Heusler compounds as thermoelectric materials

Heusler compounds as thermoelectric materialsrnrnThis work reports on Heusler and Half Heusler compounds and their thermoelectric properties. Several compounds were synthesized and their resistivity, Seebeck coefficient, thermal conductivity, and the figure of merit were determined. The results are presented in the following chapters.rnrnIn chapter 3 Co was substituted with Ni and Fe in the series TiCo1-x(Fe0.5Ni0.5)xSb. The substitution lead to a reduced loss of Sb during the synthesis. Further the Seebeck coefficient was increased and the thermal conductivity was reduced. These observations can be used to significantly improve the quality of TiCoSb based compounds in thermoelectric applications. rnrnIn chapter 4 the series TiCo1-xNixSnxSb1-x was investigated. Ni was substituted with Co and Sn with Sb. Especially for high Ni concentrations the figure of merit was enhanced compared to unsubstituted TiCoSb. This enhancement is based on the strong reduction of the thermal conductivity. The found values are among the lowest that have been determined up to date for Heusler compounds. rnrnIn chapter 5 Li containing Heusler compounds were theoretically and experimentally investigated. Li containing Heusler compounds are of special interest because the Li atoms scatter phonons efficiently. Therefore the thermal conductivity is decreased. The thermoelectric properties and especially the thermal conductivity are investigated in this chapter.rnrnIn chapter 6 several substitutions of TiCoSb were investigated. In the series TiCo1+xSb additional Co was introduced into the vacancies of the compound and the effect on the thermoelectric properties was measured. In the series TiCo1-xCuxSb Co was substituted with Cu. No significant enhancement of the ZT value were observed. In the series TiCoSb1-xBix Sb was substituted by Bi. The thermoelectric properties were significantly enhanced for small Bi concentrations. The Seebeck coefficient was increased and the resistivity was reduced at the same time. This unusual phenomenon is explained by band structure calculations.rnrnIn chapter 7 the material class of half metallic ferromagnets was investigated as a new materialclass for thermoelectric applications. The 26 valence electron compounds Co2TiSi, Co2TiGe, and Co2TiSn were used as model systems. The transport properties were determined theoretically. Then the properties were measured and compared to the calculated ones. The calculated values are in good agreement with the experimentally determined ones. The observed Seebeck coefficient has a big value and is nearly constant above the Curie temperature. This makes the materials appealing for the use as materials in thermocouples.rn

High frequency acoustics in colloid-based meso- and nanostructures by spontaneous Brillouin light scattering

Materials that can mold the flow of elastic waves of certain energy in certain directions are called phononic materials. The present thesis deals essentially with such phononic systems, which are structured in the mesoscale (<1 µm), and with their individual components. Such systems show interesting phononic properties in the hypersonic region, i.e., at frequencies in the GHz range. It is shown that colloidal systems are excellent model systems for the realization of such phononic materials. Therefore, different structures and particle architectures are investigated by Brillouin light scattering, the inelastic scattering of light by phonons.rnThe experimental part of this work is divided into three chapters: Chapter 4 is concerned with the localized mechanical waves in the individual spherical colloidal particles, i.e., with their resonance- or eigenvibrations. The investigation of these vibrations with regard to the environment of the particles, their chemical composition, and the influence of temperature on nanoscopically structured colloids allows novel insights into the physical properties of colloids at small length scales. Furthermore, some general questions concerning light scattering on such systems, in dispute so far, are convincingly addressed.rnChapter 5 is a study of the traveling of mechanical waves in colloidal systems, consisting of ordered and disordered colloids in liquid or elastic matrix. Such systems show acoustic band gaps, which can be explained geometrically (Bragg gap) or by the interaction of the acoustic band with the eigenvibrations of the individual spheres (hybridization gap).rnWhile the latter has no analogue in photonics, the presence of strong phonon scatterers, when a large elastic mismatch between the composite components exists, can largely impact phonon propagation in analogy to strong multiple light scattering systems. The former is exemplified in silica based phononic structures that opens the door to new ways of sound propagation manipulation.rnChapter 6 describes the first measurement of the elastic moduli in newly fabricated by physical vapor deposition so-called ‘stable organic glasses’. rnIn brief, this thesis explores novel phenomena in colloid-based hypersonic phononic structures, utilizing a versatile microfabrication technique along with different colloid architectures provided by material science, and applying a non-destructive optical experimental tool to record dispersion diagrams.rn

Muster und Prozesse in einer Microcebus-Hybridzone in Südostmadagaskar

Im Rahmen dieser Doktorarbeit wurde in zwei Schwerpunktanalysen mit eine Teil- und Gesamtdatensatz die Untersuchung der Hybridisierung zwischen den beiden Microcebus-Arten M. murinus und M. griseorufus im Ökoton Südostmadagaskars umfangreich und vertieft untersucht. Für die genetischen Analysen wurden die maternal vererbte mitochondriale Hypervariable Region I (HVR 1) und neun nukleäre biparental vererbte Mikrosatellitenmarker eingesetzt. Als weiterer Datensatz wurden morphometrische Daten verwendet. Für die erste Schwerpunktanalyse wurde ein bereits vorhandener Teildatensatz (Hapke 2005 & Gligor 2006) mit Daten von insgesamt 162 Individuen aus neun Populationen der Dornbuschzone, der Übergangswaldzone und des Küstenwaldgebietes eingesetzt. In der zweiten Schwerpunktanalyse wurde eine umfangreiche Untersuchung der Microcebus griseoruus-M. murinus- Hybridzone vorgenommen. Für diese detaillierte Charakterisierung der Hybridzone wurde eine ausgedehnte und fein auflösende Probennahme in einem als Kernzone definierten Bereich, der die gesamte Übergangswaldzone und die dazu benachbarten Dornbuschgebiete umfasste, durchgeführt. Die morphometrischen und genetischen Daten der neu beprobten Individuen dieser Kernzone wurden mit den Daten des Teildatensatzes und weiteren Daten aus Küstenwaldpopulationen (Hapke 2005) zu einem Gesamtdatensatz zusammengefasst. Die Integration des Teildatensatzes in den Gesamtdatensatz erforderte umfassende und zeitintensive Labor- und Analysearbeiten, die im Rahmen dieser Doktorarbeit durchgeführt wurden. Der Gesamtdatensatz umfasste insgesamt 569 Individuen der Gattung Microcebus aus 29 Untersuchungsstandorten. Die mit beiden Datensätzen durchgeführte Analyse morphometrischer Daten zeigte deutlich, dass die Mehrzahl der Individuen aus der Übergangswaldzone einen intermediären Morphotyp aufweist. Durch die mit den Daten des Teildatensatzes durchgeführten Bayes’schen Clusteranalysen und Assignment-Tests, das vornehmlich in den Populationen der Übergangszone beobachtete signifikante Kopplungsungleichgewicht und Heterozygotendefizit, die festgestellte Verteilung der mitochondrialen Haplotypen und das kontrastierende Muster zwischen nukleären Mikrosatellitengenotypen und mitochondrialen Haplotypen in den Übergangswaldpopulationen konnte erstmals das Vorkommen einer Hybridzone zwischen Microcebus-Arten wissenschaftlich fundiert festgestellt werden. Die Ergebnisse dieser Schwerpunktanalyse wurden in der Fachzeitschrift Molecular Ecology publiziert (Gligor et al. 2009). Die in der ersten Schwerpunktanalyse festgestellte Hybridzone konnte durch die zweite Schwerpunktanalyse mit den genetischen und morphometrischen Daten des Gesamtdatensatzes nicht nur bestätigt werden, sondern auch auf die gesamte Übergangswaldzone erweitert werden. Ferner wurden starke Hinweise auf eine Hybridisierung beider Microcebus-Arten an einigen Dornbuschstandorten der Kernzone gefunden. Durch die große Datenmenge des Gesamtdatensatzes, vor allem aus der Kernzone des Untersuchungsgebietes, war es möglich eine fundierte Charakterisierung der Microcebus griseoruus-M. murinus- Hybridzone durchzuführen. Die Übereinstimmung der Hybridzone mit dem beobachteten Vegetationsmosaik zusammen mit den Ergebnissen der PCA, der PCoA und der Bayes’schen Clusteranalyse sprechen für das Modell der „Mosaik Hybridzone“, während die Einzelbetrachtung der mosaikartig verteilten intermediären Übergangswälder eine hohe Abundanz der Hybride aufzeigte und somit eher das „Bounded Hybrid Superiority model“ unterstützt. Der gewählte geographische Beprobungsmaßstab könnte somit einen Einfluss auf die beobachtete Struktur einer Hybridzone haben. Eines der markantesten Muster in der Hybridzone ist das stark kontrastierende cyto-nukleäre Muster. Der seit ca. 3000 Jahren fortschreitende Klimawandel in Südmadagaskar und die damit verbundene Expansion des Verbreitungsgebietes der Art Microcebus griseorufus nach Osten, das in dieser Arbeit festgestellte „male-biased dispersal“ bei M. griseorufus und der Einfluss exogener Selektion sprechen stark für eine massive asymmetrische nukleäre Genintrogression von M. griseorufus-Allelen in M. murinus-Populationen, verbunden mit einer potentiellen Verdrängung der Art M. murinus aus der Übergangswaldzone. In den jeweiligen Kerngebieten Dornbusch und Küstenwald bleibt jedoch die Diskretheit beider Arten gewahrt.

Morphology and charge transport in conjugated polymers

To assist rational compound design of organic semiconductors, two problems need to be addressed. First, the material morphology has to be known at an atomistic level. Second, with the morphology at hand, an appropriate charge transport model needs to be developed in order to link charge carrier mobility to structure.rnrnThe former can be addressed by generating atomistic morphologies using molecular dynamics simulations. However, the accessible range of time- and length-scales is limited. To overcome these limitations, systematic coarse-graining methods can be used. In the first part of the thesis, the Versatile Object-oriented Toolkit for Coarse-graining Applications is introduced, which provides a platform for the implementation of coarse-graining methods. Tools to perform Boltzmann inversion, iterative Boltzmann inversion, inverse Monte Carlo, and force-matching are available and have been tested on a set of model systems (water, methanol, propane and a single hexane chain). Advantages and problems of each specific method are discussed.rnrnIn partially disordered systems, the second issue is closely connected to constructing appropriate diabatic states between which charge transfer occurs. In the second part of the thesis, the description initially used for small conjugated molecules is extended to conjugated polymers. Here, charge transport is modeled by introducing conjugated segments on which charge carriers are localized. Inter-chain transport is then treated within a high temperature non-adiabatic Marcus theory while an adiabatic rate expression is used for intra-chain transport. The charge dynamics is simulated using the kinetic Monte Carlo method.rnrnThe entire framework is finally employed to establish a relation between the morphology and the charge mobility of the neutral and doped states of polypyrrole, a conjugated polymer. It is shown that for short oligomers, charge carrier mobility is insensitive to the orientational molecular ordering and is determined by the threshold transfer integral which connects percolating clusters of molecules that form interconnected networks. The value of this transfer integral can be related to the radial distribution function. Hence, charge mobility is mainly determined by the local molecular packing and is independent of the global morphology, at least in such a non-crystalline state of a polymer.

Effect of mixing, particle interaction, and spatial dimension on the glass transition

In this thesis, the influence of composition changes on the glass transition behavior of binary liquids in two and three spatial dimensions (2D/3D) is studied in the framework of mode-coupling theory (MCT).The well-established MCT equations are generalized to isotropic and homogeneous multicomponent liquids in arbitrary spatial dimensions. Furthermore, a new method is introduced which allows a fast and precise determination of special properties of glass transition lines. The new equations are then applied to the following model systems: binary mixtures of hard disks/spheres in 2D/3D, binary mixtures of dipolar point particles in 2D, and binary mixtures of dipolar hard disks in 2D. Some general features of the glass transition lines are also discussed. The direct comparison of the binary hard disk/sphere models in 2D/3D shows similar qualitative behavior. Particularly, for binary mixtures of hard disks in 2D the same four so-called mixing effects are identified as have been found before by Götze and Voigtmann for binary hard spheres in 3D [Phys. Rev. E 67, 021502 (2003)]. For instance, depending on the size disparity, adding a second component to a one-component liquid may lead to a stabilization of either the liquid or the glassy state. The MCT results for the 2D system are on a qualitative level in agreement with available computer simulation data. Furthermore, the glass transition diagram found for binary hard disks in 2D strongly resembles the corresponding random close packing diagram. Concerning dipolar systems, it is demonstrated that the experimental system of König et al. [Eur. Phys. J. E 18, 287 (2005)] is well described by binary point dipoles in 2D through a comparison between the experimental partial structure factors and those from computer simulations. For such mixtures of point particles it is demonstrated that MCT predicts always a plasticization effect, i.e. a stabilization of the liquid state due to mixing, in contrast to binary hard disks in 2D or binary hard spheres in 3D. It is demonstrated that the predicted plasticization effect is in qualitative agreement with experimental results. Finally, a glass transition diagram for binary mixtures of dipolar hard disks in 2D is calculated. These results demonstrate that at higher packing fractions there is a competition between the mixing effects occurring for binary hard disks in 2D and those for binary point dipoles in 2D.

Structure and properties of nanostructures from polyelectrolytes and porphyrins: Self-Assembly in aqueous solution

In this work self-assembling model systems in aqueous solution were studied. The systems contained charged polymers, polyelectrolytes, that were combined with oppositely charged counterions to build up supramolecular structures. With imaging, scattering and spectroscopic techniques it was investigated how the structure of building units influences the structure of their assemblies. Polyelectrolytes with different chemical structure, molecular weight and morphology were investigated. In addition to linear polyelectrolytes, semi-flexible cylindrical bottle-brush polymers that possess a defined cross-section and a relatively high persistence along the backbone were studied. The polyelectrolytes were combined with structural organic counterions having charge numbers one to four. Especially the self-assembly of polyelectrolytes with different tetravalent water-soluble porphyrins was studied. Porphyrins have a rigid aromatic structure that has a structural effect on their self-assembly behavior and through which porphyrins are capable of self-aggregation via π-π interaction. The main focus of the thesis is the self-assembly of cylindrical bottle-brush polyelectrolytes with tetravalent porphyrins. It was shown that the addition of porphyrins to oppositely charged brush molecules induces a hierarchical formation of stable nanoscale brush-porphyrin networks. The networks can be disconnected by addition of salt and single porphyrin-decoratedrncylindrical brush polymers are obtained. These two new morphologies, brush-porphyrin networks and porphyrin-decorated brush polymers, may have potential as functional materials with interesting mechanical and optical properties.

Übergangsmomente zwischen angeregten Zuständen mit der RI-CC2-Methode: Implementierung und Anwendung auf Triplett-Excimere

Die Themengebiete dieser Arbeit umfassen sowohl methodische Weiterentwicklungen im Rahmen der ab initio zweiter Ordnungsmethoden CC2 und ADC(2) als auch Anwendungen dieser Weiterentwick-lungen auf aktuelle Fragestellungen. Die methodischen Erweiterungen stehen dabei hauptsächlich im Zusammenhang mit Übergangsmomenten zwischen angeregten Zuständen. Durch die Implementie-rung der selbigen ist nun die Berechnung transienter Absorptionsspektren möglich. Die Anwendungen behandeln vorwiegend das Feld der organischen Halbleiter und deren photo-elektronische Eigen-schaften. Dabei spielen die bislang wenig erforschten Triplett-Excimere eine zentrale Rolle.rnDie Übergangsmomente zwischen angeregten Zuständen wurden in das Programmpaket TUR-BOMOLE implementiert. Dadurch wurde die Berechnung der Übergangsmomente zwischen Zustän-den gleicher Multiplizität (d.h. sowohl Singulett-Singulett- als auch Triplett-Triplett-Übergänge) und unterschiedlicher Multiplizität (also Singulett-Triplett-Übergänge) möglich. Als Erweiterung wurde durch ein Interface zum ORCA Programm die Berechnung von Spin-Orbit-Matrixelementen (SOMEs) implementiert. Des Weiteren kann man mit dieser Implementierung auch Übergänge in offenschaligen Systemen berechnen. Um den Speicherbedarf und die Rechenzeit möglichst gering zu halten wurde die resolution-of-the-identity (RI-) Näherung benutzt. Damit lässt sich der Speicherbedarf von O(N4) auf O(N3) reduzieren, da die mit O(N4) skalierenden Größen (z. B. die T2-Amplituden) sehr effizient aus RI-Intermediaten berechnet werden können und daher nicht abgespeichert werden müssen. Dadurch wird eine Berechnung für mittelgroße Moleküle (ca. 20-50 Atome) mit einer angemessenen Basis möglich.rnDie Genauigkeit der Übergangsmomente zwischen angeregten Zuständen wurde für einen Testsatz kleiner Moleküle sowie für ausgewählte größere organische Moleküle getestet. Dabei stellte sich her-aus, dass der Fehler der RI-Näherung sehr klein ist. Die Vorhersage der transienten Spektren mit CC2 bzw. ADC(2) birgt allerdings ein Problem, da diese Methoden solche Zustände nur sehr unzureichend beschreiben, welche hauptsächlich durch zweifach-Anregungen bezüglich der Referenzdeterminante erzeugt werden. Dies ist für die Spektren aus dem angeregten Zustand relevant, da Übergänge zu diesen Zuständen energetisch zugänglich und erlaubt sein können. Ein Beispiel dafür wird anhand eines Singulett-Singulett-Spektrums in der vorliegenden Arbeit diskutiert. Für die Übergänge zwischen Triplettzuständen ist dies allerdings weniger problematisch, da die energetisch niedrigsten Doppelan-regungen geschlossenschalig sind und daher für Tripletts nicht auftreten.rnVon besonderem Interesse für diese Arbeit ist die Bildung von Excimeren im angeregten Triplettzu-stand. Diese können aufgrund starker Wechselwirkungen zwischen den π-Elektronensystemen großer organischer Moleküle auftreten, wie sie zum Beispiel als organische Halbleiter in organischen Leucht-dioden eingesetzt werden. Dabei können die Excimere die photo-elktronischen Eigenschaften dieser Substanzen signifikant beeinflussen. Im Rahmen dieser Dissertation wurden daher zwei solcher Sys-teme untersucht, [3.3](4,4’)Biphenylophan und das Naphthalin-Dimer. Hierzu wurden die transienten Anregungsspektren aus dem ersten angeregten Triplettzustand berechnet und diese Ergebnisse für die Interpretation der experimentellen Spektren herangezogen. Aufgrund der guten Übereinstimmung zwischen den berechneten und den experimentellen Spektren konnte gezeigt werden, dass es für eine koplanare Anordnung der beiden Monomere zu einer starken Kopplung zwischen lokal angereg-ten und charge-transfer Zuständen kommt. Diese Kopplung resultiert in einer signifikanten energeti-schen Absenkung des ersten angeregten Zustandes und zu einem sehr geringen Abstand zwischen den Monomereinheiten. Dabei ist der angeregte Zustand über beide Monomere delokalisiert. Die star-ke Kopplung tritt bei einem intermolekularen Abstand ≤4 Å auf, was einem typischen Abstand in orga-nischen Halbleitern entspricht. In diesem Bereich kann man zur Berechnung dieser Systeme nicht auf die Förster-Dexter-Theorie zurückgreifen, da diese nur für den Grenzfall der schwachen Kopplung gültig ist.

Magnetic spectroscopy and microscopy of functional materials

Heusler intermetallics Mn$_{2}Y$Ga and $X_{2}$MnGa ($X,Y$=Fe, Co, Ni) undergo tetragonal magnetostructural transitions that can result in half metallicity, magnetic shape memory, or the magnetocaloric effect. Understanding the magnetism and magnetic behavior in functional materials is often the most direct route to being able to optimize current materials and design future ones.rnrnSynchrotron soft x-ray magnetic spectromicroscopy techniques are well suited to explore the the competing effects from the magnetization and the lattice parameters in these materials as they provide detailed element-, valence-, and site-specific information on the coupling of crystallographic ordering and electronic structure as well as external parameters like temperature and pressure on the bonding and exchange.rnrnFundamental work preparing the model systems of spintronic, multiferroic, and energy-related compositions is presented for context. The methodology of synchrotron spectroscopy is presented and applied to not only magnetic characterization but also of developing a systematic screening method for future examples of materials exhibiting any of the above effects. rnrnChapters include an introduction to the concepts and materials under consideration (Chapter 1); an overview of sample preparation techniques and results, and the kinds of characterization methods employed (Chapter 2); spectro- and microscopic explorations of $X_2$MnGa/Ge (Chapter 3); spectroscopic investigations of the composition series Mn$_{2}Y$Ga to the logical Mn$_3$Ga endpoint (Chapter 4); and a summary and overview of upcoming work (Chapter 5). Appendices include the results of a “Think Tank” for the Graduate School of Excellence MAINZ (Appendix A) and details of an imaging project now in progress on magnetic reversal and domain wall observation in the classical Heusler material Co$_2$FeSi (Appendix B).

Alpha, Omega end group functionalization of RAFT polymers based on pentafluorophenyl esters and methane thiosulfonates

While polymers with different functional groups along the backbone have intensively been investigated, there is still a challenge in orthogonal functionalization of the end groups. Such well-defined systems are interesting for the preparation of multiblock (co) polymers or polymer networks, for bio-conjugation or as model systems for examining the end group separation of isolated polymer chains. rnHere, Reversible Addition Fragmentation Chain Transfer (RAFT) polymerization was employed as method to investigate improved techniques for an a, w end group functionalization. RAFT produces polymers terminated in an R group and a dithioester-Z group, where R and Z stem from a suitable chain transfer agent (CTA). rnFor alpha end group functionalization, a CTA with an activated pentafluorophenyl (PFP) ester R group was designed and used for the polymerization of various methacrylate monomers, N-isopropylacrylamide and styrene yielding polymers with a PFP ester as a end group. This allowed the introduction of inert propyl amides, of light responsive diazo compounds, of the dyes NBD, Texas Red, or Oregon Green, of the hormone thyroxin and allowed the formation of multiblocks or peptide conjugates. rnFor w end group functionalization, problems of other techniques were overcome through an aminolysis of the dithioester in the presence of a functional methane thiosulfonate (MTS), yielding functional disulfides. These disulfides were stable under ambient conditions and could be cleaved on demand. Using MTS chemistry, terminal methyl disulfides (enabling self-assembly on planar gold surfaces and ligand substitution on gold and semiconductor nanoparticles), butynyl disulfide end groups (allowing the “clicking” of the polymers onto azide functionalized surfaces and the selective removal through reduction), the bio-target biotin, and the fluorescent dye Texas Red were introduced into polymers. rnThe alpha PFP amidation could be performed under mild conditions, without substantial loss of DTE. This way, a step-wise synthesis produced polymers with two functional end groups in very high yields. rnAs examples, polymers with an anchor group for both gold nanoparticles (AuNP) and CdSe / ZnS semi-conductor nanoparticles (QD) and with a fluorescent dye end group were synthesized. They allowed a NP decoration and enabled an energy transfer from QD to dye or from dye to AuNP. Water-soluble polymers were prepared with two different bio-target end groups, each capable of selectively recognizing and binding a certain protein. The immobilization of protein-polymer-protein layers on planar gold surfaces was monitored by surface plasmon resonance.Introducing two different fluorescent dye end groups enabled an energy transfer between the end groups of isolated polymer chains and created the possibility to monitor the behavior of single polymer chains during a chain collapse. rnThe versatility of the synthetic technique is very promising for applications beyond this work.

Interacting bosons and fermions in three-dimensional optical lattice potentials

This thesis reports on the realization, characterization and analysis of ultracold bosonic and fermionic atoms in three-dimensional optical lattice potentials. Ultracold quantum gases in optical lattices can be regarded as ideal model systems to investigate quantum many-body physics. In this work interacting ensembles of bosonic 87Rb and fermionic 40K atoms are employed to study equilibrium phases and nonequilibrium dynamics. The investigations are enabled by a versatile experimental setup, whose core feature is a blue-detuned optical lattice that is combined with Feshbach resonances and a red-detuned dipole trap to allow for independent control of tunneling, interactions and external confinement. The Fermi-Hubbard model, which plays a central role in the theoretical description of strongly correlated electrons, is experimentally realized by loading interacting fermionic spin mixtures into the optical lattice. Using phase-contrast imaging the in-situ size of the atomic density distribution is measured, which allows to extract the global compressibility of the many-body state as a function of interaction and external confinement. Thereby, metallic and insulating phases are clearly identified. At strongly repulsive interaction, a vanishing compressibility and suppression of doubly occupied lattice sites signal the emergence of a fermionic Mott insulator. In a second series of experiments interaction effects in bosonic lattice quantum gases are analyzed. Typically, interactions between microscopic particles are described as two-body interactions. As such they are also contained in the single-band Bose-Hubbard model. However, our measurements demonstrate the presence of multi-body interactions that effectively emerge via virtual transitions of atoms to higher lattice bands. These findings are enabled by the development of a novel atom optical measurement technique: In quantum phase revival spectroscopy periodic collapse and revival dynamics of the bosonic matter wave field are induced. The frequencies of the dynamics are directly related to the on-site interaction energies of atomic Fock states and can be read out with high precision. The third part of this work deals with mixtures of bosons and fermions in optical lattices, in which the interspecies interactions are accurately controlled by means of a Feshbach resonance. Studies of the equilibrium phases show that the bosonic superfluid to Mott insulator transition is shifted towards lower lattice depths when bosons and fermions interact attractively. This observation is further analyzed by applying quantum phase revival spectroscopy to few-body systems consisting of a single fermion and a coherent bosonic field on individual lattice sites. In addition to the direct measurement of Bose-Fermi interaction energies, Bose-Bose interactions are proven to be modified by the presence of a fermion. This renormalization of bosonic interaction energies can explain the shift of the Mott insulator transition. The experiments of this thesis lay important foundations for future studies of quantum magnetism with fermionic spin mixtures as well as for the realization of complex quantum phases with Bose-Fermi mixtures. They furthermore point towards physics that reaches beyond the single-band Hubbard model.

Einzelmolekülspektroskopische und quantenchemische Untersuchungen zum elektronischen Energietransfer

In der vorliegenden Arbeit wurden Untersuchungen zum Mechanismus, der Dynamik und der Kontrolle des elektronischen Energietransfers in multichromophoren Modellsystemen durchgeführt. Als Untersuchungsmethoden wurden hauptsächlich die konfokale Einzelmolekülspektroskopie und die Quantenchemie eingesetzt. Der Aufbau des Einzelmolekülmikroskops wurde bezüglich der Anregungs- und Detektionskomponenten variiert, um die unterschiedlichen Experimente durchzuführen. Die quantenchemischen Rechnungen wurden auf Dichtefunktional- und Coupled-Cluster-Niveau durchgeführt. Die aus den Rechnungen erhaltenen zusätzlichen Informationen über experimentell zum Teil schwer zugängliche Eigenschaften der Farbstoffe unterstützten die Interpretation der experimentellen Befunde. rnIn früheren Untersuchungen der AG Basché wurden die Energietransfer-Raten von Donor-Akzeptor-Systemen gemessen, die erhebliche Abweichungen von nach der Förster-Theorie berechneten Raten zeigten. Daher war ein Ziel der vorliegenden Arbeit, diese Abweichungen zu erklären. Zu diesem Zweck wurde die Geometrie der Diaden experimentell untersucht, sowie die elektronische Kopplung zwischen den Chromophoren quantenchemisch berechnet. Die relative Orientierung der Chromophore in den Diaden wurde in einem Einzelmolekül-Experiment mit rotierender Anregungspolarisation abgefragt. Die erhaltenen Winkelverteilungen konnten schließlich eindeutig auf die Flexibilität der die Chromophore verbrückenden Oligophenyl-Einheiten zurückgeführt werden. Die Unterschiede der gemessenen Energietransfer-Raten zu den nach der Förster-Theorie ermittelten Werten konnten jedoch nicht über die molekulare Flexibilität der Systeme erklärt werden. Aufklärung über die Diskrepanzen zur Förster-Theorie ergaben die quantenchemischen Rechnungen. In Rahmen dieser Arbeit wurde zum ersten Mal die Coupled-Cluster-Theorie zur Berechnung der elektronischen Kopplung eingesetzt. Die Betrachtung der isolierten Chromophore reichte aber nicht aus, um die gemessenen Abweichungen von der Förster-Theorie zu erklären. Erst über die Berücksichtigung der molekularen Brücke konnten die gefunden Abweichungen erklärt werden. Die deutliche Verstärkung der elektronischen Kopplung ist auf die Polarisierbarkeit der Brücke zurückzuführen.rnNach diesen Betrachtungen stand die Kontrolle des Energietransfers im Fokus der weiteren Untersuchungen. In den durchgeführten Einzelmolekülexperimenten wurden die Chromophore der Donor-Akzeptor-Systeme selektiv mit zwei Laserpulsen unterschiedlicher Wellenlänge angeregt. Beim gleichzeitigen Anregen beider Chromophore wurde Singulett-Singulett-Annihilation (SSA) induziert, ein Energietransferprozess, bei dem die Anregungsenergie vom vorigen Akzeptor zum vorigen Donor übertragen wird. Da über SSA Fluoreszenzphotonen gelöscht wurden, konnte über den Abstand der Laserpulse die Fluoreszenzintensität des einzelnen Moleküls moduliert werden. Konzeptionell verwandte Einzelmolekülexperimente wurden an einem weiteren molekularen System durchgeführt, das aus einem Kern und einer Peripherie bestand. Fluoreszenzauszeiten des Gesamtsystems bei selektiver Anregung des Kerns wurden auf die Population eines Triplett-Zustandes zurückgeführt, der die Fluoreszenz der Peripherie löschte. rnAbschließend wurde der SSA-Prozess zwischen zwei gleichartigen Chromophoren untersucht. Es wurde eine Methode entwickelt, die es zum ersten Mal erlaubte, die SSA-Zeitkonstante individueller Moleküle zu bestimmen. Hierfür wurden die Daten der gemessenen Photonen-Koinzidenzhistogramme mittels eines im Rahmen dieser Arbeit hergeleiteten analytischen Zusammenhangs ausgewertet, der über Monte-Carlo-Simulationen bestätigt wurde.

Structure formation of amphiphilic molecules at the air,water interface and after film transfer

One of the basic concepts of molecular self-assembly is that the morphology of the aggregate is directly related to the structure and interaction of the aggregating molecules. This is not only true for the aggregation in bulk solution, but also for the formation of Langmuir films at the air/water interface. Thus, molecules at the interface do not necessarily form flat monomolecular films but can also aggregate into multilayers or surface micelles. In this context, various novel synthetic molecules were investigated in terms of their morphology at the air/water interface and in transferred films. rnFirst, the self-assembly of semifluorinated alkanes and their molecular orientation at the air/water interface and in transferred films was studied employing scanning force microscopy (SFM) and Kelvin potential force microscopy. Here it was found, that the investigated semifluorinated alkanes aggregate to form circular surface micelles with a diameter of 30 nm, which are constituted of smaller muffin-shaped subunits with a diameter of 10 nm. A further result is that the introduction of an aromatic core into the molecular structure leads to the formation of elongated surface micelles and thus implements a directionality to the self-assembly. rnSecond, the self-assembly of two different amphiphilic hybrid materials containing a short single stranded desoxyribonucleic acid (DNA) sequence was investigated at the air/water interface. The first molecule was a single stranded DNA (11mer) molecule with two hydrophobically modified 5-(dodec-1-ynyl)uracil nucleobases at the terminal 5'-end of the oligonucleotide sequence. Isotherm measurements revealed the formation of semi-stable films at the air/water interface. SFM imaging of films transferred via Langmuir-Blodgett technique supported this finding and indicated mono-, bi- and multilayer formation, according to the surface pressure applied upon transfer. Within these films, the hydrophilic DNA sequence was oriented towards air covering 95% of the substrate.rnSimilar results were obtained with a second type of amphiphile, a DNA block copolymer. Furthermore, the potential to perform molecular recognition experiments at the air/water interface with these DNA hybrid materials was evaluated.rnThird, polyglycerol ester molecules (PGE), which are known to form very stable foams, were studies. Aim was to elucidate the molecular structure of PGE molecules at the air/water interface in order to comprehend the foam stabilization mechanism. Several model systems mimicking the air/water interface of a PGE foam and methods for a noninvasive transfer were tested and characterized by SFM. It could be shown, that PGE stabilizes the air/water interface of a foam bubble by formation of multiple surfactant layers. Additionally, a new transfer technique, the bubble film transfer was established and characterized by high speed camera imaging.The results demonstrate the diversity of structures, which can be formed by amphiphilic molecules at the air/water interface and after film transfer, as well as the impact of the chemical structure on the aggregate morphology.

Microemulsion: prediction of the phase diagram with a modified Helfrich free energy

Microemulsions are thermodynamically stable, macroscopically homogeneous but microscopically heterogeneous, mixtures of water and oil stabilised by surfactant molecules. They have unique properties like ultralow interfacial tension, large interfacial area and the ability to solubilise other immiscible liquids. Depending on the temperature and concentration, non-ionic surfactants self assemble to micelles, flat lamellar, hexagonal and sponge like bicontinuous morphologies. Microemulsions have three different macroscopic phases (a) 1phase- microemulsion (isotropic), (b) 2phase-microemulsion coexisting with either expelled water or oil and (c) 3phase- microemulsion coexisting with expelled water and oil.rnrnOne of the most important fundamental questions in this field is the relation between the properties of the surfactant monolayer at water-oil interface and those of microemulsion. This monolayer forms an extended interface whose local curvature determines the structure of the microemulsion. The main part of my thesis deals with the quantitative measurements of the temperature induced phase transitions of water-oil-nonionic microemulsions and their interpretation using the temperature dependent spontaneous curvature [c0(T)] of the surfactant monolayer. In a 1phase- region, conservation of the components determines the droplet (domain) size (R) whereas in 2phase-region, it is determined by the temperature dependence of c0(T). The Helfrich bending free energy density includes the dependence of the droplet size on c0(T) as

Nanoparticles for efficient uptake by human dendritic cells and T lymphocytes to be used in adoptive immunotherapy

Dendritic cells (DCs) are the most potent cell type for capture, processing, and presentation of antigens. They are able to activate naïve T cells as well as to initiate memory T-cell immune responses. T lymphocytes are key elements in eliciting cellular immunity against bacteria and viruses as well as in the generation of anti-tumor and anti-leukemia immune responses. Because of their central position in the immunological network, specific manipulations of these cell types provide promising possibilities for novel immunotherapies. Nanoparticles (NP) that have just recently been investigated for use as carriers of drugs or imaging agents, are well suited for therapeutic applications in vitro and also in vivo since they can be addressed to cells with a high target specificity upon surface functionalization. As a first prerequisite, an efficient in vitro labeling of cells with NP has to be established. In this work we developed protocols allowing an effective loading of human monocyte-derived DCs and primary antigen-specific T cells with newly designed NP without affecting biological cell functions. Polystyrene NP that have been synthesized by the miniemulsion technique contained perylenmonoimide (PMI) as a fluorochrome, allowing the rapid determination of intracellular uptake by flow cytometry. To confirm intracellular localization, NP-loaded cells were analyzed by confocal laser scanning microscopy (cLSM) and transmission electron microscopy (TEM). Functional analyses of NP-loaded cells were performed by IFN-γ ELISPOT, 51Chromium-release, and 3H-thymidine proliferation assays. In the first part of this study, we observed strong labeling of DCs with amino-functionalized NP. Even after 8 days 95% of DCs had retained nanoparticles with a median fluorescence intensity of 67% compared to day 1. NP loading did not influence expression of cell surface molecules that are specific for mature DCs (mDCs) nor did it influence the immunostimulatory capacity of mDCs. This procedure did also not impair the capability of DCs for uptake, processing and presentation of viral antigens that has not been shown before for NP in DCs. In the second part of this work, the protocol was adapted to the very different conditions with T lymphocytes. We used leukemia-, tumor-, and allo-human leukocyte antigen (HLA) reactive CD8+ or CD4+ T cells as model systems. Our data showed that amino-functionalized NP were taken up very efficiently also by T lymphocytes, which usually had a lower capacity for NP incorporation compared to other cell types. In contrast to DCs, T cells released 70-90% of incorporated NP during the first 24 h, which points to the need to escape from intracellular uptake pathways before export to the outside can occur. Preliminary data with biodegradable nanocapsules (NC) revealed that encapsulated cargo molecules could, in principle, escape from the endolysosomal compartment after loading into T lymphocytes. T cell function was not influenced by NP load at low to intermediate concentrations of 25 to 150 μg/mL. Overall, our data suggest that NP and NC are promising tools for the delivery of drugs, antigens, and other molecules into DCs and T lymphocytes.

Optische Mikroskopie an elektrostatisch stabilisierten kolloidalen Suspensionen unter dem Einfluss geladener Wände - ausgewählte Gleichgewichts- und Nichtgleichgewichtsphänomene

Das Verhalten kolloidaler Suspensionen unter räumlich beschränkter Geometrie ist von großer Bedeutung für die statistische Physik wie auch für die Technologie. Von speziellem Interesse sind Modellsysteme geladener kolloidaler Sphären aufgrund ihrer langreichweitigen und veränderbaren Wechselwirkungen. In dieser Arbeit wurde ein experimenteller Aufbau für die optische mikroskopische Untersuchung solcher, zwischen ebenen Wänden beschränkter Systeme realisiert. Anhand von Piezo-Aktuatoren kann die Zellgeometrie flexibel und präzise eingestellt werden. Unter Verwendung eines Pumpkreislaufs mit einer Ionentauschersäule können kolloidale Suspensionen unter stark entsalzten Bedingungen effizient präpariert werden. Anhand dieses Aufbaus wurde zunächst das Gleichgewichtsphasendiagramm monodisperser geladener kolloidaler Sphären zwischen parallelen Wänden untersucht. Es wurden quantitative Resultate für den Grenzfall starker Entsalzung erzielt, welche mit theoretischen Grundzustandsvorhersagen übereinstimmen. In Doppellagensystemen konnte die Existenz transienter kolloidaler Moiré-Rotationsmuster demonstriert werden, welche besondere zweidimensionale Kristallstrukturen mit komplexer Basis darstellen. Es wurden ferner Nichtgleichgewichtsphänomene untersucht, welche durch Gradienten von lokal freigesetzten Elektrolyten verursacht werden. Durch hauptsächlich diffusioosmotischen Partikeltransport entlang einer einzelnen geladenen Substratoberfläche konnten die Bildung kristalliner Ordnung sowie komplexe, selbstorganisierte Bewegungszustände in einem verdünnten kolloidalen Monolagenfluid bei kleinen Reynolds-Zahlen induziert werden. Interessante Perspektiven für die zukünftige Verwendung des experimentellen Aufbaus ergeben sich aus Beobachtungen verschiedener weiterer Phänomene.