ssa ja LCA:ssa, mikä luo haasteita näiden menetelmien yhdistämiselle. Sopiva elinkaari tulee määritellä laskennan tavoitteiden mukaisesti. Työssä esitellään suositusmenetelmä, joka lähtee suomalaisen sellu- ja paperiteollisuuden erikoispiirteistä. Perusvaatimuksena on yhteensopivuus tavanomaisesti paperin LCA:ssa käytetyn elinkaaren kanssa. Menetelmän yhdistäminen KCL-ECO 3.0:aan on käsitelty yksityiskohtaisesti.

Quantitative elemental analysis of dry-ashed bark and wood samples of birch, spruce and pine from south-western Finland using PIXE

A total of over 200 different samples of bark and wood of Silver birch, Norway spruce and Scots pine were analysed. Samples were taken from several areas in western Finland, some with known sources of atmospheric heavy metal emission (Harjavalta, Ykspihlaja). Also analytical data for pine needles from some sites are reported. The chemical analyses were performed by thick-target particle-induced X-ray emission (PIXE) spectrometry after preconcentration by dry ashing of samples at 550oC. The following elements were quantified in most of the samples: P, S, K, Ca, Mn, Fe, Ni, Cu, Zn, Rb, Sr, Cd, Ba and Pb. The ash percentage and the chemical composition of ashes of different wood materials were also obtained, as dry ashing was used in the analytical procedure. The variations in elemental concentrations in wood and bark of an individual tree, expressed as RSDs, were mostly in the range 10 – 20 %. For several trees of the same species sampled from small areas (< 1 ha), the variations in elemental concentrations were surprisingly high (RSDs 20 – 50 %). In the vicinity of metal plants, effects of strong atmospheric heavy metal pollution (pollution factor above 100) were observed in pine bark. The increase of heavy metal content in wood samples from the same sites was quite small. Elemental concentrations in ashes of bark and wood, from areas with no local source of atmospheric pollution, were relatively uniform. Based on this observation an alternative way of demonstrating atmospheric pollution of tree bark is discussed.

Topological phases in small quantum Hall samples

Topological order has proven a useful concept to describe quantum phase transitions which are not captured by the Ginzburg-Landau type of symmetry-breaking order. However, lacking a local order parameter, topological order is hard to detect. One way to detect it is via direct observation of anyonic properties of excitations which are usually discussed in the thermodynamic limit, but so far has not been realized in macroscopic quantum Hall samples. Here we consider a system of few interacting bosons subjected to the lowest Landau level by a gauge potential, and theoretically investigate vortex excitations in order to identify topological properties of different ground states. Our investigation demonstrates that even in surprisingly small systems anyonic properties are able to characterize the topological order. In addition, focusing on a system in the Laughlin state, we study the robustness of its anyonic behavior in the presence of tunable finite-range interactions acting as a perturbation. A clear signal of a transition to a different state is reflected by the system's anyonic properties.

A Feedfordward Adaptive Controller to Reduce the Imaging Time of Large-Sized Biological Samples with a SPM-Based Multiprobe Station

The time required to image large samples is an important limiting factor in SPM-based systems. In multiprobe setups, especially when working with biological samples, this drawback can make impossible to conduct certain experiments. In this work, we present a feedfordward controller based on bang-bang and adaptive controls. The controls are based in the difference between the maximum speeds that can be used for imaging depending on the flatness of the sample zone. Topographic images of Escherichia coli bacteria samples were acquired using the implemented controllers. Results show that to go faster in the flat zones, rather than using a constant scanning speed for the whole image, speeds up the imaging process of large samples by up to a 4x factor.

The long run impact of mergers and acquisitions on performance – empirical study in the pulp and paper industry

Mergers and acquisitions (M&A) have played very important role in restructuring the pulp and paper industry (PPI). The poor performance and fragmented nature of the industry, overcapacity problems, and globalisation have driven companies to consolidate. The objective of this thesis was to examine how PPI acquirers’ have performed subsequent M&As and whether the deal characteristics have had any impact on performance. Based on the results it seems that PPI companies have not been able to enhance their performance in the long run after M&As although the per-formance of acquiring firms has remained above the industry median, and deal characteristics or the amount of premiums paid do not seem to have had any effect. The statistical significance of the results was tested with change model and regression analysis. Performance was assessed with accrual, cash flow, and market based indicators. Results are congruent with behavioural theory: managers and investors seem to be overoptimistic in determining the synergies from M&As.

Diversification and its reflections on profitability - strategic change in pulp and paper industry in the years 1996 and 2006

The purpose of the thesis was to analyze diversification in pulp and paper industry (PPI), which is an industry facing enormous strategic challenges as many of the basic parameters of its operational environment are rapidly changing. The objective was to explore, how PPI companies have reacted to these changes by adjusting their strategies in terms of diversification and how the adjustments have affected their profitability. The study was statistical in nature. The results indicate that PPI companies in deed had reduced the degree of unrelated and related diversification , but the positive performance implications of the changes were debatable. In light of the data used in the study lower level of diversification did not lead to better profitability, in fact, the companies with the highest level of diversification had the best profitability. By contrast, reducing the level of unrelated diversification improved the profitability development; whereas reducing the level of related diversification deteriorated the profitability of the company. The results were not statistically significant and they cannot be generalized outside the data of the study.

Deinking flotation of recycled linerboard for food packaging applications

Brown packaging linerboard, made entirely from recovered pulp, was subjected to deinking flotation for evaluating the possible improvements in its chemical, optical and mechanical properties. The increase in the rate of recovered paper utilisation, along with the tendency towards lower basis weights, in the packaging paper production, has created a growing need for the utilisation of secondary fibers of improved quality. To attain better quality fibers, flotation deinking of brown grades is being considered, along with the addition of primary fibers to recovered paper furnish. Numerous conducted studies, in which the flotation technology was used in the treatment of brown grades, support this idea. Most of them show that the quality of fibers is improved after flotation deinking, resulting in higher mechanical properties of the deinked handsheets and in lower amounts of chemical contaminants. As to food and human health safety, packaging paper has to meet specific requirements, to be classified as suitable for its direct contact with foods. Recycled paper and board may contain many potential contaminants, which, especially in the case of direct food contact, may migrate from packaging materials into foodstuffs. In this work, the linerboard sample selected for deinking was made from recycled fibers not submitted previously to chemical deinking flotation. Therefore, the original sample contained many noncellulosic components, as well as the residues of printing inks. The studied linerboardsample was a type of packaging paper used for contact with food products that are usually peeled before use, e.g. fruits and vegetables. The decrease in the amount of chemical contaminants, after conducting deinking flotation, was evaluated, along with the changes in the mechanical and optical properties of the deinked handsheets. Food contact analysis was done on both the original paper samples and the filter pads and handsheets made before and after deinking flotation. Food contact analysis consisted of migration tests of brightening agents, colorants, PCPs, formaldehydes and metals. Microbiological tests were also performed to determine the possible transfer of antimicrobial constituents

Impact of Investment Strategies on Performance in Pulp and Paper Industry

The main objective of this study was to examine, what kind of investment strategies the leading European and North American pulp and paper industry companies (PPI) used in 1991-2003, and how the selected strategies affected their performance. The investment strategies were categorised in three classes including mergers and acquisitions, investments in new capacity and investments in existing capacity. The results showed that mergers and acquisitions represented the largest share of total investments in 1991-2003 followed by investments in existing capacity. PPI companies changed investment strategies over time by increasing the share of mergers and acquisitions, which decreased investments in new capacity especially among North American companies. According to the results, good asset quality and investments in new and existing capacity provided better profitability than often expensive acquisitions. Also the capacity decreases had a positive impact on profitability. Average asset quality and profitability were higher among European companies. The study concluded that in the long term the available value creating investment opportunities should limit capital expenditure levels, not the relation of capital expenditure to depreciation.

Fiber flows in global paper and pulp industry. A panel data approach.

The purpose of this thesis is to study factors that explain the bilateral fiber trade flows. This is done by analyzing bilateral trade flows during 1990-2006. It will be studied also, whether there are differences between fiber types. This thesis uses a gravity model approach to study the trade flows. Gravity model is mostly used to study the aggregate data between trading countries. In this thesis the gravity model is applied to single fibers. This model is then applied to panel data set. Results from the regression show clearly that there are benefits in studying different fibers in separate. The effects differ considerably from each other. Furthermore, this thesis speaks for the existence of Linder’s effect in certain fiber types.

Growth Strategies in Pulp and Paper Industry: An Empirical Investigation on Profitability Effects

This study investigates whether there are differences in profitability of PPI companies based on the growth strategy they have chosen to follow. It is examined whether those companies following organic growth strategy are more profitable than those companies following acquisitive growth strategy. It is also investigated are ones larger than the others, or are ones growing faster than the others. Also, the factors affecting the profitability of acquisitive companies are further examined. The results showed that there actually are differences between the two groups. Organically grown companies were found to be more profitable, smaller and growing slower than acquisitive companies. When it comes to examining only acquisitive companies there could be found factors that better or worsen the profitability of companies. For example targets that the company has bought in developing markets were making them more profitable.

A new approach for the separation of spermatozoa from other cell types in forensically relevant samples.

Due to imbalance in genetic material contribution, gynecological samples collected following a sexual assault are challenging to process in order to resolve the male contributor's DNA profile. We set up a new and fast procedure for the recovery and separation of cells from cotton swabs, or other supports. Using spermatozoa specific CD52 antibody coupled to magnetic beads along with magnetic columns, this procedure was first developed and optimized by flow cytometry. It allows the recovery of two enriched cell fractions: a sperm fraction, mostly enriched with the alleged offender's spermatozoa, and a non-sperm fraction, mostly enriched with cells from the victim. Processing fresh as well as six months old mock samples, made of buccal swabs loaded with sperm dilutions, resulted in full single NGM SElect DNA profiles of the sperm donors, respectively the epithelial cells donors, for the sperm and the non-sperm fractions. Untreated duplicate samples processed in parallel only provided the autosomal DNA profiles of the epithelial cells donors. This new procedure can be rapidly tested and adopted by forensic laboratories worldwide as it uses material already commercially available. Moreover it can be easily automated with existing platform, and could therefore provide a mean to rapidly reduce existing backlogs.