Arvoperusteinen hinnoittelu työvälineteollisuudessa - mahdollisuudet ja haasteet

Tutkimuksessa selvitetään miten työvälineiden valmistajat käyttävät arvo-perusteista hinnoittelua teknologiaosaamisen palvelutuotteissa ja mikä vaikuttaa siihen, että sitä käytetään tai ei käytetä. Kirjallisuuskatsauksessa perehdytään markkinoinnin ja laskentatoimen kirjallisuuteen palveluliiketoiminnan, asiakasarvon ja arvoperusteisen hinnoittelun osalta. Palveluliiketoimintaa avataan nimenomaan teollisuuden palveluliiketoiminnan näkökulmasta. Asiakasarvoa puolestaan käsitellään näkökulmina missä asiakasarvo muodostuu ja ketkä sitä luovat. Arvoperusteista hinnoittelua tarkastellaan lähtökohtana sen erityispiirteet asiakkaan ja myynnin suhteen sekä esitetään arvoperusteisen hinnoittelumallin käytön esteitä ja hyötyjä. Empiirisessä osiossa tutkitaan miten Työvälineiden valmistajien toimiala-ryhmän jäsenet käyttävät omissa palvelutuotteissaan arvoperusteista hin-noittelua. Aineisto kerättiin web-kyselyn avulla. Tutkimuksessa nousi esiin, että kyseistä hinnoittelumallia on alettu käyttää joissakin palveluissa. Koetut hyödyt ja esteet osoittautuvat olevan paljolti samat kuin aikaisemmassa tutkimuskirjallisuudessa on havaittu. Suurimpina hyötyinä nähtiin pysyvämmät asiakassuhteet, suurempi voittomarginaali ja positiivinen pakko perehtyä asiakkaan ansaintalogiikkaan. Suurimpina esteinä koettiin palvelusta syntyvän arvon määrittämisen vaikeus ja sen viestiminen asiakkaalle sekä asiakkaan haluttomuus sitoutua pitkiin sopimuksiin.

Sosiaali- ja terveydenhuollon asiantuntijoiden palveluprosessien mallintaminen osana vastaanottotoiminnan kehittämistä

Diplomityön tavoitteena on soveltaa perinteisesti teollisesta tuotannosta lähtöisin olevia prosessijohtamisen menetelmiä sosiaali- ja terveydenhuollon vastaanottotoiminnan kehittämiseen. Tarkoituksena on asiantuntijapalveluprosessien mallintamisen avulla kartoittaa prosessien nykytilaa tunnistamalla ongelma- ja kehittämiskohteita, joiden ratkaisemiseksi annettavien kehittämistoimenpide-ehdotusten muodostamisessa sovelletaan prosessijohtamisen menetelmien periaatteita. Tutkimuksen teoreettisen viitekehyksen mukaisesti tarkastellaan mm. prosessien mallintamista, eli kuvaamista ja analysointia, sekä sosiaali- ja terveydenhuoltoa palvelutuotantona. Tutkimuksessa hyödynnetään sekä kvalitatiivisia että kvantitatiivisia menetelmiä, ja tutkimusaineistoa kerätään haastattelujen, havainnoinnin ja tilastojen avulla. Asiantuntijoiden palveluprosesseista laaditaan aineiston perusteella kuvaukset, ja tunnistetaan prosesseihin tai laajemminkin sosiaali- ja terveydenhuolto-organisaatioon liittyviä ongelma- ja kehittämiskohteita. Kehittämistoimenpiteissä korostuvat asiakaslähtöisyys ja tuottavuus, ja niissä huomioidaan niin asiakkaan, henkilöstön, prosessien kuin asiakasohjauksen näkökulma. Työn keskeisimmät tulokset ovat prosessikuvaukset, tunnistetut ongelma- ja kehittämiskohteet sekä prosessien uudelleenmäärittämiseksi muodostetut kehittämistoimenpide-ehdotukset, joiden hyötyjä ja vaikutuksia mm. suorituskykyyn arvioidaan. Tulosten perusteella voidaan päätellä, että prosessijohtamisen menetelmät soveltuvat sosiaali- ja terveydenhuollon toiminnan kehittämiseen, kunhan huomioidaan toimintaympäristön erityispiirteet ja haasteet.

Characterisation of Laser Beam and Paper Material Interaction

It is known already from 1970´s that laser beam is suitable for processing paper materials. In this thesis, term paper materials mean all wood-fibre based materials, like dried pulp, copy paper, newspaper, cardboard, corrugated board, tissue paper etc. Accordingly, laser processing in this thesis means all laser treatments resulting material removal, like cutting, partial cutting, marking, creasing, perforation etc. that can be used to process paper materials. Laser technology provides many advantages for processing of paper materials: non-contact method, freedom of processing geometry, reliable technology for non-stop production etc. Especially packaging industry is very promising area for laser processing applications. However, there are only few industrial laser processing applications worldwide even in beginning of 2010´s. One reason for small-scale use of lasers in paper material manufacturing is that there is a shortage of published research and scientific articles. Another problem, restraining the use of laser for processing of paper materials, is colouration of paper material i.e. the yellowish and/or greyish colour of cut edge appearing during cutting or after cutting. These are the main reasons for selecting the topic of this thesis to concern characterization of interaction of laser beam and paper materials. This study was carried out in Laboratory of Laser Processing at Lappeenranta University of Technology (Finland). Laser equipment used in this study was TRUMPF TLF 2700 carbon dioxide laser that produces a beam with wavelength of 10.6 μm with power range of 190-2500 W (laser power on work piece). Study of laser beam and paper material interaction was carried out by treating dried kraft pulp (grammage of 67 g m-2) with different laser power levels, focal plane postion settings and interaction times. Interaction between laser beam and dried kraft pulp was detected with different monitoring devices, i.e. spectrometer, pyrometer and active illumination imaging system. This way it was possible to create an input and output parameter diagram and to study the effects of input and output parameters in this thesis. When interaction phenomena are understood also process development can be carried out and even new innovations developed. Fulfilling the lack of information on interaction phenomena can assist in the way of lasers for wider use of technology in paper making and converting industry. It was concluded in this thesis that interaction of laser beam and paper material has two mechanisms that are dependent on focal plane position range. Assumed interaction mechanism B appears in range of average focal plane position of 3.4 mm and 2.4 mm and assumed interaction mechanism A in range of average focal plane position of 0.4 mm and -0.6 mm both in used experimental set up. Focal plane position 1.4 mm represents midzone of these two mechanisms. Holes during laser beam and paper material interaction are formed gradually: first small hole is formed to interaction area in the centre of laser beam cross-section and after that, as function of interaction time, hole expands, until interaction between laser beam and dried kraft pulp is ended. By the image analysis it can be seen that in beginning of laser beam and dried kraft pulp material interaction small holes off very good quality are formed. It is obvious that black colour and heat affected zone appear as function of interaction time. This reveals that there still are different interaction phases within interaction mechanisms A and B. These interaction phases appear as function of time and also as function of peak intensity of laser beam. Limit peak intensity is the value that divides interaction mechanism A and B from one-phase interaction into dual-phase interaction. So all peak intensity values under limit peak intensity belong to MAOM (interaction mechanism A one-phase mode) or to MBOM (interaction mechanism B onephase mode) and values over that belong to MADM (interaction mechanism A dual-phase mode) or to MBDM (interaction mechanism B dual-phase mode). Decomposition process of cellulose is evolution of hydrocarbons when temperature is between 380- 500°C. This means that long cellulose molecule is split into smaller volatile hydrocarbons in this temperature range. As temperature increases, decomposition process of cellulose molecule changes. In range of 700-900°C, cellulose molecule is mainly decomposed into H2 gas; this is why this range is called evolution of hydrogen. Interaction in this range starts (as in range of MAOM and MBOM), when a small good quality hole is formed. This is due to “direct evaporation” of pulp via decomposition process of evolution of hydrogen. And this can be seen can be seen in spectrometer as high intensity peak of yellow light (in range of 588-589 nm) which refers to temperature of ~1750ºC. Pyrometer does not detect this high intensity peak since it is not able to detect physical phase change from solid kraft pulp to gaseous compounds. As interaction time between laser beam and dried kraft pulp continues, hypothesis is that three auto ignition processes occurs. Auto ignition of substance is the lowest temperature in which it will spontaneously ignite in a normal atmosphere without an external source of ignition, such as a flame or spark. Three auto ignition processes appears in range of MADM and MBDM, namely: 1. temperature of auto ignition of hydrogen atom (H2) is 500ºC, 2. temperature of auto ignition of carbon monoxide molecule (CO) is 609ºC and 3. temperature of auto ignition of carbon atom (C) is 700ºC. These three auto ignition processes leads to formation of plasma plume which has strong emission of radiation in range of visible light. Formation of this plasma plume can be seen as increase of intensity in wavelength range of ~475-652 nm. Pyrometer shows maximum temperature just after this ignition. This plasma plume is assumed to scatter laser beam so that it interacts with larger area of dried kraft pulp than what is actual area of beam cross-section. This assumed scattering reduces also peak intensity. So result shows that assumably scattered light with low peak intensity is interacting with large area of hole edges and due to low peak intensity this interaction happens in low temperature. So interaction between laser beam and dried kraft pulp turns from evolution of hydrogen to evolution of hydrocarbons. This leads to black colour of hole edges.

Exchange rate volatility and the use of foreign currency derivatives: Impact of 2008 global financial crisis

This thesis examines the impact of foreign exchange rate volatility to the extent of use of foreign currency derivatives. Especially the focus is on the impacts of 2008 global financial crisis. The crisis increased risk level in the capital markets greatly. The change in the currency derivatives use is analyzed by comparing means between different periods and in addition, by linear regression that enables to analyze the explanatory power of the model. The research data consists of financial statements figures from fiscal years 2006-2011 published by firms operating in traditional Finnish industrial sectors. Volatilities of the chosen three currency pairs is calculated from the daily fixing rates of ECB. Based on the volatility the sample period is divided into three sub-periods. The results suggest that increased FX market volatility did not increase the use foreign currency derivatives. Furthermore, the increased foreign exchange rate volatility did not increase the power of linear regression model to estimate the use foreign currency derivatives compared to previous studies.

Diversification benefits for a Finnish non-industrial private forest investor: Real Estate Investment Trusts in the USA

This thesis examined both domestic and international forest investment options for a Finnish non-industrial private forest investor. The focus was on forest-based investment instruments. The influence of movements of currency exchange rates on foreign returns were also taken into account. Annual data from 1995 to 2011 was used. The main portfolio optimization model in this study was the Mean-Variance model but the results were also validated by using the Value at Risk and Expected Shortfall models. In addition, the exchange rate risk hedging was established by using one-week-maturity forward contracts. The results suggested that 75 % of the total wealth should be invested in Finnish private forests and the rest, 25 %, to a US REIT, in this case Rayonier. With hedging, the total return on the portfolio was 7.21 % (NIPF 5.3%) with the volatility of 6.63 % (NIPF 7.9%). Taxation supported US investments in this case. As a conclusion, a Finnish private forest investor may, as evidenced, benefit in diversifying a portfolio using REITs in the US.

Customer Segmentation in Industrial Markets - CASE: Labelstock Company

The aim of this thesis is to study segmentation in industrial markets and develop a segmenting method proposal and criteria case study for a labelstock manufacturing company. An industrial company is facing many different customers with varying needs. Market segmentation is a process for dividing a market into smaller groups in which customers have the same or similar needs. Segmentation gives tools to the marketer to better match the product or service more closely to the needs of the target market. In this thesis a segmentation tool proposal and segmenting criteria is case studied for labelstock company’s Europe, Middle East and Africa business area customers and market. In the developed matrix tool different customers are planned to be evaluated based on customer characteristic variables. The criteria for the evaluating matrix are based on the customer’s buying organizations characteristics and buying behaviour. There are altogether 13 variables in the evaluating matrix. As an example of variables there are loyalty, size of the customer, estimated growth of the customer purchases and customer’s decision-making and buying behaviour. These characteristic variables will help to identify market segments to target and the customers belonging to those segments.

Developing Service-based Solutions for Water Treatment in Finnish Mining Industry

The aim of this master’s thesis is to analyze the mining industry customers' current and future needs for the water treatment services and discover new business development opportunities in the context of mine water treatment. In addition, the study focuses on specifying service offerings needed and evaluate suitable revenue generation models for them. The main research question of the study is: What kind of service needs related to water treatment can be identified in the Finnish mining industry? The literature examined in the study focused on industrial service classification and new service development process as well as the revenue generation of services. A qualitative research approach employing a case study method was chosen for the study. The present study uses customer and expert interviews as primary data source, complemented by archival data. The primary data was gathered by organizing total of 13 interviews, and the interviews were analyzed by using qualitative content analysis. The abductive-logic was chosen as the way of conducting scientific reasoning in this study. As a result, new service proposals were developed for Finnish mine industry suppliers. The main areas of development were on asset efficiency services and process support services. The service needs were strongly associated with suppliers’ know-how of water treatment process optimization, cost-effectiveness as well as on alternative technologies. The study provides an insight for managers that wish to pursue a water treatment services as a part of their business offering.

Profiling the Value of Industrial Maintenance Services

Industrial maintenance can be executed internally, acquired from the original equipment manufacturer or outsourced to a service provider, and this concludes in many different kind of business relationships. To maximize the total value in a maintenance business relationship it is important to know what the partner values. The value of maintenance services can be considered to consist of value elements and the perceived total value for the customer and the service provider is the sum of these value elements. The specific objectives of this thesis are to identify the most important value elements for the maintenance service customer and provider and also to recognize where the value elements differ. The study was executed as a statistical analysis using the survey method. The data has been collected by an online survey sent to 345 maintenance service professionals in Finland. In the survey, four different types of value elements were considered: the customer’s high critical and low critical items and the service provider’s core and support service. The most valued elements by the respondents were reliability, safety at work, environmental safety, and operator knowledge. The least valued elements were asset management factors and access to markets. Statistically significant differences in value elements between service types were also found. As a managerial implication a value gap profile is presented. This Master’s Thesis is part of the MaiSeMa (Industrial Maintenance Services in a Renewing Business Network: Identify, Model and Manage Value) research project where network decision models are created to identify, model and manage the value of maintenance services.

Huoltoasentajien kannustava palkkiojärjestelmä: case Konecranes Service Oy

Tämän tutkimuksen tavoitteena oli laatia Konecranes Service Oy:n huoltohenkilökunnalle kannustava palkkiojärjestelmä nykyisen kannustinjärjestelmän rinnalle. Diplomityö toteutettiin huhti- syyskuussa 2012 Konecranes Service Oy:ssä projektina, jonka työryhmän jäsenenä tutkija toimi. Tutkimusaineistoa kerättiin haastattelemalla yrityksen henkilökuntaa mahdollisimman laajasti sekä etsimällä käytössä olevia kannustinjärjestelmiä muista vastaavista yrityksistä. Työn teoreettisessa osiossa tarkasteltiin tulospalkkauksen kokonaisuutta sekä työhön liittyviä sisäisiä ja ulkoisia motivaatiotekijöitä. Teoriaosuudessa käsiteltiin lisäksi palkitsemisen kokonaisuutta sekä määriteltiin palkitsemiskohteen (huoltoasentajan) toimenkuvaa, jolloin mahdolliset, huoltoasentajan vaikutuspiirin alaiset mittarit, saatiin rajattua. Empiirinen osuus keskittyi mittareiden hakemiseen sekä sopivan mittariston kehittämiseen toimivaksi kokonaisuudeksi. Tutkimuksen tuloksena syntyi Konecranes Service Oy:n huoltohenkilökunnalle räätälöity mittaristo, jossa on pyritty ottamaan huomioon yrityksen eri toimipisteiden huoltoasentajien mahdollisuudet mahdollisimman kattavasti. Mittaristo on sovellettavissa eri toimintaympäristöihin, mikä vastaa yrityksen asettamiin tarpeisiin.

Industrial solution business – transition from product to solution offering

The business logic in the manufacturing industry has changed in the 21st century. In the current industrial market, manufacturers are driven to provide more comprehensive offerings that go beyond the traditional product-orientation by providing capacity and availability for their customers. From incidental merchandise, services have become the core of manufacturers’ offerings with long-lasting service agreements over the life-cycles of their products. This change is driven both by the need of providers to grow and gain competitive advantage and by increased customer demand caused by customers’ outsourcing trends. The three key drivers for manufacturers’ service strategies are outsourcing trends, saturation of the installed base, and commoditization in product markets. Thus, manufacturers focus on providing industrial solutions which are delivered through relational processes with customers by using solution-driven business models. In the management of marketing activities, this can be regarded as closer customer relationships, service-dominant business logic, and collaboration in solving customers’ problems. However, there are few studies on comprehensive conceptualizations of a solution offering that include different elements and their roles, especially in the context of capital goods industry. Also the transition process needs further studies in a real life context. This study explores the transition process of an industrial company from product to solution business and, as an aid to managing the solution business, explicates the structure and management of an industrial solution offering. There are two themes, the industrial transition process and industrial solution offering. Regarding the industrial transition process, the aim is to understand the supplier view on the process and its execution and to determine the challenges related to the transition process. The industrial solution offering is discussed by its elements and characteristics, as well as management. Furthermore, a special type of build-own-operate-transfer business model is presented and its suitability in the industrial context analyzed. The study includes findings achieved by qualitative methods and from four case companies. Based on the results, it is tentatively suggested that in the industrial solution business, the transition from product to solution business is not a linear project but an evolving process that varies according to customer needs, which suggests that companies need to possess an ability to develop new business models for different customer needs. The industrial solution offering is dynamic as it evolves in collaboration according to the prevailing and latent customer needs, which suggest restructuring of the organization from a product-centric to a customer-centric one. Furthermore, based on the findings, the concept of industrial solutions is defined as an ongoing relational process to satisfy a customer’s particular business or operational requirements, and the concept of industrial solution offering as an entity comprising the customized goods, services, collaboration, and finance needed to fulfill the industrial solution. Finally, the study offers several managerial implications for industrial managers involved in the transition and management of the solution business and its offering.

Modeling of Liquid-Solid Flow in Industrial Scale

In the present work, liquid-solid flow in industrial scale is modeled using the commercial software of Computational Fluid Dynamics (CFD) ANSYS Fluent 14.5. In literature, there are few studies on liquid-solid flow in industrial scale, but any information about the particular case with modified geometry cannot be found. The aim of this thesis is to describe the strengths and weaknesses of the multiphase models, when a large-scale application is studied within liquid-solid flow, including the boundary-layer characteristics. The results indicate that the selection of the most appropriate multiphase model depends on the flow regime. Thus, careful estimations of the flow regime are recommended to be done before modeling. The computational tool is developed for this purpose during this thesis. The homogeneous multiphase model is valid only for homogeneous suspension, the discrete phase model (DPM) is recommended for homogeneous and heterogeneous suspension where pipe Froude number is greater than 1.0, while the mixture and Eulerian models are able to predict also flow regimes, where pipe Froude number is smaller than 1.0 and particles tend to settle. With increasing material density ratio and decreasing pipe Froude number, the Eulerian model gives the most accurate results, because it does not include simplifications in Navier-Stokes equations like the other models. In addition, the results indicate that the potential location of erosion in the pipe depends on material density ratio. Possible sedimentation of particles can cause erosion and increase pressure drop as well. In the pipe bend, especially secondary flows, perpendicular to the main flow, affect the location of erosion.

Can tourism be sustainable? : service experiences from tourism destinations in Europe

The tourism industry is growing rapidly, and thus there is an urgent need to developing sustainable tourism. The research objective of the thesis is to explore and discuss the concept of sustainability within the tourism industry from a marketing point of view, focusing on the perspective of tourist producers’. The thesis consists of four studies, each of which contains different perspectives to support this overall objective. The first study deals with how a hotel can achieve economic sustainability by creating a high level of customer service delivery using a refined GAP-model. The second study examines how tourist producers at mass tourism destinations work with sustainable tourism as a strategic marketing tool in their tourism product development. The third study addresses economic sustainability at the macro level by estimating the tourism demand for Sweden and Norway in five different countries. In the fourth study, the concept of sustainable mass tourism is developed and analyzed from a conceptual standpoint. Study 1 and study 3 concentrate on economic sustainability from a micro and national perspective. The main contribution of Study 1 is the refined GAP-model, which can be seen as a theoretical contribution to the service marketing research. Study 3 shows that exchange rate trends strongly affect tourists’ choice of destination. Study 2 examines sustainable mass tourism as a strategic marketing tool at the destination level. The conclusions of Study 2 contribute to the findings of Study 4 and consider the tourist producers approach to sustainable tourism. One of the contributions of Study 4 is that the concept of sustainable tourism should be divided into three separate parts; economic sustainability, social sustainability and environmental sustainability.

The many faces of strikes : attitudes towards industrial action by labour, management and human resources

Strikes provide a current, fresh but also a seldom-addressed issue to study from economic sciences perspective. This study provides to filling this research gap by trying to identify attitudes towards strikes that can be found inside organizations. The research problem this study then sets out to answer is: “What kinds of attitudes exist inside organizations towards industrial actions and how attitudes vary between labour, management and human resources?” This study has been planned with a view to test how qualitative attitudinal research, as a method, is suited to studying a phenomenon such as strike. At the heart of this research approach lies an assumption linked to rhetoric social psychology, that attitude is a phenomenon that can be identified in argumentation. For this research 10 semi-structured interviews in 4 organizations were conducted utilizing statements and pictures as stimulants for discussion. The material was transcribed and analysed following the two levels, categorical and interpretive, demanded by the chosen method. Altogether five attitudes were discovered; three of them negative, one indifferent and one positive by nature. The negative attitudes of unfairness, failure and personification towards strikes represented the side of strikes that was perhaps the most anticipated, portraying the contradictions between employees and employer. The attitude of ordinariness, which portrayed indifference, and the positive attitude of change however, were more unanticipated findings. They reflect shared understanding and trust between conflict parties. The utilization of qualitative attitudinal approach to study strikes was deemed successful. The results of this study support prior literature on workplace conflicts for example in regards of the definition of conflict and typologies conflicts. In addition the multifaceted nature of strikes can be perceived as one statement supported by this study. It arises in the nature of the attitudes, the diversity of discussion themes during the interviews as well as in the extent of possible theories to apply.

Networks and partnerships in third party logistics service production

Third party logistics, and third party logistics providers and the services they offer have grown substantially in the last twenty years. Even though there has been extensive research on third party logistics providers, and regular industry reviews within the logistics industry, a closer research in the area of partner selection and network models in the third party logistics industry is missing. The perspective taken in this study was of expanding the network research into logistics service providers as the focal firm in the network. The purpose of the study is to analyze partnerships and networks in the third party logistics industry in order to define how networks are utilized in third party logistics markets, what have been the reasons for the partnerships, and whether there are benefits for the third party logistics provider that can be achieved through building networks and partnerships. The theoretical framework of this study was formed based on common theories in studying networks and partnerships in accordance with models of horizontal and vertical partnerships. The theories applied to the framework and context of this study included the strategic network view and the resource-based view. Applying these two network theories to the position and networks of third party logistics providers in an industrial supply chain, a theoretical model for analyzing the horizontal and vertical partnerships where the TPL provider is in focus was structured. The empirical analysis of TPL partnerships consisted of a qualitative document analysis of 33 partnership examples involving companies present in the Finnish TPL markets. For the research, existing documents providing secondary data on types of partnerships, reasons for the partnerships, and outcomes of the partnerships were searched from available online sources. Findings of the study revealed that third party logistics providers are evident in horizontal and vertical interactions varying in geographical coverage and the depth and nature of the relationship. Partnership decisions were found to be made on resource based reasons, as well as from strategic aspects. The discovered results of the partnerships in this study included cost reduction and effectiveness in the partnerships for improving existing services. In addition in partnerships created for innovative service extension, differentiation, and creation of additional value were discovered to have emerged as results of the cooperation. It can be concluded that benefits and competitive advantage can be created through building partnerships in order to expand service offering and seeking synergies.

Hacking User Experience in a Repository Service: ScholarSphere as a Case Study

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014