MOCVD和GSMBE生长Ga（0.5）In（0.5）P 外延层中有序结构的研究

用MOCVD在(100)、GSMBE在(100)和(111)B GaAs上生长了GaInP���延层.PL测试表明,(100)衬底上GaIn PL 峰的能量比计算的带隙分别小43(GSMBE生长)和104meV(M(CVD生长).用Kurtz等人的模型对MOCVD和GSMBE生长的GaInP���有序度的不同进行了解释.并讨论了衬底晶向对GaInP���有序程度的影响.

自发有序Ga（0.5）In（0.5）P���金的静压光致发光研究

于2010-11-23批量导入

自发有序Ga（0.5）In（0.5）P���金的喇曼光谱研究

于2010-11-23批量导入

p���Si（1-x）Gex应变层中重掺杂禁带窄变的计算

于2010-11-23批量导入

[（CdSe）m（ZnSe）n]p-ZnSe多量子阱中的多声子散射

于2010-11-23批量导入

非对称耦合双阱P-I-N结构的光伏谱研究

于2010-11-23批量导入

1.5μmInGaAsP/InP P���衬底隐埋新月型（PBC）结构激光器

于2010-11-23批量导入

Impact of wide bandgap p-type nc-Si on the performance of a-Si solar cells

This paper reports the impact of a wide bandgap p-type hydrogenated nanocrystalline silicon (nc-Si:H) on the performances of hydrogenated amorphous silicon (a-Si:H) based solar cells. The player consists of nanometer-sized Si crystallites and has a wide effective bandgap determined mainly by the quantum size-confinement effect (QSE). By incorporation of this p-layer into the devices we have obtained high performances of a-Si:H top solar cells with V-infinity=1.045 V and FF=70.3 %, and much improved mid and bottom a-SiGe:H cells, deposited on stainless steel (SS) substrate. The effects of the band-edge mismatch at the p/i-interface on the I-V characteristics of the solar cells arc discussed on the bases of the density-functional approach and the AMPS model.

Influence of crystal perfection on the reverse leakage current of the SiGe Si p-n heterojunction diodes

Double-crystal X-ray diffraction and I-V characterization have been carried out on the GSMBE grown SiGe/Si p-n heterojunction materials. Results show that the SiGe alloys crystalline quality and the misfit dislocations are critical influences on the reverse leakage current. The crystal perfection and/or the degree of metastability of the Sice alloys have been estimated in terms of the model proposed by Tsao with the experimental results. High-quality p-n heterojunction diodes can be obtained by optimizing the SiGe alloy structures, which limit the alloys in the metastable states. (C) 1999 Elsevier Science B.V. All rights reserved.

Origin of flat-band voltage sharp roll-off in metal gate/high-k/ultrathin- SiO2/Si p-channel metal-oxide-semiconductor stacks

The origin of the flat band voltage roll-off (V-FB roll-off) in metal gate/high-k/ultrathin-SiO2/Si metal-oxide-semiconductor stacks is analyzed and a model describing the role of the dipoles at the SiO2/Si interface on the V-FB sharp roll-off is proposed. The V-FB sharp roll-off appears when the thickness of the SiO2 interlayer diminishes to below the oxygen diffusion depth. The results derived using our model agree well with experimental data and provide insights to the mechanism of the V-FB sharp roll-off.