Degradation studies of organic acids in commercially packed fruit juices: A reverse phase high performance liquid chromatographic approach

Organic acids are important constituents of fruit juices. They render tartness, flavour and specific taste to fruit juices. Shelf life and stability of fruit juices are important factors, which determine their nutritional quality and freshness. In this view, the effect of storage on the concentration of organic acids in commercially packed fruit juices is studied by reverse phase high performance liquid chromatography (RP-HPLC). Ten packed fruit juices from two different brands are stored at 30 C for 24, 48 and 72 hours. A reverse phase high performance liquid chromatographic method is used to determine the concentration of oxalic, tartaric, malic, ascorbic and citric acid in the fruit juices during storage. The chromatographic analysis of organic acids is carried out using mobile phase 0.5% (w/v) ammonium dihydrogen orthophosphate buffer (pH 2.8) on C18 column with UV-Vis detector. The results show that the concentration of organic acids generally decreases in juices under study with the increase in storage time. All the fruit juices belonging to tropicana brand underwent less organic acid degradation in comparison to juices of real brand. Orange fruit juice is found to be least stable among the juices under study, after the span of 72 hours. Amongst all the organic acids under investigation minimum stability is shown by ascorbic acid followed by malic and citric acid.

Enhanced viability of probiotic Saccharomyces boulardii encapsulated by layer-by-layer approach in pH responsive chitosan-dextran sulfate polyelectrolytes

Saccharomyces boulardii was encapsulated by layer-by-layer technique (LbL) using oppositely charged polyelectrolytes, chitosan and dextran sulfate to protect from degradation during its gastrointestinal transit. The protective effect of the coating was evaluated by checking viability after subjecting the coated cells to lyophilisation and simulated gastrointestinal conditions. During lyophilization, coated S. boulardii was found to have an enhanced viability of 7.74 +/- 2.00 log CFU/100 mg (5.62 x 10(6) +/- 2.12 CFU/100 mg) and 5.53 +/- 1.85 log CFU/100 mg (3.46 x 10(5) 1.73 CFU/100 mg) for uncoated cells. On sequential treatment with simulated gastric and intestinal juice, the coated cells had a viability of 4.59 +/- 1.52 log CFU/100 mg (3.8 x 104 +/- 1.52 CFU/100 mg) while only 1.90 +/- 0.80 log CFU/100 mg (0.79 x 102 +/- 0.81 CFU/100 mg) of uncoated cells survived. Confocal studies displayed the selective permeability of the coated cells which plays a significant role in maintaining the integrity and viability of the yeast cells. This clearly indicates that LbL is an efficient protective encapsulation technique and it could be potentially used for improving therapeutic applications of yeast. (C) 2014 Elsevier Ltd. All rights reserved.

Experimental and numerical simulation of dough kneading in filled geometries

Binding, David; Couch, M.A.; Sujatha, K.S.; Webster, M.F., (2003) 'Experimental and numerical simulation of dough kneading in filled geometries', Journal of Food Engineering 58 pp.111-123 RAE2008

An experimental study of the peeling of dough from solid surfaces

Binding, David; Couch, M.A., (2003) 'An experimental study of the peeling of dough from solid surfaces', Journal of Food Engineering 58(2) pp.299-309 RAE2008

Experimental quantification and modelling of attrition of infant formulae during pneumatic conveying

Infant formula is often produced as an agglomerated powder using a spray drying process. Pneumatic conveying is commonly used for transporting this product within a manufacturing plant. The transient mechanical loads imposed by this process cause some of the agglomerates to disintegrate, which has implications for key quality characteristics of the formula including bulk density and wettability. This thesis used both experimental and modelling approaches to investigate this breakage during conveying. One set of conveying trials had the objective of establishing relationships between the geometry and operating conditions of the conveying system and the resulting changes in bulk properties of the infant formula upon conveying. A modular stainless steel pneumatic conveying rig was constructed for these trials. The mode of conveying and air velocity had a statistically-significant effect on bulk density at a 95% level, while mode of conveying was the only factor which significantly influenced D[4,3] or wettability. A separate set of conveying experiments investigated the effect of infant formula composition, rather than the pneumatic conveying parameters, and also assessed the relationships between the mechanical responses of individual agglomerates of four infant formulae and their compositions. The bulk densities before conveying, and the forces and strains at failure of individual agglomerates, were related to the protein content. The force at failure and stiffness of individual agglomerates were strongly correlated, and generally increased with increasing protein to fat ratio while the strain at failure decreased. Two models of breakage were developed at different scales; the first was a detailed discrete element model of a single agglomerate. This was calibrated using a novel approach based on Taguchi methods which was shown to have considerable advantages over basic parameter studies which are widely used. The data obtained using this model compared well to experimental results for quasi-static uniaxial compression of individual agglomerates. The model also gave adequate results for dynamic loading simulations. A probabilistic model of pneumatic conveying was also developed; this was suitable for predicting breakage in large populations of agglomerates and was highly versatile: parts of the model could easily be substituted by the researcher according to their specific requirements.

Heat and mass transfer in two-phase porous materials under intensive microwave heating

Computational results for the intensive microwave heating of porous materials are presented in this work. A multi-phase porous media model has been developed to predict the heating mechanism. Combined finite difference time-domain and finite volume methods were used to solve equations that describe the electromagnetic field and heat and mass transfer in porous media. The coupling between the two schemes is through a change in dielectric properties which were assumed to be dependent both on temperature and moisture content. The model was able to reflect the evolution of both temperature and moisture fields as well as energy penetration as the moisture in the porous medium evaporates. Moisture movement results from internal pressure gradients produced by the internal heating and phase change.

Optimisation of time/temperature treatment, for heat treated soft wheat flour

Chlorination of wheat flour in the EU countries has been replaced in recent years, to some extent, by heat treated flour which is used to produce high ratio cakes. Heat treated flour allows high ratio recipes to be developed which generate products with longer shelf life, finer texture, moist crumb and sweeter taste. The mechanism by which heat treatment improves the flour is not fully understood, but it is known that during the heat treatment process, protein denaturation and partial gelatinisation of the starch granules occurs, as well as an increase in batter viscosity. Therefore, it is important to optimize the flour heat treatment process, in order to enhance baking quality. Laboratory preparation of heat treated base wheat flour (culinary, soft, low protein) was carried out in a fluidised bed drier using a range of temperatures and times. The gluten was extracted from the final product and its quality was tested, to obtain objective and comparative information on the extent of protein denaturation. The results indicated that heat treatment of flour decreases gluten extensibility and partial gelatinisation of the starch granules occurred. After heat treatment the gluten appeared to retain moisture. The optimum time/temperature for the heat treatment of base flour was 120-130°C for 30 min with moisture content of ˜12.5%.© 2012 Elsevier Ltd. All rights reserved.

O projeto PmatE e a aprendizagem da matemática no ensino superior

O contexto educacional exige renovação de paradigmas. Impõem-se profundas alterações ao nível do papel e da função do professor e dos alunos, devendo-se privilegiar metodologias de aprendizagem ativas, cooperativas e participativas, rompendo-se com o ensino magistral e a mera transmissão de ‘conhecimentos’. As ferramentas informáticas poderão constituir-se uma mais-valia no contexto educativo, promovendo uma aprendizagem significativa e autorregulada pelo aluno, sempre sob a adequada orientação do professor. Neste contexto, foi criado, na Universidade de Aveiro, o Projeto Matemática Ensino (PmatE), com o principal objetivo de combater, de uma forma inovadora, as causas do insucesso escolar a matemática. No entanto, tal plataforma ainda não foi alvo de uma avaliação sistemática, nomeadamente ao nível do ensino superior, que nos permita concluir da consecução dos seus propósitos. Assim, a questão de investigação subjacente ao estudo em curso é - Qual o impacte da utilização diferenciada, como complemento à abordagem didáctica, da plataforma de ensino assistido (PEA) desenvolvida pelo PmatE na aprendizagem de temas matemáticos ao nível do Ensino Superior, principalmente ao nível da autonomia, da construção e aplicação de conhecimentos e do desenvolvimento de apetências pela Matemática. Para se tentar dar resposta à mesma, implementou-se um estudo misto, quantitativo e qualitativo, com alunos da unidade curricular Análise Matemática I do Curso Engenharia Alimentar de um Instituto Politécnico português, a quem se propôs uma exploração prévia da plataforma extra-aula para que, nesse espaço, se pudesse conceptualizar os conceitos envolvidos e realizar tarefas variadas quanto à sua natureza. Usaram-se como principais técnicas de recolha de dados a análise documental, a inquirição e a observação direta, suportadas pelos diversos instrumentos: Questionário Inicial e Final; testes de avaliação, nas versões pré-teste, pós-teste1 e pós-teste2; produções de uma bateria de tarefas de natureza diversificada; registo computorizado do percurso dos alunos relativamente ao trabalho por eles desenvolvido na plataforma do PmatE; notas de campo; dossier dos alunos e entrevistas. Os resultados obtidos, a partir de uma análise estatística dos dados quantitativos e de conteúdo dos dados qualitativos, indicam, por um lado, que os alunos mais autónomos, mais persistentes e que obtêm os melhores resultados são os alunos que usaram a plataforma com frequência e, por outro, que a utilização da plataforma contribuiu para aumentar o gosto pela Matemática. Este estudo permitiu, também, obter informação importante sobre aspetos que poderão melhorar a plataforma, em particular, relativos à natureza das tarefas e à resolução dos exercícios propostos.

El Outsourcing en la dinámica de sistemas hacia mercados extranjeros

Este trabajo recopila literatura académica relevante sobre estrategias de entrada y metodologías para la toma de decisión sobre la contratación de servicios de Outsourcing para el caso de empresas que planean expandirse hacia mercados extranjeros. La manera en que una empresa planifica su entrada a un mercado extranjero, y realiza la consideración y evaluación de información relevante y el diseño de la estrategia, determina el éxito o no de la misma. De otro lado, las metodologías consideradas se concentran en el nivel estratégico de la pirámide organizacional. Se parte de métodos simples para llegar a aquellos basados en la Teoría de Decisión Multicriterio, tanto individuales como híbridos. Finalmente, se presenta la Dinámica de Sistemas como herramienta valiosa en el proceso, por cuanto puede combinarse con métodos multicriterio.

Determinação da Lipoperoxidação em óleo alimentar

O ensaio realizado visa a determinação do índice de peróxidos (IP) em amostras de óleo alimentar refinado através do aquecimento das amostras durante 10, 20, 60 minutos. Com os sucessivos aquecimentos é possível avaliar o grau de degradação do produto alimentar pela formação de substâncias oxidantes esperando-se que, consoante o tempo de aquecimento, ocorra um aumento IP. Uma exposição contínua aos radicais livres poderá desencadear alterações a longo prazo no organismo do consumidor.