Kielikeskuksissa toimivien kieltenopettajien käsityksiä ja kokemuksia massayliopiston luomista haasteista

Challenges of mass university conceived and experienced by university language centre language teachers The massification of the university involved not only an expansion but also a transition from one period to another, from elite higher education to mass higher education. Massification cannot be viewed as expansion and structural change but it has to be viewed in a context of a number of changes involving universities, state, economy, society and culture as well as science, technology, education and research. In the Finnish academic context, massification is often associated with negative development and it may be used as an excuse for poor teaching. The objective of the present study is to find out how the mass context is manifested in the work of university language centre language teachers. The data were collected by means of semi-structured questionnaires from 32 language teachers working at language centres at the universities of Helsinki, Jyväskylä, Tampere and Turku in Finland. Both Finnish and native speakers, 6 male and 26 female teachers, were included. All the teachers in the study had taught more than 10 years. The data were complemented by interviews of four teachers and email data from one teacher. Phenomenographic analysis of the informants’ conceptions enabled a description of their experiences of students at a mass university, conceptions of teaching and learning and of issues related to work health. Some conceptions were consonant with earlier results. The conceptions revealed differences between two teacher groups, teachers of subject-specific language, or language for specific purposes (LSP), and teachers of elementary and advanced language courses (general language teachers). For the first, the conceptions of the investigated teachers provided a picture of the students as a member of a mass university. The students were seen as customers who demanded special services to facilitate their studies or were selective about the contents of the course. The finding that appeared only in the LSP teachers’ data was the unengaged attitude towards language study, which appeared as mere hunt for credits. On the other hand, the students were also seen as language learning individuals, but a clear picture of a truly interested language learner was evident in the data of general language teachers. The teachers’ conceptions of teaching and learning revealed a picture of experienced teachers with a long background of teaching, reflecting experiences from different time periods and influences from their own education and illustrating the increasing problems with organizing individual tutoring due to large, heterogeneous groups. It seemed, however, that in spite of the large student groups, general language teachers were able to support the students’ learning processes and to use learner-centred methods, whereas LSP teachers were frequently compelled to resort to knowledge transmission type of teaching. The conditions of the mass university were clearly manifested in the respondents’ conceptions about work satisfaction: there were a number of factors related to administration, teaching arrangements and the status of the language centres that were likely to add to the teachers’ work stress, whereas traditional characteristics of academic work were viewed as promoting work satisfaction. On the basis of the teachers’ conceptions, it is safe to assume that academic mass context and students’ orientations have an effect on the teacher’s approach to teaching, while there is no unequivocal association between mass university teaching and poor teaching.

Marketing culture of Finnish research libraries : an analysis of marketing attitude, knowledge and behaviour

The aim of the present dissertation is to investigate the marketing culture of research libraries in Finland and to understand the awareness of the knowledge base of library management concerning modern marketing theories and practices. The study was based onthe notion that a leader in an organisation can have large impact on its culture. Therefore, it was considered important to learn about the market orientation that initiates at the top management and flows throughout the whole organisationthus resulting in a particular kind of library culture. The study attempts to examine the marketing culture of libraries by analysing the marketing attitudes, knowledge (underlying beliefs, values and assumptions), behaviour (market orientation), operational policies and activities, and their service performance (customer satisfaction). The research was based on the assumption that if the top management of libraries has market oriented behaviour, then their marketing attitudes, knowledge, operational policies and activities and service performance should also be in accordance. The dissertation attempts to connect all these theoretical threads of marketing culture. It investigates thirty three academic and special libraries in the south of Finland. The library director and three to ten customers from each library participated as respondents in this study. An integrated methodological approach of qualitative as well as quantitative methods was used to gain knowledge on the pertinent issues lying behind the marketing culture of research libraries. The analysis of the whole dissertation reveals that the concept of marketing has very varied status in the Finnish research libraries. Based on the entire findings, three kinds of marketing cultures were emerged: the strong- the high fliers; the medium- the brisk runners; and the weak- the slow walkers. The high fliers appeared to be modern marketing believers as their marketing approach was customer oriented and found to be closer to the emerging notions of contemporary relational marketing. The brisk runners were found to be traditional marketing advocates as their marketing approach is more `library centred¿than customer defined and thus is in line of `product orientation¿ i.e. traditional marketing. `Let the interested customers come to the library¿ was appeared to be the hallmark of the slow walkers. Application of conscious market orientation is not reflected in the library activities of the slow walkers. Instead their values, ideology and approach to serving the library customers is more in tuneof `usual service oriented Finnish way¿. The implication of the research is that it pays to be market oriented which results in higher customer satisfaction oflibraries. Moreover, it is emphasised that the traditional user based service philosophy of Finnish research libraries should not be abandoned but it needs to be further developed by building a relational based marketing system which will help the libraries to become more efficient and effective from the customers¿ viewpoint. The contribution of the dissertation lies in the framework showing the linkages between the critical components of the marketing culture of a library: antecedents, market orientation, facilitators and consequences. The dissertationdelineates the significant underlying dimensions of market-oriented behaviour of libraries which are namely customer philosophy, inter-functional coordination,strategic orientation, responsiveness, pricing orientation and competition orientation. The dissertation also showed the extent to which marketing attitudes, behaviour, knowledge were related and impact of market orientation on the serviceperformance of libraries. A strong positive association was found to exist between market orientation and marketing attitudes and knowledge. Moreover, it also shows that a higher market orientation is positively connected with the service performance of libraries, the ultimate result being higher customer satisfaction. The analysis shows that a genuine marketing culture represents a synthesis of certain marketing attitudes, knowledge and of selective practices. This finding is particularly significant in the sense that it manifests that marketing culture consists of a certain sets of beliefs and knowledge (which form a specific attitude towards marketing) and implementation of a certain set of activities that actually materialize the attitude of marketing into practice (market orientation) leading to superior service performance of libraries.

Career satisfaction among medical school professors: a case study in Brazil

OBJECTIVE: To investigate the career satisfaction of medical school professors in relation to initial motivation, satisfaction factors, and the desire to remain in the profession. METHODOLOGY: A qualitative methodology was used, based on questionnaires and semi-structured interviews with faculty members at a federal institution of higher education in Brazil. RESULTS: For 42.86% of the sample, teaching began while they were medical students; 80% had chosen teaching either as a vocation or due to influence from families or professors; 20% chose teaching as a professional opportunity. The majority, 57.14%, stated they were happy with teaching, and 51.42% did not plan to leave the career. Factors involved in satisfaction with teaching were: the possibility of remaining up-to-date in the medical profession, the feeling of doing their duty, their contribution to training future doctors, and contact with young people and the university setting. Factors leading to dissatisfaction were pedagogical (33.33%), economic (30.95%), institutional (14.28%), and relational (14.28%). CONCLUSIONS: Subjects expressed a positive attitude towards teaching, and because of their great personal satisfaction with the career, they did not plan to leave it. These findings should shed light on factors that interfere with career satisfaction and help increase those that promote satisfaction, thus improving the productivity and well-being of medical professors.

Measuring Processes of a New Packaging Solutions with the Balanced Scorecard, case DigiCup

The aim of this study was to create a Balanced Scorecard to the DigiCup solution. The first goal was to create process descriptions to the few critical processes. The second goal was to define appropriate measurements, according to customer survey as well as following the Balanced Scorecard process description, to manage the critical success factors. The overall goal of this study was to create a performance measurement system for the solution which guides the operation towards continuous improvement. This study was conducted by using both qualitative and quantitative methods, and the analysis was done by using a case study method. The material was gathered from the current customers, the management and the employees using structured, semi-structured and open group and individual interviews. The current customers were divided into retailers and direct customers of the DigiCup solution. The questions which the customers were asked were related to the information about interviewee, company, business strategy, market, satisfaction survey and future requirements. The management defined the strategy and took part in specifying the perspectives, objectives and measurements to the Balanced Scorecard of the DigiCup solution. The employees participated into the choosing of the metrics. The material consisted from altogether sixteen interviews. At the beginning of the study the product development, the order-delivery as well as the printing processes was chosen to be the critical processes of the DigiCup solution. These processes were concentrated on already in the literature review while trying to find the characteristics of these processes as well as the critical success factors and the appropriate measurements, which could be utilized when creating the Balanced Scorecard to the DigiCup solution according to the customer survey. The appropriate perspectives, objectives and measurements were found to the DigiCup solution. The chosen measures works as a basis for the development of IT-reporting tool. As a conclusion it can be stated that when discussing a new business, where the objectives are changing according to which development’s phases the company is in, the measurement should be updated often enough.

Tuoretuotteiden hävikin hallinta päivittäistavarakaupassa – case-tutkimus

Tämän tutkielman tarkoituksena on löytää toimivia ratkaisuja päivittäista-varakaupan hävikin hallitsemiseksi ja kannattavuuden parantamiseksi. Kohdeyrityksenä on myymälä, joka etsii keinoja toimintansa tehostami-seen nimenomaan päiväyshävikkiä silmällä pitäen. Päiväyshävikin synty-minen on ongelmallisinta erityisesti tuoretuotteiden osastoilla, joille asettuu paineita asiakkaiden vaatiman tuoreuden ja valikoiman laajuuden kautta. Hävikkiä ei voida ratkaista vähentämällä tilausmääriä, sillä tässä tapauk-sessa hyllyt ovat usein tyhjiä ja kohdataan toinen päivittäistavarakaupalle vaarallinen ongelma. Kannattavan toiminnan avaimina ovat siis tasapai-noilu hävikin aiheuttamien kustannusten ja menetetyn myynnin välillä. Tutkimuksen tulokset osoittavat, että hävikin hallinta on monien tekijöiden summa ja että kannattavuuden parantamiseksi on omaa toimintaa tarkas-teltava kokonaisuutena. Toiminnan kannattavuuden taustalla on aina asiakkaiden tyytyväisyys ja sen edistämiseksi on syytä tehdä töitä.

Effects of Country of Origin on Consumer Product Evaluations: Finnish clothing products in the minds of Russian tourists

Companies operating in today’s highly internationalized markets consider product differentiation the key priority in pursue to attain a constant competitive advantage in challenging global environment (Baker and Ballington 2002, 158). The main driver affecting companies’ differentiation actions was described as early as 1912 by one of the marketing pioneers A. W. Shaw (1912, 710) as meeting human wants more accurate than the competition, and thus increasing customers’ perceived value and satisfaction. Dickson and Ginter (1987, 2) point out in their study based on earlier research by Chamberlin (1965) and Porter (1976) that differentiation can be based on either tangible characteristics of a product such as design or intangible characteristics such as a brand name and country of origin (hereafter referred to as COO). The concept of COO and its impact on consumers’ evaluation of a product as an extrinsic product cue has been one of the most noteworthy topics in international marketing, having been voluminously examined by over 780 authors in more than 750 academic publications in the past 40 years (Papadopoulos and Heslop 2002, 294). Many of these studies accentuate the significant effect the COO has on consumers’ product attribute evaluations. People routinely associate country images with products and services in order to judge and categorize them based on perceived quality and risk levels; thereby COO can influence the likelihood of a purchase (Peterson and Jolibert 1995, 883-884; Verlegh and Steenkamp 1999, 523). Based on the vast research related to COO in the field of international business, it is widely recognized that the country associated with a product can act in a similar way as the name of a brand and even become a part of product’s total image. Thereby depending on customer’s values and perceptions, the product-country image can either increase or decrease perceived value.

Business Intelligencen hyödyntäminen autoalan liiketoiminnassa

Tämän pro gradu -tutkielman tavoitteena on selvittää, miten Business Intelligencea voidaan hyödyntää autoalan liiketoiminnassa Suomessa. Työssä tutkitaan erityisesti autoalan tietotarpeita, tietolähteitä, tiedon analysointia sekä tiedon hyödynnettävyyttä liiketoiminnan ohjaamisessa ja päätöksenteossa. Työn tutkimusstrategiana käytettiin tapaustutkimusta, jonka kohderyhmänä oli viisi suomalaista autoalan suuryritystä. Tutkimuksen empiirinen aineisto hankittiin haastattelemalla yritysten Business Intelligence -toiminnoista vastaavia henkilöitä. Tutkimuksen tulosten perusteella Business Intelligence merkitsi yrityksille ensisijaisesti toiminnanohjausta ja sen seurantaa, sekä korkealaatuisen tiedon tuottamista päätöksentekoa varten. Keskeisiksi tietotarpeiksi luokiteltiin asiakkaisiin, ajoneuvoihin, sisäisiin prosesseihin, liiketoimintatapahtumiin, kilpailijoihin, toimialaan ja asiakastyytyväisyyteen liittyvät tiedot. Tutkimuksen tulosten perusteella tiedon hankinnassa tulee huomioida sekä sisäisen liiketoimintatiedon analyyttinen hyödyntäminen että systemaattinen tiedon hankinta myös ulkoisista lähteistä. Yritykset kokivat Business Intelligence -toimintojen parantaneen tiedon laatua, tehostaneen toiminnanohjausta sekä mahdollistaneen yhteneväisen liiketoiminnan johtamisen organisaation eri tasoilla.

Palveluliiketoimintamallin kehittäminen teolliselle laitetoimittajalle

Tässä tutkimuksessa käsitellään teollisuuden palveluliiketoimintaa. Yritykset ovat perinteisesti saavuttaneet kilpailuetua markkinoilla tuottamalla teknisesti innovatiivisia koneita ja laitteita, mutta viime vuosien aikana yritykset ovat havainneet tarpeen myös palveluliiketoiminnan kehitykselle. Kohdeyrityksenä on teollisuudelle korkealuokkaisia mittalaitteita kehittävä ja valmistava yritys. Tutkimuksen tarkoituksena oli kehittää uusi innovatiivinen vuokraukseen perustuva palveluliiketoimintamalli perinteisen hankinnan sijaan. Olennaisena osana uuteen palveluliiketoimintamalliin liittyi myös tuotteen elinkaarikustannusten selvittäminen ja laskeminen. Toisena tutkimuksen kohteena oli selvittää semi-kvalitatiivisen kyselytutkimuksen avulla, miten yrityksen asiakkaat ja henkilökunta näkevät palveluiden tuottamisen nykytilan ja mitä haasteita palveluliiketoimintaan siirtyminen aiheuttaa organisaatiolle. Työn teoriaosuudessa käsiteltiin palveluliiketoimintaa eri näkökulmista, palvelun laadun muodostumista sekä uuden liiketoimintamallin kehittämistä Osterwalderin Canvas mallin avulla. Lisäksi käsiteltiin elin-kaarilaskennan soveltamista palveluliiketoiminnassa sekä eri investointimalleja teollisiin palveluihin. Kyselytutkimuksen tulosten perusteella asiakkaiden ja yrityksen henkilökunnan näkemykset erosivat palvelun laadun ja prosessien nykytilasta. Asiakkaat arvostivat palvelut paremmalle tasolle kuin henkilökunta. Tulosten perusteella yrityksen olisi kohdennettava resursseja sisäisten prosessien parantamiseen ja kehitettävä organisaatiota enemmän palveluorientoituneeksi. Tuotteen elinkaarikustannukset onnistuttiin selvittämään hyvin ja niiden avulla pystyttiin luomaan sekä yritykselle kannattava että asiakkaille houkutteleva palveluliiketoimintamalli, jonka avulla yrityksen on mahdollista palvella asiakkaitaan entistä paremmin.

Integration in project business : mechanisms for integrating customers and the project network during the life-cycle of industrial projects

This thesis focuses on integration in project business, i.e. how projectbased companies organize their product and process structures when they deliver industrial solutions to their customers. The customers that invest in these solutions run their businesses in different geographical, political and economical environments, which should be acknowledged by the supplier when providing solutions comprising of larger and more complex scopes than previously supplied to these customers. This means that the suppliers are increasing their supply range by taking over some of the activities in the value chain that have traditionally been handled by the customer. In order to be able to provide the functioning solutions, including more engineering hours, technical equipment and a wider project network, a change is needed in the mindset in order to be able to carry out and take the required responsibility that these new approaches bring. For the supplier it is important to be able to integrate technical products, systems and services, but the supplier also needs to have the capabilities to integrate the cross-functional organizations and departments in the project network, the knowledge and information between and within these organizations and departments, along with inputs from the customer into the product and process structures during the lifecycle of the project under development. Hence, the main objective of this thesis is to explore the challenges of integration that industrial projects meet, and based on that, to suggest a concept of how to manage integration in project business by making use of integration mechanisms. Integration is considered the essential process for accomplishing an industrial project, whereas the accomplishment of the industrial project is considered to be the result of the integration. The thesis consists of an extended summary and four papers, that are based on three studies in which integration mechanisms for value creation in industrial project networks and the management of integration in project business have been explored. The research is based on an inductive approach where in particular the design, commissioning and operations functions of industrial projects have been studied, addressing entire project life-cycles. The studies have been conducted in the shipbuilding and power generation industries where the scopes of supply consist of stand-alone equipment, equipment and engineering, and turnkey solutions. These industrial solutions include demanding efforts in engineering and organization. Addressing the calls for more studies on the evolving value chains of integrated solutions, mechanisms for inter- and intra-organizational integration and subsequent value creation in project networks have been explored. The research results in thirteen integration mechanisms and a typology for integration is proposed. Managing integration consists of integrating the project network (the supplier and the sub-suppliers) and the customer (the customer’s business purpose, operations environment and the end-user) into the project by making use of integration mechanisms. The findings bring new insight into research on industrial project business by proposing integration of technology and engineering related elements with elements related to customer oriented business performance in contemporary project environments. Thirteen mechanisms for combining products and the processes needed to deliver projects are described and categorized according to the impact that they have on the management of knowledge and information. These mechanisms directly relate to the performance of the supplier, and consequently to the functioning of the solution that the project provides. This thesis offers ways to promote integration of knowledge and information during the lifecycle of industrial projects, enhancing the development towards innovative solutions in project business.

Email marketing in business-to-business relationship

The objective of this study is to find out how email marketing is conducted towards existing customers in Company X. The first chapter of the study focuses on theoretical literature on direct marketing, especially on solicited and unsolicited email marketing, and on relationship marketing. The following relationship marketing areas: database marketing, customer retention, trust and commitment, loyalty, engagement and satisfaction are described and the possibilities to use email marketing within these entities of relationship marketing. The empirical second part of the study revealed that email marketing tactics to be used on relationship marketing in Company X are little used and there is potential for significant improvements in relationship marketing especially with marketing automation tools.

Information integration and its impacts on logistics performance - Using information technology and systems to facilitate information integration

Fast changing environment sets pressure on firms to share large amount of information with their customers and suppliers. The terms information integration and information sharing are essential for facilitating a smooth flow of information throughout the supply chain, and the terms are used interchangeably in research literature. By integrating and sharing information, firms want to improve their logistics performance. Firms share information with their suppliers and customers by using traditional communication methods (telephone, fax, Email, written and face-to-face contacts) and by using advanced or modern communication methods such as electronic data interchange (EDI), enterprise resource planning (ERP), web-based procurement systems, electronic trading systems and web portals. Adopting new ways of using IT is one important resource for staying competitive on the rapidly changing market (Saeed et al. 2005, 387), and an information system that provides people the information they need for performing their work, will support company performance (Boddy et al. 2005, 26). The purpose of this research has been to test and understand the relationship between information integration with key suppliers and/or customers and a firm’s logistics performance, especially when information technology (IT) and information systems (IS) are used for integrating information. Quantitative and qualitative research methods have been used to perform the research. Special attention has been paid to the scope, level and direction of information integration (Van Donk & van der Vaart 2005a). In addition, the four elements of integration (Jahre & Fabbe-Costes 2008) are closely tied to the frame of reference. The elements are integration of flows, integration of processes and activities, integration of information technologies and systems and integration of actors. The study found that information integration has a low positive relationship to operational performance and a medium positive relationship to strategic performance. The potential performance improvements found in this study vary from efficiency, delivery and quality improvements (operational) to profit, profitability or customer satisfaction improvements (strategic). The results indicate that although information integration has an impact on a firm’s logistics performance, all performance improvements have not been achieved. This study also found that the use of IT and IS have a mediocre positive relationship to information integration. Almost all case companies agreed on that the use of IT and IS could facilitate information integration and improve their logistics performance. The case companies felt that an implementation of a web portal or a data bank would benefit them - enhance their performance and increase information integration.

Interaction with industrial customers from a project selling company's perspective

This thesis studied the issue of interaction in industrial buyer-seller relationships. The aim of the thesis was to study the interaction from the seller’s perspective, especially from a project selling company’s perspective. The purpose of the thesis was to offer suggestions for the case company on how to improve interaction. The theoretical part of the study introduced the interaction framework of buyer-seller interaction, and the concept of interaction mechanisms. The focus was on studying the seller’s ways and means to utilize the interaction mechanisms. A case study research was conducted in the empirical part of the study, in which interaction in the case company was observed at a general level and through three different projects. The case company of the study was a project selling company. The case study data was gathered through individual interviews. Content Analysis was used as a research method for analyzing the case study data. Based on the case study findings, the results were drawn. The results indicated what should be done, in order to develop interaction in the case company. Finally, suggestions were provided for the case company on how to improve interaction, and a suggested interaction model was established for the case company. Although the thesis studied the topic from the viewpoint of only one specific company, it also offers outlook for other seller companies to improve their interaction.

The Impact of Service Quality and Relationship Quality on Customer Loyalty in Business-to-Business Context

The main objective of this Master’s Thesis was to examine the interrelations of service quality and relationship quality (customer satisfaction, trust and commitment), and find out are they antecedents for customer loyalty in business-to-business context. Literature review revealed some research gaps concerning these focal concepts, which should be studied more closely. The theoretical basis for this research was collected for evaluating a strategic increase of customer’s perceptions of service quality and relationship quality as well as customer loyalty in business-to-business environment, and it was tested empirically in a sample of 164 corporate customers, who responded to the Internet-based survey. The measures, used in the survey, were first assessed by using confirmatory factor analysis (CFA), and then the hypothesized relationships were further verified using structural equation modeling (SEM) in LISREL 8.80. There was found support for a half of the hypothesized construct relations. The results of the research confirm the direct influence of trust and commitment on customer loyalty. Also, service quality turned out to have an indirect impact on customer loyalty through trust. No support, however, was offered for the proposed impact of customer satisfaction on loyalty in this case. The research provides managerially relevant and actionable results that may help service providers execute more specific customer relationship quality strategies that lead to higher customer loyalty.

Continued Compliance and Degree of Satisfaction in Nulligravida and Parous Women with Intrauterine Contraceptive Devices

Purpose To evaluate the compliance and degree of satisfaction of nulligravida (has not given birth) and parous (had already given birth) women who are using intrauterine devices (IUDs). Methods A cross-sectional cohort study was conducted comparing nulligravida and parous women who had had an IUD inserted between July 2009 and November 2011. A total of 84 nulligravida women and 73 parous women were included. Interviews were conducted with women who agreed to participate through telephone contact. Statistical analysis was performed with Student s t-test and Mann-Whitney test for numeric variables; Pearson s chi-square test to test associations; and, whenever pertinent, Fisher s exact test for categorical variables. A survival curve was constructed to estimate the likelihood of each woman continuing the use of the IUD. A significance level of 5% was established. Results When compared with parous women, nulligravida women had a higher education level (median: 12 vs. 10 years). No statistically significant differences were found between the nulligravida and parous women with respect to information on the use of the IUD, prior use of other contraceptive methods, the reason for having chosen the IUD as the current contraceptive method, reasons for discontinuing the use and adverse effects, compliance, and degree of satisfaction. The two groups did not show any difference in terms of continued use of the IUD (p = 0.4). Conclusion There was no difference in compliance or the degree of satisfaction or continued use of IUDs between nulligravida and parous women, suggesting that IUD use may be recommended for women who have never been pregnant.