Social skills as predictors of communication, performance and quality of collaboration in project-based learning

The assumption that social skills are necessary ingredients of collaborative learning is well established but rarely empirically tested. In addition, most theories on collaborative learning focus on social skills only at the personal level, while the social skill configurations within a learning group might be of equal importance. Using the integrative framework, this study investigates which social skills at the personal level and at the group level are predictive of task-related e-mail communication, satisfaction with performance and perceived quality of collaboration. Data collection took place in a technology-enhanced long-term project-based learning setting for pre-service teachers. For data collection, two questionnaires were used, one at the beginning and one at the end of the learning cycle which lasted 3 months. During the project phase, the e-mail communication between group members was captured as well. The investigation of 60 project groups (N = 155 for the questionnaires; group size: two or three students) and 33 groups for the e-mail communication (N = 83) revealed that personal social skills played only a minor role compared to group level configurations of social skills in predicting satisfaction with performance, perceived quality of collaboration and communication behaviour. Members from groups that showed a high and/or homogeneous configuration of specific social skills (e.g., cooperation/compromising, leadership) usually were more satisfied and saw their group as more efficient than members from groups with a low and/or heterogeneous configuration of skills.

New Methodology for Integrating Teams into Multidisciplinary Project Based Learning

This paper describes the collaboration among students and professors in four different subjects, to develop multidisciplinary projects. The objective is to simulate the conditions in a company environment. A new methodology based on student interaction and content development in a Wiki environment has been developed. The collaborative server created an ‘out of the classroom’ discussion forum for students of different subjects, and allowed them to compile a ‘project work’ portfolio. Students and professors participated with enthusiasm, due to the correct well-distributed work and the easiness of use of the selected platform in which only an internet connected computer is needed to create and to discuss the multidisciplinary projects. Quality of developed projects has been dramatically improved due to integration of results provided from the different teams.

Games based learning for Exploring Cultural Conflict

In this paper we discuss the early stage design of MIXER, a technology enhance educational application focused at supporting children in learning about cultural conflict, achieved through the use of a game with an effective embodied AI agent. MIXER is being developed re-using existing technology applied to a different context and purpose with the aim of creating an educational and enjoyable experience for 9-11 year olds. This paper outlines MIXER’s underpinning technology and theory. It presents early stage design and development, highlighting current research directions.

Project-based learning experience on Data Structures course

This paper presents the innovations in the practical work of the Data Structures subject carried out in the last five years, including a transition period and a first year of implantation of the European Higher Education Area. The practical coursework is inspired by a project-based methodology and from 2008/2009 additional laboratory sessions are included in the subject schedule. We will present the academic results and ratios of the mentioned time period which imply a significant improvement on students' performance.

Small Projects: A Method for improving Learning.

Ideas concerning problem-based learning (PBL) developed after running different experiences in different Spanish Universities, are discussed. The driver for introducing PBL has been the requirement for studying Mathematics by the Engineering students. A methodology hybrid of problem-based learning for Mathematics in Engineering studies is proposed. The model is a combination of formal lectures, practical and laboratory sessions with autonomous small projects.

Optimización de la composición del hueco de fachada en materia de eficiencia energética. Propuesta de indicador como herramienta para el análisis integral del elemento acristalado = Energy performance optimization of window systems. Proposal of an indicator as a tool for an integrated analysis of glazing

La hipótesis de esta tesis es: "La optimización de la ventana considerando simultáneamente aspectos energéticos y aspectos relativos a la calidad ambiental interior (confort higrotérmico, lumínico y acústico) es compatible, siempre que se conozcan y consideren las sinergias existentes entre ellos desde las primeras fases de diseño". En la actualidad se desconocen las implicaciones de muchas de las decisiones tomadas en torno a la ventana; para que su eficiencia en relación a todos los aspectos mencionados pueda hacerse efectiva es necesaria una herramienta que aporte más información de la actualmente disponible en el proceso de diseño, permitiendo así la optimización integral, en función de las circunstancias específicas de cada proyecto. En la fase inicial de esta investigación se realiza un primer acercamiento al tema, a través del estado del arte de la ventana; analizando la normativa existente, los componentes, las prestaciones, los elementos experimentales y la investigación. Se observa que, en ocasiones, altos requisitos de eficiencia energética pueden suponer una disminución de las prestaciones del sistema en relación con la calidad ambiental interior, por lo que surge el interés por integrar al análisis energético aspectos relativos a la calidad ambiental interior, como son las prestaciones lumínicas y acústicas y la renovación de aire. En este punto se detecta la necesidad de realizar un estudio integral que incorpore los distintos aspectos y evaluar las sinergias que se dan entre las distintas prestaciones que cumple la ventana. Además, del análisis de las soluciones innovadoras y experimentales se observa la dificultad de determinar en qué medida dichas soluciones son eficientes, ya que son soluciones complejas, no caracterizadas y que no están incorporadas en las metodologías de cálculo o en las bases de datos de los programas de simulación. Por lo tanto, se plantea una segunda necesidad, generar una metodología experimental para llevar a cabo la caracterización y el análisis de la eficiencia de sistemas innovadores. Para abordar esta doble necesidad se plantea la optimización mediante una evaluación del elemento acristalado que integre la eficiencia energética y la calidad ambiental interior, combinando la investigación teórica y la investigación experimental. En el ámbito teórico, se realizan simulaciones, cálculos y recopilación de información de distintas tipologías de hueco, en relación con cada prestación de forma independiente (acústica, iluminación, ventilación). A pesar de haber partido con un enfoque integrador, resulta difícil esa integración detectándose una carencia de herramientas disponible. En el ámbito experimental se desarrolla una metodología para la evaluación del rendimiento y de aspectos ambientales de aplicación a elementos innovadores de difícil valoración mediante la metodología teórica. Esta evaluación consiste en el análisis comparativo experimental entre el elemento innovador y un elemento estándar; para llevar a cabo este análisis se han diseñado dos espacios iguales, que denominamos módulos de experimentación, en los que se han incorporado los dos sistemas; estos espacios se han monitorizado, obteniéndose datos de consumo, temperatura, iluminancia y humedad relativa. Se ha realizado una medición durante un periodo de nueve meses y se han analizado y comparado los resultados, obteniendo así el comportamiento real del sistema. Tras el análisis teórico y el experimental, y como consecuencia de esa necesidad de integrar el conocimiento existente se propone una herramienta de evaluación integral del elemento acristalado. El desarrollo de esta herramienta se realiza en base al procedimiento de diagnóstico de calidad ambiental interior (CAI) de acuerdo con la norma UNE 171330 “Calidad ambiental en interiores”, incorporando el factor de eficiencia energética. De la primera parte del proceso, la parte teórica y el estado del arte, se obtendrán los parámetros que son determinantes y los valores de referencia de dichos parámetros. En base a los parámetros relevantes obtenidos se da forma a la herramienta, que consiste en un indicador de producto para ventanas que integra todos los factores analizados y que se desarrolla según la Norma UNE 21929 “Sostenibilidad en construcción de edificios. Indicadores de sostenibilidad”. ABSTRACT The hypothesis of this thesis is: "The optimization of windows considering energy and indoor environmental quality issues simultaneously (hydrothermal comfort, lighting comfort, and acoustic comfort) is compatible, provided that the synergies between these issues are known and considered from the early stages of design ". The implications of many of the decisions made on this item are currently unclear. So that savings can be made, an effective tool is needed to provide more information during the design process than the currently available, thus enabling optimization of the system according to the specific circumstances of each project. The initial phase deals with the study from an energy efficiency point of view, performing a qualitative and quantitative analysis of commercial, innovative and experimental windows. It is observed that sometimes, high-energy efficiency requirements may mean a reduction in the system's performance in relation to user comfort and health, that's why there is an interest in performing an integrated analysis of indoor environment aspects and energy efficiency. At this point a need for a comprehensive study incorporating the different aspects is detected, to evaluate the synergies that exist between the various benefits that meet the window. Moreover, from the analysis of experimental and innovative windows, a difficulty in establishing to what extent these solutions are efficient is observed; therefore, there is a need to generate a methodology for performing the analysis of the efficiency of the systems. Therefore, a second need arises, to generate an experimental methodology to perform characterization and analysis of the efficiency of innovative systems. To address this dual need, the optimization of windows by an integrated evaluation arises, considering energy efficiency and indoor environmental quality, combining theoretical and experimental research. In the theoretical field, simulations and calculations are performed; also information about the different aspects of indoor environment (acoustics, lighting, ventilation) is gathered independently. Despite having started with an integrative approach, this integration is difficult detecting lack available tools. In the experimental field, a methodology for evaluating energy efficiency and indoor environment quality is developed, to be implemented in innovative elements which are difficult to evaluate using a theoretical methodology This evaluation is an experimental comparative analysis between an innovative element and a standard element. To carry out this analysis, two equal spaces, called experimental cells, have been designed. These cells have been monitored, obtaining consumption, temperature, luminance and relative humidity data. Measurement has been performed during nine months and results have been analyzed and compared, obtaining results of actual system behavior. To advance this optimization, windows have been studied from the point of view of energy performance and performance in relation to user comfort and health: thermal comfort, acoustic comfort, lighting comfort and air quality; proposing the development of a methodology for an integrated analysis including energy efficiency and indoor environment quality. After theoretical and experimental analysis and as a result of the need to integrate existing knowledge, a comprehensive evaluation procedure for windows is proposed. This evaluation procedure is developed according to the UNE 171330 "Indoor Environmental Quality", also incorporating energy efficiency and cost as factors to evaluate. From the first part of the research process, outstanding parameters are chosen and reference values of these parameters are set. Finally, based on the parameters obtained, an indicator is proposed as windows product indicator. The indicator integrates all factors analyzed and is developed according to ISO 21929-1:2011"Sustainability in building construction. Sustainability indicators. Part 1: Framework for the development of indicators and a core set of indicators for buildings".

Effect of fire on the microstructure and mechanical response of structural steels for building construction

The research is an exhaustive study of the microstructure and of the stress-strain curves of structural steel S460N at temperatures typical of a fire. It includes a fractographic study of the fracture suifaces of cylindrical specimens, tensile tested at different fire scenarios, explaining the relationship between the failure micromechanisms and temperature. The paper ends with the comparison between the experimentally found strain-stress curves with that one's proposed by the EUROCODE EC3, resulting that in the case of steel S460N these are on the side ofsafety.

Effect of fire on the microstructure and mechanical response of structural steels for building construction

The research is an exhaustive study of the microstructure and of the stress-strain curves of structural steel S460N at temperatures typical of a fire. It includes a fractographic study of the fracture suifaces of cylindrical specimens, tensile tested at different fire scenarios, explaining the relationship between the failure micromechanisms and temperature. The paper ends with the comparison between the experimentally found strain-stress curves with that one's proposed by the EUROCODE EC3, resulting that in the case of steel S460N these are on the side ofsafety.

Active learning and generic competences in an operating systems course

The Bologna Declaration and the implementation of the European Higher Education Area are promoting the use of active learning methodologies. The aim of this study is to evaluate the effects obtained after applying active learning methodologies to the achievement of generic competences as well as to the academic performance. This study has been carried out at the Universidad Politécnica de Madrid, where these methodologies have been applied to the Operating Systems I subject of the degree in Technical Engineering in Computer Systems. The fundamental hypothesis tested was whether the implementation of active learning methodologies (cooperative learning and problem based learning) favours the achievement of certain generic competences (‘teamwork’ and ‘planning and time management’) and also whether this fact improved the academic performance of our students. The original approach of this work consists in using psychometric tests to measure the degree of acquired student’s generic competences instead of using opinion surveys, as usual. Results indicated that active learning methodologies improve the academic performance when compared to the traditional lecture/discussion method, according to the success rate obtained. These methods seem to have as well an effect on the teamwork competence (the perception of the behaviour of the other members in the group) but not on the perception of each students’ behaviour. Active learning does not produce any significant change in the generic competence ‘planning and time management'.

Supporting the design and development of Project Based Learning courses.

The use of Project Based Learning has spread widely over the last decades, not only throughout countries but also among disciplines. One of the most significant characteristics of this methodology is the use of ill-structured problems as central activity during the course, which represents an important difficulty for both teachers and students. This work presents a model, supported by a tool, focused on helping teachers and students in Project Based Learning, overcoming these difficulties. Firstly, teachers are guided in designing the project following the main principles of this methodology. Once the project has been specified at the desired level of depth, the same tool helps students to finish the project specification and organize the implementation. Collaborative work among different users is allowed in both phases. This tool has been satisfactorily tested designing two real projects used in Computer Engineering and Software Engineering degrees.

Enhancing web-based learning resources with quizzes through an Authoring Tool and an Audience Response System

Quizzes are among the most widely used resources in web-based education due to their many benefits. However, educators need suitable authoring tools that can be used to create reusable quizzes and to enhance existing materials with them. On the other hand, if teachers use Audience Response Systems (ARSs) they can get instant feedback from their students and thereby enhance their instruction. This paper presents an online authoring tool for creating reusable quizzes and enhancing existing learning resources with them, and a web-based ARS that enables teachers to launch the created quizzes and get instant feedback from the class. Both the authoring tool and the ARS were evaluated. The evaluation of the authoring tool showed that educators can effectively enhance existing learning resources in an easy way by creating and adding quizzes using that tool. Besides, the different factors that assure the reusability of the created quizzes are also exposed. Finally, the evaluation of the developed ARS showed an excellent acceptance of the system by teachers and students, and also it indicated that teachers found the system easy to set up and use in their classrooms.

Análisis del rendimiento académico del alumnado de último curso de ingeniería mediante nuevas tecnologías en el proceso de enseñanza‐aprendizaje

En el marco del Espacio Europeo de Educación Superior los estudios deben de estar orientados a facilitar la movilidad de los futuros egresados para que su inclusión en mundo laboral sea global y en este contexto, los sistemas educativos deben introducir cambios en el proceso de enseñanza – aprendizaje y en la gestión. Como uno de los elementos básicos de la creación del EEES es el aprendizaje a lo largo de la vida, se deben adoptar metodologías que doten al estudiante de capacidades para poder enfrentarse a todos los retos de la vida laboral. A través de la presente investigación se trata de aportar una visión real de la aplicación efectiva de un modelo de Aprendizaje Basado en Problemas y el Método del Caso acompañados de una fuerte Acción Tutorial y el uso de la Tecnología de la Información y Comunicación en la Universidad (TIC). Se considera asimismo de gran interés para la mejora del aprendizaje conocer cuál es la opinión real de los estudiantes universitarios, ya que son los principales implicados en relación a un modelo formativo apoyado en el Aprendizaje Basado en Problemas, el Método del Caso, la Acción Tutorial y utilización de las TIC. A través de este estudio se pretende comprobar y valorar cual es la visión real que los alumnos tienen de estas aplicaciones y como las utilizan. Para ello durante los últimos cursos se ha trabajado con alumnos de los últimos cursos de la Escuela Técnica Superior de Ingeniería Civil de la Universidad Politécnica de Madrid aplicando técnicas de Aprendizaje Basado en Problemas y el Método del Caso conjuntamente con la utilización de un Modelo de Acción Tutorial y el uso de la TIC. La tarea se ha centrado en desarrollar, a lo largo de los cursos 2009-10, 2010-11, 2011-12 y 2013-14, un modelo de Acción Tutorial con los alumnos matriculados en las asignaturas de Caminos I, Caminos II, Aforos y Ordenación del Tráfico, asignaturas de la titulación de Ingeniería Técnica de Obras Públicas, y por otro lado, en la asignatura de Caminos, perteneciente a la titulación de Ingeniería Civil. Mediante cuestionarios al inicio y final del curso, se ha conocido cuál es la opinión que poseen los alumnos sobre esta acción. A continuación, durante los cursos 2010-11, 2011-12 y 2013-14 se desarrolla un modelo experimental para evaluar las mejoras, tanto de rendimiento como de adquisición de competencias, utilizando el Aprendizaje Basado en Problemas y el Método del Caso acompañados de las TIC en el proceso de enseñanza–aprendizaje como modelo de Acción Tutorial con alumnos. ABSTRACT Abstract In the frame of the European Higher Education Area, the studies must be faced to facilitate mobility of future graduates for inclusion in the workplace is global and in this context, educational systems must introduce changes in the process of education-learning and management. Since one of the basic elements of the creation of the EHEA is learning throughout life, there must be adopted methodologies that provide the student of aptitudes to be able to face all the challenges of the labor life. Through this research it is provided a real vision of the effective application of a Model of Learning Based on Problems and the Case Method accompanied by a strong Tutorial Action and the use of ITC in the University. It is also considered of great interest for the improvement of learning to know what the real opinion of the college students is, as they are the main players in relation in a training model based on Problem-Based Learning, the Case Method, the Tutorial Action and Use of ICT. Through this study it is expected to verify and assess which is the real vision that students have about these applications and how they use them. In order to achieve the goal of this research project, during the last three years I have been working with students of last courses of the Civil Engineering School of the Technical University of Madrid applying with them techniques of Problem-Based Learning and the Case Method together with the use of a Model Action Tutorial and the Use of Information Technology and Communication (ICT). The task has focused on developing, over the 2009-10, 2010-11, 2011-12 and 2013-14 courses, a model of Tutorial Action with students enrolled in the subjects of Roads I, Roads II, Traffic Gauging and Traffic Management, all of them of the old degree in Civil Engineering (1971 Study Plan), and secondly, on the subject of Roads which belong to the current degree of Civil Engineering. Using questionnaires at the beginning and end of the course the perception that students have on this action.. Then, during the 2010-11, 2011-12 and 2013-14 courses an experimental model is developed to evaluate improvements in both performance and skills acquisition, using Problem-Based Learning and the Case Method together with the ICT in Teaching-Learning Pprocess as a model of Tutorial Action with students.

Emoções desencadeadas no contexto de um projeto interdisciplinar no ensino de ciências

O desenvolvimento do pensamento e do conhecimento humano esteve vinculado, por muitos séculos a uma visão dual do Homem enquanto corpo/mente, matéria/espírito, razão/emoção, cognição/afeto. Com o surgimento de novas concepções teóricas especialmente a abordagem histórico-social de Vigotski, fundamentada em determinantes culturais, históricos e sociais da condição humana, foi possível uma nova releitura das dimensões cognitiva e emocional, na direção de uma interpretação monista do ser Humano. No entanto, mesmo diante desta interpretação integral do indivíduo, ainda persiste em larga escala no ensino, particularmente no ensino de Ciências, a tradicional busca do desenvolvimento da racionalidade e da lógica em detrimento à dimensão afetivoemocional. Este trabalho de pesquisa pretende focar especial atenção na dimensão afetivo-emocional nas relações estabelecidas em sala de aula quando um projeto de abordagem interdisciplinar é implementado. A pesquisa foi desenvolvida com uma turma do terceiro ano do Ensino Médio constituída de 22 alunos, de uma escola privada localizada em uma cidade do interior do Estado de São Paulo. Os resultados refletem a existência de conflitos emocionais significativos entre os alunos, merecendo, portanto, um planejamento docente que permita ações de gestão dessas emoções no contexto do processo de ensino e de aprendizagem.

Building family/general practice research capacity

To promote the range of interventions for building family/general practice (family medicine) research capacity, we describe successful international examples. Such examples of interventions that build research capacity focus on diseases and illness research, as well as process research; monitor the output of research in family/general practice (family medicine); increase the number of family medicine research journals; encourage and enable research skills acquisition (including making it part of professional training); strengthen the academic base; and promote research networks and collaborations. The responsibility for these interventions lies with the government, colleges and academies, and universities. There are exciting and varied methods of building research capacity in family medicine.