Topological stability through tame retractions

A smooth map is said to be stable if small perturbations of the map only differ from the original one by a smooth change of coordinates. Smoothly stable maps are generic among the proper maps between given source and target manifolds when the source and target dimensions belong to the so-called nice dimensions, but outside this range of dimensions, smooth maps cannot generally be approximated by stable maps. This leads to the definition of topologically stable maps, where the smooth coordinate changes are replaced with homeomorphisms. The topologically stable maps are generic among proper maps for any dimensions of source and target. The purpose of this thesis is to investigate methods for proving topological stability by constructing extremely tame (E-tame) retractions onto the map in question from one of its smoothly stable unfoldings. In particular, we investigate how to use E-tame retractions from stable unfoldings to find topologically ministable unfoldings for certain weighted homogeneous maps or germs. Our first results are concerned with the construction of E-tame retractions and their relation to topological stability. We study how to construct the E-tame retractions from partial or local information, and these results form our toolbox for the main constructions. In the next chapter we study the group of right-left equivalences leaving a given multigerm f invariant, and show that when the multigerm is finitely determined, the group has a maximal compact subgroup and that the corresponding quotient is contractible. This means, essentially, that the group can be replaced with a compact Lie group of symmetries without much loss of information. We also show how to split the group into a product whose components only depend on the monogerm components of f. In the final chapter we investigate representatives of the E- and Z-series of singularities, discuss their instability and use our tools to construct E-tame retractions for some of them. The construction is based on describing the geometry of the set of points where the map is not smoothly stable, discovering that by using induction and our constructional tools, we already know how to construct local E-tame retractions along the set. The local solutions can then be glued together using our knowledge about the symmetry group of the local germs. We also discuss how to generalize our method to the whole E- and Z- series.

Traditional medicinal uses and biological activities of some plant extracts of African Combretum Loefl., Terminalia L. and Pteleopsis Engl. species

In Africa various species of Combretum, Terminalia and Pteleopsis are used in traditional medicine. Despite of this, some species of these genera have still not been studied for their biological effects to validate their traditional uses. The aim of this work has been to document the ethnomedicinal uses of several species of Combretum and Terminalia in Mbeya region, south-western Tanzania, and to use this information for finding species with good antimicrobial and cytotoxic potential. During a five weeks expedition to Tanzania in spring 1999 sixteen different species of Combretum and Terminalia, as well as Pteleopsis myrtifolia were collected from various locations in the districts of Mbeya, Iringa and Dar-es-Salaam. Traditional healers in seven different villages in the Mbeya region were interviewed in Swahili and Nyakyusa on the medicinal uses of Combretum and Terminalia species shown to them. A questionnaire was used during the interviews. The results of the interviews correlated well between different villages, the same species being used in similar ways in different villages. Of the ten species shown to the healers six were frequently used for treatment of skin diseases, bacterial infections, diarrhea, oedema and wounds. The dried plants were most commonly prepared into hot water decoctions or mixed into maize porridge, Ugali. Infusions made from dried or fresh plant material were also common. Wounds and topical infections were treated with ointments made from the dried plant material mixed with sheep fat. Twenty-one extracts of six species of Combretum and four of Terminalia, collected from Tanzania, were screened for their antibacterial effects against two gram-negative and five gram-positive bacteria, as well as the yeast, Candida albicans, using an agar diffusion method. Most of the screened plants showed substantial antimicrobial activity. A methanolic root extract of T. sambesiaca showed the most potent antibacterial effects of all the plant species screened, and gave a MIC value of 0.9 mg/ml against Enterobacter aerogenes. Also root extracts of T. sericea and T. kaiserana gave excellent antimicrobial effects, and notably a hot water extract of T. sericea was as potent as extracts of this species made from EtOH and MeOH. Thus, the traditional way of preparing T. sericea into hot water decoctions seems to extract antimicrobial compounds. Thirty-five extracts of five species of Terminalia, ten of Combretum and Pteleopsis myrtifolia were screened for their antifungal effects against five species of yeast (Candida spp.) and Cryptococcus neoformans. The species differed from each other to their antifungal effects, some being very effective whereas others showed no antifungal effects. The most effective extracts showed antifungal effects comparable to the standard antibiotics itraconazol and amphotericin B. Species of Terminalia gave in general stronger antifungal effects than those of Combretum. The best effects were obtained with methanolic root extracts of T. sambesiaca, T. sericea and T. kaiserana, and this investigation indicates that decoctions of these species might be used for treatment of HIV-related fungal infections. Twenty-seven crude extracts of eight species of Combretum, five of Terminalia and Pteleopsis myrtifolia were evaluated for their cytotoxic effects against human cancer cell lines (HeLa, cervical carcinoma; MCF 7, breast carcinoma, T 24 bladder carcinoma) and one endothelial cell line (BBCE, bovine brain capillary endothelial cells). The most outstanding effects were obtained with a leaf extract of Combretum fragrans, which nearly totally inhibited the proliferation of T 24 and HeLa cells at a concentration of 25 ug/ml and inhibited 60 % of the growth of the HeLa cells at a concentration of 4.3 ug/ml. The species of Terminalia were less cytotoxically potent than the Combretum species, although T. sericea and T. sambesiaca gave good cytotoxic effects (< 30 % proliferation). In summary this study indicates that some of the species of Terminalia, Combretum and Pteleopsis, used in Tanzanian traditional medicine, are powerful inhibitors of both microbial and cancer cell growth. In depth studies would be needed to find the active compounds behind these biological activities.

Conceptual and statistical modelling of environmental effects in population dynamics

Population dynamics are generally viewed as the result of intrinsic (purely density dependent) and extrinsic (environmental) processes. Both components, and potential interactions between those two, have to be modelled in order to understand and predict dynamics of natural populations; a topic that is of great importance in population management and conservation. This thesis focuses on modelling environmental effects in population dynamics and how effects of potentially relevant environmental variables can be statistically identified and quantified from time series data. Chapter I presents some useful models of multiplicative environmental effects for unstructured density dependent populations. The presented models can be written as standard multiple regression models that are easy to fit to data. Chapters II IV constitute empirical studies that statistically model environmental effects on population dynamics of several migratory bird species with different life history characteristics and migration strategies. In Chapter II, spruce cone crops are found to have a strong positive effect on the population growth of the great spotted woodpecker (Dendrocopos major), while cone crops of pine another important food resource for the species do not effectively explain population growth. The study compares rate- and ratio-dependent effects of cone availability, using state-space models that distinguish between process and observation error in the time series data. Chapter III shows how drought, in combination with settling behaviour during migration, produces asymmetric spatially synchronous patterns of population dynamics in North American ducks (genus Anas). Chapter IV investigates the dynamics of a Finnish population of skylark (Alauda arvensis), and point out effects of rainfall and habitat quality on population growth. Because the skylark time series and some of the environmental variables included show strong positive autocorrelation, the statistical significances are calculated using a Monte Carlo method, where random autocorrelated time series are generated. Chapter V is a simulation-based study, showing that ignoring observation error in analyses of population time series data can bias the estimated effects and measures of uncertainty, if the environmental variables are autocorrelated. It is concluded that the use of state-space models is an effective way to reach more accurate results. In summary, there are several biological assumptions and methodological issues that can affect the inferential outcome when estimating environmental effects from time series data, and that therefore need special attention. The functional form of the environmental effects and potential interactions between environment and population density are important to deal with. Other issues that should be considered are assumptions about density dependent regulation, modelling potential observation error, and when needed, accounting for spatial and/or temporal autocorrelation.

Theoretical Studies on Coupled Electron and Proton Transfer in Cytochrome c Oxidase

The complexity of life is based on an effective energy transduction machinery, which has evolved during the last 3.5 billion years. In aerobic life, the utilization of the high oxidizing potential of molecular oxygen powers this machinery. Oxygen is safely reduced by a membrane bound enzyme, cytochrome c oxidase (CcO), to produce an electrochemical proton gradient over the mitochondrial or bacterial membrane. This gradient is used for energy-requiring reactions such as synthesis of ATP by F0F1-ATPase and active transport. In this thesis, the molecular mechanism by which CcO couples the oxygen reduction chemistry to proton-pumping has been studied by theoretical computer simulations. By building both classical and quantum mechanical model systems based on the X-ray structure of CcO from Bos taurus, the dynamics and energetics of the system were studied in different intermediate states of the enzyme. As a result of this work, a mechanism was suggested by which CcO can prevent protons from leaking backwards in proton-pumping. The use and activation of two proton conducting channels were also enlightened together with a mechanism by which CcO sorts the chemical protons from pumped protons. The latter problem is referred to as the gating mechanism of CcO, and has remained a challenge in the bioenergetics field for more than three decades. Furthermore, a new method for deriving charge parameters for classical simulations of complex metalloenzymes was developed.

Molecular Alterations in Asbestos-Related Lung Cancer

Background: Asbestos is a well known cancer-causing mineral fibre, which has a synergistic effect on lung cancer risk in combination with tobacco smoking. Several in vitro and in vivo experiments have demonstrated that asbestos can evoke chromosomal damage and cause alterations as well as gene expression changes. Lung tumours, in general, have very complex karyotypes with several recurrently gained and lost chromosomal regions and this has made it difficult to identify specific molecular changes related primarily to asbestos exposure. The main aim of these studies has been to characterize asbestos-related lung cancer at a molecular level. Methods: Samples from asbestos-exposed and non-exposed lung cancer patients were studied using array comparative genomic hybridization (aCGH) and fluorescent in situ hybridization (FISH) to detect copy number alterations (CNA) as well as microsatellite analysis to detect allelic imbalance (AI). In addition, asbestos-exposed cell lines were studied using gene expression microarrays. Results: Eighteen chromosomal regions showing differential copy number in the lung tumours of asbestos-exposed patients compared to those of non-exposed patients were identified. The most significant differences were detected at 2p21-p16.3, 5q35.3, 9q33.3-q34.11, 9q34.13-q34.3, 11p15.5, 14q11.2 and 19p13.1-p13.3 (p<0.005). The alterations at 2p and 9q were validated and characterized in detail using AI and FISH analysis in a larger study population. Furthermore, in vitro studies were performed to examine the early gene expression changes induced by asbestos in three different lung cell lines. The results revealed specific asbestos-associated gene expression profiles and biological processes as well as chromosomal regions enriched with genes believed to contribute to the common asbestos-related responses in the cell lines. Interestingly, the most significant region enriched with asbestos-response genes was identified at 2p22, close to the previously identified region showing asbestos-related CNA in lung tumours. Additionally, in this thesis, the dysregulated biological processes (Gene Ontology terms) detected in the cell line experiment were compared to dysregulated processes identified in patient samples in a later study (Ruosaari et al., 2008a). Commonly affected processes such as those related to protein ubiquitination, ion transport and surprisingly sensory perception of smell were identified. Conclusions: The identification of specific CNA and dysregulated biological processes shed some light on the underlying genes acting as mediators in asbestos-related lung carcinogenesis. It is postulated that the combination of several asbestos-specific molecular alterations could be used to develop a diagnostic method for the identification of asbestos-related lung cancer.

Growth and Modification of Cluster-Assembled Thin Films

Thin film applications have become increasingly important in our search for multifunctional and economically viable technological solutions of the future. Thin film coatings can be used for a multitude of purposes, ranging from a basic enhancement of aesthetic attributes to the addition of a complex surface functionality. Anything from electronic or optical properties, to an increased catalytic or biological activity, can be added or enhanced by the deposition of a thin film, with a thickness of only a few atomic layers at the best, on an already existing surface. Thin films offer both a means of saving in materials and the possibility for improving properties without a critical enlargement of devices. Nanocluster deposition is a promising new method for the growth of structured thin films. Nanoclusters are small aggregates of atoms or molecules, ranging in sizes from only a few nanometers up to several hundreds of nanometers in diameter. Due to their large surface to volume ratio, and the confinement of atoms and electrons in all three dimensions, nanoclusters exhibit a wide variety of exotic properties that differ notably from those of both single atoms and bulk materials. Nanoclusters are a completely new type of building block for thin film deposition. As preformed entities, clusters provide a new means of tailoring the properties of thin films before their growth, simply by changing the size or composition of the clusters that are to be deposited. Contrary to contemporary methods of thin film growth, which mainly rely on the deposition of single atoms, cluster deposition also allows for a more precise assembly of thin films, as the configuration of single atoms with respect to each other is already predetermined in clusters. Nanocluster deposition offers a possibility for the coating of virtually any material with a nanostructured thin film, and therein the enhancement of already existing physical or chemical properties, or the addition of some exciting new feature. A clearer understanding of cluster-surface interactions, and the growth of thin films by cluster deposition, must, however, be achieved, if clusters are to be successfully used in thin film technologies. Using a combination of experimental techniques and molecular dynamics simulations, both the deposition of nanoclusters, and the growth and modification of cluster-assembled thin films, are studied in this thesis. Emphasis is laid on an understanding of the interaction between metal clusters and surfaces, and therein the behaviour of these clusters during deposition and thin film growth. The behaviour of single metal clusters, as they impact on clean metal surfaces, is analysed in detail, from which it is shown that there exists a cluster size and deposition energy dependent limit, below which epitaxial alignment occurs. If larger clusters are deposited at low energies, or cluster-surface interactions are weaker, non-epitaxial deposition will take place, resulting in the formation of nanocrystalline structures. The effect of cluster size and deposition energy on the morphology of cluster-assembled thin films is also determined, from which it is shown that nanocrystalline cluster-assembled films will be porous. Modification of these thin films, with the purpose of enhancing their mechanical properties and durability, without destroying their nanostructure, is presented. Irradiation with heavy ions is introduced as a feasible method for increasing the density, and therein the mechanical stability, of cluster-assembled thin films, without critically destroying their nanocrystalline properties. The results of this thesis demonstrate that nanocluster deposition is a suitable technique for the growth of nanostructured thin films. The interactions between nanoclusters and their supporting surfaces must, however, be carefully considered, if a controlled growth of cluster-assembled thin films, with precisely tailored properties, is to be achieved.

Sticking and erosion at carbon-containing plasma-facing materials in fusion reactors

Controlled nuclear fusion is one of the most promising sources of energy for the future. Before this goal can be achieved, one must be able to control the enormous energy densities which are present in the core plasma in a fusion reactor. In order to be able to predict the evolution and thereby the lifetime of different plasma facing materials under reactor-relevant conditions, the interaction of atoms and molecules with plasma first wall surfaces have to be studied in detail. In this thesis, the fundamental sticking and erosion processes of carbon-based materials, the nature of hydrocarbon species released from plasma-facing surfaces, and the evolution of the components under cumulative bombardment by atoms and molecules have been investigated by means of molecular dynamics simulations using both analytic potentials and a semi-empirical tight-binding method. The sticking cross-section of CH3 radicals at unsaturated carbon sites at diamond (111) surfaces is observed to decrease with increasing angle of incidence, a dependence which can be described by a simple geometrical model. The simulations furthermore show the sticking cross-section of CH3 radicals to be strongly dependent on the local neighborhood of the unsaturated carbon site. The erosion of amorphous hydrogenated carbon surfaces by helium, neon, and argon ions in combination with hydrogen at energies ranging from 2 to 10 eV is studied using both non-cumulative and cumulative bombardment simulations. The results show no significant differences between sputtering yields obtained from bombardment simulations with different noble gas ions. The final simulation cells from the 5 and 10 eV ion bombardment simulations, however, show marked differences in surface morphology. In further simulations the behavior of amorphous hydrogenated carbon surfaces under bombardment with D^+, D^+2, and D^+3 ions in the energy range from 2 to 30 eV has been investigated. The total chemical sputtering yields indicate that molecular projectiles lead to larger sputtering yields than atomic projectiles. Finally, the effect of hydrogen ion bombardment of both crystalline and amorphous tungsten carbide surfaces is studied. Prolonged bombardment is found to lead to the formation of an amorphous tungsten carbide layer, regardless of the initial structure of the sample. In agreement with experiment, preferential sputtering of carbon is observed in both the cumulative and non-cumulative simulations

Local structure of water studied by Compton scattering

This thesis presents a novel application of x-ray Compton scattering to structural studies of molecular liquids. Systematic Compton-scattering experiments on water have been carried out with unprecedented accuracy at third-generation synchrotron-radiation laboratories. The experiments focused on temperature effects in water, the water-to-ice phase transition, quantum isotope effects, and ion hydration. The experimental data is interpreted by comparison with both model computations and ab initio molecular-dynamics simulations. Accordingly, Compton scattering is found to provide unique intra- and intermolecular structural information. This thesis thus demonstrates the complementarity of the technique to traditional real-space probes for studies on the local structure of water and, more generally, molecular liquids.

Methodological perspectives for register-based health system performance assessment : Developing a hip fracture monitoring system in Finland

The resources of health systems are limited. There is a need for information concerning the performance of the health system for the purposes of decision-making. This study is about utilization of administrative registers in the context of health system performance evaluation. In order to address this issue, a multidisciplinary methodological framework for register-based data analysis is defined. Because the fixed structure of register-based data indirectly determines constraints on the theoretical constructs, it is essential to elaborate the whole analytic process with respect to the data. The fundamental methodological concepts and theories are synthesized into a data sensitive approach which helps to understand and overcome the problems that are likely to be encountered during a register-based data analyzing process. A pragmatically useful health system performance monitoring should produce valid information about the volume of the problems, about the use of services and about the effectiveness of provided services. A conceptual model for hip fracture performance assessment is constructed and the validity of Finnish registers as a data source for the purposes of performance assessment of hip fracture treatment is confirmed. Solutions to several pragmatic problems related to the development of a register-based hip fracture incidence surveillance system are proposed. The monitoring of effectiveness of treatment is shown to be possible in terms of care episodes. Finally, an example on the justification of a more detailed performance indicator to be used in the profiling of providers is given. In conclusion, it is possible to produce useful and valid information on health system performance by using Finnish register-based data. However, that seems to be far more complicated than is typically assumed. The perspectives given in this study introduce a necessary basis for further work and help in the routine implementation of a hip fracture monitoring system in Finland.

Trust and Collectives

"Trust and Collectives" is a compilation of articles: (I) "On Rational Trust" (in Meggle, G. (ed.) Social Facts & Collective Intentionality, Dr. Hänsel-Hohenhausen AG (currently Ontos), 2002), (II) "Simulating Rational Social Normative Trust, Predictive Trust, and Predictive Reliance Between Agents" (M.Tuomela and S. Hofmann, Ethics and Information Technology 5, 2003), (III) "A Collective's Trust in a Collective's action" (Protosociology, 18-19, 2003), and (IV) "Cooperation and Trust in Group Contexts" (R. Tuomela and M.Tuomela, Mind and Society 4/1, 2005 ). The articles are tied together by an introduction that dwells deeply on the topic of trust. (I) presents a somewhat general version of (RSNTR) and some basic arguments. (II) offers an application of (RSNTR) for a computer simulation of trust.(III) applies (RSNTR) to Raimo Tuomela's "we-mode"collectives (i.e. The Philosophy of Social Practices, Cambridge University Press, 2002). (IV) analyzes cooperation and trust in the context of acting as a member of a collective. Thus, (IV) elaborates on the topic of collective agency in (III) and puts the trust account (RSNTR) to work in a framework of cooperation. The central aim of this work is to construct a well-argued conceptual and theoretical account of rational trust, viz. a person's subjectively rational trust in another person vis-à-vis his performance of an action, seen from a first-person point of view. The main method is conceptual and theoretical analysis understood along the lines of reflective equilibrium. The account of rational social normative trust (RSNTR), which is argued and defended against other views, is the result of the quest. The introduction stands on its own legs as an argued presentation of an analysis of the concept of rational trust and an analysis of trust itself (RSNTR). It is claimed that (RSNTR) is "genuine" trust and embedded in a relationship of mutual respect for the rights of the other party. This relationship is the growing site for trust, a causal and conceptual ground, but it is not taken as a reason for trusting (viz. predictive "trust"). Relevant themes such as risk, decision, rationality, control, and cooperation are discussed and the topics of the articles are briefly presented. In this work it is argued that genuine trust is to be kept apart from predictive "trust." When we trust a person vis-à-vis his future action that concerns ourselves on the basis of his personal traits and/or features of the specific situation we have a prediction-like attitude. Genuine trust develops in a relationship of mutual respect for the mutual rights of the other party. Such a relationship is formed through interaction where the parties gradually find harmony concerning "the rules of the game." The trust account stands as a contribution to philosophical research on central social notions and it could be used as a theoretical model in social psychology, economical and political science where interaction between persons and groups are in focus. The analysis could also serve as a model for a trust component in computer simulation of human action. In the context of everyday life the account clarifies the difference between predictive "trust" and genuine trust. There are no fast shortcuts to trust. Experiences of mutual respect for mutual rights cannot be had unless there is respect.

Personporträttet som tidningsgenre : En närläsningsstudie med fokus på innehållsliga teman, berättarkonventioner och kön

The thesis The portrait interview as a newspaper genre. A qualitative close reading focussing on topical motifs, conventions of narration, and gender defines the portrait interview as a newspaper genre and analyses how the personalities in the portraits are constructed textually. The main body of material consists of 107 portrait interviews in two morning newspapers, Dagens Nyheter (published in Stockholm, Sweden) and Hufvudstadsbladet (published in Swedish in Helsinki, Finland), during two one-week periods (week 46/1999 and week 38/2002). There is also complementary material of 59 portraits from four magazines. The study is carried out within the research traditions of journalistic genre studies, gender and journalism, and critical text analysis. It is comprised of a qualitative close reading focussing on content (topical motifs or themes), conventions of narration, and gender. The methods used to carry out the study are qualitative close reading and quantitative content analysis. The analysis identifies the stylistic elements that differentiate the portrait genre from other journalistic genres, as well as from the autobiographical genre, and explores what opportunities and limitations these elements present for the inclusion of even more women protagonists in the portrait genre. The portrait interview is an exception from the critical mission of journalism in general, with its position as a genre of politeness. Since a typical characteristic of the portrait interview genre is that it pays tribute to the protagonist, the genre reveals the kind of personalities and lives that are seen as admirable in society. Four levels of portrait interview are defined: the prototype portrait, the pure portrait, the hybrid portrait and the marginal portrait. The prototype is a raw version of a portrait that fulfils the criteria but may be lacking in content and stylistics. The pure portrait does not lack these qualities and resembles an ideal portrait. The hybrid is a borderline case which relates to another genre or is a mixture between the portrait and some other genre, most commonly the news genre. The marginal portrait does not fulfil the criteria, and can therefore be seen as an inadequate portrait. For example, obituaries and caricatures are excluded if the protagonist s voice is never quoted. The analysis resulted in three factors that in part help to explain why the portrait interview genre has somewhat more female protagonists than journalistic news texts do in general. The four main reasons why women are presented somewhat more in the portrait genre than in other journalistic genres are: (i) women are shown as exceptions to the female norm when, for example, taking a typical male job or managing in positions where there are few women; (ii) women are shown as representing female themes ; (iii) use of the double bind as a story-generating factor; and (iv) the intimisation of journalism. The double bind usually builds up the narration on female ambiguity in the contradiction between private and public life, for example family and career, personal desire and work. The intimisation of journalism and the double bind give women protagonists somewhat more publicity also because of the tendency of portrait interviews to create conflicts within the protagonist, as an exception to journalism in general where conflicts are created or seen as existing between, for example, persons, groupings or parties. Women protagonists and their lives create an optimal narration of inner conflicts originating in the double bind as men are usually not seen as suffering from these conflicts. The analysis also resulted in gendered portrait norms: The feminine portrait norm and the masculine portrait norm or more concretely, professional life and family life as expectation and exception. Women are expected to be responsible parents and mediocre professionals, while men are expected to be professionals and in their free time engaging fathers. Key words: journalism, genre, portrait interview, gender, interview, newspaper, women s magazine.

Vaggvisor i Kvevlax : Språkliga strukturer och konstruktioner

Lullabies in Kvevlax. Linguistic structures and constructions. The study is a linguistic analysis of constructions that shape the texts used in lullabies in Kvevlax in Ostrobothnia in Finland. The empirical goal is to identify linguistic constructions in traditional lullabies that make use of the dialect of the region. The theoretical goal was to test the usability of Construction Grammar (CxG) in analyses of this type of material, and to further develop the formal description of Construction Grammar in such a way as to make it possible to analyze all kinds of linguistically complex texts. The material that I collected in the 1960s comprises approximately 600 lullabies and concomitant interviews with the singers on the use of lullabies. In 1991 I collected additional material in Kvevlax. The number of informants is close to 250. Supplementary material covering the Swedish-language regions in Finland was compiled from the archives of the Society of Swedish Literature in Finland. The first part of the study is mainly based on traditional grammar and gives general information about the language and the structures used in the lullabies. In the detailed study of the Kvevlax lullabies in the latter part of the study I use a version of Construction Grammar intended for the linguistic analysis of usage-based texts. The analysis focuses on the most salient constructions in the lullabies. The study shows that Construction Grammar as a method has more general applicability than traditional linguistic methods. The study identifies important constructions, including elements typical of this genre, that structure the text in different variants of the same lullabies. In addition, CxG made it possible to study pragmatic aspects of the interactional, cultural and contextual language that is used in communication with small children. The constructions found in lullabies are also used in language in general. In addition to being able to give detailed linguistic descriptions of the texts, Construction Grammar can also explain the multidimensionality of language and the variations in the texts. The use of CxG made it possible to show that variations are not random but follow prototypical linguistic patterns, constructions. Constructions are thus found to be linguistic resources with built-in variation potentials.

Moralpanik eller förnuftslogik - i Jokela-fallets diskursiva efterdyningar

I denna pro gradu avhandling undersöker jag Jokela-fallets diskursiva efterdyningar utgående från ett moralpanikperspektiv. Syftet är att se huruvida reaktionerna på och förklaringarna till skolmassakern i Jokela kan anses präglas av moralpanik, samt vilka andra förklaringsmodeller som präglade den omfattande Jokela-debatten. Avhandling grundar sig på en kvalitativ diskursanalys av förklaringsmodellerna så som de presenterades i opinionstexter och insändare i Helsingin Sanomat hösten 2007. Jag analyserar hur den medierade Jokela-debatten utvecklades och formade perceptionerna om skolskjutningar, ungdomar och det finländska samhällstillståndet i stort. Jokela-fallet väckte starka reaktioner och rädsla. Man försökte förstå och förklara orsakerna till skottdramat. Flera olika förklaringsmodeller presenterades i medierna; en oro över ungdomens mentala hälsa och mobbning, webbens och populärkulturens farliga inflytande, det hårdnade samhällsklimatet och en försvagad välfärd, också den bristfälliga vapenlagstiftningen kritiserades. Den gemensamma nämnaren var att Jokela-fallet uppfattades som en indikator på hela samhällets tillstånd där en gemensam värdegrund och moral håller på att erodera. Mitt teoretiska perspektiv grundar sig främst på moralpanikteorier av Stanley Cohen och Chas Critcher som jag kopplar ihop med Ulrich Becks teori om risksamhället och Emile Durkheims anomiteori. Det här speglar jag mot bland annat Hille Koskelas forskning om rädslans kultur och trygghetssamhället, samt jämför med amerikansk forskning om skolskjutningar. Jokela-debatten formades främst av två dominerande diskurser: a) en rationaliseringsdiskurs som kännetecknas av att man försöker förklara Jokela-fallet genom förnuftsmässiga och logiska resonemang genom att peka på olika samhällsaspekter, b) en risk- och kontrolldiskurs som kännetecknas av moralpaniktendenser främst i form av oro över ungdomar, internet och försvagade samhällsnormer, samt krav på ökad social kontroll och reglering för att säkra trygghet och ordning i samhället. Jokela-fallet var inte ett klassiskt moralpanikfall, men fyllde många av kriterierna för moralpanik. Jokela-debatten uttryckte en rädslans kultur som genomsyrar dagens risksamhälle och som legitimerar ökad riskhantering och social kontroll, som försvar mot de hot och problem som samhället kollektivt upplever. Det ställdes krav på mera social kontroll och reglering på grund av upplevda hot mot samhällets normer och en försvagad moral, vilket är ett uttryck för moralpanik. Jokela-fallets diskursiva efterdyningar visar att tryggheten har blivit ett moraliskt imperativ. Trygghet har blivit något vi förutsätts eftersträva och som vi är färdiga att betala ett allt högre pris för, både mätt i pengar och i frihet.

Arbetsplatsens Betydelse - från Självklarhet till Medvetenhet

Varför är arbetsplatsen en plats? Arbetsplatsens betydelse diskuterar den självklarhet som ofta karakteriserar en vetenskaplig diskussion om arbetsplatsen och dess fysiska existens. Tyngdpunkten inom platsforskningen har kommit att långt ligga på platsens utformning, på dess innehåll och skeenden istället för på platsen i sig. Den snabba informationsteknologiska utvecklingen leder emellertid till att man kan ifrågasätta huruvida dagens traditionella arbetsplatser med deras fysiska attribut överhuvudtaget behövs. En frigörelse från rummets och tidens restriktioner skulle medföra att en fysisk arbetsplats inte längre kunde ses som självklar. I en situation där individen behåller arbetet som aktivitet men förlorar sin kontakt med den traditionella arbetsplatsen (blir arbetsplatslös) uppstår ett behov av att veta om man samtidigt förlorar något betydelsefullt. Bör värden överföras från den traditionella arbetsplatsen till arbete under mera virtuella och gränslösa villkor och i så fall vilka? Arbetsplatsens betydelse söker en förståelse för den betydelse arbetstagarna sätter vid sin arbetsplats och framförallt vid det faktum att den är en fysisk plats. Intervjuer med distansarbetare och traditionella kontorsarbetare visar att arbetsplatsen legitimerar arbetet, avgränsar arbetet, stöder arbetstagaren i arbetet och stöder arbetstagaren som människa. Detta är enligt dem svaret på varför det ligger ett värde i att traditionellt se och uppleva arbetsplatsen som en fysisk plats.

Hur den aktiva kunden konstruerar budskap - Ett synsätt inom relationskommunikation

Den här avhandlingen erbjuder ett nytt perspektiv på marknadskommunikation. Det nya är ett starkt kundfokus, där kunden är en aktiv medpart i kommunikationsprocessen. I det traditionella kommunikationsperspektivet har man sett kunden som ett objekt som blir utsatt för företagets olika åtgärder. Där har det varit företaget som stått för integreringen av de olika budskapen. I det här arbetet står kunden för integrationen och har därmed möjligheten att lägga till budskap eller lämna bort någonting väsentligt. I och med perspektivskiftet kan man upptäcka nya fenomen i kommunikation som inte tidigare beaktats i tillräcklig utsträckning. Eftersom det är kunden som står för den aktiva konstruktionen av budskap, kan kundens uppfattning vara en annan än den som företagen avsett. Kundens uppfattning kan beskrivas med hjälp av begreppen tydlig, otydlig och tyst kommunikation. Inom ramen för tyst kommunikation utvecklas ett nytt begrepp – passiv kommunikation – som kan öppna möjligheter för företag att minska på den aktiva kommunikationen med sina kunder. Även källorna till den här kommunikationen kan variera. Dylika källor kan lokaliseras till relation, händelse eller konsekvens. Dessa fenomen har sammanställts i en modell som kallas relationskommunikationsarenan. Kundernas uppfattningar varierar beroende på om det är fråga om relationskommunikation eller annan kommunikation. Dessa uppfattningar är strukturerade i två olika dimensioner: en tids- och en kontextdimension. Tidsdimensionen består av historiska och framtidsrelaterade faktorer och kontextdimensionen är en situationsdimension som består av interna, personliga faktorer och av externa faktorer i omgivningen. I relations-kommunikation förekommer faktorer från alla dimensioner. Modellen för denna struktur kallas den dynamiska kommunikationsmodellen. I avhandlingen utvecklas även en metod – kommunikationstopografi – med vars hjälp olika uppfattningar kan visualiseras på ett åskådligt sätt. Med topografierna kan olika budskap som annonser analyseras och tydliga, otydliga samt tysta budskap separeras. På motsvarande sätt kan även olika grupper av personer som uppfattar budskap på ett visst sätt särskiljas. Både budskap och personer analyseras här. Förekomsten av relationskommunikation kan i en del fall påvisas. Med kommunikationstopografi kan man visa hur den aktiva kunden konstruerar, lägger till eller lämnar bort budskap.