12 resultados para cooperative car following model

em ArchiMeD - Elektronische Publikationen der Universität Mainz - Alemanha


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Ein wichtiger Baustein für den langfristigen Erfolg einer Lebertransplantation ist die Compliance mit der lebenslang einzunehmenden immunsuppressiven Therapie. Im Rahmen der vorliegenden Arbeit wurde erstmals mittels MEMS® die Compliance bei lebertransplantierten Patienten untersucht, deren Transplantation einige Jahre zurücklag. Rekrutiert wurden Patienten, die vor 2, 5, 7 oder 10 Jahren (Gruppe 2 y.p.t., 5 y.p.t., 7 y.p.t., 10 y.p.t.) in der Universitätsmedizin Mainz lebertransplantiert wurden. 39 Patienten nahmen an der prospektiven Anwendungsbeobachtung teil. Die Compliance wurde mittels MEMS® über eine Beobachtungszeit von 6 Monaten erfasst. Bei der MEMS®-Auswertung war zu vermuten, dass 10 Patienten diese nicht wie vorgesehen verwendet hatten. Folglich konnten die mittels MEMS® gemessenen Compliance-Parameter nur für 29 Patienten valide ermittelt werden. Die mittlere Dosing Compliance betrug 81 ± 21 %, wobei die Gruppe 2 y.p.t. mit 86 ± 14 % bessere Werte zu verzeichnen hatte als die Gruppe 5 y.p.t. (75 ± 27 %) und 7 y.p.t. (74 ± 28 %). Die Ergebnisse waren jedoch nicht signifikant unterschiedlich (p=0,335, Kruskal-Wallis-Test). Unter Einbeziehung aller mittels MEMS® gemessenen Compliance-Parameter wurden 19 von 29 Patienten (66 %) als compliant eingestuft. Bei der Analyse der Gesamtcompliance basierend auf den subjektiven Compliance-Messmethoden (Morisky-Fragebogen, MESI-Fragebogen, Selbsteinschätzung), der Arzneimittel-Blutspiegel und der Anzahl an Abstoßungsreaktionen, in der alle 39 Patienten einbezogen werden konnten, wurden 35 Patienten (90 %) als compliant eingestuft. rnIm zweiten Teil der Arbeit wurde die Etablierung und Bewertung eines intersektoralen Pharmazeutischen Betreuungskonzepts für lebertransplantierte Patienten untersucht. Erstmals wurden anhand eines entwickelten schnittstellenübergreifenden, integrierten Betreuungskonzepts niedergelassene Apotheker in die Pharmazeutische Betreuung lebertransplantierter Patienten eingebunden. 20 Patienten wurden rekrutiert und während ihres stationären Aufenthaltes nach Transplantation pharmazeutisch betreut. Die Betreuung umfasste eine intensive Patientenschulung mit drei bis vier Gesprächen durch einen Krankenhausapotheker. Während des stationären Aufenthaltes wurden arzneimittelbezogene Probleme erkannt, gelöst und dokumentiert. Bei Entlassung stellte der Krankenhausapotheker einen Medikationsplan für den Hausarzt sowie für den niedergelassenen Apotheker aus und führte mit den Patienten ein ausführliches Entlassungsgespräch. Darüber hinaus wurden den Patienten Arzneimitteleinnahmepläne und eine Patienteninformation über ihr immunsuppressives Arzneimittel übergeben. 15 Patienten konnten daraufhin ambulant von niedergelassenen Apothekern pharmazeutisch weiterbetreut werden. Das kooperierende pharmazeutische Personal wurde durch ein eigens für die Studie erstelltes Manual zur Pharmazeutischen Betreuung lebertransplantierter Patienten geschult und unterstützt. Die niedergelassenen Apotheker sollten die Patienten in ihrer Arzneimitteltherapie begleiten, indem Beratungsgespräche geführt und arzneimittelbezogene Probleme erkannt und gelöst wurden. Die Nutzeffekte der intensiven Pharmazeutischen Betreuung konnte anhand verschiedener Erhebungsinstrumente dargelegt werden. Im Ergebnis resultierte eine hohe Zufriedenheit der Patienten und Apotheker mit dem Betreuungskonzept, die mittels Selbstbeurteilungsfragebögen ermittelt wurde. Die Compliance der Patienten wurde anhand des Morisky- und MESI-Fragebogens, der Selbsteinschätzung der Patienten, Blutspiegelbestimmungen sowie der Einschätzung durch den niedergelassenen Apotheker bestimmt. 86 % der Patienten wurden als compliant eingeordnet. Die Kenntnisse der Patienten über ihre immunsuppressive Therapie, welche anhand von Interviews erfragt wurden, lagen auf einem sehr hohen Niveau. Abschließend kann festgestellt werden, dass die Pharmazeutische Betreuung lebertransplantierter Patienten in den niedergelassenen Apotheken durchführbar ist. Anhand der Dokumentationsprotokolle lässt sich allerdings nur sehr schwer beurteilen, in welchem Maße die Betreuung tatsächlich erfolgte. Das tatsächliche vorliegen einer mangelnden Betreuung oder aber eine lückenhafte Dokumentation der Betreuungsleistung war nicht zu differenzieren. Ein limitierender Faktor für die intensivierte Betreuung ist sicherlich der erhebliche Aufwand für nur einen Patienten mit einem seltenen Krankheitsbild. Das Erkennen und Lösen von 48 ABP durch den Krankenhausapotheker und 32 ABP durch die niedergelassenen Apotheker, d. h. insgesamt 4,5 ABP pro Patient zeigt, dass die Pharmazeutische Betreuung einen wichtigen Beitrag für eine qualitätsgesicherte Arzneimitteltherapie leistet. Die intersektorale Pharmazeutische Betreuung stellt eine wesentliche Hilfe und Unterstützung der Patienten im sicheren Umgang mit ihrer Arzneimitteltherapie dar.rn

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In this thesis, the influence of composition changes on the glass transition behavior of binary liquids in two and three spatial dimensions (2D/3D) is studied in the framework of mode-coupling theory (MCT).The well-established MCT equations are generalized to isotropic and homogeneous multicomponent liquids in arbitrary spatial dimensions. Furthermore, a new method is introduced which allows a fast and precise determination of special properties of glass transition lines. The new equations are then applied to the following model systems: binary mixtures of hard disks/spheres in 2D/3D, binary mixtures of dipolar point particles in 2D, and binary mixtures of dipolar hard disks in 2D. Some general features of the glass transition lines are also discussed. The direct comparison of the binary hard disk/sphere models in 2D/3D shows similar qualitative behavior. Particularly, for binary mixtures of hard disks in 2D the same four so-called mixing effects are identified as have been found before by Götze and Voigtmann for binary hard spheres in 3D [Phys. Rev. E 67, 021502 (2003)]. For instance, depending on the size disparity, adding a second component to a one-component liquid may lead to a stabilization of either the liquid or the glassy state. The MCT results for the 2D system are on a qualitative level in agreement with available computer simulation data. Furthermore, the glass transition diagram found for binary hard disks in 2D strongly resembles the corresponding random close packing diagram. Concerning dipolar systems, it is demonstrated that the experimental system of König et al. [Eur. Phys. J. E 18, 287 (2005)] is well described by binary point dipoles in 2D through a comparison between the experimental partial structure factors and those from computer simulations. For such mixtures of point particles it is demonstrated that MCT predicts always a plasticization effect, i.e. a stabilization of the liquid state due to mixing, in contrast to binary hard disks in 2D or binary hard spheres in 3D. It is demonstrated that the predicted plasticization effect is in qualitative agreement with experimental results. Finally, a glass transition diagram for binary mixtures of dipolar hard disks in 2D is calculated. These results demonstrate that at higher packing fractions there is a competition between the mixing effects occurring for binary hard disks in 2D and those for binary point dipoles in 2D.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Zusammenfassung Um zu einem besseren Verständnis des Prozesses der Biomineralisation zu gelangen, muss das Zusammenwirken der verschiedenen Typen biologischer Makromoleküle, die am Keimbildungs- und Wachstumsprozess der Minerale beteiligt sind, berücksichtigt werden. In dieser Arbeit wird ein neues Modellsystem eingeführt, das aus einem SAM (self-assembled monolayer) mit verschiedenen Funktionalitäten und unterschiedlichen, gelösten Makromolekülen besteht. Es konnte gezeigt werden, dass die Kristallisation von Vaterit (CaCO3) sowie Strontianit (SrCO3) Nanodrähten der Präsenz von Polyacrylat in Kooperation mit einer COOH-funktionalisierten SAM-Oberfläche zugeschrieben werden kann. Die Kombination bestehend aus einer polaren SAM-Oberfläche und Polyacrylat fungiert als Grenzfläche für die Struktur dirigierende Kristallisation von Nanodraht-Kristallen. Weiter konnte gezeigt werden, dass die Phasenselektion von CaCO3 durch die kooperative Wechselwirkung zwischen einer SAM-Oberfläche und einem daran adsorbierten hb-Polyglycerol kontrolliert wird. Auch die Funktionalität einer SAM-Oberfläche in Gegenwart von Carboxymethyl-cellulose übt einen entscheidenden Einfluss auf die Phasenselektion des entstehenden Produktes aus. In der vorliegenden Arbeit wurden Untersuchungen an CaCO3 zur homogenen Keimbildung, zur Nukleation in Gegenwart eines Proteins sowie auf Kolloiden, die als Template fungieren, mittels Kleinwinkel-Neutronenstreuung durchgeführt. Die homogene Kristallisation in wässriger Lösung stellte sich als ein mehrstufiger Prozess heraus. In Gegenwart des Eiweißproteins Ovalbumin konnten drei Phasen identifiziert werden, darunter eine anfänglich vorhandene amorphe sowie zwei kristalline Phasen.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The cooperative motion algorithm was applied on the molecular simulation of complex chemical reactions and macromolecular orientation phenomena in confined geometries. First, we investigated the case of equilibrium step-growth polymerization in lamellae, pores and droplets. In such systems, confinement was quantified as the area/volume ratio. Results showed that, as confinement increases, polymerization becomes slower and the average molecular weight (MW) at equilibrium decreases. This is caused by the sterical hindrance imposed by the walls since chain growth reactions in their close vicinity have less realization possibilities. For reactions inside droplets at surfaces, contact angles usually increased after polymerization to compensate conformation restrictions imposed by confinement upon growing chains. In a second investigation, we considered monodisperse and chemically inert chains and focused on the effect of confinement on chain orientation. Simulations of thin polymer films showed that chains are preferably oriented parallel to the surface. Orientation increases as MW increases or as film thickness d decreases, in qualitative agreement with experiments with low MW polystyrene. It is demonstrated that the orientation of simulated chains results from a size effect, being a function of the ratio between chain end-to-end distance and d. This study was complemented by experiments with thin films of pi-conjugated polymers like MEH-PPV. Anisotropic refractive index measurements were used to analyze chain orientation. With increasing MW, orientation is enhanced. However, for MEH-PPV, orientation does not depend on d even at thicknesses much larger than the chain contour length. This contradiction with simulations was discussed by considering additional causes for orientation, for instance the appearance of nematic-like ordering in polymer films. In another investigation, we simulated droplet evaporation at soluble surfaces and reproduced the formation of wells surrounded by ringlike deposits at the surface, as observed experimentally. In our simulations, swollen substrate particles migrate to the border of the droplet to minimize the contact between solvent and vacuum, which costs the most energy. Deposit formation in the beginning of evaporation results in pinning of the droplet. When polymer chains at the substrate surface have strong uniaxial orientation, the resulting pattern is no longer similar to a ring but to a pair of half-moons. In a final stage, as an extension for the model developed for polymerization in nanoreactors, we studied the effect of geometrical confinement on a hypothetical oscillating reaction following the mechanism of the so called periodically forced Brusselator. It was shown that a reaction which is chaotic in the bulk may be driven to periodicity by confinement and vice-versa, opening new perspectives for chaos control.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Summary PhD Thesis Jan Pollmann: This thesis focuses on global scale measurements of light reactive non-methane hydrocarbon (NMHC), in the volatility range from ethane to toluene with a special focus on ethane, propane, isobutane, butane, isopentane and pentane. Even though they only occur at the ppt level (nmol mol-1) in the remote troposphere these species can yield insight into key atmospheric processes. An analytical method was developed and subsequently evaluated to analyze NMHC from the NOAA – ERSL cooperative air sampling network. Potential analytical interferences through other atmospheric trace gases (water vapor and ozone) were carefully examined. The analytical parameters accuracy and precision were analyzed in detail. It was proven that more than 90% of the data points meet the Global Atmospheric Watch (GAW) data quality objective. Trace gas measurements from 28 measurement stations were used to derive the global atmospheric distribution profile for 4 NMHC (ethane, propane, isobutane, butane). A close comparison of the derived ethane data with previously published reports showed that northern hemispheric ethane background mixing ratio declined by approximately 30% since 1990. No such change was observed for southern hemispheric ethane. The NMHC data and trace gas data supplied by NOAA ESRL were used to estimate local diurnal averaged hydroxyl radical (OH) mixing ratios by variability analysis. Comparison of the variability derived OH with directly measured OH and modeled OH mixing ratios were found in good agreement outside the tropics. Tropical OH was on average two times higher than predicted by the model. Variability analysis was used to assess the effect of chlorine radicals on atmospheric oxidation chemistry. It was found that Cl is probably not of significant relevance on a global scale.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

In dieser Arbeit wurde die Rolle des Epstein-Barr Virus induzierten Gens 3 in einem Mausmodel des durch B16-F10 Zellen hervorgerufenen metastasierenden Melanoms untersucht. Das von aktivierten antigenpräsentierenden Zellen exprimierte EBI-3 gehört zur Familie der löslichen Typ 1 Zytokinrezeptoren, weist eine hohe Homologie zur p40 Untereinheit des IL-12 auf und bildet zusammen mit p28 das IL-27. Die intravenöse Injektion der B16-F10 Zelllinie führte zu einer signifikanten Erniedrigung der Tumormetastasen in den EBI-3 defizienten Lungen sowie zu einer höheren Lebenserwartung dieser Mäuse im Vergleich zu den B6 Wildtypen. Darüber hinaus habe ich in den EBI-3 defizienten Mäusen eine verminderte VCAM-1 Expression auf den Endothelzellen der Lunge gefunden während Änderungen in der VEGF Expression nicht detektiert wurden. Der immunologische Hintergrund, der diesen therapeutischen Effekt hervorrief, konnte durch die T-Zellaktivierung durch die kürzlich neu beschriebene DC Population, welche Interferon-produzierende Killer Dendritische Zellen genannt werden (IK-DC), die zusätzlich von aktivierten und maturierten klassischen DCs unterstützt wurden, erklärt werden. IK-DCs von EBI-3 defizienten Mäusen produzierten höhere Mengen an IFN-g während die klassischen DCs MHC und co-stimulatorische Moleküle exprimierten, welche die Sekretion von IL-12 initiierten. Das Zusammenspiel der genannten Faktoren induzierte eine verstärkte CD4 und CD8 T-Zellantwort in den Lungen dieser Mäuse. Dies wiederum resultierte im TNF- und TRAIL abhängigen programmierten Zelltod der B16-F10 Melanomzellen in den Lungen der EBI-3 defizienten Mäuse, wohingegen sowohl weitere anti-apoptotische Mechanismen als auch T regulatorische Zellen keinen Einfluss auf die in den EBI-3 defizienten Mäusen beobachtete Tumorabwehr zu spielen scheint. Schlussendlich konnten EBI-3 defiziente CD8+ T-Zellen, welche zuvor mit Tumorantigen geprimed wurden, adoptiv in B6 Wildtypmäuse transferiert werden, was zeigte, dass diese Zellen in der Lage sind, die Tumormasse in den Empfängermäusen signifikant zu verringern. Zusammengefasst, demonstrieren diese Daten, dass das Blockieren von EBI-3 im metastasierenden Melanom ein vielversprechender Angriffspunkt in der Tumortherapie darstellt.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This work deals with the car sequencing (CS) problem, a combinatorial optimization problem for sequencing mixed-model assembly lines. The aim is to find a production sequence for different variants of a common base product, such that work overload of the respective line operators is avoided or minimized. The variants are distinguished by certain options (e.g., sun roof yes/no) and, therefore, require different processing times at the stations of the line. CS introduces a so-called sequencing rule H:N for each option, which restricts the occurrence of this option to at most H in any N consecutive variants. It seeks for a sequence that leads to no or a minimum number of sequencing rule violations. In this work, CS’ suitability for workload-oriented sequencing is analyzed. Therefore, its solution quality is compared in experiments to the related mixed-model sequencing problem. A new sequencing rule generation approach as well as a new lower bound for the problem are presented. Different exact and heuristic solution methods for CS are developed and their efficiency is shown in experiments. Furthermore, CS is adjusted and applied to a resequencing problem with pull-off tables.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

A field of computational neuroscience develops mathematical models to describe neuronal systems. The aim is to better understand the nervous system. Historically, the integrate-and-fire model, developed by Lapique in 1907, was the first model describing a neuron. In 1952 Hodgkin and Huxley [8] described the so called Hodgkin-Huxley model in the article “A Quantitative Description of Membrane Current and Its Application to Conduction and Excitation in Nerve”. The Hodgkin-Huxley model is one of the most successful and widely-used biological neuron models. Based on experimental data from the squid giant axon, Hodgkin and Huxley developed their mathematical model as a four-dimensional system of first-order ordinary differential equations. One of these equations characterizes the membrane potential as a process in time, whereas the other three equations depict the opening and closing state of sodium and potassium ion channels. The membrane potential is proportional to the sum of ionic current flowing across the membrane and an externally applied current. For various types of external input the membrane potential behaves differently. This thesis considers the following three types of input: (i) Rinzel and Miller [15] calculated an interval of amplitudes for a constant applied current, where the membrane potential is repetitively spiking; (ii) Aihara, Matsumoto and Ikegaya [1] said that dependent on the amplitude and the frequency of a periodic applied current the membrane potential responds periodically; (iii) Izhikevich [12] stated that brief pulses of positive and negative current with different amplitudes and frequencies can lead to a periodic response of the membrane potential. In chapter 1 the Hodgkin-Huxley model is introduced according to Izhikevich [12]. Besides the definition of the model, several biological and physiological notes are made, and further concepts are described by examples. Moreover, the numerical methods to solve the equations of the Hodgkin-Huxley model are presented which were used for the computer simulations in chapter 2 and chapter 3. In chapter 2 the statements for the three different inputs (i), (ii) and (iii) will be verified, and periodic behavior for the inputs (ii) and (iii) will be investigated. In chapter 3 the inputs are embedded in an Ornstein-Uhlenbeck process to see the influence of noise on the results of chapter 2.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

In this thesis we are presenting a broadly based computer simulation study of two-dimensional colloidal crystals under different external conditions. In order to fully understand the phenomena which occur when the system is being compressed or when the walls are being sheared, it proved necessary to study also the basic motion of the particles and the diffusion processes which occur in the case without these external forces. In the first part of this thesis we investigate the structural transition in the number of rows which occurs when the crystal is being compressed by placing the structured walls closer together. Previous attempts to locate this transition were impeded by huge hysteresis effects. We were able to determine the transition point with higher precision by applying both the Schmid-Schilling thermodynamic integration method and the phase switch Monte Carlo method in order to determine the free energies. These simulations showed not only that the phase switch method can successfully be applied to systems with a few thousand particles and a soft crystalline structure with a superimposed pattern of defects, but also that this method is way more efficient than a thermodynamic integration when free energy differences are to be calculated. Additionally, the phase switch method enabled us to distinguish between several energetically very similar structures and to determine which one of them was actually stable. Another aspect considered in the first result chapter of this thesis is the ensemble inequivalence which can be observed when the structural transition is studied in the NpT and in the NVT ensemble. The second part of this work deals with the basic motion occurring in colloidal crystals confined by structured walls. Several cases are compared where the walls are placed in different positions, thereby introducing an incommensurability into the crystalline structure. Also the movement of the solitons, which are created in the course of the structural transition, is investigated. Furthermore, we will present results showing that not only the well-known mechanism of vacancies and interstitial particles leads to diffusion in our model system, but that also cooperative ring rotation phenomena occur. In this part and the following we applied Langevin dynamics simulations. In the last chapter of this work we will present results on the effect of shear on the colloidal crystal. The shear was implemented by moving the walls with constant velocity. We have observed shear banding and, depending on the shear velocity, that the inner part of the crystal breaks into several domains with different orientations. At very high shear velocities holes are created in the structure, which originate close to the walls, but also diffuse into the inner part of the crystal.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This thesis focuses on the design and characterization of a novel, artificial minimal model membrane system with chosen physical parameters to mimic a nanoparticle uptake process driven exclusively by adhesion and softness of the bilayer. The realization is based on polymersomes composed of poly(dimethylsiloxane)-b-poly(2-methyloxazoline) (PMDS-b-PMOXA) and nanoscopic colloidal particles (polystyrene, silica), and the utilization of powerful characterization techniques. rnPDMS-b-PMOXA polymersomes with a radius, Rh ~100 nm, a size polydispersity, PD = 1.1 and a membrane thickness, h = 16 nm, were prepared using the film rehydratation method. Due to the suitable mechanical properties (Young’s modulus of ~17 MPa and a bending modulus of ~7⋅10-8 J) along with the long-term stability and the modifiability, these kind of polymersomes can be used as model membranes to study physical and physicochemical aspects of transmembrane transport of nanoparticles. A combination of photon (PCS) and fluorescence (FCS) correlation spectroscopies optimizes species selectivity, necessary for a unique internalization study encompassing two main efforts. rnFor the proof of concepts, the first effort focused on the interaction of nanoparticles (Rh NP SiO2 = 14 nm, Rh NP PS = 16 nm; cNP = 0.1 gL-1) and polymersomes (Rh P = 112 nm; cP = 0.045 gL-1) with fixed size and concentration. Identification of a modified form factor of the polymersome entities, selectively seen in the PCS experiment, enabled a precise monitor and quantitative description of the incorporation process. Combining PCS and FCS led to the estimation of the incorporated particles per polymersome (about 8 in the examined system) and the development of an appropriate methodology for the kinetics and dynamics of the internalization process. rnThe second effort aimed at the establishment of the necessary phenomenology to facilitate comparison with theories. The size and concentration of the nanoparticles were chosen as the most important system variables (Rh NP = 14 - 57 nm; cNP = 0.05 - 0.2 gL-1). It was revealed that the incorporation process could be controlled to a significant extent by changing the nanoparticles size and concentration. Average number of 7 up to 11 NPs with Rh NP = 14 nm and 3 up to 6 NPs with Rh NP = 25 nm can be internalized into the present polymersomes by changing initial nanoparticles concentration in the range 0.1- 0.2 gL-1. Rapid internalization of the particles by polymersomes is observed only above a critical threshold particles concentration, dependent on the nanoparticle size. rnWith regard possible pathways for the particle uptake, cryogenic transmission electron microscopy (cryo-TEM) has revealed two different incorporation mechanisms depending on the size of the involved nanoparticles: cooperative incorporation of nanoparticles groups or single nanoparticles incorporation. Conditions for nanoparticle uptake and controlled filling of polymersomes were presented. rnIn the framework of this thesis, the experimental observation of transmembrane transport of spherical PS and SiO2 NPs into polymersomes via an internalization process was reported and examined quantitatively for the first time. rnIn a summary the work performed in frames of this thesis might have significant impact on cell model systems’ development and thus improved understanding of transmembrane transport processes. The present experimental findings help create the missing phenomenology necessary for a detailed understanding of a phenomenon with great relevance in transmembrane transport. The fact that transmembrane transport of nanoparticles can be performed by artificial model system without any additional stimuli has a fundamental impact on the understanding, not only of the nanoparticle invagination process but also of the interaction of nanoparticles with biological as well as polymeric membranes. rn

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Die Kontrolle der Infektion mit dem humanen Cytomegalovirus (HCMV) wird primär durch antivirale CD8 T-Zellen vermittelt. Während der Koevolution zwischen Virus und Wirt wurden Immunevasionsmechanismen entwickelt, die direkt die Expression der Peptid-MHC-Klasse-I-Komplexe an der Zelloberfläche beeinflussen und es dem Virus ermöglichen, der Immunkontrolle des Wirtes zu entkommen. Da HCMV und das murine CMV (mCMV) zum Teil analoge Strategien zur Modulation des MHC-Klasse-I-Antigen-Präsentationswegs entwickelt haben, wurde in der vorliegenden Arbeit auf das experimentelle Modell mit mCMV zurückgegriffen. Die für die Immunevasion verantwortlichen Genprodukte m04/gp34, m06/gp48 und m152/gp40 werden aufgrund ihres regulatorischen Einflusses auf die Antigenpräsentation als vRAPs (viral regulators of antigen presentation) bezeichnet. Diese interferieren mit dem Transport Peptid-beladener MHC-Klasse-I-Moleküle und reduzieren in ihrer konzertierten Wirkung die Präsentation viraler Peptide an der Zelloberfläche.rnDie Transplantation hämatopoietischer Zellen nach Immunoablation stellt eine etablierte Therapieform bei malignen hämatologischen Erkrankungen dar. Zwischen Immunoablation und der Rekonstitution des Immunsystems sind die Empfänger der transferierten Zellen stark immunsupprimiert und anfällig für eine CMV-Erkrankung bei Reaktivierung des Virus. Neben der Gabe antiviraler Medikamente ist der adoptive Transfer antiviraler CD8 T-Zellen eine vielversprechende Therapiemöglichkeit, um reaktivierende CMV zu kontrollieren, bis das körpereigene Immunsystem wieder funktionsfähig ist. Obwohl im murinen Modell sehr wohl etabliert, stellen im humanen System die eingeschränkte Wirkung und die Notwendigkeit der konsequenten Gabe hoher Zellzahlen gewisse logistische Schwierigkeiten dar, welche die Methode bisher von der klinischen Routine ausschließen.rnDas murine Modell sagte eine Rolle von IFN-γ voraus, da Depletion dieses Zytokins zu einer verminderten Schutzwirkung gegen die mCMV-Infektion führt.rnIm ersten Teil dieser Arbeit sollte ein möglicher inhibitorischer Effekt von m04 auf m152 untersucht werden, der bei der Rekombinanten Δm06W beobachtet wurde. Mit neu generierten Viren (Δm06L1+2) konnte dieser Effekt allerdings nicht bestätigt werden. Bei Δm06W fehlte jedoch eine höher N-glykosylierte Isoform des m152-Proteins. Um zu untersuchen, ob die N-Glykosylierung von m152 für seine Funktion notwendig ist, wurde ein rekombinantes Virus generiert, das in Folge einer Deletion aller 3 N-Glykosylierungssequenzen nur eine nicht-glykosylierte Isoform des m152-Proteins bilden kann. In Übereinstimmung mit der zwischenzeitlich publizierten Kristallstruktur das Komplexes von m152 und dem Liganden RAE-1 des aktivierenden NK-Zellrezeptors NKG2D konnte erstmals gezeigt werden, dass die Funktionen von m152 in der adaptiven und in der angeborenen Immunität auch von der nicht N-glykosylierten Isoform wahrgenommen werden können.rnIm zweiten Teil der Arbeit sollte mit Hilfe eines Sets an vRAP Deletionsmutanten der Einfluss von IFN γ auf die einzeln oder in Kombination exprimierten vRAPs untersucht werden. Es zeigte sich, dass Vorbehandlung der Zellen mit IFN-γ die Antigenprozessierung nach Infektion stark erhöht und die vRAPs dann nicht mehr in der Lage sind, die Präsentation aller Peptid-beladener MHC-Klasse-I-Komplexe zu verhindern. Des Weiteren konnte gezeigt werden, dass vorher nicht-schützende CD8 T-Zellen Schutz vermitteln können, wenn das Gewebe der Rezipienten konstitutiv mit IFN-γ versorgt wird. Die zusätzliche Gabe von IFN-γ stellt daher eine vielversprechende Möglichkeit dar, den adoptiven Transfer als Therapie in der klinischen Routine einzusetzen.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Das Ziel dieser Arbeit war es, mehr Informationen über unkonventionelle Gründe für Gärstockungen zu gewinnen und neue Wege zu finden, diese zu überwinden. Mikrobielle Sukzession und die chemische Zusammensetzung bei der Gärung wurden in zwei aufeinander folgenden Jahren in einem Weingut von der oberen Mosel in Deutschland studiert. Es gab keinen Hinweis darauf, dass die isolierten Bakterienspezies oder chemischen Komponenten von Most und Jungwein an schleppenden oder stockenden Gärungen beteiligt waren. Ferner konnte während dieser Arbeit gezeigt werden, dass Saccharomyces bayanus die dominierende Weinhefe in diesem Weingut war statt der klassischen und bekannten Weinhefe Saccharomyces cerevisiae. Während der Gärstockung konnte ein Dreifach-Hybrid Saccharomyces cerevisiae x Saccharomyces kudriavzevii x Saccharomyces bayanus wachsen, Saccharomyces bayanus ersetzen und die Gärung beenden. Beide isolierten Hefestämme Saccharomyces bayanus Stamm HL 77 und der Dreifach-Hybrid Saccharomyces cerevisiae x Saccharomyces kudriavzevii x Saccharomyces bayanus Stamm HL 78 konnten Glucose und Fructose von Anfang an verwerten und konnten bei niedrigen Temperaturen von 15 °C und in der Abwesenheit von Hefe-verwertbarem Stickstoff in Form von Ammonium wachsen, solange Aminosäuren im Medium vorhanden waren, im Gegensatz zu einer kommerziellen Saccharomyces cerevisiae-Starterkultur. Chemische Untersuchungen ergaben, dass Hefe-verwertbarer Stickstoff in dem kooperierenden Weingut mit einem Maximum von 160 mg/l zu Beginn der Gärung vorhanden war und auf 40 mg/L verringert war nach zwei Wochen. Aus diesem Grund sind beide isolierten Hefestämme interessant als Starterkulturen in diesem Weingut und dies kann neben der niedrigen Temperatur im Keller auch ein Grund sein, warum Saccharomyces cerevisiae nicht die dominierende Weinhefe in diesem Fall ist. Der Dreifach-Hybrid Saccharomyces cerevisiae x Saccharomyces kudriavzevii x Saccharomyces bayanus Stamm HL 78 ist in der Lage, Fructose noch effizienter zu nutzen als Saccharomyces bayanus Stamm HL 77 und ist weniger abhängig von der Aminosäurekonzentration. Dieser Stamm wurde bereits erfolgreich bei diesem Projekt eingesetzt, um eine Gärstockung in dem kooperierenden Weingut zu beheben. Es ist bekannt, dass Saccharomyces-Hybride in der Weinherstellung vorkommen aber ihre Rolle bei der Überwindung von Gärstockungen wurde bisher noch nicht beschrieben. Diese Ergebnisse sind nützlich, um Gärstockungen zu vermeiden oder zu überwinden mit der selektiven Verwendung dieser Hefestämme in verschiedenen Stadien der Gärung. Das kooperierende Weingut, welches im oberen Qualitätssegment platziert ist, hatte jedes Jahr Probleme mit Gärstockungen. Daher ist die Anwendung der Dreifach-Hybriden Saccharomyces cerevisiae x Saccharomyces kudriavzevii x Saccharomyces bayanus Stamm HL 78 eine große Chance, Gärstockungen und finanzielle Verluste ohne kommerzielle Starterkulturen oder andere übliche Praktiken, die zu einer Veränderung des Aromaprofils führen können, zu vermeiden. Die beschriebenen Untersuchungen stellen ein Modell dar, um Gärstockungen auch in anderen Weingütern, die Spontangärungen anwenden, zu überwinden.