Creating a common approach to safety management through structured training development

The successful management of workplace safety has many benefits for employees, employers and the community. Similar to other areas of job performance, safety performance can be enhanced through appropriate and well-designed training. The foundation of the development of effective training is a thorough training needs analysis (TNA). Currently, the application of psychometrically valid TNA practices for the management of workplace safety is an under-researched topic and limited guidance is available for implementing appropriate strategies. To address this gap in the literature, this chapter will provide an overview of TNA practices, including the purpose and benefits associated with implementing the systematic procedure. A case study will then be presented to illustrate how the TNA process was successfully applied to investigate the training needs of Australasian rail incident investigators to achieve an industry-approved national training package. Recommendations will be made to assist practitioners with implementing TNA practices with the goal of enhancing workplace safety management through targeted workforce development.

Inclusion?

Whilst inclusive education is a relatively recent advance in our thinking about schooling and pedagogy, it is rapidly establishing movement simultaneously reflected in and refracted by education policy, research, and scholarship. This is manifest in the proliferation of policy texts and programmes generated by education jurisdictions globally and locally, and in the burgeoning number of scholarly texts, academic conferences, and research grants dedicated to inclusive education.

Protection by methylproamine of irradiated human keratinocytes correlates with reduction of DNA damage

Purpose: The therapeutic ratio for ionising radiation treatment of tumour is a trade-off between normal tissue side-effects and tumour control. Application of a radioprotector to normal tissue can reduce side-effects. Here we study the effects of a new radioprotector on the cellular response to radiation. Methylproamine is a DNA-binding radioprotector which, on the basis of published pulse radiolysis studies, acts by repair of transient radiation-induced oxidative species on DNA. To substantiate this hypothesis, we studied protection by methylproamine at both clonogenic survival and radiation-induced DNA damage, assessed by γH2AX (histone 2AX phosphorylation at serine 139) focus formation endpoints. Materials and methods: The human keratinocyte cell line FEP1811 was used to study clonogenic survival and yield of γH2AX foci following irradiation (137Cs γ-rays) of cells exposed to various concentrations of methylproamine. Uptake of methylproamine into cell nuclei was measured in parallel. Results: The extent of radioprotection at the clonogenic survival endpoint increased with methylproamine concentration up to a maximum dose modification factor (DMF) of 2.0 at 10 μM. At least 0.1 fmole/nucleus of methylproamine is required to achieve a substantial level of radioprotection (DMF of 1.3) with maximum protection (DMF of 2.0) achieved at 0.23 fmole/nucleus. The γH2AX focus yield per cell nucleus 45 min after irradiation decreased with drug concentration with a DMF of 2.5 at 10 μM. Conclusions: These results are consistent with the hypothesis that radioprotection by methylproamine is mediated by attenuation of the extent of initial DNA damage.

Methylproamine protects against ionizing radiation by preventing DNA double-strand breaks

Purpose The majority of cancer patients will receive radiotherapy (RT), therefore, investigations into advances of this modality are important. Conventional RT dose intensities are limited by adverse responses in normal tissues and a primary goal is to ameliorate adverse normal tissue effects. The aim of these experiments is to further our understanding regarding the mechanism of radioprotection by the DNA minor groove binder, methylproamine, in a cellular context at the DNA level. Materials and methods We used immunocytochemical methods to measure the accumulation of phosphorylated H2AX (γH2AX) foci following ionizing radiation (IR) in patient-derived lymphoblastoid cells exposed to methylproamine. Furthermore, we performed pulsed field gel electrophoresis DNA damage and repair assays to directly interrogate the action of methylproamine on DNA in irradiated cells. Results We found that methylproamine-treated cells had fewer γH2AX foci after IR compared to untreated cells. Also, the presence of methylproamine decreased the amount of lower molecular weight DNA entering the gel as shown by the pulsed field gel electrophoresis assay. Conclusions These results suggest that methylproamine acts by preventing the formation of DNA double-strand breaks (dsbs) and support the hypothesis that radioprotection by methylproamine is mediated, at least in part, by decreasing initial DNA damage.

Going live : building academic capacity in blended learning using web-conferencing technologies

This paper reports on a current initiative at Queensland University of Technology to provide timely, flexible and sustainable training and support to academic staff in blended learning and associated techno-pedagogies via a web-conferencing classroom and collaboration tool, Elluminate Live!. This technology was first introduced to QUT in 2008 as part of the university‘s ongoing commitment to meeting the learning needs of diverse student cohorts. The centralised Learning Design team, in collaboration with the university‘s department of eLearning Services, was given the task of providing training and support to academic staff in the effective use of the technology for teaching and learning, as part of the team‘s ongoing brief to support and enhance the provision of blended learning throughout the university. The resulting program, ―Learning Design Live‖ (LDL) is informed by Rogers‘ theory of innovation and diffusion (2003) and structured according to Wilson‘s framework for faculty development (2007). This paper discusses the program‘s design and structure, considers the program‘s impact on academic capacity in blended learning within the institution, and reflects on future directions for the program and emerging insights into blended learning and participant engagement for both staff and students.

Dynamic digital posters : making the most of collaborative learning spaces

Academic and professional staff at Queensland University of Technology (QUT) have been faced with the challenge of how to create engaging student experiences in collaborative learning spaces. In 2013 a new Bachelor of Science course was implemented focusing on inquiry-based, collaborative and active learning. Student groups in two of the first year units carried out a poster assessment task. This paper provides a preliminary evaluation of the assessment approach used, whereby students created dynamic digital posters to capitalise on the affordances of the learning space.

A time for everything : reviewing an institution’s virtual learning environment

This paper outlines a review carried out at Queensland University of Technology (QUT) in 2013 to identify the extent to which the centrally supported virtual learning environment met current and future learning and teaching needs. A range of consultation and investigation activities occurred from May to November to encourage open stakeholder feedback as well as to allow for reflection on alternative digital technologies, systems and strategies. This resulted in the development of nine recommendations, which, following a planning phase, will commence being implemented from mid-2014.

In the right space : exploring the dynamics between design, environment and pedagogy

The environments that we inhabit shape our everyday lives, influencing our behaviors and responses (Manu, 2013). As we enter an immersive phase of education in which physical and digital environments become inseparable, should we reconsider the role and importance of design on pedagogical practice? This paper explores the reciprocal cause and effect of space, technology and pedagogy in shaping the design of educational experiences within Queensland University of Technology's collaborative learning spaces.

Designing for collaborative learning spaces : an academic staff development pilot program

To prepare for the delivery of new Bachelor of Science units in collaborative learning spaces, academic and professional staff at Queensland University of Technology piloted an academic development program over the period of a semester. The program was informed by Rogers’ theory of innovation and diffusion (2003) and structured according to Wilson’s framework for faculty development (2007). Through a series of workshops and group mentoring activities, the program modelled inquiry-based learning in a collaborative learning space, and the participants designed and practiced the delivery of teaching activities. This paper provides a preliminary evaluation of the effectiveness of the pilot based on survey responses from participants, notes from the development team who coordinated the program and audience feedback from the final showcase session. The design and structure of the program is discussed as well as possible future directions.

CoWs, Google and online possibilities : creating digital posters to enhance student engagement

A new Bachelor of Science (BSc) course was introduced at Queensland University of Technology (QUT) in 2013 and focused on inquiry-based, collaborative and active learning. Two of the first year units required that students carry out a group poster assessment task. This poster provides a preliminary evaluation from an academic staff perspective of the assessment approach used, whereby students created digital posters to utilise the affordances of new learning spaces. The digital posters approach was first introduced to a group of academic staff from the Science and Engineering Faculty (SEF) in 2012 during a professional development program to explicitly develop skills and shared understandings of teaching in collaborative learning spaces (Steel & Andrews, 2012). Considerations were given to the pedagogical requirements of a poster assessment task, the affordances of the learning space and an identification of possible benefits of using Google Sites to create digital posters. Positive feedback from this group (as highlighted in the quotes shown) and subsequent approval from unit coordinators for two of the new first year BSc units meant that the approach was adopted for Semester 1, 2013 with approximately 360 students in each unit.

Energy Efficiency Resources for Undergraduate Engineering Education: Final Report

This report presents the findings of an investigation of energy efficiency resources for undergraduate engineering education, undertaken by web-based research, conversations with educators, and a university survey. The investigation draws on the results of a number of previous investigations undertaken by the research team for NFEE related to energy efficiency education and presents the following findings and recommendations, as explained in greater detail in the body of the report. The findings suggest that even though certain EE concepts and principles have been identified by lecturers as being important there is little to no coverage of a number of these concepts in some programs/courses. Similarly, many topics relating to the most important EE workforce skills and significant shortages as identified in industry research, do not rate highly in terms of both perceived importance by lecturers, or coverage within existing courses. Overall, these findings suggest that despite growing awareness of the importance of EE in both industry and academia, the current depth and breadth of EE content in courses does not reflect this. It confirms that efforts in these areas can be better supported.

Energy Efficiency Graduate Attributes Project: Final Report

The Energy Efficiency (EE) Graduate Attributes Project focuses on engineering as a priority profession that has a significant role to play in addressing energy demand and supply issues in Australia. Specifically, this project aims to support embedding EE knowledge and skills throughout the engineering undergraduate curriculum, to help build capacity within the Australian workforce across major sectors of the economy, from mining, manufacturing and industrial applications to design, construction, maintenance and retrofitting built environments. The resultant report is intended to assist in future consultation with key groups such as Engineers Australia (EA), the Australian Council of Engineering Deans (ACED) and the eight EA colleges, to support systemic curriculum renewal and promote the design and development of high quality EE engineering education resources. The project is based on a whole-of-program outcomes-based approach to curriculum renewal, creating a transparent framework for integrating EE. This comprises collaborative consideration by academics and professional engineers who have experience in teaching and practising EE, to identify what students should learn to be equipped with relevant competencies by the time they graduate.