Collaborative Relationships in Supply Chain

Nykyään asiakkaat odottavat lyhyempiä toimitusaikoja, joustavia toimituksia, parempaa laatua ja alhaisempaa hintatasoa. Toimittajan ja ostajan välinen yhteistyösuhde on yksi tärkeimmistä toiminnoista, joka mahdollistaa menestyksekkään liiketoiminnan nopeasti kasvavassa telekommunikaatioympäristössä.Tämä tutkimus käsittelee ydinasioita toimittajien ja ostajien välisen yhteistyön kehittymisen ympärillä. Tämä tarkoittaa hankintojen suunnittelua yhteistyössä toimittajien kanssa, selvittää mitä asioita voidaan ja pitäisi parantaa toimittaja/ostaja-suhteisiin ostotoiminnassa, ja mitä asioita pitää ottaa huomioon suunniteltaessa yhteistyösuhteita toimittajien kanssa. Tämä tutkimus myös lisää yleistä tietämystä strategisesta hankintatoiminnasta ja erilaisista olosuhteista toimittaja/ostaja-suhteissa, jotta menestyksellisiä suhteita toimittajien ja ostajien välillä voidaan saavuttaa, ylläpitää ja perustaa. Empiirinen osa analysoi kuinka tehokkaammat ja integroidummat suhteet saavutetaan hankintaketjussa telekommunikaationyrityksen valittujen toimittajien kanssa. Lisäksi paino-pistealueena on esittää ja selittää kuinka toimittajat ja ostajat käsittävät yhteistyösuhteensa. Empiirisen osan tulokset antavat ostajille parempaa ymmärrystä avaintoimittajiensa tilasta ja työkalut suorittaa menestyksekkäämpää liiketoimintaa yhteistyösuhteiden avulla.

Electronic Commerce - Advantages and Requirements through Supply Chain

Työ käsittelee Metso Paper Servicen varaosa- ja kulutusosatuotelinjojen mahdollisuuksia sähköiseen liiketoimintaan ulkoisten asiakkaiden kanssa sekä sähköisten transaktioiden vaikutuksia, etuja ja edellytyksiä. Työssä selvitetään Metson ja sen kymmenen kotimaisen asiakastehtaan myynti- ja ostoprosessin toiminta. Prosessimallin avulla arvioidaan valmiuksia sähköisiin transaktioihin nykyisessä myynti- ja ostotoiminnassa. Tarkastelu painottuu toimintoihin tarjontaketjun eri vaiheissa. Teknisiä näkökohtia käsitellään kokonaiskuvan luomiseksi. Lisäksi työssä arvioidaan muutoksia, joita sähköinen liiketoiminta aiheuttaisi. Haastatteluin tehdyssä tutkimuksessa kartoitetaan näkemyksiä sähköiseen liiketoimintaan erilaisilla organisaation tasoilla. Kokonaisnäkemys syntyy erilaisista näkökulmista sähköiseen kauppaan. Sähköiseen liiketoimintaan suhtaudutaan myönteisesti. Kokemuksia on kuitenkin vielä vähän. Vaikka hankkeita sähköisen liiketoiminnan lisäämiseksi on vireillä, yhtä tärkeää on parantaa valmiuksia tehostamalla paitsi informaatiovirtaa, myös materiaalivirtaa.

Managing material flows and improving performance in a component supplier’s internal supply chain

Tämä diplomityö tehtiin osana Componenta Cast Componentsin kolmivuotista toimitusketjujen kehitysprojektia. Työn tavoitteena oli kuvata tyypillinen yrityksen sisäinen toimitusketjuprosessi ja tehdä alustava suorituskykyanalyysi valimon ja konepajan väliseen logistiseen prosessiin liittyen. Tarkoituksena oli myös löytää kehityskohteita materiaali- ja tietovirtojen hallinnassa näiden tuotantoyksiköiden välillä. Logistiikkaan, toimitusketjujen hallintaan ja toimitusketjun suorituskyvyn mittaamiseen liittyvän kirjallisuustutkimuksen sekä käytännön perusteella valittiin sopivat analyysimenetelmät. Näitä menetelmiä hyödynnettiin tilaustoimitus – prosessin kuvaamisessa sekä suorituskyvyn analysoinnissa yrityksen sisäisessä toimitusketjussa. Luonnollisena jatkona kehitettiin ja pantiin käytäntöön toimitusketjua synkronoiva imutyyppinen tuotannon- ja materiaalinohjausmenetelmä. Diplomityöprojektin aikana kehitettiin myös apuvälineet käyttöönotetun menetelmän asianmukaista hyödyntämistä varten. Diplomityöprojektissa otettiin ensimmäiset askeleet kohti integroitua sisäistä toimitusketjua. Uuden tuotannon- ja materiaalinohjausmenetelmän standardisointi muihin menetelmiin yhdistettynä, sekä toimitusketjun avainmittarien jatkokehitys on jo alkanut. Läpimenoaikoja lyhentämällä ja synkronoidun, läpinäkyvän kysyntä-tarjontaketjun avulla integroitumisen astetta voidaan nostaa edelleen. Poikkiorganisatorinen kehitys ja johtaminen toimitusketjussa on avainedellytys menestykseen.

Defining supply chain service level priorities in an international polyolefin company

Tutkimuksen tarkoituksena oli selvittää, ovatko asiakkaiden kanssa sovitut kaupintavarastojärjestelyt liiketoiminnallisesti oikeutettuja vai ovatko ne pääasiassa vain asiakkaan palvelua. Tavoitteiksi asetettiin tutkia logististen palveluiden tärkeyttä, etsiä eri näkökohtia asiakaskohtaisten varastojen ja varastopalveluiden tarjoamiselle, löytää mahdollisia korvaavia tai vastaavia palveluita, sekä esitellä menetelmä toimitusketjun palvelutason priorisoimiseksi ja hallitsemiseksi. Työhön tarvittu kaupallinen aineisto koskien tuotteita ja asiakaita saatiin yrityksen tietojärjestelmästä. Muut taustatiedot kerättiin yrityksen toimintaohjeista, keskustelemalla ja haastattelemalla henkilöstöä, sekä seuraamalla yrityksen toimintaa työnteon ohessa. Tutkimus on jaettu kirjallisuus- ja case-osuuteen. Työn case-tulokset osoittavat, että nykyiset kaupintavarastoasiakkaat pääosin ansaitsevat lisäarvoa tuottavan varastopalvelun. Tutkimuksesta saadut kokemukset ja tiedot auttavat tekemään lisäarviointeja, koskien myös yrityksen muita tuotantolaitoksia. Työstä saatuja kokonaishyötyjä on vielä tässä vaiheessa vaikea arvioida.

Contract manufacturing networks structure and supply chain management

The usual objectives that companies have for subcontracting are studied in this thesis. The case company’s objectives for contract manufacturing now and in the future are identified. The main objective of the thesis is to create a focused model for the structure and supply chain management in the contract manufacturing network. This model is made for case company’s certain profit center. The different possibilities and their advantages and disadvantages for the structure and supply chain management are examined trough a theoretical review of literature. The possibilities found are then examined from the case company’s point of view. The case company point of view is established based on the opinions of the case company’s representatives. The outcome of the thesis is that the star shaped structure with supply chain management centralized to case company would be the best choice for the case company to manage the contract manufacture network.

Unitizing in Supply Chain – Case SECU Container

The aim of this thesis is to analyze how increasing the level of unitizing affects to the costs in the transport system of a Finnish paper and board company. The parts of the supply chain where costs are analyzed are limited to domestic inland transport and port operations. Supply Chain management is important aspect of modern day companies’ strategies. Intermodal transport and different transport systems are the key items which are studied in the theory part of this thesis. In the case study the payload simulations for SECU container (Stora Enso Cargo Unit) stuffed in mills sites are base of the cost analyze of this thesis. Thesis also makes a glance for the restrictions and development trends in Finnish railroads. In analyze SECU containers are moved up to the mill site for stuffing. This increases the level of unitizing in supply chain. Analyze is made for three variation of current traffic lines. Analyze shows that when idea of intermodalism is well used there is considerable cost savings to gather in pre-transportation and port operations. But also effects to mill sites and destination ports needs to be take under considering. In analyze the effects of increased axle weight for SECU container transportation in Finnish railroads is studied. When transport unit is stuffed in earliest possible point supply chain and unloaded the last possible point the savings made in chain can be considerable. In case study of this thesis almost 40% savings in total costs could be reached in pre transportation and port operations when unitizing level is increased in supply chain.

Supply chain cost saving potential analysis

Target of this study was to examine the current supply chain with focus on external part and identify the cost potential areas which lie there. The goal was to evaluate the cost save potential and give estimate what would be required in order to realise it. Base data related to study was searched and examined with using company’s enterprise resource planning system. In case feasible two types of scenarios were built in order to describe the scale of save potential. First scenario was theoretical and achieving it would require further investments and second scenario was realistic approach where more limitations were taken into account. The results clearly show that there is high save potential in supply chain costs linked to balance between internal and external operations. Realising of it would require at least minor investments as current internal capacity is not on a level to fully absorb the additional volumes which are needed in order to realise the potential. This study can be used as a basis when starting new projects related to investment needs.

BIOMASS SUPPLY CHAIN ANALYSIS WITH DENSIFIED WASTE

ABSTRACT The possibility to vary the energy matrix, thus reducing the dependency on fossil fuels, has amplified the acceptance of biomass as an alternative fuel. Despite being a cheap and renewable option and the fact that Brazil is a major producer of waste from agriculture and forestry activities, the use of these materials has barriers due to its low density and low energetic efficiency, which can raise the costs of its utilization. Biomass densification has drawn attention due to its advantage in comparison to in natura biomass due to its better physical and combustion characteristics. The objective of this paper is to evaluate the impact of biomass densification in distribution and transport costs. To reach this objective, a mathematical model was used to represent decisions at a supply chain that coordinates the purchase and sale of forestry and wood waste. The model can evaluate the options to deliver biomass through the supply chain combining demand meeting and low cost. Results point to the possibility of an economy of 60% in transport cost and a reduction of 63% in the required quantity of trucks when densified waste is used. However, costs related to the densifying process lead to an increase of total supply costs of at least 37,8% in comparison to in natura waste. Summing up, the viability of biomass briquettes industry requires a cheaper densification process.

Supply chain performance management system

The purpose of the study is to determine general features of the supply chain performance management system, to assess the current state of performance management in the case company mills and to make proposals for improvement – how the future state of performance management system would look like. The study covers four phases which consist of theory and case company parts. Theoretical review gives understanding about performance management and measurement. Current state analysis assesses the current state of performance management in the mills. Results and proposals for improvement are derived from current state analysis and finally the conclusions with answers to research questions are presented. Supply chain performance management system consists of five areas: perfor-mance measurement and metrics, action plans, performance tracking, performance dialogue and rewards, consequences and actions. The result of the study revealed that all mills were quite average level in performance management and there is a room for improvement. Created performance improvement matrix served as a tool in assessing current performance management and could work also as a tool in the future in mapping the current state after transformation process. Limited harmonization was revealed as there were different ways to work and manage performance in the mills. Lots of good ideas existed though actions are needed to make a progress. There is also need to harmonize KPI structure.

Improving the Supply Chain Performance Management System in a Finnish paper mill

This Master’s Thesis studies performance management system and its benefits, risks and costs. Objective of the thesis is to describe and evaluate currently used supply chain performance management system (SCPMS) in a Finnish paper mill and its interfaces with its business unit’s SCPMS. As a result, the host company has improvement road map for improving its SCPMS. Used SCPMS in the host company and its interfaces to business unit’s SCPMS are described based on interviews held in the host company and the business unit. Evaluation of the host company’s SCPMS is based on literature study. For improvement road map, three areas in need of improvements are chosen. The study shows the need of high level top management commitment in successful performance management system implementation and usage, especially when the system is deployed to lower levels in the organization.

Supplier codes of conduct: Acting responsibly in global supply chains

Nowadays the Western companies are considered responsible for the social and environmental issues in their whole supply chains. To influence the practices of their suppliers the Western companies have created suppliers codes of conduct (SCCs) which express their requirements. Suppliers’ compliance with the SCCs is checked through audits. The purpose of this thesis is to analyze SCCs as a means for Western companies to ensure socially and environmentally responsible actions in their global supply chains, and the sub-objectives are to find out 1) how well do the SCCs and their auditing work at suppliers’ production sites and 2) how can possible problems related to SCCs and their auditing be solved. This is a qualitative research carried out in the form of a case study with two case companies. In this study both primary and secondary data is used. The primary data is collected in the form of interviews of the case company representatives and three external experts. Based on a theoretical framework of previous research in the fields of corporate social responsibility and supply chain management, a model with eleven factors, which influence the success of SCC implementation and the auditing of SCC –implementation, is drafted. Also several different best-practices to help to solve and avoid possible problems related to SCC -implementation and auditing have been identified from previous research. Based on the findings of this study the theoretical model has been updated adding two new influential factors. It seems that how well the SCC and its auditing work at suppliers’ production sites depends on the joint effect of thirteen influential factors: buyer’s purchasing policy, supplier’s motivation, buyer’s commitment, the solving of agency problems, the contents of the SCC, supplier’s role and the buyer-supplier –relationship, complexity of supply chain, the limitations of the smaller buyers, cooperation through a business association or multi-stakeholder system, the role of supplier’s employees, SCC –related communication and supplier’s understanding, cheating in audits and the auditors. The possible problems related to SCCs and their auditing can be solved by adopting best-practices. Nine of the theoretical best-practices stand out from the findings of this study: 1) two-way communication and collecting feedback from suppliers, 2) the philosophy of continuous improvement, 3) long-term business relationships with the supplier, 4) informing the supplier about the advantages of SCC –compliance, 5) rewarding code-compliant suppliers, 6) building collaborative, good buyer-supplier relationships, 7) supporting and advising the supplier, 8) joining a business association or multi-stakeholder system and 9) interviewing supplier’s employees as a part of the audits.

Global Spare Parts Supply Chain Analysis

In today’s global industrial service business, markets are dynamic and finding new ways of value creation towards customers has become more and more challenging. Customer orientation is needed because of the demanding after-sales business which is both quickly changing and stochastic in nature. In after-sales business customers require fast and reliable service for their spare part needs. This thesis objective is to clarify this challenging after-sales business environment and find ways to increase customer satisfaction via balanced measurement system which will help to find possible targets to reduce order cycle times in a large metal and mineral company Outotec (Filters)’ Spare Part Supply business line. In case study, internal documents and data and numerical calculations together with qualitative interviews with different persons in key roles of Spare Part Supply organizations are used to analyze the performance of different processes from the spare parts delivery function. The chosen performance measurement tool is Balanced Scorecard which is slightly modified to suit the lead time study from customer’s perspective better. Findings show that many different processes in spare parts supply are facing different kind of challenges in achieving the lead time levels wanted and that these processes’ problems seem to accumulate. Findings also show that putting effort in supply side challenges and information flows visibility should give the best results.

The demand-supply balancing process in supply chain management - case mining & metals industry equipment

The aim of this thesis is to search how to match the demand and supply effectively in industrial and project-oriented business environment. The demand-supply balancing process is searched through three different phases: the demand planning and forecasting, synchronization of demand and supply and measurement of the results. The thesis contains a single case study that has been implemented in a company called Outotec. In the case study the demand is planned and forecasted with qualitative (judgmental) forecasting method. The quantitative forecasting methods are searched further to support the demand forecast and long term planning. The sales and operations planning process is used in the synchronization of the demand and supply. The demand forecast is applied in the management of a supply chain of critical unit of elemental analyzer. Different meters on operational and strategic level are proposed for the measurement of performance.

Risk Management in Sustainable Supply Chain

Growing awareness in corporate responsibility and issues related to sustainability is seen to increase innovativeness in a company as well as in its supply chain. The stakeholders’ awareness on sustainability has increased, and they demand the companies to identify sustainability risks and adapt procedures for mitigating them. The purpose of this thesis is to examine how risks are managed in sustainable supply chain. Definition of sustainability risks and risk management procedures construct the framework of the study. It is done through an empirical study conducted on 95 Finnish companies operating in the manufacturing industry. The data is acquired via an online questionnaire. The research has been conducted as a quantitative study utilizing the methods of statistical analysis, such as correlation analysis and factor analysis. The essential results of this thesis are identified risk-procedure connections, and the importance of different risks and procedures in the respondent companies.

Improving business processes in a globally dispersed make-to-order supply chain. Case study on outbound logistics in a Multinational Corporation

The purpose of this thesis is to find out how outbound logistics process can be improved by reducing unnecessary waste in a globally dispersed make-to-order (MTO) supply chain. The research problem was addressed by a multinational corporation that aims to find a solution for reducing unnecessary waste in their outbound logistics process. The focus is on customized products that are delivered via sea transportation. Theoretical framework for improving outbound logistics processes in globally dispersed MTO supply chain was created based on business process management, Porter’s value chain theory, value stream mapping and current reality tree. The empirical research was conducted by using constructive approach due to its ability to research a practical problem and to improve the existing practices. The data was collected from ten semi-structured interviews and three non-participant observations. By analysing the data and applying the theoretical framework, five types of waste were detected in the process that were seen to derive from six root causes. Practical solution was constructed to reduce the waste in the process by combining the existing literature with the ideas raising from empirical data. The results of this thesis suggest that a MNC with a globally dispersed MTO supply chain can improve its outbound logistics process by applying activities that enhance internal and external integration, collaboration and coordination, and increase predictability of the process. This research has practical relevance both for the case company as well as for other MNCs with globally dispersed MTO supply chains that aim to improve their outbound logistics processes. This research contributes to the BPM and CRA research by providing an evidence for their applicability in the new context.