BUSINESS CONCEPTS OF MOBILE VALUE-ADDED SERVICES FROM OPERATOR’S POINT OF VIEW

Tämä diplomityö on tehty Lappeenrannassa Telecom Business Research Centerin 5T-projektiin liittyen. Työssä tutkitaan matkaviestinnän lisäarvopalveluiden liiketoimintakonsepteja operaattoreiden näkökulmasta. Lisäarvopalvelut laajentavat operaattoreiden palveluvalikoimaa. Niiden osuuden telekommunikaatioalan yritysten ja erityisesti operaattoreiden tuotoista on ennustettu kasvavan huomattavasti. Työn tärkeimpänä tavoitteena on tuoda uusia näkökulmia ja lisätä ymmärrystä lisäarvopalveluiden liiketoimintakonseptin rakentamisprosessista. Tätä tietämystä käytetään edesauttamaan työn empiirisessä osuudessa tutkitun Content Gateway -tuotteen liiketoimintaa. Tarjoamalla nopean liitynnän ja laskutuskanavan ulkopuolisten palveluntarjoajien ja operaattorin välille tämä tuote mahdollistaa operaattorille ja palveluntarjoajille lisäarvopalveluiden liiketoiminnan käynnistämisen. Lisäarvopalveluiden arvonluontiprosessi vaatii lukuisia yhteistyötä tekeviä osapuolia, joiden yhteistoiminta on dynaamista ja tiedonvälitys avointa, interaktiivista ja nopeaa. Arvonluontiin liittyy myös monia konvergoituvia kehityssuuntia. Perinteinen arvoketjuajattelu on riittämätön uuteen, verkottuneeseen toimintaympäristöön ja sen tilalle on tullut modernimpi arvoverkostomalli. Arvoverkosto luo kilpailuetunsa muita verkostoja vastaan jakamalla resurssit ja kompetenssit optimaalisesti ja liittämällä strategisen ja operationaalisen johtamisen kulttuurit toisiinsa. Tässä työssä verrataan arvoverkoston teoreettisia tavoitteita kahteen lisäarvopalveluiden liiketoimintakonseptiin. Näistä ensimmäinen, i-mode –niminen konsepti on valittu vertailuun edistyksellisyytensä ja tulevaa kehitystä ennakoivien ominaispiirteidensä vuoksi. Toinen esimerkkikonsepti on rakennettu edellä mainitun Content Gateway -tuotteen ympärille. Tutkimus sisältää mm. liikekumppaneiden hankinnan, ansaintalogiikoiden ja verkostojen johtamisen analysoinnin. Työn tuloksena on saatu ohjeita siihen, miten operaattori voi rakentaa tällaista konseptia ja mitä seikkoja tulee ottaa huomioon erityisesti sanomapalveluihin liittyvässä liiketoiminnassa.

Development of a Business Model that Supports Mobile Value-Added Services Market Creation in Emerging Countries

Tutkielman tavoitteena on luoda liiketoimintamalli, joka tukee langattomien matkaviestintäpalveluiden markkinoiden luomista kehittyvillä markkinoilla. Teoreettinen osa tarkastelee langattomien matkaviestintäpalveluiden liiketoimintamallin kehittämisen tärkeimpiä elementtejä CIS maissa. Teoreettisen kappaleen tuloksena saadaan puitteet, jonka avulla liiketoimintamalli matkaviestintäpalveluille voidaan kehittää. Tutkielman empiirinen osa on toteutettu case tutkimuksena, jonka tavoitteena on ollut langattomien matkaviestintäpalvelujen markkinoiden luominen CIS maissa. Pääasiallinen empiirisen tiedon lähde on ollut teemahaastattelut. Tuloksena saatuja empiirisen osan tietoja verrataan teoriakappaleen vastaaviin tuloksiin Tulokset osoittavat, että radikaalin korkean teknologian innovaation markkinoiden luominen on hidas prosessi, joka vaatii kärsivällisyyttä yritykseltä. Markkinoiden, teknologian ja strategian epävarmuustekijät tuovat epävarmuutta kehittyvälle toimialalle ja markkinoille, joka vaikeuttaa liiketoimintamallin kehittämistä. Tärkein tekijä on palvelujen markkinointi ennemmin kuin teknologian. Avain kyvykkyys markkinoiden luomisessa on oppiminen, ei tietäminen.

Development of internet-based value added services in housing estate business in Russia

Value added services are becoming increasingly popular as they increase the perceived value of the core product and can be a strong method of attracting customers and motivating them to make a choice. The purpose of this research is to develop internet-based value added services for housing estate business in Russia. The research is a case study of Russian housing estate market utilising a triangulation of methods for better results. For the qualitative data analysis, 7 interviews with heads of regional departments of construction companies from different regions of Russia were conducted. For the quantitative data analysis, a survey of 128 inhabitants of Saint-Petersburg housing estates was held. Factor analysis and descriptive statistics including cross-tabulations and chi-square tests for significance were used to analyse the results. In this study, a list 19 value added services that can be provided through online platforms in housing estate market was developed. These services fall into three big groups: social networking services, compulsory and additional services. Additionally, the question of monetisation of online platforms in housing estate market was discussed and three business models were suggested.

SOA-Based Model for Value-Added ITS Services Delivery

Integration is currently a key factor in intelligent transportation systems (ITS), especially because of the ever increasing service demands originating from the ITS industry and ITS users. The current ITS landscape is made up of multiple technologies that are tightly coupled, and its interoperability is extremely low, which limits ITS services generation. Given this fact, novel information technologies (IT) based on the service-oriented architecture (SOA) paradigm have begun to introduce new ways to address this problem. The SOA paradigm allows the construction of loosely coupled distributed systems that can help to integrate the heterogeneous systems that are part of ITS. In this paper, we focus on developing an SOA-based model for integrating information technologies (IT) into ITS to achieve ITS service delivery. To develop our model, the ITS technologies and services involved were identified, catalogued, and decoupled. In doing so, we applied our SOA-based model to integrate all of the ITS technologies and services, ranging from the lowest-level technical components, such as roadside unit as a service (RS S), to the most abstract ITS services that will be offered to ITS users (value-added services). To validate our model, a functionality case study that included all of the components of our model was designed.

The New Era of Value Creation. Case: Sonera Zed

Tutkielman tavoitteena on selvittää kuinka arvonluonti-ideologia on muuttunut arvoketjuajattelusta arvoverkkomalliin ja mitä tekijöitä tarvitaan toimivan arvoverkon rakentamiseen. Teoriaosuus käsittelee arvonmuodostuksen muutosta kokonaisvaltaisesti. Tuloksena saavutetaan arvoverkko. Tutkielman empiirisessä osassa käytetään hyväksi laadullista case-tutkimusta. Teemahaastattelut ovat pääasiallinen empiirisen tiedon lähde. Tuloksena saatuja empiirisen osan tietoja verrataan teoriakappaleen vastaaviin tuloksiin. Case-yritys, Sonera zed, on suomalainen mobiiliportaaliyritys, joka tarjoaa matkapuhelimien lisäarvopalveluita loppuasiakkaille. Case-yrityksen operaatiomalli on rakentaa näitä palveluita yhteistyössä muiden yritysten kanssa. Empiirisen osan tavoite on selvittää toimiiko teoreettinen arvoverkkomalli myös tosielämässä. Arvoverkkomallia hyödynnetään case-yrityksessä vain osittain. Mallia käytetään hyväksi osa-alueilla missä yrityksellä ei ole omia kompetensseja. Sen sijaan alueilla joilla yritys omaa ydinosaamista, ei arvoverkkomallia hyödynnetä tarpeeksi. Tästä huolimatta uskotaan, että oikein hyödynnettynä arvoverkko kykenisi tarjoamaan merkittävää kilpailuetua kilpailijoihin nähden, mikäli mallia hyödynnettäisiin matkapuhelimien lisäarvopalvelutuotannon joka vaiheessa.

Value added logistical support service. Part 1 : Trends and new concept model

The aim of `Valssi' study was to find out the service requirements in `business-to-business' (B2B) markets and to present a new logistics service concept, where the traditional logistics service is expanded with significant manufacturing and value addedfacilities. The traditional third-party logistics service providers are not necessarily able to offer services, which cover widely the needs of potential customers. The study has been outlined to spare part markets in metal industry. In the second phase of the Valssi-project the aim is to examine the economical conditions and potentiality of the new logistics business concept. This research report (Part 1) concentrates on examining current trends in global and domestic logistics markets. Based on detailed survey among the participating companies, the study presents basis for a new logistics business concept model. The developed concept consists of 12 different service modules, which are split into deeper details of processes. The integration of worldwide supplier and service provider network together with customer companies systems is a challenge. The report focuses on evaluating the requirements for the new business concept from the customer-companies point of view. The study paints an overall picture of distribution and service provider network including an abstract about the software and system integration possibilities. As a result of the survey, it can be concluded that thereis need for the new business concept among the participating companies, and a modular service concept meets the requirements of them, because the new sophisticated concept considers the specialities involved in spare part logistics in metal industry.

Value added logistical support service: logistics cost structure and performance in the new concept. Part 3

The aim of this study is to present an Activity-Based Costing spreadsheet tool for analyzing the logistics costs. The tool can be used both by customer-companies and logistics service providers. The study discusses the influence of different activity models on costs. Additionally this paper discusses about the logistical performance across the total supply chain This study is carried out using ananalytical research approach and literature material has been used for supplementing the concerned research approach. Cost structure analysis was based on the theory of activity-based management. This study was outlined to spare part logistics in machine-shop industry. The outlines of logistics services and logisticalperformance discussed in this report are based on the new logistics business concept (LMS-concept), which has been presented earlier in the Valssi-project. Oneof the aims of this study is to increase awareness of different activity modelson logistics costs. The report paints an overall picture about the business environment and requirements for the new logistics concept.

Value added logistics in supply and demand chains. Smile. Part 1. eBusiness between global company and itslocal sme supplier network

VALOSADE (Value Added Logistics in Supply and Demand Chains) is the research project of Anita Lukka's VALORE (Value Added Logistics Research) research team inLappeenranta University of Technology. VALOSADE is included in ELO (Ebusiness logistics) technology program of Tekes (Finnish Technology Agency). SMILE (SME-sector, Internet applications and Logistical Efficiency) is one of four subprojects of VALOSADE. SMILE research focuses on case network that is composed of small and medium sized mechanical maintenance service providers and global wood processing customers. Basic principle of SMILE study is communication and ebusiness insupply and demand network. This first phase of research concentrates on creating backgrounds for SMILE study and for ebusiness solutions of maintenance case network. The focus is on general trends of ebusiness in supply chains and networksof different industries; total ebusiness system architecture of company networks; ebusiness strategy of company network; information value chain; different factors, which influence on ebusiness solution of company network; and the correlation between ebusiness and competitive advantage. Literature, interviews and benchmarking were used as research methods in this qualitative case study. Networks and end-to-end supply chains are the organizational structures, which can add value for end customer. Information is one of the key factors in these decentralized structures. Because of decentralization of business, information is produced and used in different companies and in different information systems. Information refinement services are needed to manage information flows in company networksbetween different systems. Furthermore, some new solutions like network information systems are utilised in optimising network performance and in standardizingnetwork common processes. Some cases have however indicated, that utilization of ebusiness in decentralized business model is not always a necessity, but value-add of ICT must be defined case-specifically. In the theory part of report, different ebusiness and architecture models are introduced. These models are compared to empirical case data in research results. The biggest difference between theory and empirical data is that models are mainly developed for large-scale companies - not for SMEs. This is due to that implemented network ebusiness solutions are mainly large company centered. Genuine SME network centred ebusiness models are quite rare, and the study in that area has been few in number. Business relationships between customer and their SME suppliers are nowadays concentrated more on collaborative tactical and strategic initiatives besides transaction based operational initiatives. However, ebusiness systems are further mainly based on exchange of operational transactional data. Collaborative ebusiness solutions are in planning or pilot phase in most case companies. Furthermore, many ebusiness solutions are nowadays between two participants, but network and end-to-end supply chain transparency and information systems are quite rare. Transaction volumes, data formats, the types of exchanged information, information criticality,type and duration of business relationship, internal information systems of partners, processes and operation models (e.g. different ordering models) differ among network companies, and furthermore companies are at different stages on networking and ebusiness readiness. Because of former factors, different customer-supplier combinations in network must utilise totally different ebusiness architectures, technologies, systems and standards.

Value added logistical support service Part 2. Outsourcing process of spare part logistics in metal industry

The aim of this research study was to find out guidelines for outsourcing of logistics processes. The study was outlined to spare parts and `business-to-business' (B2B) markets in metal industry. This study can be applied as a manual for outsourcing especially warehousing and transportation activities. The study also touches other important areas of spare part logistics like manufacturing, customer service, procurement, quality control, reverse and recycling logistics, logistics technologies and valueadded services. The method of study consisted of three areas. Firstly exchanging views with logistics experts in participating companies, and secondly compiling material based on author's practical experience in logistics business with several international and domestic logistics service providers and vendors. Thirdlythe study includes also references to literature material. Due to the fact thatthe outsourcing of logistics functions can be handled widely and from differentpoint of views, in this study it is concentrated mainly on giving general levelguidelines for defining logistics strategy, hints both for tendering process and implementation project, and not forgetting the aftercare of business partnership.

Competitor Analysis on Mobile Application Developer Communities

Tulevaisuudessa telekommunikaatioala tulee keskittymään pitkälti langattomiin sovelluksiin ja lisäarvopalveluihin. Tuottaakseen näitä palveluja alan yritykset tekevät yhteistyötä laajan kehittäjäjoukon kanssa. Työn tavoitteena oli parantaa case-yrityksen jo olemassaolevaa toimintamallia, jota se soveltaa yhteistyössään kehittäjien kanssa. Tutkimus keskittyy mobiiliapplikaatiokehittäjiin. Toimintamalli kattaa pääasiassa palvelutarjonnan kehittäjä-allianssissa.Jotta toimintamalliin pystyttäisiin tekemään strategisia muutoksia, oli aluksi tärkeä tunnistaa kehittäjien tarpeet ja toiseksi tarkkailla ja analysoida ympäristöä ja sillä tavoin tunnistaa pääkilpailijat ja heidän tarjontansa mobiiliapplikaatiokehittäjille. Tutkimus toteutettiin suorittamalla postikysely kehittäjille ja toisaalta tekemällä laadullinen tutkimus kilpailijoista. Kilpailutilanteen luonne ja potentiaaliset kilpailijat olivat tunnistettavissa. Parannusehdotukset sisälsivät sekä yleisiä että palvelukohtaisia parannuksia.

Value added logistics in supply and demand chain : COSTFIX : New operation model for maintenance material logistics in paper industry

This research report illustrates and examines new operation models for decreasing fixed costs and transforming them into variable costs in the field of paper industry. The report illustrates two cases – a new operation model for material logistics in maintenance and an examination of forklift truck fleet outsourcing solutions. Conventional material logistics in maintenance operation is illustrated and some problems related to conventional operation are identified. A new operation model that solves some of these problems is presented including descriptions of procurement and service contracts and sources of added value. Forklift truck fleet outsourcing solutions are examined by illustrating the responsibilities of a host company and a service provider both before and after outsourcing. The customer buys outsourcing services in order to improve its investment productivity. The mechanism of how these services affect the customer company’s investment productivity is illustrated.

Automated Purchase to Pay Process Value Modeling and Comparative Process Speeds

The importance of efficient supply chain management has increased due to globalization and the blurring of organizational boundaries. Various supply chain management technologies have been identified to drive organizational profitability and financial performance. Organizations have historically been concentrating heavily on the flow of goods and services, while less attention has been dedicated to the flow of money. While supply chains are becoming more transparent and automated, new opportunities for financial supply chain management have emerged through information technology solutions and comprehensive financial supply chain management strategies. This research concentrates on the end part of the purchasing process which is the handling of invoices. Efficient invoice processing can have an impact on organizations working capital management and thus provide companies with better readiness to face the challenges related to cash management. Leveraging a process mining solution the aim of this research was to examine the automated invoice handling process of four different organizations. The invoice data was collected from each organizations invoice processing system. The sample included all the invoices organizations had processed during the year 2012. The main objective was to find out whether e-invoices are faster to process in an automated invoice processing solution than scanned invoices (post entry into invoice processing solution). Other objectives included looking into the longest lead times between process steps and the impact of manual process steps on cycle time. Processing of invoices from maverick purchases was also examined. Based on the results of the research and previous literature on the subject, suggestions for improving the process were proposed. The results of the research indicate that scanned invoices were processed faster than e-invoices. This is mostly due to the more complex processing of e-invoices. It should be noted however that the manual tasks related to turning a paper invoice into electronic format through scanning are ignored in this research. The transitions with the longest lead times in the invoice handling process included both pre-automated steps as well as manual steps performed by humans. When the most common manual steps were examined in more detail, it was clear that these steps had a prolonging impact on the process. Regarding invoices from maverick purchases the evidence shows that these invoices were slower to process than invoices from purchases conducted through e-procurement systems and from preferred suppliers. Suggestions on how to improve the process included: increasing invoice matching, reducing of manual steps and leveraging of different value added services such as invoice validation service, mobile solutions and supply chain financing services. For companies that have already reaped all the process efficiencies the next step is to engage in collaborative financial supply chain management strategies that can benefit the whole supply chain.

Value added trade and structure of high-technology exports in China

This study focuses on the technological intensity of China's exports. It first introduces the method of decomposing gross exports by using the Asian international input–output tables. The empirical results indicate that the technological intensity of Chinese exports has been significantly overestimated due to its high dependency on import content, especially in high-technology exports, an area highly dominated by the electronic and electrical equipment sector. Furthermore, a significant portion of value added embodied in China's high-technology exports comes from services and high-technology manufacturers in neighboring economies, such as Japan, South Korea, and Taiwan.