Balanced Scorecardin implementointi ja käytön nykytila Suomessa

Lisääntynyt Balanced Scorecardin käyttö herätti kiinnostuksen tutkia, mistä BSC:ssä oli oikein kysymys. Epäonnistumiset BSC-projekteissa vaikuttivat siihen, että haluttiin tutkia, mikä nykyisissä projektimalleissa oli vikana. Kirjallisuudessa on esitetty useita BSC:n käyttöönoton projektimalleja, joista tunnetuin on Kaplanin ja Nortonin kehittämä malli. Alun perin kyseessä oli varsin operatiivinen suoritusmittaristo, jonka tavoitteena oli nostaa ei-taloudelliset mittarit taloudellisten mittareiden rinnalle. Sittemmin lähestymistapa onlaajentunut strategiapohjaiseksi johtamisen järjestelmäksi, mutta mallin rakentamisessa on vielä puutteita. Havaitut puutteet BSC-projektimalleissa loivat tarpeen uuden mallin kehittämiselle. Tutkimuksen tavoitteena oli kehittää suomalaisten yritysjohtajien ja alan asiantuntijoiden avulla BSC-projektimalli, jota käyttämällä yritykset voisivat menestyksekkäämmin toteuttaa BSC-projektinsa. Lisäksi tavoitteena oli selvittää BSC:n käytön nykytila Suomen 500 suurimmassa yrityksessä. Tutkimuksessa haluttiin myös hankkia tietoa siitä, miksi yritykset olivat lähteneet BSC-projektiin, mitkä tekijät vaikuttivat BSC-projektin onnistumiseen jamitä muutoksia yritykset olivat tehneet BSC:n käytännön kokemuksen pohjalta. Tutkimuksen teoriaosassa tarkasteltiin yrityksen strategista suunnittelua ja johtamista, yrityksen johtamisessa käytettyjä ohjausjärjestelmiä, toiminnan kehittämistä ja BSC-projektien toteuttamista. Tutkimuksen empiriisessä osassa kehitettiinkymmenvaiheinen BSC-projektin toteuttamismalli. Se tehtiin tutustumalla 15 konsultointiyrityksen tapaan toteuttaa BSC-projekti ja paneutumalla 50 yrityksen BSC-projektista saamiin kokemuksiin. Kehitettyä mallia testattiin Tulikivi-casessa,ja sitä arvioitiin kyselytutkimuksessa ja työistunnossa. Kyselytutkimuksen mukaan ensimmäiset suomalaiset yritykset aloittivat BSC:n käytön vuonna 1995. Vuonna1996 käyttö yleistyi jonkin verran, ja vuosia 1997 ja 1998 voidaan Suomessa kutsua BSC:n läpimurtovuosiksi. Vastanneista yrityksistä 23,2 % ilmoitti käyttävänsä BSC:tä. Yrityksistä 14,8 % oli ottamassa sitä käyttöön, ja 19,2 % harkitsi käyttöönottamista. Yritykset olivat lähteneet BSC-projektiin mm. paremman ohjausjärjestelmän, toiminnan tehostamisen ja muutoksen aikaansaamisen toivossa. BSC-projektin onnistumisen tärkeimpinä tekijöinä pidettiin johdon sitoutumista hankkeeseen, mittariston kytkeytymistä strategiaan ja mittareiden selkeyttä. BSC:n nähtiin vaikuttaneen yrityksissä eniten liiketoiminnan kokonaisuuden ymmärtämiseen, strategian toteutumiseen ja ei-taloudellisten asioiden seurantaan. Yrityksissä olimuutettu toimintaa mm. niin, että se suuntautuisi enemmän asiakkaisiin ja tulevaisuuteen. Tulevaisuudessa BSC:llä uskottiin olevan suurimmat vaikutukset kokonaisvaltaiseen ja strategiseen johtamiseen sekä strategian toteutumisen seurantaan. Kyselytutkimuksen perusteella voitiin osoittaa, että suuret yritykset käyttävät BSC:tä enemmän kuin pienet yritykset. Myös alueellisia eroja on: pääkaupunkiseudulla BSC:tä käytetään enemmän kuin muualla maassa. Mitä kannattavammaksi kyselyyn vastaaja arvioi yrityksensä, sitä parempana se piti tässä tutkimuksessa kehitettyä BSC-projektimallia verrattuna Kaplanin ja Nortonin kehittämään BSC-projektimalliin. BSC-projekti on niin kokonaisvaltainen, että sen onnistuminen edellyttää koko henkilöstön osallistuvan siihen. Ylimmän johdon aito sitoutuminen on välttämätöntä, jotta BSC-projekti saa riittävästi resursseja. Projektissa visio jastrategiat puretaan käytännön toimiksi, joten ilman ylimmän johdon mukanaoloa projektilla ei ole asiakasta. Keskijohto ja henkilöstö toteuttavat laaditut strategiat, jolloin heidän panoksensa on erittäin merkittävä projektin onnistumiseksi. Henkilöstö pitää saada osallistumaan mittaristotyöhön, jotta he sitoutuisivat asetettuihin tavoitteisiin. Ellei henkilöstöä saada mukaan, mittaristo jää helposti ylimmän johdon työkaluksi. Tällöin strategian toteuttaminen koko organisaatiossa on hyvin työlästä, jopa mahdotonta. Mittariston pitää olla strategialähtöinen, eikä se saa olla liian monimutkainen. Mitä alemmalle tasolle organisaatiossamennään, sitä yksinkertaisempi mittariston pitää olla. Ylimmillä tasoilla mittareita voi olla kahdeksasta kahteentoista, mutta alemmilla tasoilla niitä on oltava hieman vähemmän. Projektin nopea läpivienti yrityksessä ei saa olla itsetarkoitus, mutta nopeasti saadut konkreettiset tulokset auttavat, että projekti saa resursseja ja mahdollistavat palautteen saamisen ja oppimisen. Kerralla ei BSC:täsaada täydellisesti toimivaksi, vaan se on oppimisprosessi, joka mahdollistaa syvällisemmän strategian toteuttamiseen. Tässä tutkimuksessa kehitetty BSC-projektin toteuttamismalli perustuu kymmenien asiantuntijoiden kokemuksiin ja näkemyksiin BSC-projektin toteuttamisesta. Kyselytutkimuksesta, työistunnosta ja Tulikivi-casesta saadut tulokset osoittavat, että kehitetyn mallin avulla yrityksillä on entistä paremmat mahdollisuudet saada BSC-projekti onnistumaan. Näin tutkimuksen päätavoite saavutettiin. Muut tavoitteet saavutettiin kyselytutkimuksen tulosten avulla.

Project Success through Effective Decisions: Case Studies on Project Goal Setting, Success Evaluation and Managerial Decision Making

The objective of the thesis is to structure and model the factors that contribute to and can be used in evaluating project success. The purpose of this thesis is to enhance the understanding of three research topics. The goal setting process, success evaluation and decision-making process are studied in the context of a project, business unitand its business environment. To achieve the objective three research questionsare posed. These are 1) how to set measurable project goals, 2) how to evaluateproject success and 3) how to affect project success with managerial decisions.The main theoretical contribution comes from deriving a synthesis of these research topics which have mostly been discussed apart from each other in prior research. The research strategy of the study has features from at least the constructive, nomothetical, and decision-oriented research approaches. This strategy guides the theoretical and empirical part of the study. Relevant concepts and a framework are composed on the basis of the prior research contributions within the problem area. A literature review is used to derive constructs of factors withinthe framework. They are related to project goal setting, success evaluation, and decision making. On the basis of this, the case study method is applied to complement the framework. The empirical data includes one product development program, three construction projects, as well as one organization development, hardware/software, and marketing project in their contexts. In two of the case studiesthe analytic hierarchy process is used to formulate a hierarchical model that returns a numerical evaluation of the degree of project success. It has its origin in the solution idea which in turn has its foundation in the notion of projectsuccess. The achieved results are condensed in the form of a process model thatintegrates project goal setting, success evaluation and decision making. The process of project goal setting is analysed as a part of an open system that includes a project, the business unit and its competitive environment. Four main constructs of factors are suggested. First, the project characteristics and requirements are clarified. The second and the third construct comprise the components of client/market segment attractiveness and sources of competitive advantage. Together they determine the competitive position of a business unit. Fourth, the relevant goals and the situation of a business unit are clarified to stress their contribution to the project goals. Empirical evidence is gained on the exploitation of increased knowledge and on the reaction to changes in the business environment during a project to ensure project success. The relevance of a successful project to a company or a business unit tends to increase the higher the reference level of project goals is set. However, normal performance or sometimes performance below this normal level is intentionally accepted. Success measures make project success quantifiable. There are result-oriented, process-oriented and resource-oriented success measures. The study also links result measurements to enablers that portray the key processes. The success measures can be classified into success domains determining the areas on which success is assessed. Empiricalevidence is gained on six success domains: strategy, project implementation, product, stakeholder relationships, learning situation and company functions. However, some project goals, like safety, can be assessed using success measures that belong to two success domains. For example a safety index is used for assessing occupational safety during a project, which is related to project implementation. Product safety requirements, in turn, are connected to the product characteristics and thus to the product-related success domain. Strategic success measures can be used to weave the project phases together. Empirical evidence on their static nature is gained. In order-oriented projects the project phases are oftencontractually divided into different suppliers or contractors. A project from the supplier's perspective can represent only a part of the ¿whole project¿ viewed from the client's perspective. Therefore static success measures are mostly used within the contractually agreed project scope and duration. Proof is also acquired on the dynamic use of operational success measures. They help to focus on the key issues during each project phase. Furthermore, it is shown that the original success domains and success measures, their weights and target values can change dynamically. New success measures can replace the old ones to correspond better with the emphasis of the particular project phase. This adjustment concentrates on the key decision milestones. As a conclusion, the study suggests a combination of static and dynamic success measures. Their linkage to an incentive system can make the project management proactive, enable fast feedback and enhancethe motivation of the personnel. It is argued that the sequence of effective decisions is closely linked to the dynamic control of project success. According to the used definition, effective decisions aim at adequate decision quality and decision implementation. The findings support that project managers construct and use a chain of key decision milestones to evaluate and affect success during aproject. These milestones can be seen as a part of the business processes. Different managers prioritise the key decision milestones to a varying degree. Divergent managerial perspectives, power, responsibilities and involvement during a project offer some explanation for this. Finally, the study introduces the use ofHard Gate and Soft Gate decision milestones. The managers may use the former milestones to provide decision support on result measurements and ad hoc critical conditions. In the latter milestones they may make intermediate success evaluation also on the basis of other types of success measures, like process and resource measures.

Wireless e-Business Applications - Methods for Forecasting the Demand of Wireless Services and Technologies

Tämä tutkimus oli osa sähköistä liiketoimintaa ja langattomia sovelluksia tutkivaa projektia ja tutkimuksen tavoitteena oli selvittää ennustamisen rooli päätöksenteko- ja suunnitteluprosessissa ja määrittää parhaiten soveltuvat ja useimmin käytetyt teknologian ennustusmenetelmät. Ennustusmenetelmiä tarkasteltiin erityisesti uuden teknologian ja pitkän aikavälin ennustamisen näkökulmasta. Tutkimus perustui teknologista ennustamista, pitkän aikavälin suunnittelua ja innovaatioprosesseja käsittelevän kirjallisuuden analysointiin. Materiaalin perusteella kuvataan teknologian ennustamista informaation hankkimisvälineenä organisaatioiden suunnitteluprosessin apuna. Työssä arvioidaan myös seuraavat teknologisen ennustamisen menetelmät: trendianalyysi-, Delfoi-, cross-impact analyysi-, morfologinen analyysi- ja skenaario analyysimenetelmä. Työ tuo esille jokaisen ennustusmenetelmä ominaispiirteet, rajoitukset ja sovellusmahdollisuudet. Käyttäen esiteltyjä menetelmiä, saadaan kerättyä hyödyllistä informaatiota tulevaisuuden näkymistä, joita sitten voidaan käyttää hyväksi organisaatioiden suunnitteluprosesseissa.

Information and Material Flows in Project Business

Tavoitteena diplomityössä oli kuvata projektiliiketoimintaa harjoittavan yrityksen informaatio- ja materiaalivirrat toimitusprojekteissa. Selvitys haluttiin tehdä tulevia kehitysprojekteja varten. Diplomityö toteutettiin kahessa osassa: laatimalla aiheeseen liittyvä teoriakatsaus ja kartoittamalla todellinen tilanne yrityksen sisällä.Teoriaosassa kuvattiin tarkastelualue ja projektiliiketoiminnan erityispiirteitä sekä käsiteltiin tietojärjestelmiä ja materiaalivirran hallintaan liittyviä asioita. Yrityksen informaatio- ja materiaalivirtojen nykytila kartoitettiin laatimalla vuokaaviot kolmen esimerkkituotteen toimitusprojekteista. Kaaviot laadittiin yrityksen sisäisten dokumenttien ja kvalitatiivisten haastattelujen pohjalta. Kaavioiden sisältöä täydennettiin taulukoimalla kaavioissa esiintyvien dokumettien sisältöä. Työn tuloksena muodostui kuva tiedonkäsittelyn nykytilasta myynti- ja toimitusprojekteissa, pelkistetty visio tulevaisuuden tietojärjestelmien rooleista sekä ehdotuksia tulevia kehitysprojekteja varten.

Integration and Implementation of Accounting Information Systems in Global Companies Case: The UPM-Kymmene Group

Tämän tutkielman tavoitteena on perehtyä globaalin yrityksen laskentatoimen tietojärjestelmien yhtenäistämiseen ja käyttöönottoon esimerkkinä UPM-Kymmene konsernin projekti. Tutkielmassa sovelletaan hermeneuttista tutkimusotetta. Teoreettisesti aihetta tarkastellaan globalisoitumisen ja laskentatoimen tietojärjestelmille asetettavien vaatimusten pohjalta, sekä järjestelmän muutosprosessin eri vaiheissa huomioon otettavien muuttujien perusteella. Yhtenäisen laskentatoimen tietojärjestelmän tuomat edut globaalille yritykselle ovat ilmeisiä. Ennen yhtenäisen projektin kehittelyä on olennaista tutkia lähtökohdat projektin onnistumiselle ja suunnitella projektin eri vaiheet huolella. Tutkielmassa havaitaan myös, että globaalissa yrityksessä tulee huomioida eri yrityskulttuurit sekä tulosyksiköiden erilaiset toimintatavat. Johtopäätöksenä todetaan, että sekä yritysjohdon että tulosyksiköiden sitoutuneisuus projektiin ja yhtenäiset tavoitteet ovat oleellisia projektin onnistumisen kannalta.

The Strategic Intent and Launching of a Knowledge Management Tool in a Complex Organisation, case Stora Enso Consumer Boards

Informaatiotulva ja organisaation monimutkaisuus luoneet tarpeen tietämyksen hallinnalle. Tämän tutkimuksen tavoitteena on tunnistaa muutostarpeet, jotka portaalin käyttöönotto tietämyksenhallintatyökaluna luo. Tutkimuksessa verrataan myös uusia työkaluja olemassa oleviin sekä arvioidaan organisaation kykyä siirtää tietämystä virtuaalisesti. Kirjallisuutta vastaavanlaisista projekteista ei ole ollut saatavilla, sillä käyttöönotettava teknologia on melko uutta. Samaa teknologiaa on käytössä hieman eri alueella, kuin tässä projektissa on tavoitteena. Tutkimus on tapaustutkimus, jonka pääasialliset lähteet ovat erilaisissa kokouksissa tuotettuja dokumentteja. Tutkija on osallistunut aktiivisesti projektityöhön, joten osa taustatiedoista perustuu tutkijan huomioihin sekä vielä keskusteluihin. Teoriaosassa käsitellään tietämyksen jakamista tietämyksen hallinnan ja virtuaalisuuden näkökulmasta. Muutoksen hallintaa on käsitelty lyhyesti tietämyksenhallintatyökalun käyttöönotossa. Tutkimus liittyy Stora Enso Consumer Boardsin tietämyksen hallintaprojektiin.

A Model for Product Transfer Project

In this thesis a model for managing the product data in a product transfer project was created for ABB Machines. This model was then applied for the ongoing product transfer project during its planning phase. Detailed information about the demands and challenges in product transfer projects was acquired by analyzing previous product transfer projects in participating organizations. This analysis and the ABB Gate Model were then used as a base for the creation of the model for managing the product data in a product transfer project. The created model shows the main tasks during each phase in the project, their sub-tasks and relatedness on general level. Furthermore the model emphasizes need for detailed analysis of the situation during the project planning phase. The created model for managing the product data in a product transfer project was applied into ongoing project two main areas; manufacturing instructions and production item data. The results showed that the greatest challenge considering the product transfer project in previously mentioned areas is the current state of the product data. Based on the findings, process and resource proposals for both the ongoing product transfer project and the BU Machines were given. For manufacturing instructions it is necessary to create detailed process instructions in receiving organizations own language for each department so that the manufacturing instructions can be used as a training material during the training in sending organization. For production item data the English version of the bill of materials needs to be fully in English. In addition it needs to be ensured that bill of materials is updated and these changes implemented before the training in sending organization begins.

Supplier's position in project marketing networks

The present study explores relationships between project marketers and their customers in project marketing context. The purpose of the study is to increase the understanding on supplier’s position in project marketing networks. Project marketing is representing a high volume in the international business, and the industrial network approach and the project marketing research cannot fully explain a supplier’s position in project marketing networks. Increased knowledge on project networks can also contribute to industrial marketing research more generally. Data for the present study was collected firstly during the pilot case study from project buyers in the paper and the steel industry in interviews. Secondly an entire project marketing case concerning a steel industry case was used as a data source. The data included interviews, correspondence between the supplier and the buyer, and project documents. The data of the pilot case was analysed with contents analysis, and in the case a deeper analysis based on the developed Stage Dimension framework was used. Supplier’s position in project marketing networks is a hierarchical and dynamic concept including a supplier’s position on the highest level. The dimensions of the position concept are the intermediate level, and the dimensions are based on the underlying components. Supplier’s position is composed from four organization related dimensions, and two individual actor related dimensions. The composition of the supplier’s position varies during the project marketing process, and consequently the relative importance of the dimensions is changing over the process. Supplier’s position in project marketing networks is shaped by incremental and radical changes. Radical changes are initiated by critical events. The study contributes to the research of industrial networks and project marketing. The theoretical contribution of the study is threefold: firstly it proposes a structure of the position concept in project marketing networks, secondly it proposes the Position Stage Dimension Component (PSDC) model for the development of supplier’s position during the project marketing process, and thirdly the study widens the critical event concept to cover the project marketing process both on the organizational and individual level. In addition to the theoretical contributions there are several managerial implications for planning and implementing marketing strategies in the project context.

Factors of customer project profitability in an engineering industrial enterprise

The purpose of the study is to find factors affecting projects' profitability in project business. The issue is approached from customer profitability and project management point of view. The study has been made for a big Finnish company acting in a global market place. The research method is quantitative. Research hypotheses are based on the literature. The used database is originated from the company's ERP- (enterprise resource planning) and project financial follow-up —system. The findings of the study supported the hypotheses weakly. Obviously profitability fluctuated depending on a customer and a project manager. The reasons could not be justified with the variables used in the research.

Success factors of customer and supplier master data system

Especially in global enterprises, key data is fragmented in multiple Enterprise Resource Planning (ERP) systems. Thus the data is inconsistent, fragmented and redundant across the various systems. Master Data Management (MDM) is a concept, which creates cross-references between customers, suppliers and business units, and enables corporate hierarchies and structures. The overall goal for MDM is the ability to create an enterprise-wide consistent data model, which enables analyzing and reporting customer and supplier data. The goal of the study was defining the properties and success factors of a master data system. The theoretical background was based on literature and the case consisted of enterprise specific needs and demands. The theoretical part presents the concept, background, and principles of MDM and then the phases of system planning and implementation project. Case consists of background, definition of as is situation, definition of project, evaluation criterions and concludes the key results of the thesis. In the end chapter Conclusions combines common principles with the results of the case. The case part ended up dividing important factors of the system in success factors, technical requirements and business benefits. To clarify the project and find funding for the project, business benefits have to be defined and the realization has to be monitored. The thesis found out six success factors for the MDM system: Well defined business case, data management and monitoring, data models and structures defined and maintained, customer and supplier data governance, delivery and quality, commitment, and continuous communication with business. Technical requirements emerged several times during the thesis and therefore those can’t be ignored in the project. Conclusions chapter goes through these factors on a general level. The success factors and technical requirements are related to the essentials of MDM: Governance, Action and Quality. This chapter could be used as guidance in a master data management project.

Agile CRM System Implementation Project

The application of information technology (IT) in customer relationship management (CRM) is growing rapidly as many companies implement CRM systems to support their numerous customer facing activities. However, failure rates of CRM projects remain notably high as they deliver scant solutions and poor user acceptance. As a consequence, it is justified to study previously researched CRM success factors and apply them to CRM system implementation. The aim of this master’s thesis was to get acquainted with relevant academic theories, frameworks and practices concerning CRM and agile development, and use them to generate a modified CRM project strategy to support the successful execution of the case company’s, Process Vision Oy, CRM implementation project. The empirical CRM system implementation project was conducted simultaneously with writing this thesis. Its theoretical findings could be transferred into practice through active participation in the CRM system development and deployment work. The project’s main goal was to produce and take into use a functioning CRM system. The goal was met, since at the time of printing this thesis the first system release was successfully published to its users at Process Vision’s marketing and sales departments. The key success elements in the CRM project were cyclic, iterative system development, customer oriented approach, user inclusion and flexible project management. Implying agile development practices ensured being able to quickly respond to changes arising during the progress of the CRM project. Throughout modelling of the core sales process formed a strong basis, on which the CRM system’s operational and analytical functionalities were built. End users were included in the initial specification of system requirements and they provided feedback on the system’s usage. To conclude, the chosen theoretical CRM roadmaps and agile development practices proved as beneficial in the successful planning and execution of the agile CRM system implementation project at Process Vision.

Project and customer profitability analysis: an empirical case study

The objective of this case study is to provide a Finnish solution provider company an objective, in-depth analysis of their project based business and especially of project estimation accuracy. A project and customer profitability analysis is conducted as a complementary addition to describe profitability of the Case Company’s core division. The theoretical framework is constructed on project profitability and customer profitability analysis. Project profitability is approached starting from managing projects, continuing to project pricing process and concluding to project success. The empirical part of this study describes the Case Company’s project portfolio, and by means of quantitative analysis, the study describes how the characteristics of a project impact the project’s profitability. The findings indicate that it really makes a difference in project portfolio’s estimated and actual profitability when methods of installation and technical specifications are scrutinized. Implications on profitability are gathered into a risk assessment tool proposal.

Production planning development in global manufacturing company

Larox Corporation is a provider of full service filtration in solid and liquid separation. Larox develops, designs, manufactures and supplies industrial filters. By Larox’s continuous development principle, a project for more efficient production was started. At the same time production planning was taken under review. Aim for this Master’s thesis was to find software designed for production planning purposes replacement for old Microsoft Excel based method. In this Master’s thesis current way of production planning was thoroughly analyzed and improvement targets were specified and also requirements for new software were assigned. Primary requirements for new software were possibility to production scheduling, planning, follow-up and also for long-time capacity planning and tracking. Also one demand was that new software should have data link to Larox’s current ERP-system. Result of this Master’s thesis was to start using Larox’s ERP-system also for production planning purposes. New mode of operation fulfils all requirements which were placed to new system. By using new method of production planning, production planners can get more easier and reliable data than from current system.

Externally excited synchronous machine: Testing the automation concept

This bachelor’s thesis is a part of the research project realized in the summer 2011 in Lappeenranta University of Technology. The goal of the project was to develop an automation concept for controlling the externally excited synchronous motor. Thesis concentrates on the testing planning and testing the system. Testing plan was made for three sectors: For the PLC program testing, for the communication testing and for the whole system testing. PLC program was tested with white box and destructive methods. Communication testing was done by switching maximum com-munication speed and checked if communication was reliable. Whole system testing included among other things speed and torque controlling. The system was tested with exploratory testing also. This enabled more reliable and broader testing than with systematical testing only.

Integration in project business : mechanisms for integrating customers and the project network during the life-cycle of industrial projects

This thesis focuses on integration in project business, i.e. how projectbased companies organize their product and process structures when they deliver industrial solutions to their customers. The customers that invest in these solutions run their businesses in different geographical, political and economical environments, which should be acknowledged by the supplier when providing solutions comprising of larger and more complex scopes than previously supplied to these customers. This means that the suppliers are increasing their supply range by taking over some of the activities in the value chain that have traditionally been handled by the customer. In order to be able to provide the functioning solutions, including more engineering hours, technical equipment and a wider project network, a change is needed in the mindset in order to be able to carry out and take the required responsibility that these new approaches bring. For the supplier it is important to be able to integrate technical products, systems and services, but the supplier also needs to have the capabilities to integrate the cross-functional organizations and departments in the project network, the knowledge and information between and within these organizations and departments, along with inputs from the customer into the product and process structures during the lifecycle of the project under development. Hence, the main objective of this thesis is to explore the challenges of integration that industrial projects meet, and based on that, to suggest a concept of how to manage integration in project business by making use of integration mechanisms. Integration is considered the essential process for accomplishing an industrial project, whereas the accomplishment of the industrial project is considered to be the result of the integration. The thesis consists of an extended summary and four papers, that are based on three studies in which integration mechanisms for value creation in industrial project networks and the management of integration in project business have been explored. The research is based on an inductive approach where in particular the design, commissioning and operations functions of industrial projects have been studied, addressing entire project life-cycles. The studies have been conducted in the shipbuilding and power generation industries where the scopes of supply consist of stand-alone equipment, equipment and engineering, and turnkey solutions. These industrial solutions include demanding efforts in engineering and organization. Addressing the calls for more studies on the evolving value chains of integrated solutions, mechanisms for inter- and intra-organizational integration and subsequent value creation in project networks have been explored. The research results in thirteen integration mechanisms and a typology for integration is proposed. Managing integration consists of integrating the project network (the supplier and the sub-suppliers) and the customer (the customer’s business purpose, operations environment and the end-user) into the project by making use of integration mechanisms. The findings bring new insight into research on industrial project business by proposing integration of technology and engineering related elements with elements related to customer oriented business performance in contemporary project environments. Thirteen mechanisms for combining products and the processes needed to deliver projects are described and categorized according to the impact that they have on the management of knowledge and information. These mechanisms directly relate to the performance of the supplier, and consequently to the functioning of the solution that the project provides. This thesis offers ways to promote integration of knowledge and information during the lifecycle of industrial projects, enhancing the development towards innovative solutions in project business.