Automated Purchase to Pay Process Value Modeling and Comparative Process Speeds

The importance of efficient supply chain management has increased due to globalization and the blurring of organizational boundaries. Various supply chain management technologies have been identified to drive organizational profitability and financial performance. Organizations have historically been concentrating heavily on the flow of goods and services, while less attention has been dedicated to the flow of money. While supply chains are becoming more transparent and automated, new opportunities for financial supply chain management have emerged through information technology solutions and comprehensive financial supply chain management strategies. This research concentrates on the end part of the purchasing process which is the handling of invoices. Efficient invoice processing can have an impact on organizations working capital management and thus provide companies with better readiness to face the challenges related to cash management. Leveraging a process mining solution the aim of this research was to examine the automated invoice handling process of four different organizations. The invoice data was collected from each organizations invoice processing system. The sample included all the invoices organizations had processed during the year 2012. The main objective was to find out whether e-invoices are faster to process in an automated invoice processing solution than scanned invoices (post entry into invoice processing solution). Other objectives included looking into the longest lead times between process steps and the impact of manual process steps on cycle time. Processing of invoices from maverick purchases was also examined. Based on the results of the research and previous literature on the subject, suggestions for improving the process were proposed. The results of the research indicate that scanned invoices were processed faster than e-invoices. This is mostly due to the more complex processing of e-invoices. It should be noted however that the manual tasks related to turning a paper invoice into electronic format through scanning are ignored in this research. The transitions with the longest lead times in the invoice handling process included both pre-automated steps as well as manual steps performed by humans. When the most common manual steps were examined in more detail, it was clear that these steps had a prolonging impact on the process. Regarding invoices from maverick purchases the evidence shows that these invoices were slower to process than invoices from purchases conducted through e-procurement systems and from preferred suppliers. Suggestions on how to improve the process included: increasing invoice matching, reducing of manual steps and leveraging of different value added services such as invoice validation service, mobile solutions and supply chain financing services. For companies that have already reaped all the process efficiencies the next step is to engage in collaborative financial supply chain management strategies that can benefit the whole supply chain.

Tertiary Treatment and Re-use of Kraft Pulp Mill Effluent

The efficient use of materials and natural recourses, for ecological and economic reasons, has become more and more important in all industries. In the forest industries this means higher levels of closure in the material circulations of the mills. One possibility to reduce wastewater discharge is to re-use part of the 2nd clarifier effluent as process water. The main target of this thesis was to evaluate the technical suitability of several mechanical and chemical tertiary treatment methods for water re-use. Some of the tested methods seemed to have high potential for the removal of some specific constituents from the wastewater. Tertiary treatment is needed because higher levels of closure may cause problems with increasing amounts of non-process elements in different points of kraft pulp process. The aspect of sustainable development was taken into account by evaluating positive and negative environmental effects of the treatment processes. Environmental benefits can be gained by using some of the tertiary treatment methods tested. These methods should still be researched more for system optimization.

Opportunistisen sopimusrikkomuksen ongelmasta, erityisesti Suomen vahingonkorvaus- ja rikoslainsäädännön näkökulmasta tarkasteltuna. Law and Economics -näkökulma.

Tämä pro gradu -tutkielma käsittelee opportunistisen sopimusrikkomuksen ongelmaa erityisesti Suomen vahingonkorvaus- ja rikoslainsäädännön näkökulmasta tarkasteltuna. Tutkielman lähestymistapa on oikeustaloustieteellinen (engl. Law and Economics). Opportunistisella sopimusrikkomuksella tarkoitetaan toimintaa, jossa sopimusosapuoli rikkoo sopimuksen tarkoituksellisesti, pyrkimyksenään tällä toiminnalla saavuttaa enemmän hyötyä kuin sopimuksessa pysymällä. Opportunistinen sopimusrikkomus on mahdollista toteuttaa tilanteessa, jossa sopimusasetelma itsessään antaa mahdollisuuden enemmän hyödyn saavuttamiseen rikkomus toteuttamalla kuin sopimus asianmukaisesti täyttämällä. Suomalaisessa vahingonkorvausjärjestelmässä sovelletaan sopimusrikkomusten osalla positiivisen sopimusedun mukaista vahingonkorvausta, joka hyvittää rikotulle osapuolelle sopimussuhteeseen ryhtymisestä syntyneet kustannukset sekä sopimusrikkomuksen johdosta saamatta jääneen tuoton. Positiivisen sopimusedun soveltaminen ei kuitenkaan ole opportunistisen sopimusrikkomuksen ehkäisemiseksi riittävää, sillä opportunistisesti toimiva sopimusosapuoli voi jäädä rikkomuksensa johdosta voitolle vielä sen jälkeenkin, kun kärsineelle osapuolelle on jo positiivista sopimusetua noudattaen korvattu sopimussuhteessa syntyneet kustannukset sekä rikkomuksen johdosta saamatta jäänyt tuotto. Keskeinen ongelma koskien opportunististen sopimusrikkomustilanteiden syntyä onkin juuri vallitsevan sääntelyn liiallinen keskittyminen rikotun osapuolen kärsimän vahingon kompensoimiseen, ei rikkomustilanteiden synnyn ennaltaehkäisemiseen. Suomen vahingonkorvausjärjestelmää tulisi kehittää suuntaan, jossa järjestelmä paremmin ennaltaehkäisisi opportunististen sopimusrikkomustilanteiden syntyä. Common law -oikeusjärjestelmässä käytössä olevan disgorgement principle -suuntaisen ajattelun, jossa korvauksen perustana toimisi rikkomuksella saatu hyöty kärsityn vahingon sijaan, omaksuminen olisi yksi mahdollinen kehityskulku. Olennaista olisi kuitenkin se, että järjestelmää kehitettäisiin suuntaan, jossa rikkomus ei enää voisi tulla rikkojalle kannattavaksi. Opportunistisen toiminnan kannustimet tulisi lainsäädäntöä tarkistamalla poistaa. Tällä olisi sekä sopimusinstituutiota turvaavaa että vaihdantaa edistävää vaikutusta.

Liminal Monster and the Conflict Between Human and Machine: The Shrike in Dan Simmons’ Hyperion and The Fall of Hyperion

Tarkastelen tutkielmassani Dan Simmonsin kaksiosaista tieteisfiktioteosta, joka koostuu romaaneista Hyperion ja The Fall of Hyperion. Keskityn teoksissa esiintyvään Shrike-hirviöön, joka edustaa ihmiskunnan pelkäämää potentiaalista konfliktia ihmisten ja koneiden välillä. Pelko ja konflikti ovat keskeisiä teemoja paitsi tieteisfiktiossa, myös hirviöteoksissa yleensä, ja näiden kahden käyttö samassa kertomuksessa luo otolliset edellytykset nyky-yhteiskunnan ahdistusten kuvaamiseen. Hirviöitä ja tieteisfiktiota on tätä nykyä tutkittu melko laajalti, mutta Shrike on aiemmin jäänyt vähälle huomiolle. Lähtökohtaisen teoreettisen viitekehyksen tutkimukselleni ovat luoneet Jeffrey Cohenin Monster Theory: Reading Culture, Stephen Asman On Monsters: An Unnatural History of Our Worst Fears sekä Holly Lynn Baumgartnerin ja Roger Davisin At the Interface: Hosting the Monster. Teoksista kokoamani hirviöteorian kautta tarkastelen sitä, miten Shriken puoliksi orgaaninen ja puoliksi keinotekoinen keho heijastaa niitä romaaneissa esiintyviä osa-alueita, joista tulevaisuudenpelko ja ihmisten ja koneiden väliseen konfliktin uhka koostuu. Koska Shrike on puoliksi orgaaninen ja puoliksi keinotekoinen, se on näiden ominaisuuksien kynnyksellä; tässä risteytyneessä kehossa yhdistyvät molemmat ääripäät, jolloin tämä keho myös symboloi osapuolten välistä konfliktia. Konfliktin lisäksi Shrike ilmentää niitä vastakkaisuuksia, joista ihmisten ja koneiden välisen konfliktin pelko rakentuu: itseyttä ja toiseutta, houkuttelevuutta ja luotaantyöntävyyttä, menneisyyttä ja tulevaisuutta sekä utopiaa ja dystopiaa.

Methods of genetic diversity creation and functional display for directed evolution experiments

Protein engineering aims to improve the properties of enzymes and affinity reagents by genetic changes. Typical engineered properties are affinity, specificity, stability, expression, and solubility. Because proteins are complex biomolecules, the effects of specific genetic changes are seldom predictable. Consequently, a popular strategy in protein engineering is to create a library of genetic variants of the target molecule, and render the population in a selection process to sort the variants by the desired property. This technique, called directed evolution, is a central tool for trimming protein-based products used in a wide range of applications from laundry detergents to anti-cancer drugs. New methods are continuously needed to generate larger gene repertoires and compatible selection platforms to shorten the development timeline for new biochemicals. In the first study of this thesis, primer extension mutagenesis was revisited to establish higher quality gene variant libraries in Escherichia coli cells. In the second study, recombination was explored as a method to expand the number of screenable enzyme variants. A selection platform was developed to improve antigen binding fragment (Fab) display on filamentous phages in the third article and, in the fourth study, novel design concepts were tested by two differentially randomized recombinant antibody libraries. Finally, in the last study, the performance of the same antibody repertoire was compared in phage display selections as a genetic fusion to different phage capsid proteins and in different antibody formats, Fab vs. single chain variable fragment (ScFv), in order to find out the most suitable display platform for the library at hand. As a result of the studies, a novel gene library construction method, termed selective rolling circle amplification (sRCA), was developed. The method increases mutagenesis frequency close to 100% in the final library and the number of transformants over 100-fold compared to traditional primer extension mutagenesis. In the second study, Cre/loxP recombination was found to be an appropriate tool to resolve the DNA concatemer resulting from error-prone RCA (epRCA) mutagenesis into monomeric circular DNA units for higher efficiency transformation into E. coli. Library selections against antigens of various size in the fourth study demonstrated that diversity placed closer to the antigen binding site of antibodies supports generation of antibodies against haptens and peptides, whereas diversity at more peripheral locations is better suited for targeting proteins. The conclusion from a comparison of the display formats was that truncated capsid protein three (p3Δ) of filamentous phage was superior to the full-length p3 and protein nine (p9) in obtaining a high number of uniquely specific clones. Especially for digoxigenin, a difficult hapten target, the antibody repertoire as ScFv-p3Δ provided the clones with the highest affinity for binding. This thesis on the construction, design, and selection of gene variant libraries contributes to the practical know-how in directed evolution and contains useful information for scientists in the field to support their undertakings.

Five Baltic Ports Togehter: Forecasts, Trends and Recommendations

The ports of Stockholm, Tallinn, Helsinki, Naantali and Turku play key roles in making the Central Baltic region accessible. Effective, competitive, eco-friendly and safe port procedures and solutions for the transportation of goods are of major importance for trade in the Baltic Sea region. This report presents the most essential results and recommendations of the PENTA project, which focused on how ports could better comprehend and face current and future challenges facing carriage of goods by sea. Each of the four work packages (WPs) of the PENTA project analysed the changes from a different perspective. WP2 focused on traffic flows between the PENTA ports. Its main emphasis was on the ports, shipowners, and logistics companies that are the key parties in freight transport and on the changes affecting the economy of those ports. In WP3 noise as an environmental challenge for ports was investigated and the analysis also shed light on the relationship between the port and the city. In WP4 procedures related to safety, security and administrative procedures were researched. The main emphasis was on identifying the requirements for the harmonisation of those procedures. Collaboration is highlighted throughout this report. In order to prepare for the future, it was found that ports need to respond to growing competition, increasing costs and shifts in customer demand by strengthening their existing partnerships with other actors in the maritime cluster. Cargo and passenger transport are the main sources of income for most ports. Cargo traffic between the PENTA ports is expected to grow steadily in the future and the outlook for passenger traffic is positive. However, to prepare for the future, ports should not only secure the core activities which generate revenue but also seek alternative ways to make profit. In order to gain more transit traffic, it is suggested that ports conduct a more thorough study of the future requirements for doing business with Russia. The investigation of noise at ports revealed two specific dilemmas that ports cannot solve alone. Firstly, the noise made by vessels and, secondly, the relationship between the port and the surrounding city. Vessels are the most important single noise source in the PENTA ports and also one of the hardest noise sources to handle. Nevertheless, port authorities in Finland and Sweden are held responsible for all noise in the port area, including noise produced by vessels, which is noise the port authority can only influence indirectly. Building housing by waterfront areas close to ports may also initiate disagreements because inhabitants may want quiet areas, whereas port activities always produce some noise from their traffic. The qualitative aspects of the noise question, cooperating with the stakeholders and the communicating of issues related to noise are just as important. We propose that ports should follow the logic of continuous improvement in their noise management. The administrative barriers discussed in this report are mainly caused by differences in international and national legislation, variations in the customs procedures of each country, the incompatibility of the IT systems used in maritime transport, noncompliance with regulations regarding dangerous goods, and difficulties in applying Schengen regulations to vessels from non-EU countries. Improving the situation is out of the hands of the ports to do alone and requires joint action on a variety of levels, including the EU, national authorities and across administrative borders.

Capillary electrophoresis for monitoring of carboxylic, phenolic and amino acids in bioprocesses

Bioprocess technology is a multidisciplinary industry that combines knowledge of biology and chemistry with process engineering. It is a growing industry because its applications have an important role in the food, pharmaceutical, diagnostics and chemical industries. In addition, the current pressure to decrease our dependence on fossil fuels motivates new, innovative research in the replacement of petrochemical products. Bioprocesses are processes that utilize cells and/or their components in the production of desired products. Bioprocesses are already used to produce fuels and chemicals, especially ethanol and building-block chemicals such as carboxylic acids. In order to enable more efficient, sustainable and economically feasible bioprocesses, the raw materials must be cheap and the bioprocesses must be operated at optimal conditions. It is essential to measure different parameters that provide information about the process conditions and the main critical process parameters including cell density, substrate concentrations and products. In addition to offline analysis methods, online monitoring tools are becoming increasingly important in the optimization of bioprocesses. Capillary electrophoresis (CE) is a versatile analysis technique with no limitations concerning polar solvents, analytes or samples. Its resolution and efficiency are high in optimized methods creating a great potential for rapid detection and quantification. This work demonstrates the potential and possibilities of CE as a versatile bioprocess monitoring tool. As a part of this study a commercial CE device was modified for use as an online analysis tool for automated monitoring. The work describes three offline CE analysis methods for the determination of carboxylic, phenolic and amino acids that are present in bioprocesses, and an online CE analysis method for the monitoring of carboxylic acid production during bioprocesses. The detection methods were indirect and direct UV, and laser-induced frescence. The results of this work can be used for the optimization of bioprocess conditions, for the development of more robust and tolerant microorganisms, and to study the dynamics of bioprocesses.

Use of fiber-reinforced composite framework and thermochromic pigment in maxillofacial prostheses

The purpose of this investigation was to evaluate the possibility to enhance certain qualities of facial prostheses. Polymethyl methacrylate is still being used as base mate¬rial or clip carrier material, but it is hard and heavy, and debonding of the silicone from the acrylic base material is a frequent problem. This thesis aims to evaluate the use of fiber-reinforced composite (FRC) as framework material for maxillofacial silicone prostheses. FRC has been used as reinforcement in removable and fixed partial dentures since the 1990s. This material is lightweight and can be fabricated to compress the margins of the prosthesis slightly, to keep it tightly against the skin during jaw movements and facial expressions. Additionally, the use of a thermochromic pigment, colorless in room temperature and red in a cold environment, was studied in order to evaluate the possibility of using this color changing pigment in facial prostheses to mimic the color change of facial skin in cold weather. The tensile bond strength between pre-impregnated, unidirectional FRC and maxillofacial silicone elastomer was studied. Three different bonding agents or primers were compared. Bond strength was improved by one of the primers and by roughening the surface. The effect of a skin compressing glass fiber-reinforced composite framework on facial skin blood flow was studied by using a face mask, constructed with a compression pad corresponding to the outer margin of a glass fiber-reinforced framework beam of a facial prosthesis. The skin blood flow of ten healthy volunteers, aged 23-25 years, was measured during touch, light, and moderate compression of the skin, by using laser Doppler imaging technique. None of the compressions showed any marked effects on local skin blood flow. There were no significant differences between blood flow during compression and at baseline. Maxillofacial silicone elastomer was colored intrinsically with conventional color pigments: a control group containing only conventional pigments was compared to two test groups with 0.2 wt% and 0.6 wt% thermochromic pigment added. The color of the material was measured with a spectrophotometer in room temperature and after storage in a freezer. The color stability of the maxillofacial silicone elastomer colored with thermo¬chromic pigment was evaluated by artificial aging. The color dif¬ference of the L* (lightness) and a* values (redness), comparing color after the samples were stored at room temperature and in a freezer (-19°C), was statistically significant for both 0.2 wt% and 0.6 wt% thermo¬chromic pigment groups. The differences in the b* values (yellowness) were statistically significant for the 0.6 wt% group. Exposure to ultraviolet (UV) radiation led to visually noticeable and statistically signifi¬cant color changes (ΔE) in all color values in both test groups. The specimens containing thermochromic pigment were very sensitive to UV radiation. In conclusion, a framework of fiber-reinforced composite can successfully be bonded to maxillofacial silicone elastomer, and a framework beam, compressing the facial skin, did not remarkably alter the skin blood flow on healthy, young adults. The thermochromic pigment showed color change in maxillofacial silicone elastomer. However, artificial aging showed that it was too sensitive to UV radiation to be used, as such, in maxillofacial prostheses.

The Challenges and Opportunities of e-Commerce in Fashion Branding from an e-Trust and e-Loyalty Perspective

This thesis discovers the main challenges and opportunities that e-Commerce brings to the fashion industry and to the process of building brand trust and loyalty in particular. The field of e-Commerce is investigated and the findings, benefits and challenges, are implemented into companies’ branding strategies. Then, the effect of companies’ online branding actions on customers’ behaviour is studied. New perspectives and ideas are developed for fashion retailers to build trust online and increase the number of customers who continuously utilize brand’s products and services.

CTQ process flow development and the impact for cost of quality

Tämä työ tehtiin Kone Industrial Oy:lle Major Projects yksikköön, laatuosastolle. Kone Major Projects yksikkö keskittyy erikoisiin ja suuriin hissi- ja liukuporras projekteihin. Työn tavoitteena oli luoda harmonisoitu prosessi hissikomponenttien laaduntarkkailua varten sekä tarkastella ja vertailla kustannussäästöjä, jota tällä uudella prosessilla voidaan saavuttaa. Tavoitteena oli saavuttaa 80-prosentin kustannussäästöt laatukustannuksissa uuden laatuprosessin avulla. Työn taustana ja tutkimusongelmana ovat lisääntyneet erikoisprojektit ja niiden myötä lisääntynyt laaduntarkkailun tarve. Ongelmana laaduntarkkailussa voitiin pitää harmonisoidun ja selkeän prosessin puuttumista C-prosessikomponenttien valmistuksessa. Lisäksi kehitysprosessin aikana luotiin vanhojen työkalujen pohjalta keskeinen laaduntarkkailutyökalu, CTQ-työkalu. Työssä käsitellään ensin Konetta yhtiönä ja selvitetään Koneen keskeisimmät prosessit työn taustaksi. Teoria osuudessa käsitellään prosessin kehitykseen liittyviä teorioita sekä yleisiä laatukäsitteitä ja esitetään teorioita laadun asemasta nykypäivänä. Lopuksi käsitellään COQ eli laatukustannusten teoriaa ja esitellään teoria PAF-analyysille, jota käytetään työssä laatukustannusten vertailuun case esimerkin avulla. Työssä kuvataan CTQ prosessin luominen alusta loppuun ja case esimerkin avulla testataan uutta CTQ prosessia pilottihankkeessa. Tässä case esimerkissä projektin bracket eli johdekiinnitysklipsi tuotetaan uuden laatuprosessin avulla sekä tehdään kustannusvertailu saman projektin toisen bracketin kanssa, joka on tuotettu ennen uuden laatuprosessin implementoimista. Työn lopputuloksena CTQ prosessi saatiin luotua ja sitä pystyttiin testaamaan käytännössä case esimerkin avulla. Tulosten perusteella voidaan sanoa, että CTQ prosessin käyttö vähentää laatukustannuksia huomattavasti ja helpottaa laadunhallintaa C-prosessikomponenttien tuotannossa.

Viral marketing in a Finnish medium sized gaming company: discovering, analyzing and building an improved management process for viral marketing campaigns, case: Nitrogames

The goal of this thesis is to build a viral marketing management framework for a Finnish medium sized gaming company. This is achieved by first finding and building a theoretical five step management process framework based on literature, analyzing current model and giving recommendations for the case company to develop its own management process. In addition, viral marketing research is still in early stage resulting this study to propose its own take on the definition in the theory part. Empirical part is based on qualitative interviews, campaign material and secondary sources and is aimed to find out and analyze the case company’s current viral marketing state and to give recommendations to it. The final outcome of the study is a general, theoretical management framework for viral marketing campaigns and specified recommendations for the case company.

Victims’ status at international and hybrid criminal courts : victims’ status as witnesses, victim participants/civil parties and reparations claimants

Bestraffning av internationella brott vid internationella och hybrida straffrättsliga domstolar har traditionellt och huvudsakligen grundat sig på principen om retributiv (vedergällande) rättvisa och ackusatorisk process snarare än återuppbyggande rättvisa och en inkvisitorisk modell. Därav har brottsoffrens ställning vid dessa straffrättsliga domstolar begränsat sig till den som innehas av vittnen vid Tribunalen som behandlar brott som begåtts i det forna Jugoslavien (ICTY), Internationella krigsförbrytartribunalen för Rwanda (ICTR) och Specialdomstolen för Sierra Leone (SCSL). Internationella brottmålsdomstolen (ICC), å sin sida, har medfört en viktig förändring gällande brottsoffrens ställning i internationella straffrättsliga fora, vilket innebär att de från att ha betraktats endast i egenskap av vittnen nu även har en rätt att delta och lämna sina synpunkter (i egenskap av brottsofferdeltagare) samt kräva gottgörelse. Denna trend har fortsatt inom området för internationell straffrätt, vilket manifesterats vid hybridtribunaler som tillsatts efter ICC såsom Kambodjadomstolen (ECCC) vid vilken brottsoffer kan agera civilrättsliga parter och Specialdomstolen för Libanon (STL) där brottsoffer kan inneha en deltagande roll. Den föreliggande studien behandlar två huvudsakliga frågeställningar, av vilka den första lyder: Vilken ställning tillskrivs brottsoffren vid internationella domstolar och hybridtribunaler? I detta hänseende argumenterar författaren, sammanfattningsvis, för att brottsoffrens ställning vid internationella straffrättsliga domstolar och hybridtribunaler huvudsakligen tar sig uttryck på tre sätt, d.v.s. som brottsoffer i egenskap av vittnen, som brottsoffer i egenskap av deltagande brottsoffer/civilrättsliga parter samt som brottsoffer som kräver gottgörelse. Den andra frågeställningen för denna studie lyder: På vilket sätt fungerar brottsoffrens ställning som vittnen, brottsofferdeltagande/civilrättsliga parter och gottgörelsekrävande vid internationella och hybrida straffrättsliga domstolar? -------------------------------------------------------------------------------------------------------------------------------------------------- Kansainvälisten rikosten rankaiseminen kansainvälisissä rikostuomioistuimissa ja hybridituomioistuimissa on perinteisesti enimmäkseen perustunut retributiivisen oikeuden ja akkusatorisen menetelmän soveltamiseen pikemmin kuin restoratiivisen oikeuden ja inkvisitorisen menetelmän soveltamiseen. Niinpä uhrien asema kansainvälisissä rikostuomioistuimissa ja hybridituomioistuimissa on rajoittunut todistajan asemaan entisen Jugoslavian kansainvälisessä sotarikostuomioistuimessa (ICTY), Ruandan kansainvälisessä sotarikostuomioistuimessa (ICTR) ja Sierra Leonen erikoistuomioistuimessa (SCSL). Kansainvälisen rikostuomioistuimen (ICC) perustaminen on kuitenkin merkinnyt tärkeää muutosta uhrien asemaan kansainvälisen rikosoikeuden alalla siten, että kun uhrit aiemmin nähtiin vain todistajina, heillä on nyt myös mahdollisuus tuoda esiin omat näkökantansa (osallistumisoikeus) ja vaatia hyvitystä. Tämä suuntaus on jatkunut kansainvälisen rikosoikeuden alalla ICC:n jälkeen perustetuissa hybridituomioistuimissa, kuten Kambodzhan erityistuomioistuimessa (ECCC), missä uhrit voivat olla asianosaisen asemassa, sekä Libanonin erityistuomioistuimessa (STL), missä uhrit voivat osallistua prosessiin. Tämä tutkimus käsittelee kahta keskeistä kysymystä. Ensinnäkin: Mikä on rikoksen uhrien asema kansainvälisissä rikostuomioistuimissa ja hybridituomioistuimissa? Tutkimuksessa päädytään mm. siihen, että uhrien asema kansainvälisissä rikostuomioistuimissa ja hybridituomioistuimissa voi koostua pääosin kolmesta ulottuvuudesta eli uhrit todistajina, uhrit prosessiin osallistujina/asianosaisina ja uhrit hyvityksen hakijoina. Tutkimuksen toinen keskeinen kysymys on: Miten uhrien asema todistajina, prosessiin osallistujina/ asianosaisina ja hyvityksen hakijoina toimii kansainvälisissä rikostuomioistuimissa ja hybridituomioistuimissa?

Supply network risks and costs in Finnish project business

This report summarizes the results of the survey HAVERI – Supply network risks in business. The survey was conducted in Finland during the spring and summer of year 2013. The survey is part of a large two-year research project started in June 2012 in Finland (on-going 06/2012–07/2014). The project is launched and financed by TEKES, the Finnish Funding Agency for Technology and Innovation, and executed together with the researchers from Lappeenranta University of Technology and Tampere University of Technology. The overall goal of this on-going research project is to find out the decision-making practices in the project-oriented companies in their purchasing decisions especially in the mechanical engineering and construction industries in Finland. The objective of the survey was to gain cross-sectional data concerning the challenges, risks and cost factors in Finnish project business companies. The results show that Finnish companies rely on their experience and supplier references in their risk management. In general, the understanding of the total cost structure varies among the industries and companies. The main cost factor in risk management was costs before the actual purchase decision. Overall, it seems that the monetary value of the whole project and capability of purchasing personnel are the main influencing factors on risk management activity in project purchasing.

Design and implementation of a production synchronization extension for Microsoft Dynamics AX

In a just-in-time, assemble-to-order production environments the scheduling of material requirements and production tasks - even though difficult - is of paramount importance. Different enterprise resource planning solutions with master scheduling functionality have been created to ease this problem and work as expected unless there is a problem in the material flow. This case-based candidate’s thesis introduces a tool for Microsoft Dynamics AX multisite environment, that can be used by site managers and production coordinators to get an overview of the current open sales order base and prioritize production in the event of material shortouts to avoid part-deliveries.

Limits of Meritocracy. How Fields of Study and Gender Segregation Affect Social Stratification in Finland

This dissertation critically reviews the idea of meritocracy from both a theoretical and an empirical perspective. Based on a discussion of classical texts of social philosophy and sociology, it is argued that meritocracy as a concept for social stratification is best compatible with the sociological tradition of status attainment research: both frame social inequality in primarily individualistic terms, centring on the role of ascribed (e.g., gender, social background) and achieved (e.g., educational qualifications) characteristics for determining individuals’ socioeconomic rewards. This theoretical argument introduces the research problem at the core of this dissertation: to what extent can the individualistic conception of social stratification be maintained empirically? Fields of study and their interaction with educational attainment levels play a prominent role in the analysis of this question. Drawing on sociological versions of segmented labour market theory, it is assumed that fields of study may channel individuals into heterogeneous political-economic contexts on the labour market, which potentially modify the socioeconomic benefit individuals derive from their qualification levels. The focus on fields of study may also highlight economic differentials between men and women that derive from the persisting segregation of men’s and women’s occupational and educational specializations rather than direct gender discrimination on the labour market. The quantitative analyses in this dissertation consist of three research articles, which are based primarily on Finnish data, but occasionally extend the view to other European countries. The data sources include register-based macro- and microdata as well as survey data. Article I examines the extent and the patterns of gender segregation within the Finnish educational system between 1981 and 2005. The results show that differences between men’s and women’s field specializations have for the most part remained stable during this period, with particularly high levels of gender segregation observed at lower educational levels. The focus in Article II rests on the effects of gender-segregated fields of study on higher education graduates’ occupational status. It is shown that fields of study matter for accessing professional jobs and avoiding low-skilled positions in Finland: at the early career stage, particularly polytechnic graduates from female-dominated fields are less likely to work in professional positions. Finnish university graduates from male-dominated fields were more likely than their peers with different specializations to work as professionals, yet they also faced a greater risk of being sorted into lowskilled jobs if they failed to make use of this advantage. Article III proceeded to analyse the joint impact of educational qualification levels and fields of study on young adults’ median earnings in Finland between 1985 and 2005. The results show that qualification levels do not confer a consistent benefit in the process of earnings stratification. Advanced qualifications raise median earnings most clearly among individuals specializing in the same field of study. When comparing individuals with different field specializations, on the other hand, higher-level qualifications do not necessarily lead to higher median earnings. Overall, the findings of this dissertation reveal a heterogeneous effect of education for achieving social positions, which challenges individual-centred, meritocratic accounts of social stratification and underlines the problematic lack of structural and institutional dimensions in the dominant account of social status attainment.