Balanced Scorecard (BSC) TE-keskusten strategisessa ohjauksessa

Kauppa- ja teollisuusministeriö yhdessä työministeriön ja maa- ja metsätalousministeriön kanssa ohjaavat työvoima- ja elinkeinokeskuksia (TE –keskuksia). Tutkimuksen tavoitteena on kuvata ohjausprosessi, jonka avulla ministeriöt ohjaavat TE –keskuksia sekä analysoida TE –keskusten ohjauksen työkalua, Balanced Scorecardia, ja antaa sitä koskevia kehitysehdotuksia. Tutkimusmetodologia on toiminta-analyyttinen. Teoreettinen viitekehys koostuu tulosohjauksen teoriasta ja Balanced Scorecardin teoriasta. Empiirinen aineisto kerätään tekemällä haastatteluja. Tärkeimmät TE –keskusten Balanced Scorecardia koskevat kehitysehdotukset koskevat mittaristoa ja raportointia. Mittaristossa suurin kehittämistarve on TE -keskusten yhteisillä mittareilla sekä mittariston näkökulmien syy-seuraussuhteiden selventämisellä. Jotta Balanced Scorecard toimisi parhaalla mahdollisella tavalla, on henkilöstön koulutus erityisen tärkeää.

Performance Evaluation of Imaging Systems

Imaging systems have developed latest years and developing is still continuing following years. Manufacturers of imaging systems give promises for the quality of the performance of imaging systems to advertise their products. Promises for the quality of the performance are often so good that they will not be tested in normal usage. The main target in this research is to evaluate the quality of the performance of two imaging systems: Scanner and CCD color camera. Optical measurement procedures were planned to evaluate the quality of imaging performances. Other target in this research is to evaluate calibration programs for the camera and the scanner. Measuring targets had to choose to evaluate the quality of imaging performances. Manufacturers have given definitions for targets. The third task in this research is to evaluate and consider how good measuring targets are.

Diffusion of Administrative Innovation: TQM Implementation and Effectiveness in a Global

The main objective of this dissertation is to create new knowledge on an administrative innovation, its adoption, diffusion and finally its effectiveness. In this dissertation the administrative innovation is approached through a widely utilized management philosophy, namely the total quality management (TQM) strategy. TQM operationalizes a self-assessment procedure, which is based on continual improvement principles and measuring the improvements. This dissertation also captures the theme of change management as it analyzes the adoption and diffusion of the administrative innovation. It identifies innovation characteristics as well as organisational and individual factors explaining the adoption and implementation. As a special feature, this study also explores the effectiveness of the innovation based on objective data. For studying the administrative innovation (TQM model), a multinational Case Company provides a versatile ground for a deep, longitudinal analysis. The Case Company started the adoption systematically in the mid 1980s in some of its units. As part of their strategic planning today, the procedure is in use throughout the entire global company. The empirical story begins from the innovation adoption decision that was made in the Case Company over 22 years ago. In order to be able to capture the right atmosphere and backgrounds leading to the adoption decision, key informants from that time were interviewed, since the main target was to clarify the dynamics of how an administrative innovation develops. In addition, archival material was collected and studied, available memos and data relating to the innovation, innovation adoption and later to the implementation contained altogether 20500 pages of documents. A survey was furthermore conducted at the end of 2006 focusing on questions related to the innovation, organization and leadership characteristics and the response rate totalled up to 54%. For measuring the effectiveness of the innovation implementation, the needed longitudinal objective performance data was collected. This data included the profit unit level experience of TQM, the development of the self assessment scores per profit unit and performance data per profit unit measured with profitability, productivity and customer satisfaction. The data covered the years 1995-2006. As a result, the prerequisites for the successful adoption of an administrative innovation were defined, such as the top management involvement, support of the change agents and effective tools for implementation and measurement. The factors with the greatest effect on the depth of the implementation were the timing of the adoption and formalization. The results also indicated that the TQM model does have an effect on the company performance measured with profitability, productivity and customer satisfaction. Consequently this thesis contributes to the present literature (i) by taking into its scope an administrative innovation and focusing on the whole innovation implementation process, from the adoption, through diffusion until its consequences, (ii) because the studied factors with an effect on the innovation adoption and diffusion are multifaceted and grouped into individual, organizational and environmental factors, and a strong emphasis is put on the role of the individual change agents and (iii) by measuring the depth and consistency of the administrative innovation. This deep analysis was possible due to the availability of longitudinal data with triangulation possibilities.

Diversification and its reflections on profitability - strategic change in pulp and paper industry in the years 1996 and 2006

The purpose of the thesis was to analyze diversification in pulp and paper industry (PPI), which is an industry facing enormous strategic challenges as many of the basic parameters of its operational environment are rapidly changing. The objective was to explore, how PPI companies have reacted to these changes by adjusting their strategies in terms of diversification and how the adjustments have affected their profitability. The study was statistical in nature. The results indicate that PPI companies in deed had reduced the degree of unrelated and related diversification , but the positive performance implications of the changes were debatable. In light of the data used in the study lower level of diversification did not lead to better profitability, in fact, the companies with the highest level of diversification had the best profitability. By contrast, reducing the level of unrelated diversification improved the profitability development; whereas reducing the level of related diversification deteriorated the profitability of the company. The results were not statistically significant and they cannot be generalized outside the data of the study.

Performance benchmarking and incentive regulation – considerations of directing signals for electricity distribution companies

After the restructuring process of the power supply industry, which for instance in Finland took place in the mid-1990s, free competition was introduced for the production and sale of electricity. Nevertheless, natural monopolies are found to be the most efficient form of production in the transmission and distribution of electricity, and therefore such companies remained franchised monopolies. To prevent the misuse of the monopoly position and to guarantee the rights of the customers, regulation of these monopoly companies is required. One of the main objectives of the restructuring process has been to increase the cost efficiency of the industry. Simultaneously, demands for the service quality are increasing. Therefore, many regulatory frameworks are being, or have been, reshaped so that companies are provided with stronger incentives for efficiency and quality improvements. Performance benchmarking has in many cases a central role in the practical implementation of such incentive schemes. Economic regulation with performance benchmarking attached to it provides companies with directing signals that tend to affect their investment and maintenance strategies. Since the asset lifetimes in the electricity distribution are typically many decades, investment decisions have far-reaching technical and economic effects. This doctoral thesis addresses the directing signals of incentive regulation and performance benchmarking in the field of electricity distribution. The theory of efficiency measurement and the most common regulation models are presented. The chief contributions of this work are (1) a new kind of analysis of the regulatory framework, so that the actual directing signals of the regulation and benchmarking for the electricity distribution companies are evaluated, (2) developing the methodology and a software tool for analysing the directing signals of the regulation and benchmarking in the electricity distribution sector, and (3) analysing the real-life regulatory frameworks by the developed methodology and further develop regulation model from the viewpoint of the directing signals. The results of this study have played a key role in the development of the Finnish regulatory model.

Governance mode vs. governance fit: Performance implications of make-or-ally choices for product innovation in the worldwide aircraft industry, 1942-2000

We examine the impact of governance mode and governance fit on performance in make-or-ally decisions. We argue that while horizontal collaboration and autonomous governance have direct and countervailing performance implications, the alignment of make-or-ally choices with the focal firm's resource endowment and the activity's resource requirements leads to better performance. Data on the aircraft industry show that relative to aircraft developed autonomously, collaborative aircraft exhibit greater sales but require longer time-to-market. However, governance fit increases unit sales and reduces time-to-market. We contribute to the alliance and economic organization literatures. (Copyright © 2013 John Wiley & Sons, Ltd.)

Performance Improvement of Centrifugal Compressor Stage with Pinched Geometry or Vaned Diffuser

Centrifugal compressors are widely used for example in refrigeration processes, the oil and gas industry, superchargers, and waste water treatment. In this work, five different vaneless diffusers and six different vaned diffusers are investigated numerically. The vaneless diffusers vary only by their diffuser width, so that four of the geometries have pinch implemented to them. Pinch means a decrease in the diffuser width. Four of the vaned diffusers have the same vane turning angle and a different number of vanes, and two have different vane turning angles. The flow solver used to solve the flow fields is Finflo, which is a Navier-Stokes solver. All the cases are modeled with the Chien's k – έ- turbulence model, and selected cases are modeled also with the k – ώ-SST turbulence model. All five vaneless diffusers and three vaned diffusers are investigated also experimentally. For each construction, the compressor operating map is measured according to relevant standards. In addition to this, the flow fields before and after the diffuser are measured with static and total pressure, flow angle and total temperature measurements. When comparing the computational results to the measured results, it is evident that the k – ώ-SST turbulence model predicts the flow fields better. The simulation results indicate that it is possible to improve the efficiency with the pinch, and according to the numerical results, the two best geometries are the ones with most pinch at the shroud. These geometries have approximately 4 percentage points higher efficiency than the unpinched vaneless diffusers. The hub pinch does not seem to have any major benefits. In general, the pinches make the flow fields before and after the diffuser more uniform. The pinch also seems to improve the impeller efficiency. This is down to two reasons. The major reason is that the pinch decreases the size of slow flow and possible backflow region located near the shroud after the impeller. Secondly, the pinches decrease the flow velocity in the tip clearance, leading to a smaller tip leakage flow and therefore slightly better impeller efficiency. Also some of the vaned diffusers improve the efficiency, the increment being 1...3 percentage points, when compared to the vaneless unpinched geometry. The measurement results confirm that the pinch is beneficial to the performance of the compressor. The flow fields are more uniform with the pinched cases, and the slow flow regions are smaller. The peak efficiency is approximately 2 percentage points and the design point efficiency approximately 4 percentage points higher with the pinched geometries than with the un- pinched geometry. According to the measurements, the two best geometries are the ones with the most pinch at the shroud, the case with the pinch only at the shroud being slightly better of the two. The vaned diffusers also have better efficiency than the vaneless unpinched geometries. However, the pinched cases have even better efficiencies. The vaned diffusers narrow the operating range considerably, whilst the pinch has no significant effect on the operating range.

Performance of high power fibre laser cutting of thick-section steel and mediumsection aluminium

Cutting of thick section stainless steel and mild steel, and medium section aluminium using the high power ytterbium fibre laser has been experimentally investigated in this study. Theoretical models of the laser power requirement for cutting of a metal workpiece and the melt removal rate were also developed. The calculated laser power requirement was correlated to the laser power used for the cutting of 10 mm stainless steel workpiece and 15 mm mild steel workpiece using the ytterbium fibre laser and the CO2 laser. Nitrogen assist gas was used for cutting of stainless steel and oxygen was used for mild steel cutting. It was found that the incident laser power required for cutting at a given cutting speed was lower for fibre laser cutting than for CO2 laser cutting indicating a higher absorptivity of the fibre laser beam by the workpiece and higher melting efficiency for the fibre laser beam than for the CO2 laser beam. The difficulty in achieving an efficient melt removal during high speed cutting of the 15 mmmild steel workpiece with oxygen assist gas using the ytterbium fibre laser can be attributed to the high melting efficiency of the ytterbium fibre laser. The calculated melt flow velocity and melt film thickness correlated well with the location of the boundary layer separation point on the 10 mm stainless steel cut edges. An increase in the melt film thickness caused by deceleration of the melt particles in the boundary layer by the viscous shear forces results in the flow separation. The melt flow velocity increases with an increase in assist gas pressure and cut kerf width resulting in a reduction in the melt film thickness and the boundary layer separation point moves closer to the bottom cut edge. The cut edge quality was examined by visual inspection of the cut samples and measurement of the cut kerf width, boundary layer separation point, cut edge squareness (perpendicularity) deviation, and cut edge surface roughness as output quality factors. Different regions of cut edge quality in 10 mm stainless steel and 4 mm aluminium workpieces were defined for different combinations of cutting speed and laserpower.Optimization of processing parameters for a high cut edge quality in 10 mmstainless steel was demonstrated

Hankintatoimen suorituskyvyn mittaaminen

Hankintatoimen merkitys yritysten kannattavuudelle on huomioitu viime vuosina aiempaa enemmän. Hankintatoimen rooli on muuttunut strategi-sen toiminnon suuntaan. Myös hankintatoimen suorituskyvyn johtamiseen on alettu kiinnittää enemmän huomiota. Tutkimuksen tavoitteena on suunnitella ja valita sopivat mittarit hankintatoimen suorituskyvyn mittaamista varten. Tutkimuksen toisena tavoitteena on arvioida sitä, mitkä valituista mittareista mittaavat organisaation aineetonta pääomaa. Tutkimus toteutetaan case-tutkimuksena. Aineiston keräämiseen ja ratkaisun toteuttamiseen käytetään kvalitatiivista tutkimusmenetelmää ja konstruktiivista tutkimus-otetta. Tutkimuksessa sovellettiin Balanced Scorecard -mittariston toteutuspro-sessia. Valitut mittarit ryhmiteltiin neljän näkökulman mukaisesti. Mittaris-toa ja näkökulmien soveltuvuutta tulee arvioida säännöllisesti käyttöönoton jälkeen. Aineettoman pääoman merkityksestä hankintatoimessa tarvitaan edelleen lisätutkimusta.

Osaamisen johtaminen tietohallintopalveluita tarjoavan organisaation suorituskyvyn kehittämisessä

Tässä diplomityössä tutkitaan osaamisen johtamisen järjestelmää strategisesta näkö-kulmasta tietohallintopalveluita tuottavassa organisaatiossa. Tutkimuksen tarkoitukse-na oli kehittää osaamisen johtamisen kokonaisuutta kohdeorganisaation suorituskyvyn kehittämiseksi. Tutkimuksen lähtökohtana ovat organisaation arvot, missio ja visio sekä näiden kautta rakentuva organisaation osaamisen strategia. Osaamisen strategian näkökulmasta tarkastellaan asiantuntijuutta, osaamisen johtamista ja organisaation ydinosaamisia. Teoreettisesta näkökulmasta tutkitaan myös verkostoitumista ja oppi-misen verkostomallin hyödyntämismahdollisuuksia kohdeorganisaatiossa. Empiirinen aineisto kerättiin laadullisella teemahaastattelulla. Tutkimuksessa saatiin selkeä kuva kohdeorganisaation osaamisen johtamisen kokonai-suudesta. Verkostoituminen ja verkostomainen työskentely ovat kohdeorganisaatiossa erittäin suuressa roolissa, joten oppimisen verkostomallia voitaisiin hyödyntää organi-saatiossa tehokkaasti. Tämä edellyttää kuitenkin verkoston johtamista ja tavoitteellista osallistumista verkostoihin sekä asetettujen tavoitteiden mittaamista.

Network effects: Scale development and implications for new product performance

More and more innovations currently being commercialized exhibit network effects, in other words, the value of using the product increases as more and more people use the same or compatible products. Although this phenomenon has been the subject of much theoretical debate in economics, marketing researchers have been slow to respond to the growing importance of network effects in new product success. Despite an increase in interest in recent years, there is no comprehensive view on the phenomenon and, therefore, there is currently incomplete understanding of the dimensions it incorporates. Furthermore, there is wide dispersion in operationalization, in other words, the measurement of network effects, and currently available approaches have various shortcomings that limit their applicability, especially in marketing research. Consequently, little is known today about how these products fare on the marketplace and how they should be introduced in order to maximize their chances of success. Hence, the motivation for this study was driven by the need to increase our knowledge and understanding of the nature of network effects as a phenomenon, and of their role in the commercial success of new products. This thesis consists of two parts. The first part comprises a theoretical overview of the relevant literature, and presents the conclusions of the entire study. The second part comprises five complementary, empirical research publications. Quantitative research methods and two sets of quantitative data are utilized. The results of the study suggest that there is a need to update both the conceptualization and the operationalization of the phenomenon of network effects. Furthermore, there is a need for an augmented view on customers’ perceived value in the context of network effects, given that the nature of value composition has major implications for the viability of such products in the marketplace. The role of network effects in new product performance is not as straightforward as suggested in the existing theoretical literature. The overwhelming result of this study is that network effects do not directly influence product success, but rather enhance or suppress the influence of product introduction strategies. The major contribution of this study is in conceptualizing the phenomenon of network effects more comprehensively than has been attempted thus far. The study gives an augmented view of the nature of customer value in network markets, which helps in explaining why some products thrive on these markets whereas others never catch on. Second, the study discusses shortcomings in prior literature in the way it has operationalized network effects, suggesting that these limitations can be overcome in the research design. Third, the study provides some much-needed empirical evidence on how network effects, product introduction strategies, and new product performance are associated. In general terms, this thesis adds to our knowledge of how firms can successfully leverage network effects in product commercialization in order to improve market performance.

Role of Capabilities in Purchasing and Supply Management Performance

The objective of this thesis was to study the role of capabilities in purchasing and supply management. For the pre-understanding of the research topic, purchasing and supply management development and the multidimensional, unstructured and complex nature of purchasing and supply management performance was studied in literature review. In addition, a capability-based purchasing and supply management performance framework were researched and structured for the empirical research. Due to the unstructured nature of the research topic, the empirical research is three-pronged in this study including three different research methods: the Delphi method, semi-structured interview, and case research. As a result, the purchasing and supply management capability assessment tool was structured to measure current level of capabilities and impact of capabilities on purchasing and supply management performance. The final results indicate that capabilities are enablers of purchasing and supply management performance, and therefore critical to purchasing and supply performance.

Test of a microlysimeter for measurement of soil evaporation

Quantifying soil evaporation is required on studies of soil water balance and applications aiming to improve water use efficiency by crops. The performance of a microlysimeter (ML) to measure soil evaporation under irrigation and non-irrigation was evaluated. The MLs were constructed using PVC tubes, with dimensions of 100 mm inner diameter, 150 mm depth and 2.5 mm wall thickness. Four MLs were uniformly distributed on the soil surface of two weighing lysimeters conducted under bare soil, previously installed at Iapar, in Londrina, PR, Brazil. The lysimeters had 1.4 m width, 1.9 m length and 1.3 m depth and were conducted with and without irrigation. Evaporation measurements by MLs (E ML) were compared with measurements by lysimeters (E L) during four different periods in the year. Differences between E ML and E L were small either for low or high atmospheric demand and also for either irrigated or non-irrigated conditions, which indicates that the ML tested here is suitable for measurement of soil evaporation.

Strategic outsourcing of R&D: The location-specific advantages of India to the pharmaceutical industry

Companies are increasingly under pressure to be more efficient both in terms of costs and overall performance and thus, they seek new ways to develop their products and innovate. For pharmaceutical industry it can take several decades to launch a new drug to the markets. Since pharmaceutical industry is one of the most research-intensive industries, is outsourcing one way to enhance the R&D processes of such companies. It is said that outsourcing to offshore locations is vastly more challenging and complicated than any other exporting activity or inter-company relationship that has evoked a lot of discussion. By outsourcing strategically, companies must also thoroughly focus on transaction costs and core competences. Today, the suppliers are looked for beyond national boundaries and furthermore, the location of the outsourcing activity must also be thoroughly considered. Consequently, the purpose of this study is to analyze what is known of strategic outsourcing of pharmaceutical R&D to India. In order to meet the purpose of the study, this study tries to answer three sub-questions set to it: first, what is strategic outsourcing, second, why pharmaceutical companies utilize strategic outsourcing of R&D and last, why pharmaceutical companies select India as the location for outsourcing their R&D. The study is a qualitative study. The purpose of the study was approached by a literature review with systematic elements and sub-questions were analyzed through different relevant theories, such as theory of transaction costs, core competences and location advantages. Applicable academic journal articles were comprehensively included in the study. The data was collected from electronic journal article databases using key words and almost only peer-reviewed, as new as possible articles were included. Also both the reference list of the included articles and article recommendations from professionals generated more articles for inclusion. The data was analyzed through thematization that resulted in themes that illuminate the purpose of the study and sub-questions. As an outcome of the analysis, each of the theory chapters in the study represents one sub-question. The literature used in this study revealed that strategic outsourcing of R&D is increasingly used in pharmaceutical industry and the major motives to practice it has to do with lowering costs, accessing skilled labor, resources and knowledge and enhancing their quality while speeding up the introduction of new drugs. Mainly for the above-mentioned motives India is frequently chosen as the target location for pharma outsourcers. Still, the literature is somewhat incomplete in this complex phenomenon and more research is needed.

Developing the measurement and management of knowledge: applying the constructive research approach in a knowledge intensive service environment

Intellectual assets have attained continuous attention in the academic field, as they are vital sources of competitive advantage and organizational performance in the contemporary knowledge intensive business environment. Intellectual capital measurement is quite thoroughly addressed in the accounting literature. However, the purpose of the measurement is to support the management of intellectual assets, but the reciprocal relationship between measurement and management has not been comprehensively considered in the literature. The theoretical motivation for this study rose from this paradox, as in order to maximise the effectiveness of knowledge management the two initiatives need to be closely integrated. The research approach of this interventionist case study is constructive. The objective is to develop the case organization’s knowledge management and intellectual capital measurement in a way that they would be closely integrated and the measurement would support the management of intellectual assets. The case analysis provides valuable practical considerations about the integration and related issues as the case company is a knowledge intensive organization in which the know-how of the employees is the central competitive asset and therefore, the management and measurement of knowledge are essential for its future success. The results suggest that the case organization is confronting challenges in managing knowledge. In order to appropriately manage knowledge processes and control the related risks, support from intellectual capital measurement is required. However, challenges in measuring intellectual capital, especially knowledge, could be recognized in the organization. By reflecting the knowledge management situation and the constructed strategy map, a new intellectual measurement system was developed for the case organization. The construction of the system as well as its indicators can be perceived to contribute to the literature, emphasizing of the importance of properly considering the organization’s knowledge situation in developing an intellectual capital measurement system.