Product Development Management. Experiment for New Type of Project Management.

Tuotekehityksestä ja sen johtamisesta on tullut erittäin tärkeä osa tietoliikenneteollisuutta. Jatkuva teknologinen kehitys ja lyhentyneet tuotteiden elinkaaret ovat saaneet yritykset panostamaan tuotekehitysprosesseihin ja johtamiseen. Erityisesti nopeatempoiset ja lyhytkestoiset projektit onkin koettu ongelmallisiksi. Diplomityön tavoitteena oli tutkia teoriassa uusien tuotteiden tuotekehitystä, tuotekehitysprosesseja sekä projektijohtamista. Käytännön osuudessa oli tavoitteena kehittää kokeellinen tuotekehitysmalli nopeatempoisten ja lyhytkestoisten tuotekehitysprojektien tarpeisiin muuttuvissa ja epävarmoissa olosuhteissa. Tavoitteena oli myös käyttää ja analysoida kehitettyä kokeellista tuotekehitysmallia lyhytkestoisen tuotekehitysprojektin yhteydessä. Työn tuloksena saatiin ohjelmistotuote vaadituilla ominaisuuksilla vaaditussa ajassa ja todettiin projektissa käytetyn kokeellisen tuotekehitysmallin osoittautuneen toimivaksi. Jatkotutkimuksia tarvitaan selvittämään mallin sopivuutta ja sen kehityskohteita erilaisten tuotekehitysprojektien kohdalla.

Development of a Business Model that Supports Mobile Value-Added Services Market Creation in Emerging Countries

Tutkielman tavoitteena on luoda liiketoimintamalli, joka tukee langattomien matkaviestintäpalveluiden markkinoiden luomista kehittyvillä markkinoilla. Teoreettinen osa tarkastelee langattomien matkaviestintäpalveluiden liiketoimintamallin kehittämisen tärkeimpiä elementtejä CIS maissa. Teoreettisen kappaleen tuloksena saadaan puitteet, jonka avulla liiketoimintamalli matkaviestintäpalveluille voidaan kehittää. Tutkielman empiirinen osa on toteutettu case tutkimuksena, jonka tavoitteena on ollut langattomien matkaviestintäpalvelujen markkinoiden luominen CIS maissa. Pääasiallinen empiirisen tiedon lähde on ollut teemahaastattelut. Tuloksena saatuja empiirisen osan tietoja verrataan teoriakappaleen vastaaviin tuloksiin Tulokset osoittavat, että radikaalin korkean teknologian innovaation markkinoiden luominen on hidas prosessi, joka vaatii kärsivällisyyttä yritykseltä. Markkinoiden, teknologian ja strategian epävarmuustekijät tuovat epävarmuutta kehittyvälle toimialalle ja markkinoille, joka vaikeuttaa liiketoimintamallin kehittämistä. Tärkein tekijä on palvelujen markkinointi ennemmin kuin teknologian. Avain kyvykkyys markkinoiden luomisessa on oppiminen, ei tietäminen.

Development of Furnace Model for Bubbling Fluidized Bed Boiler

The aim of this thesis was to develop a model, which can predict heat transfer, heat release distribution and vertical temperature profile of gas phase in the furnace of a bubbling fluidized bed (BFB) boiler. The model is based on three separate model components that take care of heat transfer, heat release distribution and mass and energy balance calculations taking into account the boiler design and operating conditions. The model was successfully validated by solving the model parameters on the basis of commercial size BFB boiler test run information and by performing parametric studies with the model. Implementation of the developed model for the Foster Wheeler BFB design procedures will require model validation with existing BFB database and possibly more detailed measurements at the commercial size BFB boilers.

The Swiss reform of the allocation of tasks : The conventions-programs as a new partnership model for vertical cooperation ?

This research examines the impacts of the Swiss reform of the allocation of tasks which was accepted in 2004 and implemented in 2008 to "re-assign" the responsibilities between the federal government and the cantons. The public tasks were redistributed, according to the leading and fundamental principle of subsidiarity. Seven tasks came under exclusive federal responsibility; ten came under the control of the cantons; and twenty-two "common tasks" were allocated to both the Confederation and the cantons. For these common tasks it wasn't possible to separate the management and the implementation. In order to deal with nineteen of them, the reform introduced the conventions-programs (CPs), which are public law contracts signed by the Confederation with each canton. These CPs are generally valid for periods of four years (2008-11, 2012-15 and 2016-19, respectively). The third period is currently being prepared. By using the principal-agent theory I examine how contracts can improve political relations between a principal (Confederation) and an agent (canton). I also provide a first qualitative analysis by examining the impacts of these contracts on the vertical cooperation and on the implication of different actors by focusing my study on five CPs - protection of cultural heritage and conservation of historic monuments, encouragement of the integration of foreigners, economic development, protection against noise and protection of the nature and landscape - applied in five cantons, which represents twenty-five cases studies.

Supplier process development

Tämän diplomityön tarkoituksena on parantaa Timberjackin ja Timberjackin toimittajien välistä yhteistyötä ja saattaa Timberjackin toimintatavat toimittajien tietoisuuteen. Aiheen laajuuden vuoksi yksittäisten aihepiirien syvällinen tutkiminen jäi vähäiseksi. Monet globaalit yhtiöt ovat nykyisin ottaneet selkeäksi strategiakseen toimintojensa ulkoistamisen ja tällöin yhtiölle itselleen jää ainoastaan lopputuotteiden kokoonpanon työvaiheet. Tämä tarkoittaa, että ulkoisilta toimittajilta ostetaan entistä enemmän komponentteja ja tuotekokonaisuuksia. Toisaalta taas harvalla toimittajalla on vielä tarvittavaa tieto-taitoa tai resursseja vastata päämiehen lisääntyviin tarpeisiin. Tämä on syy miksi suuret maailmanluokan yhtiöt panostavat nykyisin huomattavia voimavaroja toimittajaketjun kehittämiseen. Diplomityön ensimmäisessä osiossa paneudutaan teoria-asioihin, jotka tulee olla tiedossa kehitettäessä yhteistyötä toimittajien kanssa. Toisessa osassa tutkitaan Timberjackin toimintatapoja, tuotantomallia ja nykyisiä toimittajia. Nämä tiedot ovat välttämättömiä, kun luodaan kokonaiskuvaa toimittajaprosessista ja kun kehitetään uusia työkaluja helpottamaan toimittajien ja Timberjackin välistä yhteistyötä. Työn tuloksena Timberjackilla on nyt toimittajakäsikirja, joka sisältää tietoja, jotka toimittajien tulee huomioida toimiessaan Timberjackin kanssa ja myös ohjeita siitä, kuinka toimittajat voivat kehittää omia prosessejaan.

Development of e-Service tools for customer services and processes, Case: KONE Oyj Finland

Tutkimuksen tavoitteena oli selvittää miten kehittää yrityksen nykyistä e-palvelujärjestelmää, Internet -teknologiaan perustuvaa sähköisiä kommunikaatio- ja tiedonjakojärjestelmää, yrityksen business-to-business asiakkuuksien johtamisessa. Tavoitteena oli myös luoda ehdotukset uusista e-palvelusopimusmalleista. Tutkimuksen teoriaosuudessa pyrittiin kehittämään aikaisempiin tutkimuksiin, tietokirjallisuuteen ja asiantuntijoihin perustuva viitekehysmalli. Empiirisessä osassa tutkimuksen tavoitteisiin pyrittiin haastattelemalla yrityksen asiakkaita ja henkilöstöä, sekä tarkastelemalla asiakaskontaktien nykyistä tilaa ja kehittymistä. Näiden tietojen perusteella selvitettiin e-palvelun käyttäjien tarpeita, profiilia ja valmiuksia palvelun käyttöön sekä palvelun nykyistä houkuttelevuutta. Tutkimuksen teoriaosan lähdeaineistona käytettiin kirjallisuutta, artikkeleita ja tilastoja asiakashallinnasta sekä e-palveluiden, erityisesti Internet ja verkkopalveluiden markkinoinnista, nykytilasta sekä palveluiden kehittämisestä. Lisäksi tutkittiin kirjallisuutta arvoverkostoanalyysistä, asiakkaan arvosta, informaatioteknologiasta, palvelun laadusta ja asiakastyytyväisyydestä. Tutkimuksen empiirinen osa perustuu yrityksen henkilöstöltä sekä asiakkailta haastatteluissa kerättyihin tietoihin, yrityksen ennalta keräämiin materiaaleihin sekä Taloustutkimuksen keräämiin tietoihin. Tutkimuksessa käytettiin case -menetelmää, joka oli yhdistelmä sekä kvalitatiivista että kvantitatiivista tutkimusta. Casen tarkoituksena oli testata mallin paikkansapitävyyttä ja käyttökelpoisuutta, sekä selvittää onko olemassa vielä muita tekijöitä, jotka vaikuttavat asiakkaan saamaan arvoon. Kvalitatiivinen aineisto perustuu teemahaastattelumenetelmää soveltaen haastateltuihin asiakkaisiin ja yrityksen työntekijöihin. Kvantitatiivinen tutkimus perustuu Taloustutkimuksen tutkimukseen ja yrityksen asiakaskontakteista kerättyyn tietoon. Haastatteluiden perusteella e-palvelut nähtiin hyödyllisinä ja tulevaisuudessa erittäin tärkeinä. E-palvelut nähdään yhtenä tärkeänä kanavana, perinteisten kanavien rinnalla, tehostaa business-to-business -asiakkuuksien johtamista. Tutkimuksen antamien tulosten mukaan asiakkaiden palveluun liittyvän tieto-, taito-, tarpeellisuus- ja kiinnostavuustasojen vaihtelevaisuus osoittaa selvän tarpeen eritasoisille e-palvelupaketti ratkaisuille. Tuloksista muodostettu ratkaisuehdotus käsittää neljän eri e-palvelupaketin rakentamisen asiakkaiden eri tarpeita mukaillen.

Creatine deficiency syndomes : a new model of partial GAMT deficiency affecting brain cell development

Les syndromes de déficiences cérébrales en créatine (CCDS) sont dus à des mutations dans les gènes GATM et G AMT (codant pour les enzymes AGAT et G AMT de la voie de synthèse de créatine) ainsi que SLC6A8 (transporteur de créatine), et génèrent une absence ou une très forte baisse de créatine (Cr) dans le cerveau, mesurée par spectroscopic de résonance magnétique. Les patients CCDS développent des handicaps neurologiques sévères. Les patients AGAT et GAMT peuvent être traités avec des doses importantes de Cr, mais gardent dans la plupart des cas des séquelles neurologiques irréversibles. Aucun traitement efficace n'existe à ce jour pour la déficience en SLC6A8. Bien que de nombreux modèles aient été développés pour comprendre la Cr cérébrale en conditions physiologiques, les pathomécanismes des CCDS ne sont pas encore compris. Des souris transgéniques pour les gènes Gatm, Gamt et Slc6a8 ont été générées, mais elles ne miment que partiellement la pathologie humaine. Parmi les CCDS, la déficience en GAMT est la plus sévère, en raison de l'accumulation cérébrale de l'intermédiaire guanidinoacétate (GAA). Alors que la toxicité cérébrale du GAA a été étudiée par exposition directe au GAA d'animaux adultes sains, les mécanismes de la toxicité du GAA en condition de déficience en GAMT dans le cerveau en développement sont encore inconnus. Le but de ce projet était donc de développer un modèle de déficience en GAMT dans des cultures 3D primaires de cellules nerveuses de rat en agrégats par knock-down du gène GAMT, en utilisant un virus adéno-associé (AAV) induisant le mécanisme d'interférence à l'ARN (RNAi). Le virus scAAV2, à la multiplicité d'infection de 1000, s'est révélé le plus efficace pour transduire tous les types de cellules nerveuses des cultures (neurones, astrocytes, oligodendrocytes), et générer un knock-down maximal de la protéine GAMT de 85% (jour in vitro 18). Cette déficience partielle en GAMT s'est révélée insuffisante pour générer une déficience en Cr, mais a causé l'accumulation attendue de GAA, à des doses comparables aux niveaux observés dans le LCR des patients GAMT. Le GAA a induit une croissance axonale anarchique accompagnée d'une baisse de l'apoptose naturelle, suivis par une induction tardive de mort cellulaire non-apoptotique. Le co-traitement par la Cr a prévenu tous les effets toxiques du GAA. Ce travail montre que l'accumulation de GAA en absence de déficience en Cr est suffisante pour affecter le développement du tissu nerveux, et suggère que des formes de déficiences en GAMT supplémentaires, ne présentant pas de déficiences en Cr, pourraient être découvertes par mesure du GAA, en particulier à travers les programmes récemment proposés de dépistage néonatal de la déficience en GAMT. -- Cerebral creatine deficiency syndromes (CCDS) are caused by mutations in the genes GATM and GAMT (respectively coding for the two enzymes of the creatine synthetic pathway, AGAT and GAMT) as well as SLC6A8 (creatine transporter), and lead to the absence or very strong decrease of creatine (Cr) in the brain when measured by magnetic resonance spectroscopy. Affected patients show severe neurological impairments. While AGAT and GAMT deficient patients can be treated with high dosages of Cr, most remain with irreversible brain sequelae. No treatment has been successful so far for SLC6A8 deficiency. While many models have helped understanding the cerebral Cr pathways in physiological conditions, the pathomechanisms underlying CCDS are yet to be elucidated. Transgenic mice carrying mutations in the Gatm, Gamt and Slc6a8 genes have been developed, but only partially mimic the human pathology. Among CCDS, GAMT deficiency is the most severe, due to the CNS accumulation of the guanidinoacetate (GAA) intermediate. While brain toxicity of GAA has been explored through direct GAA exposure of adult healthy animals, the mechanisms underlying GAA toxicity in GAMT deficiency conditions on the developing CNS are yet unknown. The aim of this project was thus to develop and characterize a GAMT deficiency model in developing brain cells by gene knockdown, by adeno-associated virus (AAV)-driven RNA interference (RNAi) in rat 3D organotypic primary brain cell cultures in aggregates. scAAV2 with a multiplicity of infection of 1000 was shown as the most efficient serotype, was able to transduce all brain cell types (neurons, astrocytes, oligodendrocytes) and to induce a maximal GAMT protein knockdown of 85% (day in vitro 18). Metabolite analysis showed that partial GAMT knockdown was insufficient to induce Cr deficiency but generated the awaited GAA accumulation at concentrations comparable to the levels observed in cerebrospinal fluid of GAMT-deficient patients. Accumulated GAA induced axonal hypersprouting paralleled with inhibition of natural apoptosis, followed by a later induction in non-apoptotic cell death. Cr supplementation led to the prevention of all GAA-induced toxic effects. This work shows that GAA accumulation without Cr deficiency is sufficient to affect CNS development, and suggests that additional partial GAMT deficiencies, which may not show the classical brain Cr deficiency, may be discovered through GAA measurement including by recently proposed neonatal screening programs for GAMT deficiency.

Seismic characterization of heterogeneous sedimentary and fractured rocks based on Biot's theory of poroelasticity

Understanding and quantifying seismic energy dissipation, which manifests itself in terms of velocity dispersion and attenuation, in fluid-saturated porous rocks is of considerable interest, since it offers the perspective of extracting information with regard to the elastic and hydraulic rock properties. There is increasing evidence to suggest that wave-induced fluid flow, or simply WIFF, is the dominant underlying physical mechanism governing these phenomena throughout the seismic, sonic, and ultrasonic frequency ranges. This mechanism, which can prevail at the microscopic, mesoscopic, and macroscopic scale ranges, operates through viscous energy dissipation in response to fluid pressure gradients and inertial effects induced by the passing wavefield. In the first part of this thesis, we present an analysis of broad-band multi-frequency sonic log data from a borehole penetrating water-saturated unconsolidated glacio-fluvial sediments. An inherent complication arising in the interpretation of the observed P-wave attenuation and velocity dispersion is, however, that the relative importance of WIFF at the various scales is unknown and difficult to unravel. An important generic result of our work is that the levels of attenuation and velocity dispersion due to the presence of mesoscopic heterogeneities in water-saturated unconsolidated clastic sediments are expected to be largely negligible. Conversely, WIFF at the macroscopic scale allows for explaining most of the considered data while refinements provided by including WIFF at the microscopic scale in the analysis are locally meaningful. Using a Monte-Carlo-type inversion approach, we compare the capability of the different models describing WIFF at the macroscopic and microscopic scales with regard to their ability to constrain the dry frame elastic moduli and the permeability as well as their local probability distribution. In the second part of this thesis, we explore the issue of determining the size of a representative elementary volume (REV) arising in the numerical upscaling procedures of effective seismic velocity dispersion and attenuation of heterogeneous media. To this end, we focus on a set of idealized synthetic rock samples characterized by the presence of layers, fractures or patchy saturation in the mesocopic scale range. These scenarios are highly pertinent because they tend to be associated with very high levels of velocity dispersion and attenuation caused by WIFF in the mesoscopic scale range. The problem of determining the REV size for generic heterogeneous rocks is extremely complex and entirely unexplored in the given context. In this pilot study, we have therefore focused on periodic media, which assures the inherent self- similarity of the considered samples regardless of their size and thus simplifies the problem to a systematic analysis of the dependence of the REV size on the applied boundary conditions in the numerical simulations. Our results demonstrate that boundary condition effects are absent for layered media and negligible in the presence of patchy saturation, thus resulting in minimum REV sizes. Conversely, strong boundary condition effects arise in the presence of a periodic distribution of finite-length fractures, thus leading to large REV sizes. In the third part of the thesis, we propose a novel effective poroelastic model for periodic media characterized by mesoscopic layering, which accounts for WIFF at both the macroscopic and mesoscopic scales as well as for the anisotropy associated with the layering. Correspondingly, this model correctly predicts the existence of the fast and slow P-waves as well as quasi and pure S-waves for any direction of wave propagation as long as the corresponding wavelengths are much larger than the layer thicknesses. The primary motivation for this work is that, for formations of intermediate to high permeability, such as, for example, unconsolidated sediments, clean sandstones, or fractured rocks, these two WIFF mechanisms may prevail at similar frequencies. This scenario, which can be expected rather common, cannot be accounted for by existing models for layered porous media. Comparisons of analytical solutions of the P- and S-wave phase velocities and inverse quality factors for wave propagation perpendicular to the layering with those obtained from numerical simulations based on a ID finite-element solution of the poroelastic equations of motion show very good agreement as long as the assumption of long wavelengths remains valid. A limitation of the proposed model is its inability to account for inertial effects in mesoscopic WIFF when both WIFF mechanisms prevail at similar frequencies. Our results do, however, also indicate that the associated error is likely to be relatively small, as, even at frequencies at which both inertial and scattering effects are expected to be at play, the proposed model provides a solution that is remarkably close to its numerical benchmark. -- Comprendre et pouvoir quantifier la dissipation d'énergie sismique qui se traduit par la dispersion et l'atténuation des vitesses dans les roches poreuses et saturées en fluide est un intérêt primordial pour obtenir des informations à propos des propriétés élastique et hydraulique des roches en question. De plus en plus d'études montrent que le déplacement relatif du fluide par rapport au solide induit par le passage de l'onde (wave induced fluid flow en anglais, dont on gardera ici l'abréviation largement utilisée, WIFF), représente le principal mécanisme physique qui régit ces phénomènes, pour la gamme des fréquences sismiques, sonique et jusqu'à l'ultrasonique. Ce mécanisme, qui prédomine aux échelles microscopique, mésoscopique et macroscopique, est lié à la dissipation d'énergie visqueuse résultant des gradients de pression de fluide et des effets inertiels induits par le passage du champ d'onde. Dans la première partie de cette thèse, nous présentons une analyse de données de diagraphie acoustique à large bande et multifréquences, issues d'un forage réalisé dans des sédiments glaciaux-fluviaux, non-consolidés et saturés en eau. La difficulté inhérente à l'interprétation de l'atténuation et de la dispersion des vitesses des ondes P observées, est que l'importance des WIFF aux différentes échelles est inconnue et difficile à quantifier. Notre étude montre que l'on peut négliger le taux d'atténuation et de dispersion des vitesses dû à la présence d'hétérogénéités à l'échelle mésoscopique dans des sédiments clastiques, non- consolidés et saturés en eau. A l'inverse, les WIFF à l'échelle macroscopique expliquent la plupart des données, tandis que les précisions apportées par les WIFF à l'échelle microscopique sont localement significatives. En utilisant une méthode d'inversion du type Monte-Carlo, nous avons comparé, pour les deux modèles WIFF aux échelles macroscopique et microscopique, leur capacité à contraindre les modules élastiques de la matrice sèche et la perméabilité ainsi que leur distribution de probabilité locale. Dans une seconde partie de cette thèse, nous cherchons une solution pour déterminer la dimension d'un volume élémentaire représentatif (noté VER). Cette problématique se pose dans les procédures numériques de changement d'échelle pour déterminer l'atténuation effective et la dispersion effective de la vitesse sismique dans un milieu hétérogène. Pour ce faire, nous nous concentrons sur un ensemble d'échantillons de roches synthétiques idéalisés incluant des strates, des fissures, ou une saturation partielle à l'échelle mésoscopique. Ces scénarios sont hautement pertinents, car ils sont associés à un taux très élevé d'atténuation et de dispersion des vitesses causé par les WIFF à l'échelle mésoscopique. L'enjeu de déterminer la dimension d'un VER pour une roche hétérogène est très complexe et encore inexploré dans le contexte actuel. Dans cette étude-pilote, nous nous focalisons sur des milieux périodiques, qui assurent l'autosimilarité des échantillons considérés indépendamment de leur taille. Ainsi, nous simplifions le problème à une analyse systématique de la dépendance de la dimension des VER aux conditions aux limites appliquées. Nos résultats indiquent que les effets des conditions aux limites sont absents pour un milieu stratifié, et négligeables pour un milieu à saturation partielle : cela résultant à des dimensions petites des VER. Au contraire, de forts effets des conditions aux limites apparaissent dans les milieux présentant une distribution périodique de fissures de taille finie : cela conduisant à de grandes dimensions des VER. Dans la troisième partie de cette thèse, nous proposons un nouveau modèle poro- élastique effectif, pour les milieux périodiques caractérisés par une stratification mésoscopique, qui prendra en compte les WIFF à la fois aux échelles mésoscopique et macroscopique, ainsi que l'anisotropie associée à ces strates. Ce modèle prédit alors avec exactitude l'existence des ondes P rapides et lentes ainsi que les quasis et pures ondes S, pour toutes les directions de propagation de l'onde, tant que la longueur d'onde correspondante est bien plus grande que l'épaisseur de la strate. L'intérêt principal de ce travail est que, pour les formations à perméabilité moyenne à élevée, comme, par exemple, les sédiments non- consolidés, les grès ou encore les roches fissurées, ces deux mécanismes d'WIFF peuvent avoir lieu à des fréquences similaires. Or, ce scénario, qui est assez commun, n'est pas décrit par les modèles existants pour les milieux poreux stratifiés. Les comparaisons des solutions analytiques des vitesses des ondes P et S et de l'atténuation de la propagation des ondes perpendiculaires à la stratification, avec les solutions obtenues à partir de simulations numériques en éléments finis, fondées sur une solution obtenue en 1D des équations poro- élastiques, montrent un très bon accord, tant que l'hypothèse des grandes longueurs d'onde reste valable. Il y a cependant une limitation de ce modèle qui est liée à son incapacité à prendre en compte les effets inertiels dans les WIFF mésoscopiques quand les deux mécanismes d'WIFF prédominent à des fréquences similaires. Néanmoins, nos résultats montrent aussi que l'erreur associée est relativement faible, même à des fréquences à laquelle sont attendus les deux effets d'inertie et de diffusion, indiquant que le modèle proposé fournit une solution qui est remarquablement proche de sa référence numérique.

Development of a population-based cost-effectiveness model of chronic graft versus host disease in Spain

Chronic graft-versus-host disease (cGvHD) is the leading cause of late nonrelapse mortality (transplant-related mortality) after hematopoietic stem cell transplant. Given that there are a wide range of treatment options for cGvHD, assessment of the associated costs and efficacy can help clinicians and health care providers allocate health care resources more efficiently. OBJECTIVE: The purpose of this study was to assess the cost-effectiveness of extracorporeal photopheresis (ECP) compared with rituximab (Rmb) and with imatinib (Imt) in patients with cGvHD at 5 years from the perspective of the Spanish National Health System. METHODS: The model assessed the incremental cost-effectiveness/utility ratio of ECP versus Rmb or Imt for 1000 hypothetical patients by using microsimulation cost-effectiveness techniques. Model probabilities were obtained from the literature. Treatment pathways and adverse events were evaluated taking clinical opinion and published reports into consideration. Local data on costs (2010 Euros) and health care resources utilization were validated by the clinical authors. Probabilistic sensitivity analyses were used to assess the robustness of the model. RESULTS: The greater efficacy of ECP resulted in a gain of 0.011 to 0.024 quality-adjusted life-year in the first year and 0.062 to 0.094 at year 5 compared with Rmb or Imt. The results showed that the higher acquisition cost of ECP versus Imt was compensated for at 9 months by greater efficacy; this higher cost was partially compensated for ( 517) by year 5 versus Rmb. After 9 months, ECP was dominant (cheaper and more effective) compared with Imt. The incremental cost-effectiveness ratio of ECP versus Rmb was 29,646 per life-year gained and 24,442 per quality-adjusted life-year gained at year 2.5. Probabilistic sensitivity analysis confirmed the results. The main study limitation was that to assess relative treatment effects, only small studies were available for indirect comparison. CONCLUSION: ECP as a third-line therapy for cGvHD is a more cost-effective strategy than Rmb or Imt.

An integrated model of adoption and development of e-commerce in companies

Since the mid-1990s researchers have sought to understand why some firms embark on e-commerceoperations on the Internet while others prefer to wait and see how events unfold. We still have todetermine which variables contribute to explaining the extent to which firms use e-commerce, giventhat to date the literature has not yet offered conclusive evidence on this question. The current workaims to provide an integrated vision of the set of factors influencing the e-commerce adoptionprocess. We use a sample of 2,038 firms of all types that trade their products either with otherorganizations or with end-consumers.

Mobile Subscription Acquisition and Retention Costs - An Actvity-Based Model

The objective of this master’s thesis was to develop a model for mobile subscription acquisition cost, SAC, and mobile subscription retention cost, SRC, by applying activity-based cost accounting principles. The thesis was conducted as a case study for a telecommunication company operating on the Finnish telecommunication market. In addition to activity-based cost accounting there were other theories studied and applied in order to establish a theory framework for this thesis. The concepts of acquisition and retention were explored in a broader context with the concepts of customer satisfaction, loyalty and profitability and eventually customer relationship management to understand the background and meaning of the theme of this thesis. The utilization of SAC and SRC information is discussed through the theories of decision making and activity-based management. Also, the present state and future needs of SAC and SRC information usage at the case company as well as the functions of the company were examined by interviewing some members of the company personnel. With the help of these theories and methods it was aimed at finding out both the theory-based and practical factors which affect the structure of the model. During the thesis study it was confirmed that the existing SAC and SRC model of the case company should be used as the basis in developing the activity-based model. As a result the indirect costs of the old model were transformed into activities and the direct costs were continued to be allocated directly to acquisition of new subscriptions and retention of old subscriptions. The refined model will enable managing the subscription acquisition, retention and the related costs better through the activity information. During the interviews it was found out that the SAC and SRC information is also used in performance measurement and operational and strategic planning. SAC and SRC are not fully absorbed costs and it was concluded that the model serves best as a source of indicative cost information. This thesis does not include calculating costs. Instead, the refined model together with both the theory-based and interview findings concerning the utilization of the information produced by the model will serve as a framework for the possible future development aiming at completing the model.

Improving Evaluation and Development Capability in Verification and Validation

Validation and verification operations encounter various challenges in product development process. Requirements for increasing the development cycle pace set new requests for component development process. Verification and validation usually represent the largest activities, up to 40 50 % of R&D resources utilized. This research studies validation and verification as part of case company's component development process. The target is to define framework that can be used in improvement of the validation and verification capability evaluation and development in display module development projects. Validation and verification definition and background is studied in this research. Additionally, theories such as project management, system, organisational learning and causality is studied. Framework and key findings of this research are presented. Feedback system according of the framework is defined and implemented to the case company. This research is divided to the theory and empirical parts. Theory part is conducted in literature review. Empirical part is done in case study. Constructive methode and design research methode are used in this research A framework for capability evaluation and development was defined and developed as result of this research. Key findings of this study were that double loop learning approach with validation and verification V+ model enables defining a feedback reporting solution. Additional results, some minor changes in validation and verification process were proposed. There are a few concerns expressed on the results on validity and reliability of this study. The most important one was the selected research method and the selected model itself. The final state can be normative, the researcher may set study results before the actual study and in the initial state, the researcher may describe expectations for the study. Finally reliability of this study, and validity of this work are studied.

A Development and Application of a Three-Dimensional Model for a CFB Gasifier

The developing energy markets and rising energy system costs have sparked the need to find new forms of energy production and increase the self-sufficiency of energy production. One alternative is gasification, whose principles have been known for decades, but it is only recently when the technology has become a true alternative. However, in order to meet the requirements of modern energy production methods, it is necessary to study the phenomenon thoroughly. In order to understand the gasification process better and optimize it from the viewpoint of ecology and energy efficiency, it is necessary to develop effective and reliable modeling tools for gasifiers. The main aims of this work have been to understand gasification as a process and furthermore to develop an existing three-dimensional circulating fluidized bed modeling tool for modeling of gasification. The model is applied to two gasification processes of 12 and 50 MWth. The results of modeling and measurements have been compared and subsequently reviewed. The work was done in co-operation with Lappeenranta University of Technology and Foster Wheeler Energia Oy.

Development of a weather-based model for Botrytis leaf blight of onion

ABSTRACT In the present study, onion plants were tested under controlled conditions for the development of a climate model based on the influence of temperature (10, 15, 20 and 25°C) and leaf wetness duration (6, 12, 24 and 48 hours) on the severity of Botrytis leaf blight of onion caused by Botrytis squamosa. The relative lesion density was influenced by temperature and leaf wetness duration (P <0.05). The disease was most severe at 20°C. Data were subjected to nonlinear regression analysis. Beta generalized function was used to adjust severity and temperature data, while a logistic function was chosen to represent the effect of leaf wetness on the severity of Botrytis leaf blight. The response surface obtained by the product of two functions was expressed as ES = 0.008192 * (((x-5)1.01089) * ((30-x)1.19052)) * (0.33859/(1+3.77989 * exp (-0.10923*y))), where ES represents the estimated severity value (0.1); x, the temperature (°C); and y, the leaf wetness (in hours). This climate model should be validated under field conditions to verify its use as a computational system for the forecasting of Botrytis leaf blight in onion.