Osakeperusteinen palkitseminen: maksuttoman osakkeen hyödyntäminen kannustinjärjestelmissä

Tutkielman tavoitteena on selvittää osakeyhtiön palkitsemisjärjestelmiin liittyviä kysymyksiä päämies–agenttisuhteiden ja osakeyhtiöoikeudellisten periaatteiden kautta. Tutkielmassa selvitetään, kuinka maksuttomia osakkeita voidaan hyödyntää julkisen osakeyhtiön palkitsemisjärjestelmissä ja mitä haasteita ja mahdollisuuksia niiden käyttöön liittyy. Tutkimusmetodi työssä on lainopillinen ja aihetta lähestytään luontevasti kauppatieteellisen ja oikeustieteellisen näkökulman yhdistävän oikeustaloustieteen kautta. Ensisijaisena aineistona tutkielmassa käytetään voimassaolevaa lainsäädäntöä valmisteluaineistoineen ja näkökulmaa syvennetään aiemmin voimassa olleen lainsäädännön tarkastelulla. Toissijaisena aineistona tutkielmassa käytetään sekä eri asiantuntijoiden oikeudellista kirjallisuutta että palkitsemisen asiantuntijoiden laatimaa kirjallisuutta Suomesta ja muista länsimaista. Teoreettista työtä on syvennetty asiantuntijahaastattelulla ja yhtiöiden sijoittajatiedosta saatavalla informaatiolla. Merkittävin osakeyhtiön johdon ja yhtiön välisen suhteen tehokkuutta alentava seikka on päämies–agenttisuhteen valvontaongelma. Tämä liittyy päämies - agenttisuhteeseen, joka ilmenee negatiivisesti yhtiön ja yhtiön johdon intressien ristiriitatilanteissa. Valvontaongelma voi aiheuttaa ylimääräisiä transaktiokustannuksia ja tämä näkyy yhtiön toiminnan tehokkuuden laskemisena. Päämies–agenttisuhteen ratkaisuna lainsäädäntö ja erilaiset valvonnan keinot ovat tehottomia ja nykyisen yhtiöoikeudellisen ajattelun vastaisia. Tehokkaimmin valvontaongelma saadaan ratkaistua erilaisin kannustimin tapahtuvalla johdon ohjauksella. Osakesidonnainen palkitseminen on suosituin johdon ja yhtiön intressien yhdistämisen keino. Osakesidonnainen palkitseminen on parhaimmillaan eri osapuolien näkökulmasta sitouttavaa ja kannustavaa mutta osakepalkitsemisen käyttöön liittyy myös riskejä. Eräs keskeisistä yhtiöoikeudellisista periaatteista on yhdenvertaisuus, jota saatetaan loukata eri palkitsemisjärjestelmiä käytettäessä. Varojen jakoon ja järjestelmien rahoitukseen liittyy niin ikään riskejä, jotka saattavat vaarantaa järjestelmän onnistumisen. Liian avokätiset palkkiojärjestelmät taas saattavat aiheuttaa yhtiön eri sidosryhmien piirissä tyytymättömyyttä joka taas alentaa järjestelmän tehokkuutta. Yhtiön johto vastaa yhtiön strategian toteutumisesta ja linjaa Corporate Governance käytännön mukaisesti johdon palkitsemisen tavat. Yhtiön johto on kuitenkin päätöksistään vastuussa yhtiön residuaalioikeuden omaaville päämiehille, eli osakkeenomistajille. Vaikka yhtiön johto vastaa viime kädessä yhtiön toiminnasta, sen on huomioitava toiminnassaan yhtiön toiminnan tarkoitus ja sitä kautta yksittäisen osakkeenomistajan etu. Vaikka osakeyhtiössä toteutettaisiin enemmistöomistajan valitsemaa toimintalinjaa, osakeyhtiön yhdenvertaisuusperiaate korostaa juuri vähemmistöosakkeenomistajan asemaa. Johdon fidusiaaristen velvoitteiden voidaankin nähdä korostuvan johdon suhteessa vähemmistöosakkeenomistajaan. Tämä on huomioitava myös palkitsemisjärjestelmissä. Johdon palkitsemisjärjestelmien suunnittelussa ja toteutuksessa on suunnattava keskeinen huomio sen tavoitteiden toteutumiseen, eli yksittäisen osakkeenomistajan omistuksen arvon kasvattamiseen pidemmällä aikavälillä, pitäen huolta osakeyhtiön kantavista periaatteista.

Negative Regulation of Receptor Tyrosine Kinases by T-cell Protein Tyrosine Phosphatase

Protein tyrosine phosphorylation controls a wide array of cellular responses such as growth, migration, proliferation, differentiation, metabolism and cytoskeletal organisation. Tyrosine phosphorylation is a dynamic process involving the competing activities of protein tyrosine kinases and protein tyrosine phosphatases. The protein tyrosine kinases are further divided into non-receptor- and receptor tyrosine kinases. The latter are transmembrane glycoproteins activated by the binding of specific ligands, mostly growth factors, to their extracellular domain, transmitting different signals to the cell. Growth factor receptors such as the epidermal growth factor receptor, vascular endothelial growth factor receptor 2 and platelet-derived growth factor receptor β, belong to the receptor tyrosine kinases, the signalling of which is often disturbed in various diseases, including cancer. This has led to the development of receptor tyrosine kinase antagonists for use as anti-cancer drugs. As the receptor tyrosine kinases, also the protein tyrosine phosphatases can be divided into receptor- and non-receptor types. The protein tyrosine phosphatases have attained much less attention than the receptor tyrosine kinases partly because they were identified later. However, accumulating evidence shows that the protein tyrosine phosphatases have important roles as specific and active regulators of tyrosine phosphorylation in cells and of physiological processes. Consequently, the protein tyrosine phosphatases are receiving arising interest as novel drug targets. The aim of this work was to elucidate the negative regulation of receptor tyrosine kinases by one non-receptor protein tyrosine phosphatase, T-cell protein tyrosine phosphatase TCPTP. The results show that TCPTP activated by cell adhesion receptor integrin α1 functions as a negative regulator of the epidermal growth factor receptor. It was also found that TCPTP affects vascular endothelial growth factor receptor 2 signalling and angiogenesis. Lastly, a High-throughput screen with 64,280 compounds was performed to identify novel TCPTP activators, resulting in identification of one small molecule compound capable of exerting similar effects on TCPTP signalling as integrin α1. This compound is shown to downregulate signalling of epidermal growth factor receptor and platelet-derived growth factor receptor β, as well as to inhibit cell proliferation and angiogenesis. Our results suggest that a suitable small-molecule TCPTP activator could be utilized in the development of novel anti-cancer drugs.

Supporting Solution Business with an Integrated Enterprise System

Some of the world’s leading companies now compete by providing integrated solutions to identify and solve each customer’s business problem by providing services to design, integrate, operate and finance a product or system during its life cycle. At the same time, because of the requirements of new global economy, companies are implementing new integrated ERP systems. The objective of this thesis was to define how solution offering can be implemented in the integrated ERP system so that it is possible to sell, deliver and maintain solution offering with the new enterprise applications. The research was conducted as a qualitative case study research consisting of literature review, theme-interviews and an analysis phase. For a start this study introduces new insight for combining solution business, offering modeling and modern ERP system theories. The results of this research illustrate the limitations of an integrated ERP system to support solution business and show the need to develop a commercial product model in order to improve the combination of solution offering and IT systems.

Kumppanuustoiminnan kehittäminen projektien alihankintavalmistuksessa

Heinolan Sahakoneet Oy on tunnettu maailmanlaajuisesti osaavana ja luotettavana sahalaitosratkaisutoimittajana. Yrityksen tuotelinjaan kuuluvat myos hakkurit, kiinteat sivutuotehakkurit, seka mobiiiihakkurit jotka ovat kasvattaneet menekkiaan bioenergian kayton yleistyessa. Toimitettavat sahalaitosprojektit ovat vaativia ja asiakaslahtbisia toimitusprojekteja, joten mybs alihankintavalmistuksen yhteistyokumppaneilta vaaditaan vahvaa sitoutumista projektien onnistumiseksi. Usein eri yritysten valinen alihankintatoiminta missa tahansa tuoteymparistossa on suurienkin jarjestelmatoimittajien kanssa perustunut pelkastaan tilaus toimituslasku periaatteeseen, jossa molemmat osapuolet toimivat lahes itsenaisesti, jakamatta tietoa valttamatonta enempaa toisilleen. Joissakin tapauksissa paahankkijan ja alihankkijan valinen toimitussuhde on kehittynyt osapuolten erikseen tavoittelematta todellisen kumppanuustoiminnan elementteja sisaltavaksi yhteistyoksi. Tasta ei valttamatta ole pitka matka todelliseen kumppanuustoimintaan, joka parhaimmillaan mahdollistaa turvallisen tuotantokapasiteetin kasvattamisen ilman suuria ongelmia toimitusketjussa. Diplomityossa kasitellaan Heinolan Sahakoneet Oy:n toimitusprojektien toimitusketjua sahalaitosratkaisujen alihankintapositioiden ostamisen, kumppanuus toiminnan kehittamisen, seka sen yllapitamisen nakokulmasta. Tyo tarkastelee mita varmistustoimenpiteita tulee tehda kumppanin kanssa toimitusketjun eri vaiheissa, jotta mahdolliset ongelmat eivat kasaantuisi toimitusajankohdan viime hetkille. Usein toimitusketjussa ilmenneet vaikeudet saattavat vaikuttaa erittain vahapatoisilta, eivatka useimmiten edes tule esille mm. huonosta tiedonkulusta johtuen, mutta voivat vaikuttaa merkittavasti lopputulokseen. Kumppanuustoimintaa, seka erityisesti tiedonkulkua kehittamalla varmistetaan tuloksellisemmat ja vahemman ongelmia sisaitavat toimitusprojektit

Treatment of oily wastewater by ultrafiltration: The effect of different operating and solution conditions

In many industries, such as petroleum production, and the petrochemical, metal, food and cosmetics industries, wastewaters containing an emulsion of oil in water are often produced. The emulsions consist of water (up to 90%), oils (mineral, animal, vegetable and synthetic), surfactants and other contaminates. In view of its toxic nature and its deleterious effects on the surrounding environment (soil, water) such wastewater needs to be treated before release into natural water ways. Membrane-based processes have successfully been applied in industrial applications and are considered as possible candidates for the treatment of oily wastewaters. Easy operation, lower cost, and in some cases, the ability to reduce contaminants below existing pollution limits are the main advantages of these systems. The main drawback of membranes is flux decline due tofouling and concentration polarisation. The complexity of oil-containing systems demands complementary studies on issues related to the mitigation of fouling and concentration polarisation in membranebased ultrafiltration. In this thesis the effect of different operating conditions (factors) on ultrafiltration of oily water is studied. Important factors are normally correlated and, therefore, their effect should be studied simultaneously. This work uses a novel approach to study different operating conditions, like pressure, flow velocity, and temperature, and solution properties, like oil concentration (cutting oil, diesel, kerosene), pH, and salt concentration (CaCl2 and NaCl)) in the ultrafiltration of oily water, simultaneously and in a systematic way using an experimental design approach. A hypothesis is developed to describe the interaction between the oil drops, salt and the membrane surface. The optimum conditions for ultrafiltration and the contribution of each factor in the ultrafiltration of oily water are evaluated. It is found that the effect on permeate flux of the various factors studied strongly depended on the type of oil, the type of membrane and the amount of salts. The thesis demonstrates that a system containing oil is very complex, and that fouling and flux decline can be observed even at very low pressures. This means that only the weak form of the critical flux exists for such systems. The cleaning of the fouled membranes and the influence of different parameters (flow velocity, temperature, time, pressure, and chemical concentration (SDS, NaOH)) were evaluated in this study. It was observed that fouling, and consequently cleaning, behaved differently for the studied membranes. Of the membranes studied, the membrane with the lowest propensity for fouling and the most easily cleaned was the regenerated cellulose membrane (C100H). In order to get more information about the interaction between the membrane and the components of the emulsion, a streaming potential study was performed on the membrane. The experiments were carried out at different pH and oil concentration. It was seen that oily water changed the surface charge of the membrane significantly. The surface charge and the streaming potential during different stages of filtration were measured and analysed being a new method for fouling of oil in this thesis. The surface charge varied in different stages of filtration. It was found that the surface charge of a cleaned membrane was not the same as initially; however, the permeability was equal to that of a virgin membrane. The effect of filtration mode was studied by performing the filtration in both cross-flow and deadend mode. The effect of salt on performance was considered in both studies. It was found that salt decreased the permeate flux even at low concentration. To test the effect of hydrophilicity change, the commercial membranes used in this thesis were modified by grafting (PNIPAAm) on their surfaces. A new technique (corona treatment) was used for this modification. The effect of modification on permeate flux and retention was evaluated. The modified membranes changed their pore size around 33oC resulting in different retention and permeability. The obtained results in this thesis can be applied to optimise the operation of a membrane plant under normal or shock conditions or to modify the process such that it becomes more efficient or effective.

Puolustusteollisuusalan yrityksen strategisen verkoston hallinta ja tuloksellisuus vastakauppatoiminnan näkökulmasta

Valtiot soveltavat yleisesti puolustusvälinehankintojensa yhteydessä vastakauppamenettelyä, jota kutsutaan offsetiksi. Tämän laadullisen tapaustutkimuksen tavoitteena on selvittää minkälaista verkottumista suora offset edellyttää myyjäyritykseltä ja mitä vaikutuksia verkottumisella on myyjäyritykseen. Offsetvaatimusten ja paikallisyhteistyön vuoksi tapahtuvalla verkottumisella on monia vaikutuksia myyjäyritykseen, joista pääosan voidaan sanoa olevan liiketaloudellisessa mielessä negatiivisia. Huomioitavaa kuitenkin on, että ilman offsetia ei voida voittaa hankkeita ja näin generoida liiketoimintaa. Suoran offsetin verkostoituminen perustuu ratkaisuliiketoiminnan eli arvopajan kautta tuotettuun lisäarvoon loppuasiakkaalle. Tällaista verkostotoimintaa harjoittavaa yritystä voidaan kutsua asiakaskeskeisen verkoston ansaitsijaksi joka kasvattaa ansaintaansa tuottamansa korkeamman lisäarvon kautta. Offsetin luonteesta johtuen erilaisten mittausjärjestelmien rakentaminen voi nousta haasteeksi.

Data Consistency by a Metadata Management Solution

This thesis consists of three main theoretical themes: quality of data, success of information systems, and metadata in data warehousing. Loosely defined, metadata is descriptive data about data, and, in this thesis, master data means reference data about customers, products etc. The objective of the thesis is to contribute to an implementation of a metadata management solution for an industrial enterprise. The metadata system incorporates a repository, integration, delivery and access tools, as well as semantic rules and procedures for master data maintenance. It targets to improve maintenance processes and quality of hierarchical master data in the case company’s informational systems. That should bring benefits to whole organization in improved information quality, especially in cross-system data consistency, and in more efficient and effective data management processes. As the result of this thesis, the requirements for the metadata management solution in case were compiled, and the success of the new information system and the implementation project was evaluated.

Parallel-Operating Three-Phase Voltage Source Inverters – Circulating CurrentModeling, Analysis and Mitigation

The maximum realizable power throughput of power electronic converters may be limited or constrained by technical or economical considerations. One solution to this problemis to connect several power converter units in parallel. The parallel connection can be used to increase the current carrying capacity of the overall system beyond the ratings of individual power converter units. Thus, it is possible to use several lower-power converter units, produced in large quantities, as building blocks to construct high-power converters in a modular manner. High-power converters realized by using parallel connection are needed for example in multimegawatt wind power generation systems. Parallel connection of power converter units is also required in emerging applications such as photovoltaic and fuel cell power conversion. The parallel operation of power converter units is not, however, problem free. This is because parallel-operating units are subject to overcurrent stresses, which are caused by unequal load current sharing or currents that flow between the units. Commonly, the term ’circulatingcurrent’ is used to describe both the unequal load current sharing and the currents flowing between the units. Circulating currents, again, are caused by component tolerances and asynchronous operation of the parallel units. Parallel-operating units are also subject to stresses caused by unequal thermal stress distribution. Both of these problemscan, nevertheless, be handled with a proper circulating current control. To design an effective circulating current control system, we need information about circulating current dynamics. The dynamics of the circulating currents can be investigated by developing appropriate mathematical models. In this dissertation, circulating current models aredeveloped for two different types of parallel two-level three-phase inverter configurations. Themodels, which are developed for an arbitrary number of parallel units, provide a framework for analyzing circulating current generation mechanisms and developing circulating current control systems. In addition to developing circulating current models, modulation of parallel inverters is considered. It is illustrated that depending on the parallel inverter configuration and the modulation method applied, common-mode circulating currents may be excited as a consequence of the differential-mode circulating current control. To prevent the common-mode circulating currents that are caused by the modulation, a dual modulator method is introduced. The dual modulator basically consists of two independently operating modulators, the outputs of which eventually constitute the switching commands of the inverter. The two independently operating modulators are referred to as primary and secondary modulators. In its intended usage, the same voltage vector is fed to the primary modulators of each parallel unit, and the inputs of the secondary modulators are obtained from the circulating current controllers. To ensure that voltage commands obtained from the circulating current controllers are realizable, it must be guaranteed that the inverter is not driven into saturation by the primary modulator. The inverter saturation can be prevented by limiting the inputs of the primary and secondary modulators. Because of this, also a limitation algorithm is proposed. The operation of both the proposed dual modulator and the limitation algorithm is verified experimentally.

Estimation of existing cable systems in generator-busbar unit and choice the optimal solution for its modernization

The aim of this master’s thesis is to develop an algorithm to calculate the cable network for heat and power station CHGRES. This algorithm includes important aspect which has an influence on the cable network reliability. Moreover, according to developed algorithm, the optimal solution for modernization cable system from economical and technical point of view was obtained. The conditions of existing cable lines show that replacement is necessary. Otherwise, the fault situation would happen. In this case company would loss not only money but also its prestige. As a solution, XLPE single core cables are more profitable than other types of cable considered in this work. Moreover, it is presented the dependence of value of short circuit current on number of 10/110 kV transformers connected in parallel between main grid and considered 10 kV busbar and how it affects on final decision. Furthermore, the losses of company in power (capacity) market due to fault situation are presented. These losses are commensurable with investment to replace existing cable system.

Solution marketing characteristics and practices

The first objective of this master's thesis is to find out how the concepts solution and solution marketing are defined in the literature. In order to do so, solution marketing literature is reviewed widely. Another target is to identify the characteristics of solution marketing and to explain how solution marketing can be carried out. The final objective is to determine how well the described solution marketing practices are executed in the target company, and this will be studied with a survey. A solution can be described as a co-created and customized combination of products and services. Solution marketing aims at developing and anticipating customer's business needs and it involves close collaboration between customer and supplier. Solution marketing communication is targeted to a specific audience. It entails deep customer intimacy and is focused on understanding customer's business problem. Solution marketing also requires close collaboration between sales and marketing as well as customer focused mindset. Solution marketing can be executed by promoting thought leadership, presenting solution offering, creating close customer relationships and treating customers as individuals. Solution provider's whole organization must engage customer focus.

The concept of solution: Industry’s insights compared to theoretical views

Many manufacturing companies have started to offer complete solutions to their customers’ unique needs due to toughening competition and customer demand. Discourse on this kind of solution business is still developing, hence, there is not an established definition for the concept of solution. The aim of the study is to profoundly identify the concept of solution and to understand how the industry’s current views differ from the theoretical concepts. The describing dimensions are identified from selected 13 theoretical notions, and from responses, that the employees of five different companies have given. The 32 interview transcripts are analyzed with thematic analysis and qualitative content analysis. According to the findings, the concept of solution is characterized by integration, customization, risk-sharing, value co-creation, long-term orientation, and desired outcomes. The industry’s insights differ in terms of them all. The results illustrate, that a solution is a bundle, and the whole solution is customized on some level for a client. A solution supplier needs to be customer-focused, in which value co-creation is only a part. The solution solves the customer’s problem, and improves both the customer’s, and the supplier’s business. Neither long-term focus nor risks-sharing were directly employed to characterize the concept of solution. Differences are mainly due to the different approaches to the definitions and inexperience of the companies.

Evaluating the Advantages of Implementing a CRM solution

CRM-järjestelmän avulla pyritään yleisesti tehostamaan liiketoimintaprosesseja. Yrityksestä, kuin myös toimialasta riippuen hyödyt sekä tavoitteet vaihtelevat jonkin verran. Usein CRM-järjestelmän avulla saavutettavien hyötyjen mittaaminen ja arviointi organisaatiossa koetaan hankalaksi ja täten todellinen hyötyjen arviointi jää suppeaksi. Tämän tutkimuksen tavoitteena oli kartoittaa etuja, joita CRM-järjestelmän käyttöönotto on todellisuudessa tuonut yrityksille. Tutkimus kulminoituu laskentamalliin, jonka avulla CRM käytön hyödyt konvertoidaan konkreettiseksi rahasummaksi. Tutkimuksessa pyritään vastaamaan seuraaviin tutkimuskysymyksiin: 1. Kun yritys suunnitteli CRM-sovelluksen käyttöönottoa, mitkä olivat järjestelmälle asetetut tavoitteet? 2. Onko yritys saavuttanut CRM-järjestelmälle asetetut tavoitteet? 3. Onko yritys saavuttanut odottamattomia hyötyjä CRM-järjestelmän käytön avulla? 4. Mitkä ovat CRM-järjestelmän tärkeimmät kehityskohteet käyttökokemusten perusteella? Tutkimus perustuu CRM-kirjallisuuden avulla luotuun teoriaviitekehykseen. Teoriaviitekehyksen pohjalta luotiin ideaalimalli ja mallin pohjalta web-survey -kysely. Kyselyn tulosten perusteella toteutettiin haastatteluja, joilla pyrittiin saamaan tutkimustuloksiin syvyyttä.

Determination of sugars and organic acids in pulp samples by capillary electrophoresis with UV detection

This MSc work was done in the project of BIOMECON financed by Tekes. The prime target of the research was, to develop methods for separation and determination of carbohydrates (sugars), sugar acids and alcohols, and some other organic acids in hydrolyzed pulp samples by capillary electrophoresis (CE) using UV detection. Aspen, spruce, and birch pulps are commonly used for production of papers in Finland. Feedstock components in pulp predominantly consist of carbohydrates, organic acids, lignin, extractives, and proteins. Here in this study, pulps have been hydrolyzed in analytical chemistry laboratories of UPM Company and Lappeenranta University in order to convert them into sugars, acids, alcohols, and organic acids. Foremost objective of this study was to quantify and identify the main and by-products in the pulp samples. For the method development and optimization, increased precision in capillary electrophoresis was accomplished by calculating calibration data of 16 analytes such as D-(-)-fructose, D(+)-xylose, D(+)-mannose, D(+)-cellobiose, D-(+)-glucose, D-(+)-raffinose, D(-)-mannitol, sorbitol, rhamnose, sucrose, xylitol, galactose, maltose, arabinose, ribose, and, α-lactose monohydratesugars and 16 organic acids such as D-glucuronic, oxalic, acetic, propionic, formic, glycolic, malonic, maleic, citric, L-glutamic, tartaric, succinic, adipic, ascorbic, galacturonic, and glyoxylic acid. In carbohydrate and polyalcohol analyses, the experiments with CE coupled to direct UV detection and positive separation polarity was performed in 36 mM disodium hydrogen phosphate electrolyte solution. For acid analyses, CE coupled indirect UV detection, using negative polarity, and electrolyte solution made of 2,3 pyridinedicarboxylic acid, Ca2+ salt, Mg2+ salts, and myristyltrimethylammonium hydroxide in water was used. Under optimized conditions, limits of detection, relative standard deviations and correlation coefficients of each compound were measured. The optimized conditions were used for the identification and quantification of carbohydrates and acids produced by hydrolyses of pulp. The concentrations of the analytes varied between 1 mg – 0.138 g in liter hydrolysate.

The introduction of Mormonism to Finnish society, 1840-1900

This study examines the place of The Church of Jesus Christ of Latter-day Saints (commonly known as the Mormon church) in the Russian Grand Duchy of Finland between the years 1840 and 1900. Attention is put on both the internal workings of the movement and the reactions of society. Theoretical insight is gained through the concepts of social construction and religious economies. Mormon image formation in Finland began by 1840 through newspaper reports on activities abroad and through essays on the faith’s history and doctrine. Mormons are mentioned almost 3,500 times in Finnish newspapers between 1840 and 1900, and at least twelve unique book titles sold in the country were explicitly devoted to discussing Mormonism. Most of the publicity was derived from foreign sources. Discourse analysis of this textual corpus shows a hegemonic discourse that combined themes such as fraud, deception, and theocracy in explaining the Mormon movement. Accompanied by plural marriage, these themes contributed to the construction of a strongly negative image of Mormonism already before the first missionaries arrived in 1875. In a society with a stringently regulated religious economy, this image contributed to a high level of resistance by civil authorities and Lutheran clergy. Twenty-five Mormon missionaries worked in Finland between 1875 and 1900, with a concentrated effort taking place between 1875 and 1889. At least 78 persons converted, mostly in the coastal areas among the Swedish-speaking minority population. Nine percent emigrated to Utah, 36% were excommunicated, others fell into oblivion, while still others clung to their new faith. The work was led from Sweden, with no stable church organization emerging among the isolated pockets of converts. Mormonism’s presence was thus characterized by private or small-group religiosity rather than a vibrant movement. The lack of religious community, conversation, and secondary socialization eventually caused the nineteenth-century manifestation of Finnish Mormonism to die out. Only one group of converts was perpetuated past World War II, after which large-scale proselytizing began.

Classification, comorbidity, heredity, and risk factors of female sexual dysfunctions

Female sexual dysfunctions, including desire, arousal, orgasm and pain problems, have been shown to be highly prevalent among women around the world. The etiology of these dysfunctions is unclear but associations with health, age, psychological problems, and relationship factors have been identified. Genetic effects explain individual variation in orgasm function to some extent but until now quantitative behavior genetic analyses have not been applied to other sexual functions. In addition, behavior genetics can be applied to exploring the cause of any observed comorbidity between the dysfunctions. Discovering more about the etiology of the dysfunctions may further improve the classification systems which are currently under intense debate. The aims of the present thesis were to evaluate the psychometric properties of a Finnish-language version of a commonly used questionnaire for measuring female sexual function, the Female Sexual Function Index (FSFI), in order to investigate prevalence, comorbidity, and classification, and to explore the balance of genetic and environmental factors in the etiology as well as the associations of a number of biopsychosocial factors with female sexual functions. Female sexual functions were studied through survey methods in a population based sample of Finnish twins and their female siblings. There were two waves of data collection. The first data collection targeted 5,000 female twins aged 33–43 years and the second 7,680 female twins aged 18–33 and their over 18–year-old female siblings (n = 3,983). There was no overlap between the data collections. The combined overall response rate for both data collections was 53% (n = 8,868), with a better response rate in the second (57%) compared to the first (45%). In order to measure female sexual function, the FSFI was used. It includes 19 items which measure female sexual function during the previous four weeks in six subdomains; desire, subjective arousal, lubrication, orgasm, sexual satisfaction, and pain. In line with earlier research in clinical populations, a six factor solution of the Finnish-language version of the FSFI received supported. The internal consistencies of the scales were good to excellent. Some questions about how to avoid overestimating the prevalence of extreme dysfunctions due to women being allocated the score of zero if they had had no sexual activity during the preceding four weeks were raised. The prevalence of female sexual dysfunctions per se ranged from 11% for lubrication dysfunction to 55% for desire dysfunction. The prevalence rates for sexual dysfunction with concomitant sexual distress, in other words, sexual disorders were notably lower ranging from 7% for lubrication disorder to 23% for desire disorder. The comorbidity between the dysfunctions was substantial most notably between arousal and lubrication dysfunction even if these two dysfunctions showed distinct patterns of associations with the other dysfunctions. Genetic influences on individual variation in the six subdomains of FSFI were modest but significant ranging from 3–11% for additive genetic effects and 5–18% for nonadditive genetic effects. The rest of the variation in sexual functions was explained by nonshared environmental influences. A correlated factor model, including additive and nonadditive genetic effects and nonshared environmental effects had the best fit. All in all, every correlation between the genetic factors was significant except between lubrication and pain. All correlations between the nonshared environment factors were significant showing that there is a substantial overlap in genetic and nonshared environmental influences between the dysfunctions. In general, psychological problems, poor satisfaction with the relationship, sexual distress, and poor partner compatibility were associated with more sexual dysfunctions. Age was confounded with relationship length but had over and above relationship length a negative effect on desire and sexual satisfaction and a positive effect on orgasm and pain functions. Alcohol consumption in general was associated with better desire, arousal, lubrication, and orgasm function. Women pregnant with their first child had fewer pain problems than nulliparous nonpregnant women. Multiparous pregnant women had more orgasm problems compared to multiparous nonpregnant women. Having children was associated with less orgasm and pain problems. The conclusions were that desire, subjective arousal, lubrication, orgasm, sexual satisfaction, and pain are separate entities that have distinct associations with a number of different biopsychosocial factors. However, there is also considerable comorbidity between the dysfunctions which are explained by overlap in additive genetic, nonadditive genetic and nonshared environmental influences. Sexual dysfunctions are highly prevalent and are not always associated with sexual distress and this relationship might be moderated by a good relationship and compatibility with partner. Regarding classification, the results supports separate diagnoses for subjective arousal and genital arousal as well as the inclusion of pain under sexual dysfunctions.