905 resultados para Higiene das mãos
Resumo:
zhangdi于2010-03-29批量导入
Resumo:
Ionizing radiation response of partially-depleted MOS transistors fabricated in the, fluorinated SIMOX wafers has been investigated. The experimental data show that the, radiation-induced threshold voltage shift of PMOSFETs and NMOSFETs, as well as the radiation-induced increase of off-state leakage current of NMOSFETs can be restrained by implanting fluorine ions into the buried oxide of SIMOX wafers.
Resumo:
Homoepitaxial growth of 4H-SiC on off-oriented n-type Si-face (0001) substrates was performed in a home-made hot-wall low pressure chemical vapor deposition (LPCVD) reactor with SiH4 and C2H4 at temperature of 1500 C and pressure of 20 Torr. The surface morphology and intentional in-situ NH3 doping in 4H-SiC epilayers were investigated by using atomic force microscopy (AFM) and secondary ion mass spectroscopy (SIMS). Thermal oxidization of 4H-SiC homoepitaxial layers was conducted in a dry O-2 and H-2 atmosphere at temperature of 1150 C. The oxide was investigated by employing x-ray photoelectron spectroscopy (XPS). 4H-SiC MOS structures were obtained and their C-V characteristics were presented.
Resumo:
This paper presents a novel fully integrated MOS AC to DC charge pump with low power dissipation and stable output for RFID applications. To improve the input sensitivity, we replaced Schottky-diodes in conventional charge pumps with MOS diodes with zero threshold, which has less process defects and is thus more compatible with other circuits. The charge pump in a RFID transponder is implemented in a 0.35um CMOS technology with 0.24 sq mm die size. The analytical model of the charge pump and the simulation results are presented.
Resumo:
This paper proposes a novel single electron random number generator (RNG). The generator consists of multiple tunneling junctions (MTJ) and a hybrid single electron transistor (SET)/MOS output circuit. It is an oscillator-based RNG. MTJ is used to implement a high-frequency oscillator,which uses the inherent physical randomness in tunneling events of the MTJ to achieve large frequency drift. The hybrid SET and MOS output circuit is used to amplify and buffer the output signal of the MTJ oscillator. The RNG circuit generates high-quality random digital sequences with a simple structure. The operation speed of this circuit is as high as 1GHz. The circuit also has good driven capability and low power dissipation. This novel random number generator is a promising device for future cryptographic systems and communication applications.
Resumo:
We propose and analyze a novel Si-based electro-optic modulator with an improved metal-oxide-semiconductor (MOS) capacitor configuration integrated into silicon-on-insulator (SOI).Three gate-oxide layers embedded in the silicon waveguide constitute a triple MOS capacitor structure,which boosts the modulation efficiency compared with a single MOS capacitor.The simulation results demonstrate that the VπLπ product is 2.4V·cm.The rise time and fall time of the proposed device are calculated to be 80 and 40ps from the transient response curve,respectively,indicating a bandwidth of 8GHz.The phase shift efficiency and bandwidth can be enhanced by rib width scaling.
Resumo:
在射频能量AC/DC的能源转换实现研究中提出一种采用低阈值MOS管构成的高效电荷泵.新方案消除了现有的肖特基二极管高效电荷泵制作工艺特殊、批次性能不够一致的缺陷.分析表明,通过有机调整MOS管宽长比、器件电容、充电级数等设计参量,可以方便地满足不同的性能要求,实现集成制作方便、性能稳定的高效射频能量AC/DC型电荷泵.
Resumo:
为了进一步减小栅漏电,提高击穿电压,将MOS结构的优点引入ALGaN/GaN HEMT器件中,研制并分析了新型的基于AlGaN/GaN的 MOS-HFET结构.采用等离子增强气相化学沉积(PECVD)的方法生长了50 nm的SiO2作为栅绝缘层,新型的AlGaN/GaN MOS-HFET器件栅长1 μm,栅宽80 μm,测得最大饱和输出电流为784 mA/mm,最大跨导为44.25 ms/mm,最高栅偏压+6 V.
Resumo:
对SiC MOS结构辐照引起的电参数退化及其电特性进行了研究。结果说明
Resumo:
采用高频C-V曲线方法,研究了50nm及15nm MOS电容电离辐射空穴陷阱及界面态的建立过程。二种样品电离辐射空穴陷阱电荷密度在1×10~3Gy(Si)剂量下近乎相同,而在大于3×10~3Gy(Si)_剂量下,50nm MOS电容的电荷密度约为15nm MOS电容的2倍。利用电离辐射后的隧道退火效应,计算出二种样品电离辐射陷阱电荷在Si-SiO_2界面附近分布的距离均约为4nm。
Resumo:
In this paper, a one-way NMOS analog switch featuring a low plug-in consumption is presented. The performances of analog switch, especially the performances of source follower are simulated under different conditions with PSPICE. Simulation results and factors affecting the deviation between input and output are analyzed, some advice on how to reduce the deviation between input and output is given. Ar the end of the paper, voltage relationship between input and output of the analog switch is obtained. Function of first degree, Vout = kVin + V0, is used to approximate the voltage relationship. The simulation results anti the value achieved from the approximation equation are given as well.