Fischer-Tropsch Slurry Bubble Column Reactor Modeling

The literature part of the work reviews overall Fischer-Tropsch process, Fischer-Tropsch reactors and catalysts. Fundamentals of Fischer-Tropsch modeling are also presented. The emphasis is on the reactor unit. Comparison of the reactors and the catalysts is carried out to choose the suitable reactor setup for the modeling work. The effects of the operation conditions are also investigated. Slurry bubble column reactor model operating with cobalt catalyst is developed by taking into account the mass transfer of the reacting components (CO and H2) and the consumption of the reactants in the liquid phase. The effect of hydrostatic pressure and the change in total mole flow rate in gas phase are taken into account in calculation of the solubilities. The hydrodynamics, reaction kinetics and product composition are determined according to literature. The cooling system and furthermore the required heat transfer area and number of cooling tubes are also determined. The model is implemented in Matlab software. Commercial scale reactor setup is modeled and the behavior of the model is investigated. The possible inaccuraries are evaluated and the suggestions for the future work are presented. The model is also integrated to Aspen Plus process simulation software, which enables the usage of the model in more extensive Fischer-Tropsch process simulations. Commercial scale reactor of diameter of 7 m and height of 30 m was modeled. The capacity of the reactor was calculated to be about 9 800 barrels/day with CO conversion of 75 %. The behavior of the model was realistic and results were in the right range. The highest uncertainty to model was estimated to be caused by the determination of the kinetic rate.

Modeling of Gold Cyanidation

The chemistry of gold dissolution in alkaline cyanide solution has continually received attention and new rate equations expressing the gold leaching are still developed. The effect of leaching parameters on gold gold cyanidation is studied in this work in order to optimize the leaching process. A gold leaching model, based on the well-known shrinking-core model, is presented in this work. It is proposed that the reaction takes place at the reacting particle surface which is continuously reduced as the reaction proceeds. The model parameters are estimated by comparing experimental data and simulations. The experimental data used in this work was obtained from Ling et al. (1996) and de Andrade Lima and Hodouin (2005). Two different rate equations, where the unreacted amount of gold is considered in one equation, are investigated. In this work, it is presented that the reaction at the surface is the rate controlling step since there is no internal diffusion limitation. The model considering the effect of non-reacting gold shows that the reaction orders are consistent with the experimental observations reported by Ling et al. (1996) and de Andrade Lima and Hodouin (2005). However, it should be noted that the model obtained in this work is based on assumptions of no side reactions, no solid-liquid mass transfer resistances and no effect from temperature.

Offering planning process development: Bridging the Offering Gaps and Consolidating Top Priority Needs in Product Offering

The aim of this Thesis is to study how to manage the front-end of the offering planning process. This includes actual process development and methods to gather and analyze information to achieve the best outcome in customer oriented product offering. Study is carried out in two parts: theoretical part and company related part. Theoretical framework is created introducing different types of approaches to manage product planning processes. Products are seen as platforms and they are broken down to subsystems to show different parts of the development. With the help of the matrix-based approaches product platform related information is gathered and analyzed. In this kind of analysis business/market drivers and cus-tomer/competitor information are connected with product subsystems. This gives possibilities to study product gaps/needs and possible future ideas/scenarios in different customer segments. Company related part consists of offering planning process development in real company environment. Process formation includes documents and tools that guide planning from the information gathering to the prioritization and decision making.

Product Data Managemet as a Key Success Factor in After Sales Business

The objective of this master’s thesis is to define Larox´s Product Data present state and future development needs from after sales point of view. In particular the object was to investigate after sales needs, which data related to products need to be managed by using Product Data Management. Empirical material of thesis was collected mainly through interviews, benchmark visits, and personal experience. Among the interviewees were internal stakeholders who are closely related to the product process, as well as external stakeholders. Interviews revealed that each stakeholder group has deviating needs for product data management and that at present all the needs are not met to take the best possible way. The main requirement was availability of up-to-date information, which plays a key role in after sales business. At the end of study is concentrated to find development targets at Larox, especially from after sales point of view. In addition, consideration of how the product data management advantages can utilized in making internal processes more efficient. Development needs are collected together as project descriptions, whose headings are shown at the end of the study.

Creating and implementing a financial management process to an international company

The objectives of this thesis areto identify the best elements from Information Technology Infrastructure Library financial management for an international company. The elements need to be customized to fit existing elements and the thesis needs to provide implementation proposal. The new IT financial management needs to improve cost visibility and bring benefits to the company. In order to find the best elements for IT financial management, there needs to be a research to discover the companys business needs. The ITIL library is used to find answers and solutions to the companys issues in IT financial management. Other IT frameworks can and will be used as well, if they are able to work with ITIL model. ITIL consists from budgeting, accounting and charging in IT financial management, which all needs to be investigated. In addition more ITIL elements such as contract management and supplier management can be used, in order to make IT financial management work better.

Study and modeling of the desintegration kinetics of coated paper

The disintegration of recovered paper is the first operation in the preparation of recycled pulp. It is known that the defibering process follows a first order kinetics from which it is possible to obtain the disintegration kinetic constant (KD) by means of different ways. The disintegration constant can be obtained from the Somerville index results (%lsv and from the dissipated energy per volume unit (Ss). The %slv is related to the quantity of non-defibrated paper, as a measure of the non-disintegrated fiber residual (percentage of flakes), which is expressed in disintegration time units. In this work, disintegration kinetics from recycled coated paper has been evaluated, working at 20 revise rotor speed and for different fiber consistency (6, 8, 10, 12 and 14%). The results showed that the values of experimental disintegration kinetic constant, Ko, through the analysis of Somerville index, as function of time. Increased, the disintegration time was drastically reduced. The calculation of the disintegration kinetic constant (modelled Ko), extracted from the Rayleigh’s dissipation function, showed a good correlation with the experimental values using the evolution of the Somerville index or with the dissipated energy

Developing an Improved System for Allocating Support Unit Costs to Business Units

The objective of this study is to develop an improved support unit cost allocation system for a medium-sized technology company, and to examine which options for overhead cost accounting exist. The study begins with presenting the terminology and methods associated with overhead cost accounting and responsibility accounting. Also the most common challenges and resulting benefits of overhead cost allocation system development are brought up. As one research method two case studies were conducted for benchmarking purposes. These external cases are compared with the principal company’s cost allocation system and reflected against the theoretical background. In the empirical section interviews were used as the primary source of information alongside self studying principal company’s old cost allocation method. Interviews revealed the main weaknesses of the old system and proposals for a new one, which were utilized in setting targets for developing the new system. As a result of the development process an improved support unit cost allocation system was realized for year 2009. The new system is able to handle support unit costs in more detail enhancing the transparency and fairness of resulting cost allocations. Parts of support unit costs are now seen as business units’ own costs rather than group-level overhead. Also recommendations for further development are made after analyzing how well the targets were reached.

Customer reference marketing in a business to business context

This study focuses on the phenomenon of customer reference marketing in a business tobusiness (B to B) context. Although customer references are generally considered an important marketing and sales tool, the academic literature has paid surprisingly little attention to the phenomenon. The study suggests that customer references could be viewed as important marketing assets for industrial suppliers, and the ability to build, manage and leverage customer reference portfolios systematically constitutes a relevant marketing capability. The role of customer references is examined in the context of the industrial suppliers' shift towards a solution and project orientation and in the light of the on going changes in the project business. Suppliers in several industry sectors are undergoing a change from traditional equipment manufacturing towards project and solution oriented business. It is argued in this thesis that the high complexity, the project oriented nature and the intangible service elements that characterise many contemporary B to B offerings further increase the role of customer references. The study proposes three mechanisms of customer reference marketing: status transfer, validation through testimonials and the demonstration of experience and prior performance. The study was conducted in the context of Finnish B to B process technology and information technology companies. The empirical data comprises 38 interviews with managers of four case companies, 165 customer reference descriptions gathered from six case companies' Web sites, as well as company internal material. The findings from the case studies show that customer references have various external and internal functions that contribute to the growth and performance of B to B firms. Externally, customer references bring status transfer effects from reputable customers, concretise and demonstrate complex solutions, and provide indirect evidence of experience, previous performance, technological functionality and delivered customer value. They can also be leveraged internally to facilitate organisational learning and training, advance offering development, and motivate personnel. Major reference projects create new business opportunities and can be used as a vehicle for strategic change. The findings of the study shed light on the on going changing orientations in the project business environment, increase understanding of the variety of ways in which customer references can be deployed as marketing assets, and provide a framework of the relevant tasks and activities related to building, managing and leveraging a firm's customer reference portfolio. The findings contribute to the industrial marketing research, to the literature on marketing assets and capabilities and to the literature on projects and solutions. The proposed functions and mechanisms of customer reference marketing bring a more thorough and structured understanding about the essence and characteristics of the phenomenon and give a wide ranging view of the role of customer references as marketing assets for B to B firms. The study suggests several managerial implications for industrial suppliers in order to systematise customer reference marketing efforts.

Kinetic modeling of the biosorption of Cd2+ ions from aqueous solutions onto Eichhornia crassipes roots using potentiometry: low-cost alternative to conventional methods

This work presents the use of potentiometric measurements for kinetic studies of biosorption of Cd2+ ions from aqueous solutions on Eichhornia crassipes roots. The open circuit potential of the Cd/Cd2+ electrode of the first kind was measured during the bioadsorption process. The amount of Cd2+ ions accumulated was determined in real time. The data were fit to different models, with the pseudo-second-order model proving to be the best in describing the data. The advantages and limitations of the methodology proposed relative to the traditional method are discussed.

Business intelligence –järjestelmä integraation tukena kansainvälisessä yrityksessä

Business intelligencellä tarkoitetaan liiketoimintatiedon hallintaan liittyviä prosesseja ja tekniikoita. Se pitää sisällään tiedon keräämiseen, tallentamiseen, analysointiin ja jakamiseen käytettyt tuotteet, tekniikat ja prosessit, joiden tavoitteena on auttaa yrityksen työntekijöitä liiketoimintaan liittyvässä päätöksenteossa. Tutkimuksen tavoitteena on tutkia uuden yritysryhmän laajuisen BI-tietojärjestelmän suunnitteluun ja käyttöönotoon liittyviä seikkoja ja luoda valmiudet BI-tietojärjestelmän kehitys- ja käyttöönottoprojektin kohdeyrityksessä, jonka toimiala on kansainvälinen terveydenhoitoalan tukkuliiketoiminta. Uuden BI-järjestelmän halutaan tukeva yritysryhmän yritysten välistä integraatiota ja tehostavan tiedonhakuun ja analysointiin liittyviä prosesseja. Tutkimus toteutettiin konstruktiivisena tutkimuksena, joka kattaa kohdeyrityksen IT-arkkitehtuurin, tietosisällön, prosessit ja organisaation raportoinnin kannalta. Lisäksi työssä suoritettiin ohjelmistovertailu kahden markkinoilla toimivan merkittävän ohjelmistotalon BI-tuotteiden välillä. Työssä havaittiin, että BI-projekti on laaja-alainen ja suuri hanke, joka ulottuu läpi koko organisaation. BI-ohjelmiston tehokas hyödyntäminen asettaa vaatimuksia erityisesti taustajärjestelmien tiedon huolelliseen mallintamiseen liittyen. Työssä saatiin pilotoinnin kautta käytännön kokemuksia uudesta järjestelmästä ja sen tarjoamista mahdollisuuksista kohdeyrityksessä.

Customer Driven Order-to-Delivery Process

This thesis was made for a large forest industry company’s business segment. The purpose of the study was to improve the performance of the order-to-delivery process of the business segment. The study proceeded in three phases. The first phase was to define customer expectations in the market. The second phase was to analyse the performance and the operations of the order-to-delivery process, and to define any challenges or problems in serving the customers. The third and final phase was improving the performance of the order-to-delivery process, within the scope defined by the first two phases. The analysis showed that the delivery reliability is an essential but a challenging issue in the case company’s markets. On delivery reliability standpoint, the most challenging factors were the detected information flow distortions within the company as well as in the whole supply chain, and the lack of horizontal control over the multi-stage process.

Developing co-operation of business units – exploring synergies and a joint business model

The purpose of this study was to develop co-operation between business units of the company operating in graphic industry. The development was done by searching synergy opportunities between these business units. The final aim was to form a business model, which is based on co-operation of these business units.The literature review of this thesis examines synergies and especially the process concerning the search and implementation of synergies. Also the concept of business model and its components are examined. The research was done by using qualitative research method. The main data acquiring method to the empirical part was theme interviews. The data was analyzed using thematisation and content analysis.The results of the study include seven identified possible synergies and a business model, which is based on the co-operation of the business units. The synergy opportunities are evaluated and the implementation order of the synergies is suggested. The presented synergies create the base for the proposed business model.

Analysis of electricity distribution network operation business models and capitalization of control room functions with DMS

Electricity distribution network operation (NO) models are challenged as they are expected to continue to undergo changes during the coming decades in the fairly developed and regulated Nordic electricity market. Network asset managers are to adapt to competitive technoeconomical business models regarding the operation of increasingly intelligent distribution networks. Factors driving the changes for new business models within network operation include: increased investments in distributed automation (DA), regulative frameworks for annual profit limits and quality through outage cost, increasing end-customer demands, climatic changes and increasing use of data system tools, such as Distribution Management System (DMS). The doctoral thesis addresses the questions a) whether there exist conditions and qualifications for competitive markets within electricity distribution network operation and b) if so, identification of limitations and required business mechanisms. This doctoral thesis aims to provide an analytical business framework, primarily for electric utilities, for evaluation and development purposes of dedicated network operation models to meet future market dynamics within network operation. In the thesis, the generic build-up of a business model has been addressed through the use of the strategicbusiness hierarchy levels of mission, vision and strategy for definition of the strategic direction of the business followed by the planning, management and process execution levels of enterprisestrategy execution. Research questions within electricity distribution network operation are addressed at the specified hierarchy levels. The results of the research represent interdisciplinary findings in the areas of electrical engineering and production economics. The main scientific contributions include further development of the extended transaction cost economics (TCE) for government decisions within electricity networks and validation of the usability of the methodology for the electricity distribution industry. Moreover, DMS benefit evaluations in the thesis based on the outage cost calculations propose theoretical maximum benefits of DMS applications equalling roughly 25% of the annual outage costs and 10% of the respective operative costs in the case electric utility. Hence, the annual measurable theoretical benefits from the use of DMS applications are considerable. The theoretical results in the thesis are generally validated by surveys and questionnaires.

SME internationalisation from a network perspective : an empirical study on a Finnish-Greek business network

The study examines the internationalisation process of a contemporary SME firm and explores the impact of its business network on this development. The objective of the study is to understand SME internationalisation and its dynamics from a network perspective. The purpose of this research project is to describe and explore the development process of a firm and its business network by identifying the changes, critical events and influence factors that form this development. It is a qualitative case study, which focuses on a Finnish focal firm and its respective business network as it expands into the Greek market. It is a longitudinal research process, which covers a period of time from 1994 to 2004. The empirical study concentrates on the paper trading and converting business. The study builds on the network theory and the framework provided by Johanson and Mattsson's (1988) model on network internationalisation. The incremental internationalisation theories and network theories form the theoretical focus. The research project is organised according to a process view. The focal firm evolves from a domestically-oriented small subsidiary into an internationally experienced company, which has activities in several market areas and numerous business networks in various market segments and product categories. The findings illustrate the importance of both the domestic and foreign business network context in a firm's internationalisation process. The results of the study suggest theoretical modifications on a firm's internationalisation process by broadening the perspective and incorporating the strategic context of a firm. The findings suggest that internationalisation process is a non-linear process, which does not have a deterministic order in its development. The findings emphasise the significance of relational networks, both managerial and entrepreneurial, for establishing position in foreign markets. It implies that a firm's evolution is significantly influenced by its business network and by critical events. Business networks gain coherence due to common goals and they use accumulated capabilities to exploit market opportunities. The business network sets constraints and provides opportunities, which makes the related decision making strategically important. The firm co-evolves with its business network. The research project provides an instrumental case study with a description of an SME internationalisation process. It contributes to existing knowledge by illustrating dynamics in an international business network and by pinpointing the importance of suppliers, customers, partners, ownerships and competition to the internationalisation process.

The Process of Greening Cycle as Method of Operative Environmental

The structural change of society from product-based business to service- and further to need-based business has caused the fact that work for environmental issues has spread from conventional factories and environmentally harmful production to concern services and offices as well. Almost every company has an office, so a relatively small environmental burden caused by an individual office grows remarkable already at the state level and globally even more. Motivation to work for environmental issues in an individual office could be challenging even without the fact that wasted environmental impacts bound also wasted costs. Besides cost savings, a concretely greener image of a company has its value in the B2Cas well as in the B2B-field. Consumers and clients are more and more conscious of environmental issues and demand concrete actions instead of speeches, good thoughts and meaningless certifications. Internal work for environmental issues at a strategy level is not sufficient, so operational environmental management is needed for changing old practices. This research is about the effects of operative environmental management on the greening process of an office-based business. The research is outlined to concern the operative work in the office including field sales. Target was to concretely lower the environmental impacts of Lyreco Finland and to find cost savings directly by changing the operative practices in the office and also indirectly by affecting the level of environmental knowledge of the personnel. During the greening process, the aim was also to create concrete arguments for marketing as well. The circle of greening process, which was especially created for this diploma work, was used as a method. The circle divides a year to themes and sections separated by factors of environmental impacts. Separation is based on Brett Wills’ thoughts of seven green wastes (Wills, Brett. The Green Intensions. 2009) and follows it uneasily. The circle aimed at ensuring evolutionary growth of knowledge instead of being revolutionary in the changing process. Committing personnel to the process from its start by asking ideas from them and giving them clear directions was an important part of the research of operative management. Because of working from distance, communication with personnel was operated by frequent training days and weekly greening notes via emails and intranet. Also availability for communication was an important task because of the telecommuting. Research results of this work show that operative environmental management in an officebased business today is mostly management of change. When the strategic environmental friendliness is taken into a concrete level, the most important individual factor is motivating the operating personnel. Research shows that evolutionary change is found being an efficient way to make a change. Also understanding one´s own impact on the environmental burden and on the whole greening process clearly motivates the personnel. Results show that in the operative realization of the greening process, clear directions of new working practices, being as concrete as possible, and committing personnel to follow them make the process more effective. The operative environmental management and the cycle of the greening process decrease the environmental burden and save costs. The concrete results could be used as believable arguments in marketing and therefore exploited in communication with interest groups. Commitment of the management is also one of the key factors of success in the greening process. In this research, changes in the business field by a company trade took the focus of the management away from the greening process and made the process more inefficient by decreasing the amount of training days. The circle of greening process will be used as a tool in the future, as well, and therefore it will help observe environmental impacts of a company and increase sustainable development. Commitment of management to the evolutionary environmental work helps the operating personnel lower environmental impacts, decrease costs and build a concretely greener image.