Ympäristöjärjestelmien kehittäminen rakennustuotealan yrityksen Keski-Euroopan toimipaikoissa

Tämän diplomityön tavoitteena oli antaa kehittämisehdotuksia, joilla voidaan parantaa rakennustuotealan yrityksen ympäristöjärjestelmien kustannustehokkuutta sekä ympäristöpolitiikkaan liittyvän jatkuvan parantamisen yhtenäistä toteutumista eri toimipaikoilla. Lähtökohtana olivat havainnot siitä, että melko pienissä toimipaikoissa laatu- ja ympäristöasiat kattavan toimintajärjestelmän rakentaminen ja ylläpitäminen vie paljon resursseja. Lisäksi selvitettiin uuden ISO 14001-standardiehdotuksen mahdollisia vaikutuksia käytössä oleviin ympäristöjärjestelmiin. Tutkimusmenetelminä käytettiin eri sertifiointielimille tehtyä haastattelua, toimipaikkojen ympäristövastaaville lähetettyä kyselyä, verkkosivuille kohdistettua kilpailijaseurantaa sekä selvitystä uuden ISO 14001- standardiehdotuksen muutoksista. Eri toimipaikkojen ympäristöjärjestelmien yhdistäminen saman sertifikaatin alle oli kaikkien sertifiointielinten edustajien mielestä hyvä tapa vähentää järjestelmien ulkoisesta valvonnasta aiheutuvia kustannuksia ja parantaa järjestelmien tehokkuutta. Ulkoisten kustannusten aleneminen on noin yksikolmasosa, joka syntyy ensinnäkin sertifikaattimaksujen alenemista ja toisaalta sertifiointipäivien vähenemisestä. Sertifikaattimaksut alenevat, koska yhdistetyssä järjestelmässä sertifikaatteja on vähemmän, ja sertifiointipäivien määrä vähenee, koska yhdistetyn järjestelmän ulkoisessa valvonnassa käytetään otanta -periaatetta. Kilpailijaseurannan osalta havaittiin, että yrityksen verkkosivuilla kerrottiin kilpailijoita paremmin ympäristö- sekä laatujärjestelmistä. Kehitettävää on eri maiden verkkosivujen yhtenäisyydessä ja ympäristö- ja laatupolitiikan esittämisessä. Nämä politiikat tulee olla esillä, koska järjestelmästandardit edellyttävät politiikkojen julkisuutta. Ympäristövastaaville tehdyn kyselyn perusteella havaittiin, että tällä hetkellä toimipaikoilla käytössä olevissa ympäristäjärjestelmissä on eroavuuksia. Syynä tähän on muun muassa järjestelmien eri-ikäisyys, maiden toimipaikkojen erilainen lainsäädäntö sekä erilaiset resurssit. Kehittämistä on erityisesti ympäristönnäkökohtien tunnistamisessa ja merkittävien ympäristönäkökohtien valinnassa, ympäristöjärjestelmän tavoitteissa ja päämäärissä sekä käytettävissä indikaattoreissa. Näiden osalta tulee lisätä koulutusta ja ohjeistusta. Uuden ISO 14001 -standardin muutoksia tarkasteltaessa havaittiin, ettei se aiheuta suuria muutostarpeita nykyisiin ympäristöjärjestelmiin. Standardin suurimmat muutokset ovat tulleet tekstin rakenteeseen, joka on nyt selkeälukuista ja yhteensopivampaa ISO 9001 laatuhallintastandardin kanssa. Standardi painottaa entistä standardia enemmän tuotteista aiheutuvia ympäristönäkökohtia, mutta on muistettava, että sen vaikutukset nykyisiin ympäristöjärjestelmiin tiedetään vasta, kun sitä aletaan tulkita. Tulosten perusteella päädyttiin siihen, että ympäristöjärjestelmien yhdistäminen saman sertifikaatin alle on tehokkain tapa parantaa kustannustehokkuutta sekä parantaa ympäristöpolitiikkaan liittyvää jatkuvaa parantamista. Ulkoisten kustannusten aleminen ei ole tärkein syy järjestelmien yhdistämiseen, koska yhdistämisen alkuvaiheessa se aiheuttaa sisäisten kustannusten lisääntymistä. Jatkossa yhdistämisestä voidaan odottaa myös sisäisten kustannusten säästöjä, koska yhdistäminen vähentää päällekkäistä työtä. Yrityksen ympäristöpolitiikan mukaiseen jatkuvaan parantamiseen järjestelmien yhdistäminen vaikuttaa positiivisesti usealla tavalla, ja tätä voidaan pitää kustannussäästöjä tärkeämpänä syynä sertifikaattien yhdistämiseen. Se yhtenäistää toimintatapoja ja lisää yhteistyötä, mikä vaikuttaa ympäristöpolitiikan yhtenäiseen toteutumiseen.

Design of flywheel generator for a diesel hybrid working machine

The aim of this work is to design a flywheel generator for a diesel hybrid working machine. In this work we perform detailed design of a generator. Mobile machines are commonly used in industry: road building machines, three harvesting machines, boring machines, trucks and other equipment. These machines work with a hydraulic drive system. This system provides good service property and high technical level. Manufacturers of mobile machines tend to satisfy all requirements of customers and modernized drive system. In this work also a description of the frequency inverter is present. Power electronics system is one of the basic parts for structures perform in the project.

Akateemiset urapolut. Humanistisen, yhteiskuntatieteellisen ja kasvatustieteellisen alan generalistien urapolkujen alkuvaiheet 1980- ja 1990-luvuilla

Academic Career Paths. The early career phases of generalists in the fields of humanities, social science and education in the 1980’s and 1990’s This doctoral thesis analyses how generalist graduates of master’s degree have attached to the labour market in two different time periods, and how their career paths in the first eight years following graduation have shaped up. The thesis also analyses the channels of employment through which the generalists have got employed in their early career path. By generalists I am referring to graduates of studies in academic fields which have not qualified the person in a specific profession but rather offered a more general readiness for working life. I address two groups of generalist master’s degree graduates of The University of Turku; one including graduates of the year 1985 and the other consisting of graduates of 1995. All subjects have graduated in the field of humanities, social studies or education. 71 respondents from the group of 1985 and 80 respondents from the group of 1995 answered a survey, which provided the data for the thesis. I interpret the data through the theoretical approaches of changing working life, model of normal employment, transitional labour markets, linear life path, overlapping life courses, hidden labour market and social capital. The conclusion of the thesis is that societal era is connected with employment and career paths of academic generalists. Between the two groups there were differences especially in attachment to labor market, in forms of employment (permanent full-time job vs. temporary job) and in employment channels. Compared to the situation the 1985 group had been in after their graduation, the 1995 group - after getting their degree - became more often unemployed and/or employed in duties below their level of education. Their mobility was also greater and their contracts were often temporary, whereas the graduates of 1985 had been employed in more permanent positions. I demonstrate that the career paths of generalists can be categorized in five career types: steady state, transitory, linear, unsteady and diverging career. Graduates of 1985 have been treading on more stable paths than the latter group. The channels of employment they used were roughly equally divided between formal (e.g. newspaper advertisement and employment office) and informal (e.g. personal contacts and unprompted search for work) channels, whereas amongst the 1995 group employment happened through more varied channels and mostly through informal channels. Regardless of their year of graduation the generalists’ careers had begun to evolve already while they were still in the university and had started working at the same time. The thesis displays how the model of normal employment has weakened and career paths have become unsteady as a consequence of temporary positions. What is also evident in employment when turning from the 1980’s towards the succeeding decade is the rise of significance of the hidden labour market and social capital.

Menestyksekkäät yliopistopelin pelaajat? Tutkimus nopeasti ja nuorena valmistumisesta

Succestul players of the university game? A study about the short duration of master’s degree studies and graduating at a young age The duration of studies has long been a topic of conversation. It was first mentioned in 1883, but the discussion has been quite active and topical for the last fifty years. During that time, there have been numerous committees, working groups for the Ministry of Education, and revisions to the structure of the master’s degree program. All of these have focused on lowering the duration of studies as well as the age at which students graduate. These two factors have been regarded as indicators of efficiency. Achieving these goals is seen to promote the successful transition from studies to work. In addition, the greater time that people spend working is thought to help with the fiscal burden of an aging population. The reasons for prolonged study seem to be: students working during the course of their studies; the actual workload of the studies, which sometimes does not correlate with the calculated workload; problems with the students’ course selections and with their financial support from the government; issues in teaching; and problems with university funding. This study focuses on students’ study experiences, their progress, and the university itself. Of particular interest was the students’ use of different resources—cultural, social, and economical capital. Participants in the study had graduated from the University of Turku between the years of 1999 and 2001 and were divided into two groups: prompt graduates, those who graduated among the fastest 18th percent in their faculty; and those who graduated at a slower pace. A survey (N=499) and interviews (N=69) were among the methods used, along with a compilation of statistics on the students’ duration of studies, the number of modules studied, and marks obtained. Bourdieu’s theory about fields and the games people play in those fields formed the theoretical background of this study. The university was seen to form a playing field with historically and politically changeable rules. The students playing in this field were considered to possess different economical, social, and cultural resources, which they use more or less successfully. Some of the strategies used by students result in gra¬duating at a young age and/or a short duration of study; some do not. This study divided the age of graduation and the duration of study into separate games. This allowed the study to determine the relationship between these two factors and to examine their similarities and differences. The study also focused on the idea of success. Short duration of studies and a young graduation age can be considered, be some, an indication of success in navigating the university field. This study aimed to see if this concept held true or whether these seeming indicators of success have negative side effects. The main result of this study is that, even though the games of duration and age have similarities, they are sufficiently diverse to be considered separate games, which need different resources. To graduate with a short duration of studies, it is important for a student to successfully view and navigate the university field, tailoring one’s studies and extracurricular activities to suit the individual. In the game of youth, the background of the student seemed to be of greater importance. The youngest graduates had spent more time with their parents, who also had higher educational qualifications. They also had higher achievement in their previous studies. This seems to indicate that their background allowed them to assimilate a better understanding of the school and university fields and that playing the university game was natural for them. As for the aspect of success, it seems that there are many ways to define the term. Youth on graduation and short duration of studies can be seen as two indicators of success. Both revealed negative and positive outcomes, even though short duration of studies seemed more often to be connected with positive outcomes. However, it seems that the best indicator for success is the way in which students organize study into their lives to support and suit their needs and abilities to realize a meaningful life and a successful entry into the field of work.

Kuka suunnittelee mainokset? Tutkimus mainosalan kulisseista,yhteistyökäytännöistä ja ristiriidoista. Mainonnan suunnittelijan näkökulma

Tutkimus kuvaa tapahtumia mainonnan suunnittelun kulissien takana ja niiden vaikutusta suunnittelutyöhön mainonnan suunnittelijan näkökulmasta. Lähestymistapa on systeemiteoreettinen: tutkimuksessa tarkastellaan sekä mainostoimiston suunnittelijoiden, projektijohtajien ja muiden mainonnan suunnitteluun osallistuvien keskinäistä vuorovaikutusta että mainostoimiston ja mainoksia tilaavan asiakkaan vuorovaikutuksen asettamia rajoja ja mahdollisuuksia. Keskeinen työväline on Kurt Lewinin kentän käsite. Tutkimuksessa se konkretisoituu esitystavaksi mainonnan suunnittelun olennaisista piirteistä, jotka ovat toisistaan riippuvaisia. Tutkimusta pohjustaa ajatus mainonnan suunnittelun perusrakenteesta, joka on riippumaton taloudellisista, yhteiskunnallisista tai mainostoimialan liiketoimintaympäristön muutoksista. Mainostoimistossa työtä tehdään usein ryhmässä. Ydinryhmä muodostuu kirjoittavan ja visuaalisen suunnittelijan työparista, mutta projektijohtaja on avainasemassa hoitaessaan yhteydenpitoa mainostoimiston asiakkaaseen. Tutkimustyötä viitoittivat kysymykset mainonnan suunnittelijoiden tehtävästä ja asemasta, työssä koetuista haasteista sekä osuudesta ja vastuusta lopullisissa töissä. Keskiössä ovat suunnittelutyötä raamittavat haasteet, jotka ohjaavat suunnittelijoiden kykyjä ja haluja toteuttaa luovuuttaan. Tutkimus ammentaa teoreettisia aineksia työnjaon ja tiimityön käsitteiden ohella vallan tilanteisuudesta ja suhteista sekä sosiaalisen pääoman ja luottamuksen moniaineksisuudesta. Tutkimuksen aineisto kerättiin syksyllä 2008 ja alkuvuodesta 2009 haastattelemalla suomalaisten mainostoimistojen suunnittelijoita. Haastatteluaineisto koostuu kymmenestä ryhmähaastattelusta, johon kuhunkin osallistui 3–4 suunnittelijaa. Muu aineisto sisältää toimialan tilastoja ja julkaisuja sekä yksityisiä sähköpostikirjeenvaihtoja ja keskusteluja mainosammattilaisten kanssa. Haastatteluaineisto analysoitiin Milesin ja Hubermannin aineistolähtöisen sisällönanalyysin avulla ja sitä täydennettiin retorisella diskurssianalyysilla. Analyysin alkuvaiheessa koemetodina sovellettiin Straussin ja Corbinin aineistolähtöisen teorian (grounded theory) kolmivaiheista koodausta. Tutkimuksen tuloksena on malli mainonnan suunnittelun kentän jännitteistä, jotka johtavat toimimaan tietyllä tavalla. Mainonnan suunnittelijan tehtävinä näyttäytyvät vaikuttaminen, asiakkaan tarpeiden tunnistaminen ja tyydyttäminen sekä omakohtainen menestyminen. Suunnittelijan asema näyttää työssä koettujen haasteiden kautta häilyvän asiantuntijuuden ja alihankkijuuden välimaastossa. Työn henkilökohtaisina haasteina piirtyvät tarmokkuuden ja jatkuvan oivaltamisen vaateet. Ulkoisina tekijöinä talouden, teknologian ja sen myötä median murros sekä haastaa että kehittää: alituiseen kiireeseen näytetään verhoavan pulmia, joiden todellinen alkuperä paikantuu muualle. Keskeiset ristiriidat ja toiminnan edellytykset ilmenevät juuri yhteistyössä: mainostoimiston sisäinen yhteistyö ja asiakkaan antama palaute ovat merkittäviä tekijöitä luottamuksen taustalla. Siten avoin ja vastavuoroinen kommunikaatio piirtyy olennaiseksi asetettujen tavoitteiden saavuttamisessa ja asiakkaan menestymisessä. Mainonnan suunnittelussa tärkeäksi kysymykseksi nousevat portinvartijoiden roolit. Mainostoimiston sisäisessä työskentelyssä projektijohtajat hallinnoivat suunnitteluresursseja, välittävät tietoa asiak kaalta suunnittelijalle ja päinvastoin sekä tekevät tärkeimmät päätökset. Asiakkaan puolella mainoksia tilaava asiakashenkilö hallinnoi valjastamiaan resursseja, mutta varsinainen päätöksenteko tapahtuu tämän esimiehen toimesta. Tulosten valossa on perusteltua uskoa, että mainonnan suunnittelijat kokevat oman työnsä arvon alentuneen ja päätösvaltansa vähentyneen. Mainostoimialan murroksen kannalta tutkimus tuo esiin uudenlaisen tiimityön ymmärtämisen ja korostaa yksilöiden vahvuuksien tunnistamisen merkitystä. Kiristyvässä taloudessa se suuntaa huomion sekä mainostoimistojen että niiden asiakasyritysten sisäisten ja ulkoisten resurssien tehokkaaseen ja tuottavaan hyödyntämiseen ja organisoimiseen. Sosiologisesti tutkimus tarjoaa yhdenlaisen näkökulman ryhmätyön ulottuvuuksiin ja työelämän yhteistyöhaasteiden pohtimiseen. Siten tutkimuksen tuloksilla voi nähdä arvoa myös muiden kuin mainosalan yhteistyökäytäntöjentarkasteluun.

Mobile system for pump working point estimation

In the current economy situation companies try to reduce their expenses. One of the solutions is to improve the energy efficiency of the processes. It is known that the energy consumption of pumping applications range from 20 up to 50% of the energy usage in the certain industrial plants operations. Some studies have shown that 30% to 50% of energy consumed by pump systems could be saved by changing the pump or the flow control method. The aim of this thesis is to create a mobile measurement system that can calculate a working point position of a pump drive. This information can be used to determine the efficiency of the pump drive operation and to develop a solution to bring pump’s efficiency to a maximum possible value. This can allow a great reduction in the pump drive’s life cycle cost. In the first part of the thesis, a brief introduction in the details of pump drive operation is given. Methods that can be used in the project are presented. Later, the review of available platforms for the project implementation is given. In the second part of the thesis, components of the project are presented. Detailed description for each created component is given. Finally, results of laboratory tests are presented. Acquired results are compared and analyzed. In addition, the operation of created system is analyzed and suggestions for the future development are given.

Working Capital Management: a Bibliometric Study

This thesis is a study of articles published in scientific journals about working capital management using bibliometric methods. The study was restricted to articles published in 1990–2010 that deal with the whole working capital management topic not a single sub-area of it. Working capital is defined as current assets minus current liabilities; sometimes also a definition of inventory plus accounts receivable minus accounts payable is used. The data was retrieved from the databases ISI Web of Science and Sciverse Scopus. Articles about working capital management were found 23. Content analysis, statistical analysis and citation analysis was performed to the articles. The most cited articles found in citation analysis were also analyzed by nearly same methods. This study found that scientific research of working capital management seems not to be concentrated to specific persons, organizations or journals. The originality and novelty in many articles is low. Many articles studied relation between working capital management and profitability in firms or working capital management practices of firms using statistical analyses. Data in articles was firms of all sizes, except in developing economies only big firms were used. Interesting areas for future research could be surveys made about working capital management practices in firms, finding of best practices, tools for working capital management, inventing or improving alternative views to working capital management like process-oriented view and firm or industry specific studies.

Working capital management in the value chain of automotive industry

The objective of this Master’s thesis is to examine working capital management in the automotive industry in years 2006-2008. The study is conducted by the analysis of financial statements. The sample consists of 65 companies that represent different stages in the value chain of automotive industry beginning from raw material suppliers and ending to car dealers. Working capital management is studied by the cash conversion cycle (CCC). The results show that the average CCC of the value chain is 67 days. Car manufacturers had the longest CCC, 106 days, whereas the CCC of oil companies was the shortest, 22 days. The findings suggest that the cycle time of working capital usually follows the cycle time of inventories, since the changes in cycle times of accounts receivable and payable compensate each other. Improvements in working capital management could be achieved by sharing more accurate information in the chain for example about inventory levels and order points of customer. It could also be discussed within the automotive industry, if the long credit periods, which tie up working capital, are really needed. New technologies enable faster payments, which would reduce the cash conversion cycles, improve the profitability of companies, and increase the competitiveness of the value chain. Working capital should not be reduced at the expense of value chain partners, because nowadays the competition is rather between the value chains than between the companies. Similar research design is applied earlier to study working capital management in the value chain of pulp and paper industry. Even if the industries and the structures of the chains differ from each other, results were surprisingly similar. In future research, working capital management in other industries’ value chains could still be studied and compared to previous studies. ICT industry, for example, could be an interesting object.

Working capital management in the small and medium-sized enterprises Case: Project-based business environment in Flowrox Oy

This Master´s thesis illustrates how growing a business ties up the company´s working capital and what the cost of committed capital. In order to manage a company´s working capital in rapid business growth phase, the thesis suggests that by monitoring and managing the operating and cash conversion cycles of customers´ projects, a company can find ways to secure the required amount of capital. The research method of this thesis was based on literature reviews and case study research. The theoretical review presents the concepts of working capital and provides the background for understanding how to improve working capital management. The company in subject is a global small and medium-sized enterprise that manufactures pumps and valves for demanding process conditions. The company is expanding, which creates lots of challenges. This thesis concentrates to the company´s working capital management and its efficiency through the supply chain and value chain perspective. The main elements of working capital management are inventory management, accounts receivable management and accounts payable management. Prepayments also play a significant role, particularly in project-based businesses. Developing companies´ working capital management requires knowledge from different kind of key operations´ in the company, like purchasing, production, sales, logistics and financing. The perspective to develop and describe working capital management is an operational. After literature reviews the thesis present pilot projects that formed the basis of a model to monitor working capital in the case company. Based on analysis and pilot projects, the thesis introduces a rough model for monitoring capital commitments in short time period. With the model the company can more efficiently monitor and manage their customer projects.

The role of advance payments in working capital management and profitability

The objective of this thesis is to study the role of received advance payments in working capital management by creating a new measurement and to study the relationship between advance payments and profitability. The study has been conducted using narrative literature review and quantitative research methods. The research was made analyzing 108 companies listed in Helsinki Stock Exchange. The results indicate that 68 % of the studied companies are receiving advance payments and the average cycle time for received advance payments is 13 days. A new key figure is created to include received advance payments into the calculation of working capital. Received advance payments shorten the working capital cycle, by 13 days, when they are used in the calculation. The role of advance payments is not as significant as the role of receivables and inventories but advance payments may have a larger role than payables if the company is receiving noticeable amounts of advance payments. There are three branches where companies are receiving more advance payments than average companies. The branches are project business and ICT and publishing sectors. There is a negative correlation between profitability and advance payments based on the results of this study.

Towards Inter-organizational Working Capital Management

Working capital is an investment which is tied up into the inventories and accounts receivable and which is released with accounts payable. Due to the current business landscape with tightened financial conditions and finance markets, organizations emphasize efficient working capital management. With efficient working capital management, a company can reduce the need of finance, free up cash, increase profitability, improve liquidity, increase the efficiency of operations, and decrease (financing) costs. From the perspective of an individual company, efficient working capital management means decreasing inventory levels by shortening the cycle time of inventories, decreasing accounts receivable by shortening the trade credit terms and effective collection procedures, and increasing the level of accounts payable by paying the suppliers later. From an inter-organizational perspective, however, working capital should not be sub-optimized by a single company but holistic view to working capital management through the supply chain should be adopted to create value and improve performance together. The purpose of this research is to take academic research as well as practical management towards inter-organizational working capital management. The thesis discusses the benefits as well as mechanisms of working capital management in the inter-organizational context and has two main objectives: (1) to examine the effect of inter-organizational working capital management on performance in the value chain context and (2) to develop models of working capital management for internal as well as inter-organizational value chains. The results of the archival research conducted in the value chain of the pulp and paper industry and the value chain of the automotive industry indicate that companies can increase relative profitability by managing working capital comprehensively by taking into account all three components, and holistically though the value chain. Companies in the value chain benefit from different strategies in working capital management depending on the position of the company in the value chain. This can be taken into account in inter-organizational working capital management. The effects of inter-organizational working capital management actions on the financing costs of working capital were studied via simulations. Simulations also show that the value chain and individual companies benefit from an inter-organizational view to working capital management. Inter-organizational working capital management actions include for example: shortening the cycle time of inventories, reducing product costs, shifting inventories, shortening payment terms, and considering the cost of capital. The thesis also provides solutions for the practical requirements for tools to control working capital. The design science part of the research introduces the adjusted cash conversion cycle (ACCC) model for internal value chains, as well as models for working capital management in the inter-organizational value chain context: the working capital management model (WCMM) and the financial cycle time model (FCTM) designed in corporation and product levels respectively. This research contributes to literature on working capital management and interorganizational accounting. The research gives a holistic, inter-organizational view to the management of working capital. It advances the knowledge in working capital management on operational level, increases knowledge in the recently risen theme of supply chainoriented, collaborative working capital management, combines management accounting research with supply chain management research, and contributes to the demand of practical inter-organizational accounting methods. In addition, the research has strong practical focus as new managerial methods are introduced.

Virtual technology and haptic interface solutions for design and control of mobile working machines

Commercially available haptic interfaces are usable for many purposes. However, as generic devices they are not the most suitable for the control of heavy duty mobile working machines like mining machines, container handling equipment and excavators. Alternative mechanical constructions for a haptic controller are presented and analysed. A virtual reality environment (VRE) was built to test the proposed haptic controller mechanisms. Verification of an electric motor emulating a hydraulic pump in the electro-hydraulic system of a mobile working machine is carried out. A real-time simulator using multi-body-dynamics based software with hardware-in-loop (HIL) setup was used for the tests. Recommendations for further development of a haptic controller and emulator electric motor are given.