Ear and electrode effects reduce within-group variability in middle latency response amplitude measures

Objectives: To establish normative amplitude values for relative difference measurements of the middle latency response (MLR) in normal-hearing pediatrics and to determine if these measurements provided a significant reduction of within-group variability when compared to raw, absolute amplitude measures. A relative amplitude difference is defined in the present paper as the difference in Na-Pa amplitude between two electrodes (e.g. vertical bar Na-Pa at C3 minus Na-Pa at C4 vertical bar, or electrode effects) or between two ears (e.g. vertical bar Na-Pa on left ear stimulation minus Na-Pa on right ear stimulation vertical bar, or ear effects). In contrast, an absolute amplitude is defined as a single Na-Pa measurement made at one electrode for stimulation of one ear (e.g. Na-Pa measured at C3 on left ear stimulation). Design: Cross-sectional study. Study sample: 155 pediatrics with normal peripheral and central hearing, and no history of psychological, neurological, or learning disability issues. Results: Within-group variability was significantly smaller for relative differences when compared to absolute amplitude measures. Electrode effects showed significantly less variability than ear effects. Normative values for ear and electrode effects were reported. Conclusions: Relative differences may provide better utility in the clinical diagnosis of central auditory pathology in pediatrics when compared to absolute amplitude measures because these difference measures show significantly lower variability when examined across subjects.

ELECTROCHEMICAL OXIDATION OF THE HERBICIDE TEBUTHIURON USING DSA (R)-TYPE ELECTRODE

ELECTROCHEMICAL OXIDATION OF THE HERBICIDE TEBUTHIURON USING DSA (R)-TYPE ELECTRODE. Tebuthiuron (TBH) is a herbicide widely used in different cultures and known for its toxic effects. Electrochemical methods are promising for removing pollutants such as pesticides. This study showed the degradation of TBH using a DSA (R) anode operated at current densities of 50 to 200 mA cm(-2). Removal presented pseudo-first order kinetics while high-pressure liquid chromatography (UV detection) showed two peaks, ascribed to degradation intermediates. The maximum percentage of total organic carbon removed was 12.9%. Ion chromatography revealed that higher concentrations of nitrate and nitrite ions formed with increasing current density.

Flow injection analysis of free glycerol in biodiesel using a copper electrode as an amperometric detector

The main goal of this work was to develop a simple analytical method for quantification of glycerol based on the electrocatalytic oxidation of glycerol on the copper surface adapted in a flow injection system. Under optimal experimental conditions, the peak current response increases linearly with glycerol concentration over the range 60-3200 mg kg(-1) (equivalent to 3-160 mg L(-1) in solution). The repeatability of the electrode response in the flow injection analysis (FIA) configuration was evaluated as 5% (n = 10), and the detection limit of the method was estimated to be 5 mg kg(-1) in biodiesel (equivalent to 250 mu g L(-1) in solution) (S/N = 3). The sample throughput under optimised conditions was estimated to be 90 h(-1). Different types of biodiesel samples (B100), as in the types of vegetable oils or animal fats used to produce the fuels, were analysed (seven samples). The only sample pre-treatment used was an extraction of glycerol from the biodiesel sample containing a ratio of 5 mL of water to 250 mg of biodiesel. The proposed method improves the analytical parameters obtained by other electroanalytical methods for quantification of glycerol in biodiesel samples, and its accuracy was evaluated using a spike-and-recovery assay, where all the biodiesel samples used obtained admissible values according to the Association of Official Analytical Chemists. Crown Copyright (C) 2011 Published by Elsevier Ltd. All rights reserved.

Numerical simulation of drop impact and jet buckling problems using the eXtended Pom-Pom model

This work presents numerical simulations of two fluid flow problems involving moving free surfaces: the impacting drop and fluid jet buckling. The viscoelastic model used in these simulations is the eXtended Pom-Pom (XPP) model. To validate the code, numerical predictions of the drop impact problem for Newtonian and Oldroyd-B fluids are presented and compared with other methods. In particular, a benchmark on numerical simulations for a XPP drop impacting on a rigid plate is performed for a wide range of the relevant parameters. Finally, to provide an additional application of free surface flows of XPP fluids, the viscous jet buckling problem is simulated and discussed. (C) 2011 Elsevier B.V. All rights reserved.

EVALUATION OF THE POTENTIALITIES OF A CARBON NANOTUBES/SILICONE RUBBER COMPOSITE ELECTRODE IN THE DETERMINATION OF HYDROCHLOROTHIAZIDE

A multiwall carbon nanotube/silicone rubber (MWCNT/SR) composite electrode has been used for the determination of hydrochlorothiazide (HCTZ) in pharmaceutical formulations by differential pulse voltammetry (DPV). The electro-oxidation process was evaluated by cyclic voltammetry, from which it was observed that HCTZ presents an irreversible oxidation peak at 0.82 V vs. saturated calomel electrode (SCE) in the potential range from 0.5 to 1.1 V, in Britton-Robinson buffer pH 7.0 at MWCNT/SR. HCTZ was determined by DPV using a MWCNT/SR 70% (MWCNT, m/m) composite electrode after the optimization of the experimental parameters. The linear range was from 5.0 to 70.0 mu mol L-1, with a limit of detection (LOD) of 2.6 mu mol L-1. The HCTZ was determined in pharmaceutical formulations using the proposed composite electrode and the results agreed with those from the official high performance liquid chromatography (HPLC) method within 95% confidence level, according to the t-Student test.

Enzymatic Solid-Phase Reactor Based on Silica Organofunctionalized with p-Phenylenediamine for Electrochemical Detection of Phenolic Compounds

A new biomaterial, based on silica organofunctionalized with p-phenylenediamine (p-PDA) and the enzyme peroxidase, was used in the development of an enzymatic solid-phase reactor. The analytical techniques used in the characterization showed that the organic ligand was incorporated into the silica matrix. Thus, the silica modified with p-PDA allowed the incorporation of peroxidase by the electrostatic interaction between the carboxylic groups present in the enzyme molecules and the amino groups attached to the silica. The enzymatic solid-phase reactor was used for chemical oxidation of phenols in 1, 4-benzoquinone that was then detected by chronoamperometry. The system allowed the analysis of hydroquinone with a detection limit of 83.6 nmol L-1. Thus, the new material has potential in the determination of phenolic compounds river water samples.

Two-phase flow patterns and pressure drop inside horizontal tubes containing twisted-tape inserts

This paper presents an experimental study on two-phase flow patterns and pressure drop of R134a inside a 15.9 mm ID tube containing twisted-tape inserts. Experimental results were obtained in a horizontal test section for twisted-tape ratios of 3, 4, 9 and 14, mass velocities ranging from 75 to 250 kg/m(2) s and saturation temperatures of 5 and 15 degrees C. An unprecedented discussion on two-phase flow patterns inside tubes containing twisted-tape inserts is presented and the flow pattern effects on the frictional pressure drop are carefully discussed. Additionally, a new method to predict the frictional pressure drop during two-phase flow inside tubes containing twisted-tape inserts is proposed. (C) 2012 Elsevier Ltd. All rights reserved.

UV-Ozone Generation from Modified High Intensity Discharge Mercury Vapor Lamps for Treatment of Indium Tin Oxide Films

In a homemade UV-Ozone generator, different ignition tubes extracted from HID mercury vapor lamps were investigated, namely: 80, 125, 250 and 400 watts. The performance of the generator in function of the type of the ignition lamp was monitored by the measurements of the ozone concentration and the temperature increment. The results have shown that the 400 W set up presented the highest ozone production, which was used in the treatment of indium tin oxide (ITO) films. Polymer light emitting diodes were assembled using ITO films, treated for 10, 20 and 30 min, as an anode. The overall results indicate improvement of the threshold voltage (reduction) and electroluminescence of these devices.

Determination of atenolol in environmental water samples and pharmaceutical formulations at a graphite-epoxy composite electrode

A bare graphite-epoxy composite was evaluated as an electrode material in the determination of atenolol in natural water samples and pharmaceutical formulations for which the analyte was spiked. Using a DPV procedure, a linear response was observed in the 4.45-84.7 mu mol L-1 range with a LOD = 2.23 mu mol L-1, without need of surface renewal between successive runs, and recoveries between 92.5 and 107.5% for pharmaceutical formulations. The results obtained from the proposed procedure agreed with HPLC results within a 95% confidence level. During the determination of atenolol in water samples, recoveries between 96.1 and 102.6% were found.

A systematic review of mercury ototoxicity

Mercury is neurotoxic, and numerous studies have confirmed its ototoxic effect. However, the diagnosis and follow-up of mercury exposure require understanding the pathophysiology of the chemical substance. Based on a systematic literature review, this study aimed to demonstrate whether mercury is ototoxic and to analyze its mechanism of action on the peripheral and central auditory system, in order to contribute to the diagnosis and follow-up of exposure. This was a systematic review of studies published on the effects of mercury exposure on the auditory system. The full text of the studies and their methodological quality were analyzed. The review identified 108 studies published on the theme, of which 28 met the inclusion criteria. All the articles in the analysis showed that mercury exposure is ototoxic and produces peripheral and/or central damage. Acute and long-term exposure produces irreversible damage to the central auditory system. Biomarkers were unable to predict the relationship between degree of mercury poisoning and degree of lesion in the auditory system.

Determination of tetracycline in environmental water samples at a graphite-polyurethane composite electrode

A bare graphite-polyurethane composite was evaluated in the tetracycline (TC) determination in natural water samples. Using differential pulse voltammetry (DPV), a linear response was observed in the range of 4.00-40.0 µmol L-1 with limit of detection of 2.80 µmol L-1, without the need of surface renewing between successive runs. During the tetracycline determination in water samples, recoveries between 92.6 and 100% were found. The results for TC determination in water samples after a pre-concentration stage agreed with spiked value at a 95% confidence level according to student t-test.

Two-Phase Frictional Pressure Drop and Flow Boiling Heat Transfer for R245fa in a 2.32-mm Tube

Experimental two-phase frictional pressure drop and flow boiling heat transfer results are presented for a horizontal 2.32-mm ID stainless-steel tube using R245fa as working fluid. The frictional pressure drop data was obtained under adiabatic and diabatic conditions. Experiments were performed for mass velocities ranging from 100 to 700 kg m−2 s−1 , heat flux from 0 to 55 kW m−2 , exit saturation temperatures of 31 and 41◦C, and vapor qualities from 0.10 to 0.99. Pressures drop gradients and heat transfer coefficients ranging from 1 to 70 kPa m−1 and from 1 to 7 kW m−2 K−1 were measured. It was found that the heat transfer coefficient is a strong function of the heat flux, mass velocity, and vapor quality. Five frictional pressure drop predictive methods were compared against the experimental database. The Cioncolini et al. (2009) method was found to work the best. Six flow boiling heat transfer predictive methods were also compared against the present database. Liu and Winterton (1991), Zhang et al. (2004), and Saitoh et al. (2007) were ranked as the best methods. They predicted the experimental flow boiling heat transfer data with an average error around 19%.

Mercury-induced autoimmunity : Genetics and immunoregulation

The existence of immune self-tolerance allows the immune system to mount responses against infectious agents, but not against self-molecular constitutes. Although self-tolerance is a robust phenomenon, in some individuals as well as in experimental models, the self-tolerance breaks down and as a result, a self-destructive autoimmune disease emerges. The underlying mechanisms for the development of autoimmune diseases are not known, but genetic, environmental and immunological factors are suggested to be involved. In this thesis, we used murine mercury-induced autoimmunity to test this suggestion. In susceptible mice mercuric chloride induces a systemic autoimmune disease characterized by increased serum levels of IgG1 and IgE, production of anti-nucleolar autoantibodies (ANolA) and formation of renal IgG deposits. In contrast, in resistant DBA/2 (H-2d) mice, none of these characteristics develop after exposure to mercury. By crossing and backcrossing mercury-resistant DBA/2 mice to mercury susceptible strains, we found that the resistance was inherited as a dominant trait in F1 hybrids and that one gene or a cluster of genes located in the H-2 loci determined the resistance to ANolA production, whereas resistance to the other characteristics was found to be controlled by two or three non-H-2 genes. We further put forward the “cryptic peptide hypothesis” to investigate whether mercury and another xenobiotic metal use similar pathway(s) to induce the H-2 linked production of ANolA. We found that while mercury stimulated ANolA synthesis in all H-2 susceptible (H-2s, H-2q and H-2f) mouse strains, silver induced only ANolA responses in H-2s and H-2q mice, but not in H-2f mice. Further studies showed that the resistance to silver-induced ANolA production in H-2f mice was inherited as a dominant trait. We next tested the proposition that mercury induces more adverse immunological effects in mouse strains, which are genetically prone to develop autoimmune diseases, using tight-skin 1 mice, an animal model for human Scleroderma. It was found that in this strain, mercury induced a strong immune activation with autoimmune characteristics, but did not accelerate the development of dermal fibrosis, a characteristic in Tsk/1 mice. Finally we addressed the Th1/Th2 cross-regulation paradigm by examining if a Th1-type of response could interact with a Th2-type of response if simultaneous induced in susceptible mice. Our findings demonstrated that mercury-induced autoimmunity (Th2-type) and collagen-induced arthritis (CIA) (Th1-type) can interact in a synergistic, antagonistic or additive fashion, depending on at which stage of CIA mercury is administered.

Phytoremediation of mercury by terrestrial plants

Mercury (Hg) pollution is a global environmental problem. Numerous Hg-contaminated sites exist in the world and new techniques for remediation are urgently needed. Phytoremediation, use of plants to remove pollutants from the environment or to render them harmless, is considered as an environment-friendly method to remediate contaminated soil in-situ and has been applied for some other heavy metals. Whether this approach is suitable for remediation of Hg-contaminated soil is, however, an open question. The aim of this thesis was to study the fate of Hg in terrestrial plants (particularly the high biomass producing willow, Salix spp.) and thus to clarify the potential use of plants to remediate Hg-contaminated soils. Plants used for phytoremediation of Hg must tolerate Hg. A large variation (up to 30-fold difference) was detected among the six investigated clones of willow in their sensitivity to Hg as reflected in their empirical toxicity threshold (TT95b), the maximum unit toxicity (UTmax) and EC50 levels. This gives us a possibility to select Hg-tolerant willow clones to successfully grow in Hgcontaminated soils for phytoremediation. Release of Hg into air by plants is a concern when using phytoremediation in practice. No evidence was found in this study that Hg was released to the air via shoots of willow, garden pea (Pisum sativum L. cv Faenomen), spring wheat (Triticum aestivum L. cv Dragon), sugar beet (Beta vulgaris L. cv Monohill), oil-seed rape (Brassica napus L. cv Paroll) and white clover (Trifolium repens L.). Thus, we conclude that the Hg burden to the atmosphere via phytoremediation is not increased. Phytoremediation processes are based on the ability of plant roots to accumulate Hg and to translocate it to the shoots. Willow roots were shown to be able to efficiently accumulate Hg in hydroponics, however, no variation in the ability to accumulate was found among the eight willow clones using CVAAS to analyze Hg content in plants. The majority of the Hg accumulated remained in the roots and only 0.5-0.6% of the Hg accumulation was translocated to the shoots. Similar results were found for the five common cultivated plant species mentioned above. Moreover, the accumulation of Hg in willow was higher when being cultivated in methyl-Hg solution than in inorganic Hg solution, whereas the translocation of Hg to the shoots did not differ. The low bioavailability of Hg in contaminated soil is a restricting factor for the phytoextraction of Hg. A selected tolerant willow clone was used to study whether iodide addition could increase the plant-accumulation of Hg from contaminated soil. Both pot tests and field trials were carried out. Potassium iodide (KI) addition was found to mobilize Hg in contaminated soil and thus increase the bioavailability of Hg in soils. Addition of KI (0.2–1 mM) increased the Hg concentrations up to about 5, 3 and 8 times in the leaves, branches and roots, respectively. However, too high concentrations of KI were toxic to plants. As the majority of the Hg accumulated in the roots, it might be unrealistic to use willow for phytoextraction of Hg in practice, even though iodide could enhance the phytoextraction efficiency. In order to study the effect of willow on various soil fractions of Hg-contaminated soil, a 5-step sequential soil extraction method was used. Both the largest Hg-contaminated fractions, i.e. the Hg bound to residual organic matter (53%) and sulphides (43%), and the residual fraction (2.5%), were found to remain stable during cultivations of willow. The exchangeable Hg (0.1%) and the Hg bound to humic and fulvic acids (1.1%) decreased in the rhizospheric soil, whereas the plant accumulation of Hg increased with the cultivation time. The sum of the decrease of the two Hg fractions in soils was approximately equal to the amount of the Hg accumulated in plants. Consequently, plants may be suitable for phytostabilization of aged Hg-contaminated soil, in which root systems trap the bioavailable Hg and reduce the leakage of Hg from contaminated soils.

Electrode Materials for Ionic Liquid Based-Supercapacitors

The development of safe, high energy and power electrochemical energy-conversion systems can be a response to the worldwide demand for a clean and low-fuel-consuming transport. This thesis work, starting from a basic studies on the ionic liquid (IL) electrolytes and carbon electrodes and concluding with tests on large-size IL-based supercapacitor prototypes demonstrated that the IL-based asymmetric configuration (AEDLCs) is a powerful strategy to develop safe, high-energy supercapacitors that might compete with lithium-ion batteries in power assist-hybrid electric vehicles (HEVs). The increase of specific energy in EDLCs was achieved following three routes: i) the use of hydrophobic ionic liquids (ILs) as electrolytes; ii) the design and preparation of carbon electrode materials of tailored morphology and surface chemistry to feature high capacitance response in IL and iii) the asymmetric double-layer carbon supercapacitor configuration (AEDLC) which consists of assembling the supercapacitor with different carbon loadings at the two electrodes in order to exploit the wide electrochemical stability window (ESW) of IL and to reach high maximum cell voltage (Vmax). Among the various ILs investigated the N-methoxyethyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (PYR1(2O1)TFSI) was selected because of its hydrophobicity and high thermal stability up to 350 °C together with good conductivity and wide ESW, exploitable in a wide temperature range, below 0°C. For such exceptional properties PYR1(2O1)TFSI was used for the whole study to develop large size IL-based carbon supercapacitor prototype. This work also highlights that the use of ILs determines different chemical-physical properties at the interface electrode/electrolyte with respect to that formed by conventional electrolytes. Indeed, the absence of solvent in ILs makes the properties of the interface not mediated by the solvent and, thus, the dielectric constant and double-layer thickness strictly depend on the chemistry of the IL ions. The study of carbon electrode materials evidences several factors that have to be taken into account for designing performing carbon electrodes in IL. The heat-treatment in inert atmosphere of the activated carbon AC which gave ACT carbon featuring ca. 100 F/g in IL demonstrated the importance of surface chemistry in the capacitive response of the carbons in hydrophobic ILs. The tailored mesoporosity of the xerogel carbons is a key parameter to achieve high capacitance response. The CO2-treated xerogel carbon X3a featured a high specific capacitance of 120 F/g in PYR14TFSI, however, exhibiting high pore volume, an excess of IL is required to fill the pores with respect to that necessary for the charge-discharge process. Further advances were achieved with electrodes based on the disordered template carbon DTC7 with pore size distribution centred at 2.7 nm which featured a notably high specific capacitance of 140 F/g in PYR14TFSI and a moderate pore volume, V>1.5 nm of 0.70 cm3/g. This thesis work demonstrated that by means of the asymmetric configuration (AEDLC) it was possible to reach high cell voltage up to 3.9 V. Indeed, IL-based AEDLCs with the X3a or ACT carbon electrodes exhibited specific energy and power of ca. 30 Wh/kg and 10 kW/kg, respectively. The DTC7 carbon electrodes, featuring a capacitance response higher of 20%-40% than those of X3a and ACT, respectively, enabled the development of a PYR14TFSI-based AEDLC with specific energy and power of 47 Wh/kg and 13 kW/kg at 60°C with Vmax of 3.9 V. Given the availability of the ACT carbon (obtained from a commercial material), the PYR1(2O1)TFSI-based AEDLCs assembled with ACT carbon electrodes were selected within the EU ILHYPOS project for the development of large-size prototypes. This study demonstrated that PYR1(2O1)TFSI-based AEDLC can operate between -30°C and +60°C and its cycling stability was proved at 60°C up to 27,000 cycles with high Vmax up to 3.8 V. Such AEDLC was further investigated following USABC and DOE FreedomCAR reference protocols for HEV to evaluate its dynamic pulse-power and energy features. It was demonstrated that with Vmax of 3.7 V at T> 30 °C the challenging energy and power targets stated by DOE for power-assist HEVs, and at T> 0 °C the standards for the 12V-TSS and 42V-FSS and TPA 2s-pulse applications are satisfied, if the ratio wmodule/wSC = 2 is accomplished, which, however, is a very demanding condition. Finally, suggestions for further advances in IL-based AEDLC performance were found. Particularly, given that the main contribution to the ESR is the electrode charging resistance, which in turn is affected by the ionic resistance in the pores that is also modulated by pore length, the pore geometry is a key parameter in carbon design not only because it defines the carbon surface but also because it can differentially “amplify” the effect of IL conductivity on the electrode charging-discharging process and, thus, supercapacitor time constant.