First-Principles Calculations of the Electronic and Structural Properties of GaSb

In this paper, we carried out first-principles calculations in order to investigate the structural and electronic properties of the binary compound gallium antimonide (GaSb). This theoretical study was carried out using the Density Functional Theory within the plane-wave pseudopotential method. The effects ofexchange and correlation (XC) were treated using the functional Local Density Approximation (LDA), generalized gradient approximation (GGA): Perdew–Burke–Ernzerhof (PBE), Perdew-Burke-Ernzerhof revised for solids (PBEsol), Perdew-Wang91 (PW91), revised Perdew–Burke–Ernzerhof (rPBE), Armiento–Mattson 2005 (AM05) and meta-generalized gradient approximation (meta-GGA): Tao–Perdew– Staroverov–Scuseria (TPSS) and revised Tao–Perdew–Staroverov–Scuseria (RTPSS) and modified Becke-Johnson (MBJ). We calculated the densities of state (DOS) and band structure with different XC potentials identified and compared them with the theoretical and experimental results reported in the literature. It was discovered that functional: LDA, PBEsol, AM05 and RTPSS provide the best results to calculate the lattice parameters (a) and bulk modulus (B0); while for the cohesive energy (Ecoh), functional: AM05, RTPSS and PW91 are closer to the values obtained experimentally. The MBJ, Rtpss and AM05 values found for the band gap energy is slightly underestimated with those values reported experimentally.

Materiali ceramici a struttura Aurivillius per la produzione di solar fuels

Solar fuels from CO2 is a topic of current large scientific and industrial interest. In particular, photo-electrochemical cells (PECs) represent today one of the most promising technology for storing sun energy as chemical bonds exploiting carbon dioxide as starting reagent. In this thesis, the possibility of using Aurivillius-type compounds for the production of solar fuels was deeply investigated. Aurivillius-type perovskites, with general formula Bi(n+1)Fe(n-3)Ti3O(3n+3), were synthesized and fully characterized to study the influence of the number of perovskite layers as well as of the synthesis parameters onto their final properties. In particular, 8 different systems were considered increasing the amount of iron and, as a consequence, the number of perovskite layers. These compounds were synthesized through a standard solid-state reaction method as well as via a sol-gel technique and characterized by XRD, SEM and BET analyses. The band gap value and the photocatalytic activity towards Rhodamine B decomposition were assessed as well. For each system, a screen-printing ink was formulated to be deposited as photo-electrodes onto transparent conducting supports. The photo-electrodes were morphologically characterized by XRD and SEM analysis, and their electrochemical properties (cyclic and linear voltammetry, EIS, Mott-Schottky analysis) were determined. Finally, the most promising materials were tested as photo-cathode inside PEC cell under different illumination conditions, to quantify their ability to convert CO2. The obtained results show the potentiality of Aurivillius-type compounds as innovative material for carbon dioxide photo-electrochemical reduction.

Defect states in MAPbBr3 by photo-induced current transient spectroscopy

In the past decade, perovskites have been under the spotlight as promising semicon- ductors with unique properties. Hybrid halide perovskites show excellent characteristic properties suitable for optoelectronic applications as tunable band gap, high absorption coefficient, large mobility and long carrier recombination lifetime. However, a complete understanding of environmental instability and the nature of defects in these materials is still lacking, hindering the development of perovskite-based technologies. In this work we studied MAPbBr3 single crystals, fabricated with Inverse Temperature Crystallization (ITC) technique, with Photo-Induced Current Transient Spectroscopy (PICTS). PICTS is a transient photocurrent measurement rarely employed for studying perovskites mate- rials, that allows for the defects characterization in high resistivity materials. We studied the samples under different conditions, such as negative and positive voltage biases, bias stress, different contact geometries and different illumination wavelengths, in order to study their effect on the material physical properties and to evaluate the trap activation energies and their behavior under different working conditions.

A hydrodynamical view on the mass accretion onto massive halos

This Thesis presents the results of my work on how galaxy clusters form by the accretion of sub-clumps and diffuse materials, and how the accreted energy is distributed in the X-ray emitting plasma. Indeed, on scales larger than tens of millions of light years, the Universe is self-organised by gravity into a spiderweb, the Cosmic Web. Galaxy clusters are the knots of this Cosmic Web, but a strong definition of filaments (which link different knots) and their physical proprieties, is still uncertain. Even if this pattern was determined by studying the spatial distribution of galaxies in the optical band, recently, also in the X-rays probes of filamentary structures around galaxy clusters were obtained. Therefore, given these observational facilities, the galaxy clusters’ outskirts are the best candidate regions to detect filaments and study their physical characteristics. However, from X-rays observations, we have only a few detections of cosmic filaments to date. On the other hand, it is crucial to understand how the accreted energy is dissipated in the baryon content of galaxy clusters and groups. Indeed, it is well known that in the central region of galaxy clusters and groups, the baryon fraction increases with the halo mass. On the outer region, the lack of X-rays constraints influences our understanding of the evolution of baryons in the halos volume. The standard assumption of “closed-box” system, for which the baryon fraction should approach the cosmological ratio Omega_bar/Omega_m, for galaxy clusters and groups seems to be too strong, especially for less massive objects. Moreover, a complete redshift evolution of baryons in galaxy clusters and groups is still missing.

Sintesi di compositi nanostrutturati a base di TiO2 per la depurazione delle acque

Lo scopo di questo lavoro di tesi consiste nella realizzazione di fotocatalizzatori a base di nano-TiO2 per potenziali applicazioni nel campo della depurazione delle acque reflue. Nello specifico sono stati sintetizzati nanocompositi accoppiando nano-TiO2 a due materiali grafitici: ossido di grafene (GO), tramite ultrasonicazione (TGO) e nitruro di carbonio grafitico (g-C3N4), attraverso due tecniche: ultrasonicazione e polimerizzazione termica in situ. Per i compositi TGO lo studio relativo alla sintesi è stato rivolto all’ottimizzazione della percentuale in peso di GO. Per i compositi a base di g-C3N4 lo scopo è stato quello di valutare quale dei due metodi di sintesi fosse il più efficace. I materiali ottenuti sono stati caratterizzati dal punto di vista chimico-fisico (DLS-ELS, XRD, Band Gap, BET, SEM, FT-IR, TGA-DSC) e funzionale. La caratterizzazione funzionale è stata eseguita per valutare le prestazioni fotocatalitiche dei fotocatalizzatori nanocompositi utilizzando, come reazione modello, la fotodegradazione di Rodamina B, sotto luce UV e solare. I risultati hanno messo in luce che la percentuale ottimale di GO, nei compositi TGO, è pari al 16%. Inoltre, è stato osservato un effetto sinergico tra TiO2 e GO dove i nanocompositi TGO hanno mostrato maggiore attività fotocatalitiche rispetto alla singola TiO2. I dati fotocatalitici hanno evidenziato che il metodo ottimale per la preparazione dei compositi a base di g-C3N4 e TiO2, è la polimerizzazione termica in situ a 500°C.

Convertitori elettronici di potenza ad alta frequenza di commutazione con isolamento galvanico

L’importanza sempre crescente dell’elettronica è accompagnata da una crescente necessità di compattezza ed efficienza energetica. Una parte sostanziale del costo e delle dimensioni dei moderni dispositivi elettronici è legata ai sistemi di conversione di potenza, il cui volume è dominato dai passivi. Per poter affrontare la miniaturizzazione dei circuiti elettronici di potenza sono dunque necessari metodi di design e tecnologie che permettano di ridurre i requisiti di immagazzinamento di energia. Un possibile approccio è aumentare la frequenza di commutazione nel range delle decine di MHz facendo in modo che l’efficienza non venga penalizzata dall’aumento delle perdite in commutazione. Ciò è reso possibile dall’impiego di topologie di convertitori risonanti che implementano la condizione ZVS. Oltre all’impiego di convertitori risonanti, l’aumento della frequenza operativa, mantenendo elevata l’efficienza, è abilitato dall’impiego di dispositivi a semiconduttore a largo band-gap come il nitruro di gallio (GaN), i quali mostrano performance superiori al silicio in termini di temperature operative, frequenze di funzionamento e densità di potenza. Inoltre, ad elevate frequenze di commutazione, l’utilizzo di magnetici coreless diventa una valida alterativa ai magnetici tradizionali, con vantaggi in termini di costo, ingombro e di efficienza. Il focus di questa tesi è il progetto di un convertitore DC-DC risonante con isolamento coreless ad alta efficienza e ad alta frequenza in tecnologia GaN a 650 V pensato per applicazioni wall-adapter. A seguito dello studio di alcune topologie di inverter risonanti e dei rispettivi rettificatori, si è scelta la topologia phi2 per il design del convertitore DC-DC double phi2 isolato (simulato con LTspice). È stato poi effettuato il design di un trasformatore coreless su PCB tramite simulatore elettromagnetico (ADS Keysight Momentum). Il convertitore complessivo presenta un’efficienza del 95,8% con una efficienza del link del 98%.

Band-edge states of the zero(th)-order gap in quasi-periodic photonic superlattices

The photonic modes of Thue-Morse and Fibonacci lattices with generating layers A and B, of positive and negative indices of refraction, are calculated by the transfer-matrix technique. For Thue-Morse lattices, as well for periodic lattices with AB unit cell, the constructive interference of reflected waves, corresponding to the zero(th)-order gap, takes place when the optical paths in single layers A and B are commensurate. In contrast, for Fibonacci lattices of high order, the same phenomenon occurs when the ratio of those optical paths is close to the golden ratio. In the long wavelength limit, analytical expressions defining the edge frequencies of the zero(th) order gap are obtained for both quasi-periodic lattices. Furthermore, analytical expressions that define the gap edges around the zero(th) order gap are shown to correspond to the = 0 and = 0 conditions.

Band edge states of the < n >=0 gap of Fibonacci photonic lattices

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Theory of near-gap second harmonic generation in centrosymmetric magnetic semiconductors: Europium chalcogenides

Second harmonic generation is strictly forbidden in centrosymmetric materials, within the electric dipole approximation. Recently, it was found that the centrosymmetric magnetic semiconductors EuTe and EuSe can generate near-gap second harmonics, if the system is submitted to an external magnetic field. Here, a theoretical model is presented, which well describes the observed phenomena. The model shows that second harmonic generation becomes efficient when the magnetic dipole oscillations between the band-edge excited states of the system, induced by the excitation light, enter the in-phase regime, which can be achieved by applying a magnetic field to the material.

Structural and optical analysis of GaAsP/GaP core-shell nanowires

The structural and optical properties of GaAsP/GaP core-shell nanowires grown by gas source molecular beam epitaxy were investigated by transmission electron microscopy, Raman spectroscopy, photoluminescence (PL), and magneto-PL. The effects of surface depletion and compositional variations in the ternary alloy manifested as a redshift in GaAsP PL upon surface passivation, and a decrease in redshift in PL in the presence of a magnetic field due to spatial confinement of carriers.

Comparative analysis of triple band S-C-L erbium-doped fibre and semiconductor optical amplifier for CWDM applications

The authors present a comparative analysis between a triple-band S-C-L erbium-doped fibre amplifier and a commercial semiconductor optical amplifier in a CWDM application scenario. Both technologies were characterised for gain and noise figures from 1480 to 1610 nm (S, C and L bands) and their systemic performances were evaluated in terms of bit error rate measurements for a wide range of optical power levels.

Modeling the optical constants of GaP, InP, and InAs

An extension of the Adachi model with the adjustable broadening function, instead of the Lorentzian one, is employed to model the optical constants of GaP, InP, and InAs. Adjustable broadening is modeled by replacing the damping constant with the frequency-dependent expression. The improved flexibility of the model enables achieving an excellent agreement with the experimental data. The relative rms errors obtained for the refractive index equal 1.2% for GaP, 1.0% for InP, and 1.6% for InAs. (C) 1999 American Institute of Physics. [S0021-8979(99)05807-7].

Comparison of Fourier-Domain and Time-Domain Optical Coherence Tomography in the Detection of Band Atrophy of the Optic Nerve

PURPOSE: To compare the ability of Fourier-domain (FD) optical coherence tomography (3D OCT-1000; Top, con, Tokyo, Japan) and time domain (TD) OCT (Stratus; Carl Zeiss Meditec Inc, Dublin, California, USA) to detect axonal loss in eyes with band atrophy (BA) of the optic nerve. DESIGN: Cross-sectional study. METHODS: Thirty-six eyes from 36 patients with BA and temporal visual field (VF) defect from chiasmal compression and 36 normal eyes were studied. Subjects were submitted to standard automated perimetry and macular and retinal nerve fiber layer (RNFL) measurements were taken using 3D OCT-1000 and Stratus OCT. Receiver operating characteristic (ROC) curves were calculated for each parameter. Spearman correlation coefficients were obtained to evaluate the relationship between RNFL and macular thickness parameters and severity of VF loss. Measurements from the two devices were compared. RESULTS: Regardless of OCT device, all RNFL and macular thickness parameters were significantly lower in eyes with BA compared with normal eyes, but no statistically significant difference was found with regard to the area under the ROC curve. Structure-function relationships were also similar for the two devices. In both groups, RNFL and macular thickness measurements were generally and in some cases significantly smaller with 3D OCT-1000 than with Stratus OCT. CONCLUSIONS: The introduction of FD technology did not lead to better discrimination ability for detecting BA of the optic nerve compared with TD technology when using the software currently provided by the manufacturer. 3D OCT-1000 FD OCT RNFL and macular measurements were generally smaller than TD Stratus OCT measurements. Investigators should be aware of this fact when comparing measurements obtained with these two devices. (Am J Oplathalmol 2009;147: 56-63. (c) 2009 by Elsevier Inc. All rights reserved.)

Comparison of the GDx VCC scanning laser polarimeter and the stratus optical coherence tomograph in the detection of band atrophy of the optic nerve

Aim To compare the ability of scanning laser polarimeter (SLP) with variable corneal compensation (GDx VCC) and optical coherence tomograph (Stratus OCT) to discriminate between eyes with band atrophy (BA) of the optic nerve and healthy eyes. Methods The study included 37 eyes with BA and temporal visual field (VF) defects from chiasmal compression, and 29 normal eyes. Subjects underwent standard automated perimetry (SAP) and retinal nerve fibre layer (RNFL) scans using GDx VCC and Stratus OCT. The severity of the VF defects was evaluated by the temporal mean defect (TMD), calculated as the average of 22 values of the temporal total deviation plot on SAP. Receiver operating characteristic (ROC) curves were calculated. Pearson`s correlation coefficients were used to evaluate the relationship between RNFL thickness parameters and the TMD. Results No significant difference was found between the ROC curves areas (AUCs) for the GDx VCC and Stratus OCT with regard to average RNFL thickness (0.98 and 0.99, respectively) and the superior (0.94; 0.95), inferior (0.96; 0.97), and nasal (0.92; 0.96) quadrants. However, the AUC in the temporal quadrant (0.77) was significantly smaller (P < 0.001) with GDx VCC than with Stratus OCT (0.98). Lower TMD values were associated with smaller RNFL thickness in most parameters from both equipments. Conclusion Adding VCC resulted in improved performance in SLP when evaluating eyes with BA, and both technologies are sensitive in detecting average, superior, inferior, and nasal quadrant RNFL loss. However, GDx VCC still poorly discriminates RNFL loss in the temporal quadrant when compared with Stratus OCT.

SiC pinpin photonic for linking the visible spectrum to the telecom gap

Expanding far beyond traditional applications at telecommunications wavelengths, the SiC photonic devices has recently proven its merits for working with visible range optical signals. Reconfigurable wavelength selectors are essential sub-systems for implementing reconfigurable WDM networks and optical signal processing. Visible range to telecom band spectral translation in SiC/Si can be accomplished using wavelength selector under appropriated optical bias, acting as reconfigurable active filters. In this paper we present a monolithically integrated wavelength selector based on a multilayer SiC/Si integrated optical filters that requires optical switches to select wavelengths. The selector filter is realized by using double pin/pin a-SiC:H photodetector with front and back biased optical gating elements. Red, green, blue and violet communication channels are transmitted together, each one with a specific bit sequence. The combined optical signal is analyzed by reading out the generated photocurrent, under different background wavelengths applied either from the front or the back side. The backgrounds acts as channel selectors that selects one or more channels by splitting portions of the input multi-channel optical signals across the front and back photodiodes. The transfer characteristics effects due to changes in steady state light, irradiation side and frequency are presented. The relationship between the optical inputs and the digital output levels is established. (C) 2014 Elsevier B.V. All rights reserved.