Cost estimation framework for modular product

Cost estimation is an important, but challenging process when designing a new product or a feature of it, verifying the product prices given by suppliers or planning a cost saving actions of existing products. It is even more challenging when the product is highly modular, not a bulk product. In general, cost estimation techniques can be divided into two main groups - qualitative and quantitative techniques - which can further be classified into more detailed methods. Generally, qualitative techniques are preferable when comparing alternatives and quantitative techniques when cost relationships can be found. The main objective of this thesis was to develop a method on how to estimate costs of internally manufactured and commercial elevator landing doors. Because of the challenging product structure, the proposed cost estimation framework is developed under three different levels based on past cost information available. The framework consists of features from both qualitative and quantitative cost estimation techniques. The starting point for the whole cost estimation process is an unambiguous, hierarchical product structure so that the product can be classified into controllable parts and is then easier to handle. Those controllable parts can then be compared to existing past cost knowledge of similar parts and create as accurate cost estimates as possible by that way.

Tuotteen elinkaarenaikainen tiedonhallinta palvelukeskeisen arkkitehtuurin avulla

Palvelukeskeistä arkkitehtuuria (SOA) sovelletaan nykyään varsinkin suurten yritysten tietojärjestelmien suunnittelussa ja toteutuksessa. Siinä toiminnot suunnitellaan palveluina, mikä lisää erityisesti palveluiden uudelleen-käytettävyyttä ja mahdollisuutta hyödyntää jo tehtyjä järjestelmäinvestointeja. Tuotteen elinkaarenaikaisen tiedonhallinnan (PLM) pyrkimyksenä on saada elinkaarelle hajaantunut tieto käyttöön oikeassa paikassa oikeaan aikaan sekä parantaa tuotetiedon luotettavuutta ja ajantasaisuutta. Tämä on yksi tärkeimmistä tekijöistä tavoiteltaessa kilpailuetuja verkottuneessa liiketoiminnassa. Tämän diplomityön tavoitteena oli selvittää, kuinka tuotteen elinkaarenaikainen tiedonhallinta voidaan toteuttaa palvelukeskeisen arkkitehtuurin avulla sekä, mitä haasteita ja hyötyjä tästä seuraa organisaatiolle. Tutkimus tehtiin kirjallisuustutkimuksena. Työ tarjoaa tietoa PLM:n ja SOA:n integroinnista sekä integroinnin haasteista ja hyödyistä. Tutkimuksen tulokset osoittavat palvelukeskeisen PLM:n tuovan oikein suunniteltuna ja toteutettuna merkittäviä hyötyjä verkostoituneessa ympäristössä toimiville yrityksille. Lisäksi työ antaa käsityksen siitä, kuinka laaja projekti palvelukeskeisen PLM:n implementointi on.

Internet-palvelun tuotekehitys musiikkialalla

Tutkielman tarkoituksena on selvittää, kuinka internet-palvelu kehitetään. Palveluiden kehitysprosessia tutkitaan erityisesti palveluiden kehityksen prosessisyklimallin mukaan ja empiirisessä osiossa sovelletaan teoriaosiossa käytyjä asioita musiikkialan yritykseen. Tutkielman pääongelma on, kuinka musiikkialan internet-palvelu kehitetään. Työn analysointimenetelmä on kvalitatiivinen ja aineisto kerätään sähköpostitse teemahaastatteluina. Palveluiden prosessisykli soveltuu hyvin internet-palveluiden kehityksen kuvaamiseen internetin nopeatempoisen muutostahdin takia. Prosessisyklin vaiheisiin kuuluu suunnittelu-, analyysi-, kehitys- ja lanseerausvaiheet. Internetissä kuluttajien ottaminen mukaan kehitysprosessiin on oleellista. Yritysten tulee myös huomioida, että lanseerausprosessiin tulee varata riittävästi resursseja. Jatkossa tutkimuksissa kannattaa keskittyä erityisesti internetin tuomiin erityispiirteisiin palveluiden kehityksen kannalta.

Tuotteen käytönaikaisen asiakastarvetiedon hyödyntäminen tuotekehitysprojekteissa

Diplomityö on tehty osana Sinfonet-tutkimusprojektia, ja sen tavoitteena on laatia uusi toimintamalli asiakaslähtöisen tuotekehitystoiminnan tehostamiseksi. Toimintamallin vaatimuksena oli asiakastarvetiedon kerääminen koko tuotteen elinkaaren käyttövaiheen ajalta, ja rinnakkainen prosessi asiakastarpeiden analysointiin sekä hyödyntämiseen. Työssä yhdistetään asiakastarpeiden kartoittamiseen, analysointiin ja hyödyntämiseen käytettävät menetelmät yhdeksi systemaattiseksi kokonaisuudeksi, jota Laroxin henkilöstö voi tehokkaasti käyttää työssään. Menetelmä laatittiin teoriaosuudessa havaittujen viitekehysten ja Laroxin avainhenkilöiden kanssa suoritettujen haastattelujen pohjalta. On ehdottoman tärkeätä, että toimintamallin käyttö ja siitä saavutettavat hyödyt saadaan perusteltua yrityksen henkilöstölle. Toimintamallissa asiakastarpeiden kartoitusmenetelmiksi valittiin AVAIN-ryhmähaastattelu sekä puolistrukturoitu haastattelu, ja analysointimenetelmiksi tulkintataulukko sekä QFD (Quality Function Deployment). Tarpeiden dokumentointiin valittiin tietokannaksi Laroxin käytössä jo valmiiksi oleva wiki-pohjainen Live-järjestelmä. Uusi toimintamalli ja siinä mukana olevat prosessit kuvataan diplomityössä yksityiskohtaisesti tietovirtakaaviona.

Toimintaprosessin kehittäminen sairaalaympäristössä teollisuustalouden menetelmin

Työn tavoitteena on tutkia reaaliaikaisen sanelunpurun vaikuttavuutta ja kannattavuutta. Reaaliaikaisen sanelunpurun vaikuttavuuden tarkastelun pohjana käytetään teollisuustalouden puolella tunnettuja ja yrityksissä laajasti käytössä olevia ajatusmalleja, kuten Leania ja Six Sigmaa. Lean –ajattelu perustuu läpimenoajan nopeuttamiseen, hukkaa ja ei lisäarvoa luovien vaiheiden eliminoimisella. Six Sigma keskittyy taas laatuun, jolloin tuote ja palveluvirheitä karsitaan. Lisäksi teoriaosassa käsitellään palveluiden ulkoistamista, tietosuojaa ja palkkakustannusten rakennetta. Empiriaosassa kuvataan kirurgianpoliklinikan ja leikkausosaston prosesseja. Prosesseissa keskitytään nykytilan sekä reaaliaikaisen sanelunpurun vaikutuksiin. Prosessien kuvaamisella saadaan tietoa toiminnan ongelmista ja kehittämiskohteista. Henkilökunnan haastatteluin selvitettiin sanelujonon vaikutuksia sekä kokemuksia ulkoistamisesta. Kustannusanalyysin avulla selvitettiin ulkoistamisen kannattavuutta reaaliaikaisessa sanelunpurussa. Työn tuloksena saatiin vaikuttavuus tarkastelu reaaliaikaisesta sanelunpurusta sekä ulkoistamisen kannattavuudesta. Prosessien kuvaaminen osoittaa, että useissa prosessin eri vaiheissa sanelujen puuttuminen aiheuttaa kustannuksia ja vaikuttaa henkilökunnan työhön. Kustannusanalyysin pohjalta sanelunpurun ulkoistaminen todettiin kannattavaksi. Jatkossa sanelunpurun ulkoistamisessa tulee kiinnittää huomiota siihen, mitkä osat sanelunpurkuprosessista halutaan ulkoistaa. Sähköisten järjestelmien kehittyminen vaikuttaa osaltaan tähän päätökseen. Lisäksi suoritepohjaisen hinnoittelun kehittäminen on tärkeä osa sanelunpurkuprosessin tehokkuutta.

Analysis of companies' software as a service adoption intention factors

The goal of this study is to develop managerial recommendations for international vendors and system integrators, which offer Software as a Service for enterprise information systems on the Russian market. Those recommendations can be used to develop marketing, sales, new product and service level agreement strategies. For those reasons factors affecting SaaS adoption were determined and their influence on intention to adoption was examined.

Teollisten palveluiden kehittäminen asiakaslähtöisesti

Teollisuuden palvelut tuottavat tulevaisuudessa yhä suuremman osan yritysten liikevaihdosta ja tämän vuoksi niiden systemaattinen kehittäminen yrityksessä on erityisen tärkeää. Tutkimuksen tavoitteena on luoda teorian pohjalta malli, jonka avulla mekatroniikkaklusterin yritykset voivat analysoida tarjottavia palveluitaan asiakkaan näkökulmasta. Tutkimuksessa pyritään myös selvittämään empiirisesti mallin soveltuvuus palvelutarjonnan kehittämiseen tutkimuksessa mukana oleville erikokoisille yrityksille. Tutkimuksen teoreettisessa osassa luodaan katsaus yrityksen kasvustrategioihin. Palveluiden innovaatio- sekä kehitysprosessit käydään lyhyesti läpi, sekä esitetään lähtökohtia, miten yritykset voivat siirtyä tuotetarjoajasta palveluntarjoajaksi. Teoriaosassa käydään läpi QFD -malli, jota voidaan käyttää hyödyksi kun analysoidaan asiakkaan palvelutarpeita ja priorisoidaan yrityksen resursseja. QFD -mallin lisäksi esitellään myös muita laatutyökaluja sekä asiakkaan tarpeiden selvitysmenetelmiä, joita yritys voi käyttää hyödykseen QFD -mallin kanssa. Synteesiosassa esitellään ensin MS Excel -pohjainen QFD -malli. Mallin käyttö-kokeilu toteutetaan työpaja tyylisessä kokouksessa, ja tutkimustulokset kerätään havainnoimalla, teemahaastattelulla sekä kyselyn avulla.

E-PORT. Improving efficiency of Finnish port community by intelligent systems Final report of the Mobile Port project

The management of port-related supply chains is challenging due to the complex and heterogeneous operations of the ports with several actors and processes. That is why the importance of information sharing is emphasised in the ports. However, the information exchange between different port-related actors is often cumbersome and it still involves a lot of manual work and paper. Major ports and port-related actors usually have advanced information systems in daily use but these systems are seldom interoperable with each other, which prevents economies of scale to be reached. Smaller ports and companies might not be equipped with electronic data transmission at all. This is the final report of the Mobile port (MOPO) project, which has sought ways to improve the management and control of port-related sea and inland traffic with the aid of ICT technologies. The project has studied port community systems (PCS) used worldwide, evaluated the suitability of a PCS for the Finnish port operating environment and created a pilot solution of a Finnish PCS in the port of HaminaKotka. Further, the dry port concept and its influences on the transportation system have been explored. The Mobile Port project comprised of several literature reviews, interviews of over 50 port-related logistics and/or ICT professionals, two different kinds of simulation models as well as designing and implementing of the pilot solution of the Finnish PCS. The results of these multiple studies are summarised in this report. Furthermore, recommendations for future actions and the topics for further studies are addressed in the report. The study revealed that the information sharing in a typical Finnish port-related supply chain contains several bottlenecks that cause delays in shipments and waste resources. The study showed that many of these bottlenecks could be solved by building a port community system for the Finnish port community. Almost 30 different kinds of potential services or service entities of a Finnish PCS were found out during the study. The basic requirements, structure, interfaces and operation model of the Finnish PCS were also defined in the study. On the basis of the results of the study, a pilot solution of the Finnish PCS was implemented in the port of HaminaKotka. The pilot solution includes a Portconnect portal for the Finnish port community system (available at https://www.portconnect.fi) and two pilot applications, which are a service for handling the information flows concerning the movements of railway wagons and a service for handling the information flows between Finnish ports and Finland-Russian border. The study also showed that port community systems can be used to improve the environmental aspects of logistics in two different ways: 1) PCSs can bring direct environmental benefits and 2) PCSs can be used as an environmental tool in a port community. On the basis of the study, the development of the Finnish port community system should be continued by surveying other potential applications for the Finnish PCS. It is also important to study if there is need and resources to extend the Finnish PCS to operate in several ports or even on a national level. In the long run, it could be reasonable to clarify whether there would be possibilities to connect the Finnish PCS as a part of Baltic Sea wide, European-wide or even worldwide maritime and port-related network in order to get the best benefit from the system

Developing customer need based services in personal security service industry

The purpose of this thesis is to examine how services can be developed and how the voice of the customer can be incorporated to the strategic planning of services. Furthermore, the objective is to investigate the methods of customer need analysis and service bundling. The data is collected from secondary and primary sources by reviewing the existing academic literature and by conducting in-depth interviews and surveys. The main findings of this research indicate that the service development in personal security service industry should be conducted through a formalized process and the process should begin with setting the strategic objectives. Moreover, the voice of the customer should be incorporated into all stages of the development process, especially into the front-end of the process. Furthermore, the information on customer needs should be gathered in a manner tailored for the purposes of service development.

Education export as a form of knowledge transfer : The potential of Finnish education export in Chile

Knowledge transfer is a complex process. Knowledge transfer in the form of exporting education products from one system of education to another is particularly complicated, because each system has been developed in a particular context to meet the requirements seen as relevant at each time. National innovation systems are often seen to form an essential framework within which the development of a country, its economy and level of knowledge are considered and promoted. These systems are orientated towards the future, and as such they also provide a framework for the knowledge transfer related to the development of education. In the best of circumstances they are able to facilitate and boost this transfer both from the viewpoint of the provider and the recipient. The leading thought and the idea of the study is that education export is a form of knowledge transfer, which is illustrated by the existing models included. The purpose of this study is to explore, analyze and describe the factors and phenomena related to education export, and more specifically, those related to the experiences and potential of Finnish education export to Chile. For better understanding, of the multiplicity of the issue involved, the current status of education export between Finland and Chile and he existing efforts within the Finnish innovation network will be outlined as well as new forms of co-operation between Finland and Chile in educational matters explored. Several countries have started to commercialize their education system in order to establish themselves as emerging education exporters. Moreover, the demand for education reform is accurate in many developing countries. This offers a good match between Finland and Chile to be the example countries of the research. The main research findings suggest that there are several business areas in education export. These include degrees in education, training services and education technologies for example The factors that influence education export can be divided into four groups, including academic, cultural, political and economic aspects. Challenges to overcome include the lack of product or services to be sold, lack of market and cultural knowledge of the buyer country, financing and lack of suitable pricing model. National innovation systems could be seen as enabling entities for successful education export. The extensive networks that national innovation systems aim to form, could operate as a basis for joining the forces in selling knowledge as well as receiving knowledge in a constructive way.

Jalometallikustannusten hallintatyökalu

Tämän työn tavoitteena on luoda malli tai työkalu Ecocat Oy:n jalometallihävikin kustan-nusten hallitsemiseen tuote- tai tuoteperhetasolla. Lisäksi osatavoitteena on nostaa esiin huomioita ja käytäntöjä hävikin hallinnan tueksi. Työn teoriaosuudessa käydään läpi prosesseihin liittyvää kirjallisuutta keskittyen proses-sien kuvaamiseen, määrittelyyn, kehittämiseen sekä vaihtelun vähentämisen perusteisiin. Lisäksi teoriaosassa on lyhyt Lean perusteiden sekä työkalujen kuvaus, jonka tarkoituk-sena on antaa pohjaa hävikin minimointityölle. Viimeinen teoriakappale keskittyy jalo-metalleihin raaka-aineina; niiden hankintaan, markkinoiden piirteisiin ja kustannusvaiku-tuksiin. Työn empiirisen osan johdantona toimii kappaleessa 4 oleva katalysaattorien ja niissä käytettävien jalometallien esittely. Kappaleissa 5 - 7 on työn empiirinen osuus, jossa luodaan tavoitteiden mukainen kustannustenhallintyökalu. Työn tuloksena syntyi viiden tutkimukseen valitun tuotteen avulla Excel-laskentatyökalu, jolla tiettyjen spesifikaatioiden mukaisten tuotteiden jalometallihävikin osuus tuotannon aikana voidaan laskea. Lisäksi työn tuloksissa, osatavoitteen mukaisesti, tarkastellaan muun muassa mittausprosesseihin sekä työn suoritukseen liittyviä kehityskohteita.

Developing Service-based Solutions for Water Treatment in Finnish Mining Industry

The aim of this master’s thesis is to analyze the mining industry customers' current and future needs for the water treatment services and discover new business development opportunities in the context of mine water treatment. In addition, the study focuses on specifying service offerings needed and evaluate suitable revenue generation models for them. The main research question of the study is: What kind of service needs related to water treatment can be identified in the Finnish mining industry? The literature examined in the study focused on industrial service classification and new service development process as well as the revenue generation of services. A qualitative research approach employing a case study method was chosen for the study. The present study uses customer and expert interviews as primary data source, complemented by archival data. The primary data was gathered by organizing total of 13 interviews, and the interviews were analyzed by using qualitative content analysis. The abductive-logic was chosen as the way of conducting scientific reasoning in this study. As a result, new service proposals were developed for Finnish mine industry suppliers. The main areas of development were on asset efficiency services and process support services. The service needs were strongly associated with suppliers’ know-how of water treatment process optimization, cost-effectiveness as well as on alternative technologies. The study provides an insight for managers that wish to pursue a water treatment services as a part of their business offering.

Understanding, Managing And Developing A Well-Being Service Brand

The aim of this study is to analyze and understand a well-being service brand. Brands most definitely are a hot topic of today’s business world. Companies have started to realize the importance of branding, especially when talking about product related industries. Branding of services is a relatively new concept, which has gained less attention within academic literature. Though there is no legal distinction between product and service brands, they both have their own characteristics and qualities. The focus of the study is especially on the current brand images of both internal and external stakeholder groups. Understanding these brand perceptions will help in managing and developing the brand, so that it becomes even stronger, more recognized, and unified. This study is a quantitative, semi hypothetic-deductive single case study. The data for this study was collected throughout an online survey. The respondents represent both internal stakeholders, in direct contact with the service, as well as external stakeholders, who have no previous history with the service brand. The respondents represent a wide age spread, and are also geographically diverse. The study relies on a Finnish context. The study provides numerous managerial takeaways, especially because of its wide scope, on a topic that has never before been studied. All findings strongly reflected existing service brand theory, in addition with making the findings implementable for the case company.

Development of a process for the direct synthesis of hydrogen peroxide in a novel microstructured reactor

Microreactors have proven to be versatile tools for process intensification. Over recent decades, they have increasingly been used for product and process development in chemical industries. Enhanced heat and mass transfer in the reactors due to the extremely high surfacearea- to-volume ratio and interfacial area allow chemical processes to be operated at extreme conditions. Safety is improved by the small holdup volume of the reactors and effective control of pressure and temperature. Hydrogen peroxide is a powerful green oxidant that is used in a wide range of industries. Reduction and auto-oxidation of anthraquinones is currently the main process for hydrogen peroxide production. Direct synthesis is a green alternative and has potential for on-site production. However, there are two limitations: safety concerns because of the explosive gas mixture produced and low selectivity of the process. The aim of this thesis was to develop a process for direct synthesis of hydrogen peroxide utilizing microreactor technology. Experimental and numerical approaches were applied for development of the microreactor. Development of a novel microreactor was commenced by studying the hydrodynamics and mass transfer in prototype microreactor plates. The prototypes were designed and fabricated with the assistance of CFD modeling to optimize the shape and size of the microstructure. Empirical correlations for the mass transfer coefficient were derived. The pressure drop in micro T-mixers was investigated experimentally and numerically. Correlations describing the friction factor for different flow regimes were developed and predicted values were in good agreement with experimental results. Experimental studies were conducted to develop a highly active and selective catalyst with a proper form for the microreactor. Pd catalysts supported on activated carbon cloths were prepared by different treatments during the catalyst preparation. A variety of characterization methods were used for catalyst investigation. The surface chemistry of the support and the oxidation state of the metallic phase in the catalyst play important roles in catalyst activity and selectivity for the direct synthesis. The direct synthesis of hydrogen peroxide was investigated in a bench-scale continuous process using the novel microreactor developed. The microreactor was fabricated based on the hydrodynamic and mass transfer studies and provided a high interfacial area and high mass transfer coefficient. The catalysts were prepared under optimum treatment conditions. The direct synthesis was conducted at various conditions. The thesis represents a step towards a commercially viable direct synthesis. The focus is on the two main challenges: mitigating the safety problem by utilization of microprocess technology and improving the selectivity by catalyst development.

Mobile clinics in public health care: Integrated service offerings for rural elderly

This research is an analysis of the value and content of local service offerings that enable longer periods of living at home for elderly people. Mobile health care and new distribution services have provided an interesting solution in this context. The research aim to shed light on the research question, ‘How do we bundle services based on different customer needs?’ A research process consisting of three main phases was applied for this purpose. During this process, elderly customers were segmented, the importance of services was rated and service offerings were defined. Value creation and service offering provides theoretical framework for the research. The target group is South Karelia’s 60 to 90-year old individuals and the data has been acquired via a postal questionnaire. Research has been conducted as exploratory research utilizing the methods of quantitative and social network analysis. The main results of the report are identified customer segments and service packages that fits to the segments’ needs. The results indicate the needs of customers and the results are additionally analysed from the producer’s point of view. In addition to the empirical results, the used theory framework has been developed further in order for the service-related theories to be seen from the customer’s point of view and not just from the producer’s point of view.