941 resultados para end user computing application streaming horizon workspace portalvmware view
Resumo:
OBJECTIVE: Skeletal Muscle Biopsy is a minor surgical procedure for the diagnosis of different neuromuscular pathological conditions and has recently gained popularity also in the research field of age-related muscular modifications and sarcopenia. Few studies focused on the application of mini-invasive muscular biopsy in both normal and pathological conditions. The aim of our study was to describe a mini invasive ultrasound-guided skeletal muscular biopsy technique in complete spinal cord injured (SCI) patients and healthy controls with a tri-axial end-cut needle. PATIENTS AND METHODS: Skeletal muscle biopsies were collected from 6 chronic SCI patients and 3 healthy controls vastus lateralis muscle with a tri-axial end cut needle (Biopince© - Angiotech). Muscle samples were stained for ATPase to determine fibers composition, moreover, gene expression of cyclooxygenase-1 (COX-1) and prostaglandin E2 receptor has been analyzed by Real Time RT-PCR. RESULTS: All the procedures were perfomed easily without failures and complications. Control tissue was macroscopically thicker than SCI one. Control specimen displayed an equal distribution of type I and type II fibers, while SCI sample displayed a prevalence of type II fibers SCI specimen displayed a significant reduction in COX-1 gene expression. This mini-invasive approach was easy, accurate and with low complication rate in performing skeletal muscle biopsy in both SCI patients and controls. CONCLUSIONS: This technique could be useful in conditions in which the overall quantity of specimen required is small like for molecular biology analysis. For histological diagnostic purposes and/or conditions in which the original tissue is already pathologically modified, this technique should be integrated with more invasive techniques.
Resumo:
Verenpaineen kotimittaus − epidemiologia ja kliininen käyttö Kohonnutta verenpainetta, maailmanlaajuisesti merkittävintä ennenaikaiselle kuolemalle altistavaa riskitekijää, ei voida tunnistaa tai hoitaa ilman tarkkoja ja käytännöllisiä verenpaineen mittausmenetelmiä. Verenpaineen kotimittaus on saavuttanut suuren suosion potilaiden keskuudessa. Lääkärit eivät ole kuitenkaan vielä täysin hyväksyneet verenpaineen kotimittausta, sillä riittävä todistusaineisto sen toimivuudesta ja eduista on puuttunut. Tämän tutkimuksen tarkoituksena oli osoittaa, että kotona mitattu verenpaine (kotipaine) on perinteistä vastaanotolla mitattua verenpainetta (vastaanottopaine) tarkempi, ja että se on tehokas myös kliinisessä käytössä. Tutkimme kotipaineen käyttöä verenpainetaudin diagnosoinnissa ja hoidossa. Lisäksi tarkastelimme kotipaineen yhteyttä verenpainetaudin aiheuttamiin kohde-elinvaurioihin. Ensimmäinen aineisto, joka oli edustava otos Suomen aikuisväestöstä, koostui 2 120 45–74-vuotiaasta tutkimushenkilöstä. Tutkittavat mittasivat kotipainettaan viikon ajan ja osallistuivat terveystarkastukseen, johon sisältyi kliinisen tutkimuksen ja haastattelun lisäksi sydänfilmin otto ja vastaanottopaineen mittaus. 758 tutkittavalle suoritettiin lisäksi kaulavaltimon seinämän intima-mediakerroksen paksuuden (valtimonkovettumataudin mittari) mittaus ja 237:lle valtimon pulssiaallon nopeuden (valtimojäykkyyden mittari) mittaus. Toisessa aineistossa, joka koostui 98 verenpainetautia sairastavasta potilaasta, hoitoa ohjattiin satunnaistamisesta riippuen joko ambulatorisen eli vuorokausirekisteröinnillä mitatun verenpaineen tai kotipaineen perusteella. Vastaanottopaine oli kotipainetta merkittävästi korkeampi (systolisen/diastolisen paineen keskiarvoero oli 8/3 mmHg) ja yksimielisyys verenpainetaudin diagnoosissa kahden menetelmän välillä oli korkeintaan kohtalainen (75 %). 593 tutkittavasta, joilla oli kohonnut verenpaine vastaanotolla, 38 %:lla oli normaali verenpaine kotona eli ns. valkotakkiverenpaine. Verenpainetauti voidaan siis ylidiagnosoida joka kolmannella potilaalla seulontatilanteessa. Valkotakkiverenpaine oli yhteydessä lievästi kohonneeseen verenpaineeseen, matalaan painoindeksiin ja tupakoimattomuuteen, muttei psykiatriseen sairastavuuteen. Valkotakkiverenpaine ei kuitenkaan vaikuttaisi olevan täysin vaaraton ilmiö ja voi ennustaa tulevaa verenpainetautia, sillä siitä kärsivien sydän- ja verisuonitautien riskitekijäprofiili oli normaalipaineisten ja todellisten verenpainetautisten riskitekijäprofiilien välissä. Kotipaineella oli vastaanottopainetta vahvempi yhteys verenpainetaudin aiheuttamiin kohde-elinvaurioihin (intima-mediakerroksen paksuus, pulssiaallon nopeus ja sydänfilmistä todettu vasemman kammion suureneminen). Kotipaine oli tehokas verenpainetaudin hoidon ohjaaja, sillä kotipaineeseen ja ambulatoriseen paineeseen, jota on pidetty verenpainemittauksen ”kultaisena standardina”, perustuva lääkehoidon ohjaus johti yhtä hyvään verenpaineen hallintaan. Tämän ja aikaisempien tutkimusten tulosten pohjalta voidaan todeta, että verenpaineen kotimittaus on selkeä parannus perinteiseen vastaanotolla tapahtuvaan verenpainemittaukseen verrattuna. Verenpaineen kotimittaus on käytännöllinen, tarkka ja laajasti saatavilla oleva menetelmä, josta voi tulla jopa ensisijainen vaihtoehto verenpainetautia diagnosoitaessa ja hoitaessa. Verenpaineen mittauskäytäntöön tarvitaan muutos, sillä näyttöön perustuvan lääketieteen perusteella vaikuttaa, että vastaanotolla tapahtuvaa verenpainemittausta tulisi käyttää vain seulontatarkoitukseen.
Resumo:
Concurrent aims to be a different type of task distribution system compared to what MPI like system do. It adds a simple but powerful application abstraction layer to distribute the logic of an entire application onto a swarm of clusters holding similarities with volunteer computing systems. Traditional task distributed systems will just perform simple tasks onto the distributed system and wait for results. Concurrent goes one step further by letting the tasks and the application decide what to do. The programming paradigm is then totally async without any waits for results and based on notifications once a computation has been performed.
Resumo:
The advent of the Internet had a great impact on distance education and rapidly e-learning has become a killer application. Education institutions worldwide are taking advantage of the available technology in order to facilitate education to a growing audience. Everyday, more and more people use e-learning systems, environments and contents for both training and learning. E-learning promotes educationamong people that due to different reasons could not have access to education: people who could nottravel, people with very little free time, or withdisabilities, etc. As e-learning systems grow and more people are accessing them, it is necessary to consider when designing virtual environments the diverse needs and characteristics that different users have. This allows building systems that people can use easily, efficiently and effectively, where the learning process leads to a good user experience and becomes a good learning experience.
Resumo:
Peer-reviewed
Resumo:
Bodily injury claims have the greatest impact on the claim costs of motor insurance companies. The disability severity of motor claims is assessed in numerous European countries by means of score systems. In this paper a zero inflated generalized Poisson regression model is implemented to estimate the disability severity score of victims in-volved in motor accidents on Spanish roads. We show that the injury severity estimates may be automatically converted into financial terms by insurers at any point of the claim handling process. As such, the methodology described may be used by motor insurers operating in the Spanish market to monitor the size of bodily injury claims. By using insurance data, various applications are presented in which the score estimate of disability severity is of value to insurers, either for computing the claim compensation or for claim reserve purposes.
Resumo:
Useimmiten www-sovellusten käyttöliittymien rakentamiseen käytetään ohjelmistokehyksiä. Www-sovelluskehys voidaan valita lukuisista valmiista vaihtoehdoista. Valinta on kuitenkin ongelmallista. Vaikka hyviä vaihtoehtoja on paljon, www-sovelluskehykset ovat parhaimmillaan vain tietyissä tilanteissa. Tämän työn tavoitteena oli löytää keino vertailla www-sovelluskehyksiä. Menetelmän haluttiin olevan kustannustehokas. Työssä hyödynnettiin kirjallisuudesta löytyviä ohjeita ohjelmistokomponenttien ja työkalujen valintaan. Ohjeiden avulla valittiin www-sovelluskehyksien vertailuun sopivia arviointikriteerejä. Arviointikriteerien määrittelyä varten tutkittiin ohjelmistokehysten ja www-sovelluskehysten vaatimuksia. Ohjeiden avulla suoritettiin myös vertailu käytännössä. Työn tuloksena syntyneitä www-sovelluskehysten vaatimuksia ja arviointikriteerejä voidaan käyttää suoraan vertailuissa alustasta riippumatta. Tulosten avulla voidaan vähentää www-sovelluskehysten valintaan tarvittavan työn määrää. Työhön sisältyneen vertailun suorittamiseen kului kohtuullinen määrä aikaa, ja sillä kyettiin tunnistamaan eroja www-sovelluskehysten välillä.
Resumo:
As part of the Affective Computing research field, the development of automatic affective recognition systems can enhance human-computer interactions by allowing the creation of interfaces that react to the user's emotional state. To that end, this Master Thesis brings affect recognition to nowadays most used human computer interface, mobile devices, by developing a facial expression recognition system able to perform detection under the difficult conditions of viewing angle and illumination that entails the interaction with a mobile device. Moreover, this Master Thesis proposes to combine emotional features detected from expression with contextual information of the current situation, to infer a complex and extensive emotional state of the user. Thus, a cognitive computational model of emotion is defined that provides a multicomponential affective state of the user through the integration of the detected emotional features into appraisal processes. In order to account for individual differences in the emotional experience, these processes can be adapted to the culture and personality of the user.
Resumo:
Tietotekniikan osaston osastokirjaston nykyinen varausjärjestelmä toimii paperilapuin merkittävin varauksin. Kirjojen lainaus- ja saatavuustilanne halutaan selkeämmäksi, sekä lainausprosessi helpommaksi. Työssä suunnitellaan varausjärjestelmä vanhan kirjojen hakuun jo olemassa olevan järjestelmän pohjalta, kaikki ohjelmakoodi kirjoitetaan kuitenkin uusiksi, jotta järjestelmä olisi yhtenäinen. Uusina toimintoina lisätään kirjojen varaus ja lainaus, sekä admin-käyttäjälle mahdollisuus tarkastella lainoja ja varauksia. Työn toteutuksessa edetessä sitä testataan jatkuvasti, ennen käyttöönottoa järjestelmää testataan oikeassa käyttöympäristössään. Työn tuloksena on järjestelmä, joka mahdollistaa kirjojen varaamisen ja lainaamisen sekä selkeyttää kirjojen lainaustilannetta. Lisäksi tässä dokumentissa selvitetään lyhyesti järjestelmän jatkokehitysmahdollisuuksia.
Resumo:
The present paper reports a bacteria autonomous controlled concentrator prototype with a user-friendly interface for bench-top applications. It is based on a micro-fluidic lab-on-a-chip and its associated custom instrumentation, which consists in a dielectrophoretic actuator, to pre-concentrate the sample, and an impedance analyser, to measure concentrated bacteria levels. The system is composed by a single micro-fluidic chamber with interdigitated electrodes and a instrumentation with custom electronics. The prototype is supported by a real-time platform connected to a remote computer, which automatically controls the system and displays impedance data used to monitor the status of bacteria accumulation on-chip. The system automates the whole concentrating operation. Performance has been studied for controlled volumes of Escherichia coli (E. coli) samples injected into the micro-fluidic chip at constant flow rate of 10 μL/min. A media conductivity correcting protocol has been developed, as the preliminary results showed distortion of the impedance analyser measurement produced by bacterial media conductivity variations through time. With the correcting protocol, the measured impedance values were related to the quantity of bacteria concentrated with a correlation of 0.988 and a coefficient of variation of 3.1%. Feasibility of E. coli on-chip automated concentration, using the miniaturized system, has been demonstrated. Furthermore, the impedance monitoring protocol had been adjusted and optimized, to handle changes in the electrical properties of the bacteria media over time.
Resumo:
The application of information technology (IT) in customer relationship management (CRM) is growing rapidly as many companies implement CRM systems to support their numerous customer facing activities. However, failure rates of CRM projects remain notably high as they deliver scant solutions and poor user acceptance. As a consequence, it is justified to study previously researched CRM success factors and apply them to CRM system implementation. The aim of this master’s thesis was to get acquainted with relevant academic theories, frameworks and practices concerning CRM and agile development, and use them to generate a modified CRM project strategy to support the successful execution of the case company’s, Process Vision Oy, CRM implementation project. The empirical CRM system implementation project was conducted simultaneously with writing this thesis. Its theoretical findings could be transferred into practice through active participation in the CRM system development and deployment work. The project’s main goal was to produce and take into use a functioning CRM system. The goal was met, since at the time of printing this thesis the first system release was successfully published to its users at Process Vision’s marketing and sales departments. The key success elements in the CRM project were cyclic, iterative system development, customer oriented approach, user inclusion and flexible project management. Implying agile development practices ensured being able to quickly respond to changes arising during the progress of the CRM project. Throughout modelling of the core sales process formed a strong basis, on which the CRM system’s operational and analytical functionalities were built. End users were included in the initial specification of system requirements and they provided feedback on the system’s usage. To conclude, the chosen theoretical CRM roadmaps and agile development practices proved as beneficial in the successful planning and execution of the agile CRM system implementation project at Process Vision.
Resumo:
Työajan seuranta ja kohdistaminen oikeisiin kustannuslajeihin on yrityksen suorituskyvyn ja kasvun kannalta usein välttämättömyys. Tässä työssä tutkitaan mobiiliteknologioiden mahdollisuuksia ja soveltuvuutta tuottaa palveluita työajan hallinnointiin, valitaan sopiva arkkitehtuuri ja kehitetään Java ME –teknologialla prototyyppi, joka on helposti integroitavissa yrityksen nykyisiin palvelinpuolen järjestelmiin ja tietokantoihin. Työn sovellusosuudessa kuvataan prototyypin ohjelmoinnissa käytetyt työkalut, menetelmät, ongelmakohdat sekä niiden ratkaisut. Suunnitelluissa käyttötapauksissa tapahtumatiedot syötetään manuaalisesti puhelimen käyttöliittymän kautta tai automatisoidummin kerätään kustannuskohdistetietoa työkohteisiin sijoitetuista NFC-tageista. Työaikaleimaamista testattiin emulaattorilla ja oikealla matkapuhelimella. Lopputuloksena asiakkaan työajanhallinnan tapahtumat siirtyvät langattomasti ja reaaliaikaisesti yrityksen webpalvelimelle JSON-formaatissa.
Resumo:
Työn tavoitteena oli suunnitella ja toteuttaa uudistettu versio Lappeenrannan teknillisen yliopiston kirjaston käyttämästä WWW-pohjaisesta julkaisurekisteriohjelmasta. Työssä käsitellään muuttuneita tarpeita ja syitä, jotka johtivat uuden ohjelmiston toteuttamiseen. Ohjelmiston uuteen versioon toteutettiin uusi ohjelmistoarkkitehtuuri, joka perustuu eri toiminnot toteuttaviin komponentteihin rajapintoineen. Tässä raportissa kuvataan ohjelmistoon liittyvät vaatimukset, projektin toteutukseen käytetyt tekniset ratkaisut sekä ohjelmiston toiminnallisuus käyttöliittymäkuvineen. Lisäksi käsitellään Ajax-tekniikoiden hyödyntämistä ohjelmiston käyttöliittymän vuorovaikutteisuuden parantamiseen. Lopuksi käsitellään toteutunutta projektia ja lopputuloksen merkitystä.
Resumo:
Along with the increasing in demand of mobile computing, Push Notification (PN) is widely used in mobile phones and other devices. PN allows the developer to send messages to the end users even when the client application is not running at the moment. This solves the problem produced by non-supported multi-tasking feature as well as saving battery life. Microsoft Push Notification Service (MPNS) is one solution to use PNs in Windows Phones. The thesis gives the developers an idea of how to use PNs by introducing MPNS, comparing MPNS with other Push Notification Services, usage of different PN types analysis, and PN simulation system implementation.
Resumo:
The main objective of this master’s thesis is to provide a comprehensive view to cloud computing and SaaS, and analyze how well CADM, a unit of Capgemini Finland Ltd., would fit to the cloud-based SaaS business. Another objective for this thesis is to investigate how public clouds would fit for CADM as a delivery model, if they would provide SaaS applications to their customers. This master’s thesis is executed by investigating characteristics of cloud computing and SaaS especially from application provider point of view. This is done by exploring what kinds of researches and analysis there have been done regarding these two phenomena during past few years. Then CADM’s current business model and operations are analyzed from SaaS’s and public cloud’s perspective. This analyzing part is conducted by using SWOT analysis which is widely used analytical tool when observing company’s strategic position and when figuring out possibilities how to improve company’s operations. The conducted analysis and observations reveals that CADM should pursue SaaS business as it could provide remarkable advantages and strengthen their position in current markets. However, pure SaaS model would not be the optimal solution for CADM because they do not have own product which could be transformed to SaaS model, and they lack of Infrastructure Management ability. Also public cloud would not be the most suitable delivery model for them if providing SaaS services. The main observation of this thesis is that CADM should adopt the SaaS model via Capgemini Immediate offering.