Carbon sources for Power-to-Gas applications in the Finnish energy system

This thesis is done as a part of the NEOCARBON project. The aim of NEOCARBON project is to study a fully renewable energy system utilizing Power-to-Gas or Power-to-Liquid technology for energy storage. Power-to-Gas consists of two main operations: Hydrogen production via electrolysis and methane production via methanation. Methanation requires carbon dioxide and hydrogen as a raw material. This thesis studies the potential carbon dioxide sources within Finland. The different sources are ranked using the cost and energy penalty of the carbon capture, carbon biogenity and compatibility with Power-to-Gas. It can be concluded that in Finland there exists enough CO2 point sources to provide national PtG system with sufficient amounts of carbon. Pulp and paper industry is single largest producer of biogenic CO2 in Finland. It is possible to obtain single unit capable of grid balancing operations and energy transformations via Power-to-Gas and Gas-to-Power by coupling biogas plants with biomethanation and CHP units.

Adaptive MCMC methods with applications in environmental and geophysical models

This work presents new, efficient Markov chain Monte Carlo (MCMC) simulation methods for statistical analysis in various modelling applications. When using MCMC methods, the model is simulated repeatedly to explore the probability distribution describing the uncertainties in model parameters and predictions. In adaptive MCMC methods based on the Metropolis-Hastings algorithm, the proposal distribution needed by the algorithm learns from the target distribution as the simulation proceeds. Adaptive MCMC methods have been subject of intensive research lately, as they open a way for essentially easier use of the methodology. The lack of user-friendly computer programs has been a main obstacle for wider acceptance of the methods. This work provides two new adaptive MCMC methods: DRAM and AARJ. The DRAM method has been built especially to work in high dimensional and non-linear problems. The AARJ method is an extension to DRAM for model selection problems, where the mathematical formulation of the model is uncertain and we want simultaneously to fit several different models to the same observations. The methods were developed while keeping in mind the needs of modelling applications typical in environmental sciences. The development work has been pursued while working with several application projects. The applications presented in this work are: a winter time oxygen concentration model for Lake Tuusulanjärvi and adaptive control of the aerator; a nutrition model for Lake Pyhäjärvi and lake management planning; validation of the algorithms of the GOMOS ozone remote sensing instrument on board the Envisat satellite of European Space Agency and the study of the effects of aerosol model selection on the GOMOS algorithm.

Inversion and assimilation methods with applications in geophysical remote sensing

Stratospheric ozone can be measured accurately using a limb scatter remote sensing technique at the UV-visible spectral region of solar light. The advantages of this technique includes a good vertical resolution and a good daytime coverage of the measurements. In addition to ozone, UV-visible limb scatter measurements contain information about NO2, NO3, OClO, BrO and aerosols. There are currently several satellite instruments continuously scanning the atmosphere and measuring the UVvisible region of the spectrum, e.g., the Optical Spectrograph and Infrared Imager System (OSIRIS) launched on the Odin satellite in February 2001, and the Scanning Imaging Absorption SpectroMeter for Atmospheric CartograpHY (SCIAMACHY) launched on Envisat in March 2002. Envisat also carries the Global Ozone Monitoring by Occultation of Stars (GOMOS) instrument, which also measures limb-scattered sunlight under bright limb occultation conditions. These conditions occur during daytime occultation measurements. The global coverage of the satellite measurements is far better than any other ozone measurement technique, but still the measurements are sparse in the spatial domain. Measurements are also repeated relatively rarely over a certain area, and the composition of the Earth’s atmosphere changes dynamically. Assimilation methods are therefore needed in order to combine the information of the measurements with the atmospheric model. In recent years, the focus of assimilation algorithm research has turned towards filtering methods. The traditional Extended Kalman filter (EKF) method takes into account not only the uncertainty of the measurements, but also the uncertainty of the evolution model of the system. However, the computational cost of full blown EKF increases rapidly as the number of the model parameters increases. Therefore the EKF method cannot be applied directly to the stratospheric ozone assimilation problem. The work in this thesis is devoted to the development of inversion methods for satellite instruments and the development of assimilation methods used with atmospheric models.

Structural and operational optimisation : applications in energy systems

In this work mathematical programming models for structural and operational optimisation of energy systems are developed and applied to a selection of energy technology problems. The studied cases are taken from industrial processes and from large regional energy distribution systems. The models are based on Mixed Integer Linear Programming (MILP), Mixed Integer Non-Linear Programming (MINLP) and on a hybrid approach of a combination of Non-Linear Programming (NLP) and Genetic Algorithms (GA). The optimisation of the structure and operation of energy systems in urban regions is treated in the work. Firstly, distributed energy systems (DES) with different energy conversion units and annual variations of consumer heating and electricity demands are considered. Secondly, district cooling systems (DCS) with cooling demands for a large number of consumers are studied, with respect to a long term planning perspective regarding to given predictions of the consumer cooling demand development in a region. The work comprises also the development of applications for heat recovery systems (HRS), where paper machine dryer section HRS is taken as an illustrative example. The heat sources in these systems are moist air streams. Models are developed for different types of equipment price functions. The approach is based on partitioning of the overall temperature range of the system into a number of temperature intervals in order to take into account the strong nonlinearities due to condensation in the heat recovery exchangers. The influence of parameter variations on the solutions of heat recovery systems is analysed firstly by varying cost factors and secondly by varying process parameters. Point-optimal solutions by a fixed parameter approach are compared to robust solutions with given parameter variation ranges. In the work enhanced utilisation of excess heat in heat recovery systems with impingement drying, electricity generation with low grade excess heat and the use of absorption heat transformers to elevate a stream temperature above the excess heat temperature are also studied.

The biotechnology of lactic acid bacteria with emphasis on applications in food safety and human health

Selostus: Terveyttä ja ruoan turvallisuutta edistävät maitohappobakteerien biotekniset sovellukset

Wireless E-Business Applications in ICT Industry

Sähköisen liiketoiminnan sovelluksia on voitu toistaiseksi käyttää useimmissa tapauksissa vain langallisen yhteyden kautta. Uudet langattomat teknologiat, jotka ovat kehittyneet nopeasti muutaman viimeisen vuoden aikana, mahdollistavat näiden sovellusten käytön ajasta ja paikasta riippumatta. Tämän työn tavoitteena oli tutkia langattomien sähköisen liiketoiminnan sovellusten käyttöä ja hyötyjä tieto- ja viestintäteollisuudessa. Työssä keskitytään tutkimaan tätä tietotekniikan evoluutioaskelta yksittäisen yrityksen kannalta: rajoittuen omassa toiminnassa käytettäviin sovelluksiin. Tutkimus luo viitekehyksen mobiilisuuden evoluutioon, uuden tietotekniikan vaikutuksiin ja hyötyihin sekä tarkemmin langattomiin sähköisen liiketoiminnan sovelluksiin. Tätä viitekehystä käytetään analysoitaessa nykyistä käyttöä tutkimuksen kohteena olevissa yrityksissä. Tutkimuksen johtopäätökset niin nykyisestä käytöstä kuin myös tulevasta ovat syntyneet viitekehyksen, nykyisen käytön, sekä tehtyjen haastattelujen pohjalta.

The Future of Mobile Services and Wireless Applications in the Finnish Healthcare Sector

Työn päätavoitteena oli tutkia mobiilipalveluita ja langattomia sovelluksia Suomen terveydenhuollon sektorilla. Tutkimus havainnollistaa avain-alueita, missä mobiilipalvelut ja langattomat sovellukset voivat antaa lisäarvoa perinteiseen lääketieteen harjoittamiseen, ja selvittää, mitkä ovat tähän kehitykseen liittyvät suurimmat ongelmat ja uhkat sekä tutkimustuloksiin pohjautuvat mahdolliset palvelut ja sovellukset 5-10 vuoden kuluttua. Tutkimus oli luonteeltaan kvalitatiivinen ja tutkimuksen toteuttamiseen valittiin tulevaisuudentutkimus ja erityisesti yksi sen menetelmistä, delfoi-menetelmä. Tutkimuksen aineisto kerättiin kahdelta puolistrukturoidulta haastattelukierrokselta. Työn empiirinen osuus keskittyi kuvailemaan Suomen terveydenhuollon sektoria, siinä meneillään olevia projekteja sekä teknisiä esteitä. Lisäksi pyrittiin vastaamaan tutkimuksen pääkysymykseen. Tutkimustulokset osoittivat, että tärkeät alueet, joihin langaton kommunikaatio tulisi vaikuttamaan merkittävästi, ovat ensiaputoiminta, kroonisten potilaiden etämonitorointi, välineiden kehittäminen langattomaan kommunikaatioon kotihoidon parantamiseksi ja uusien toimintamallien luomiseksi sekä lääketieteellinen yhteistyö jakamalla terveydenhuoltoon liittyvät informaation lähteet. Työn tulosten perusteellavoitiin antaa myös muutamia toimenpide-ehdotuksia jatkotutkimuksia varten.

Operational Reliability Analysis of a Three-Tiered Thin-Client ERP-system in an International Corporate Environment

Internationalization and the following rapid growth have created the need to concentrate the IT systems of many small-to-medium-sized production companies. Enterprise Resource Planning systems are a common solution for such companies. Deployment of these ERP systems consists of many steps, one of which is the implementation of the same shared system at all international subsidiaries. This is also one of the most important steps in the internationalization strategy of the company from the IT point of view. The mechanical process of creating the required connections for the off-shore sites is the easiest and most well-documented step along the way, but the actual value of the system, once operational, is perceived in its operational reliability. The operational reliability of an ERP system is a combination of many factors. These factors vary from hardware- and connectivity-related issues to administrative tasks and communication between decentralized administrative units and sites. To accurately analyze the operational reliability of such system, one must take into consideration the full functionality of the system. This includes not only the mechanical and systematic processes but also the users and their administration. All operational reliability in an international environment relies heavily on hardware and telecommunication adequacy so it is imperative to have resources dimensioned with regard to planned usage. Still with poorly maintained communication/administration schemes no amount of bandwidth or memory will be enough to maintain a productive level of reliability. This thesis work analyzes the implementation of a shared ERP system to an international subsidiary of a Finnish production company. The system is Microsoft Dynamics Ax, currently being introduced to a Slovakian facility, a subsidiary of Peikko Finland Oy. The primary task is to create a feasible base of analysis against which the operational reliability of the system can be evaluated precisely. With a solid analysis the aim is to give recommendations on how future implementations are to be managed.

Development of a social service in a multi-party network

Tämän pro gradu-tutkimuksen tarkoituksena oli tutkia monen toimijan sosiaalipalvelukehittäjäverkoston toimivuutta ja sen toimivuuteen vaikuttavia tekijöitä. Aihetta lähestyttiin erilaisten teoreettisten kokonaisuuksien kautta, joiden avulla saatiin luotua tutkimukselle pohja. Viitekehys tutkimukselle luotiin yhdistäen erilaisia teoreettisia aihealueita verkostoista, verkostojen johtamisesta ja palveluista. Tutkimuksessa korostuu motivaation, yhteisen, tarpeeseen perustuvan tavoitteen, sitoutumisen ja orkestroinnin merkitys verkostotoiminnassa hyvän lopputuloksen aikaansaamiseksi. Tutkimuksen empiirisessä osuudessa tehty kvalitatiivinen case-tutkimus keskittyy tiettyyn verkostoon, joka on Socomin koordinoimana kehittänyt Kaakkois-Suomen alueelle uudenlaista sosiaalipalvelua liittyen henkilökohtaiseen apuun. Verkosto on monen toimijan verkosto, jonka jäsenet edustavat erilaisia tahoja ja organisaatioita. Tutkimuksen perusteella verkosto on toiminut hyvin ja tehokkaasti ja saanut luotua toimivan sosiaalipalvelun. Verkosto tukee kirjallisuuskatsauksessa löydettyjen tekijöiden, kuten verkosto-orkestroinnin, sitoutumisen ja yhteisen päämäärän, vaikutusta verkoston toimintaan ja lopputulokseen.

European luxury brands made in China: the effect of low-cost country manufacturing on brand image and purchase decisions

European luxury brands have an image of manufacturing their products in the same country where the brands originate. However, in the past years many luxury brands have shifted their manufacturing to countries outside Europe. China is now a common manufacturing country for European luxury brands despite the country’s poor image as a manufacturer. Chinese manufacturing is often associated with bad quality, bad labour conditions, mass production, and counterfeits. The image of China does not quite match the image luxury brands enjoy including characteristics such as high end quality, craftsmanship, details, design, or premium price. A negatively perceived country-of-manufacture may have an effect on a brand’s image and consumers’ purchase decisions. This thesis is focused on European luxury brands manufacturing in China, and how this effects the brand image and purchase decisions among luxury consumers. The empirical part of this thesis is based on focus group research, which is a popular method in the field of qualitative research. The main focus group is female luxury consumers in Finland. This main group has been divided into three categories: 1) the university students, 2) the young career women, 3) the experienced luxury consumers. This categorization has been done based on their different stages in luxury consumption. All in all, the empirical research consisted of 11 interviews and 29 participants. The main contribution of this thesis was that there is a difference between the opinions of the younger groups (university students and young career women) and the experienced luxury consumers when discussing the effect of country-of-manufacture on brand image and purchase decisions of luxury brands. The younger participants thought that manufacturing luxury products in China might affect the brand image, but their purchase decisions would not be that much affected by the country-of-origin. The experienced luxury consumers had quite a different view on the country-of-origin of luxury brands – they found it an important decisive factor prior making purchases. The majority of experienced luxury consumers would not buy luxury products made in China, and they would always check where these products are made in.

Russian and Eastern European Dynamic Conditional Correlations in light of the Russian crisis of 2014-2015

This thesis studies the impact of the latest Russian crisis on global markets, and especially Central and Eastern Europe. The results are compared to other shocks and crises over the last twenty years to see how significant they have been. The cointegration process of Central and Eastern European financial markets is also reviewed and updated. Using three separate conditional correlation GARCH models, the latest crisis is not found to have initiated similar surges in conditional correlations to previous crises over the last two decades. Market cointegration for Central and Eastern Europe is found to have stalled somewhat after initial correlation increases post EU accession.

Metal oxides prepared through the nanocasting approach-mechanistic study, surface interactions and applications in separation

Mesoporous metal oxides are nowadays widely used in various technological applications, for instance in catalysis, biomolecular separations and drug delivery. A popular technique used to synthesize mesoporous metal oxides is the nanocasting process. Mesoporous metal oxide replicas are obtained from the impregnation of a porous template with a metal oxide precursor followed by thermal treatment and removal of the template by etching in NaOH or HF solutions. In a similar manner to the traditional casting wherein the product inherits the features of the mold, the metal oxide replicas are supposed to have an inverse structure of the starting porous template. This is however not the case, as broken or deformed particles and other structural defects have all been experienced during nanocasting experiments. Although the nanocasting technique is widely used, not all the processing steps are well understood. Questions over the fidelity of replication and morphology control are yet to be adequately answered. This work therefore attempts to answer some of these questions by elucidating the nanocasting process, pin pointing the crucial steps involved and how to harness this knowledge in making wholesome replicas which are a true replication of the starting templates. The rich surface chemistry of mesoporous metal oxides is an important reason why they are widely used in applications such as catalysis, biomolecular separation, etc. At times the surface is modified or functionalized with organic species for stability or for a particular application. In this work, nanocast metal oxides (TiO2, ZrO2 and SnO2) and SiO2 were modified with amino-containing molecules using four different approaches, namely (a) covalent bonding of 3-aminopropyltriethoxysilane (APTES), (b) adsorption of 2-aminoethyl dihydrogen phosphate (AEDP), (c) surface polymerization of aziridine and (d) adsorption of poly(ethylenimine) (PEI) through electrostatic interactions. Afterwards, the hydrolytic stability of each functionalization was investigated at pH 2 and 10 by zeta potential measurements. The modifications were successful except for the AEDP approach which was unable to produce efficient amino-modification on any of the metal oxides used. The APTES, aziridine and PEI amino-modifications were fairly stable at pH 10 for all the metal oxides tested while only AZ and PEI modified-SnO2 were stable at pH 2 after 40 h. Furthermore, the functionalized metal oxides (SiO2, Mn2O3, ZrO2 and SnO2) were packed into columns for capillary liquid chromatography (CLC) and capillary electrochromatography (CEC). Among the functionalized metal oxides, aziridinefunctionalized SiO2, (SiO2-AZ) showed good chemical stability, and was the most useful packing material in both CLC and CEC. Lastly, nanocast metal oxides were synthesized for phosphopeptide enrichment which is a technique used to enrich phosphorylated proteins in biological samples prior to mass spectrometry analysis. By using the nanocasting technique to prepare the metal oxides, the surface area was controlled within a range of 42-75 m2/g thereby enabling an objective comparison of the metal oxides. The binding characteristics of these metal oxides were compared by using samples with different levels of complexity such as synthetic peptides and cell lysates. The results show that nanocast TiO2, ZrO2, Fe2O3 and In2O3 have comparable binding characteristics. Furthermore, In2O3 which is a novel material in phosphopeptide enrichment applications performed comparably with standard TiO2 which is the benchmark for such phosphopeptide enrichment procedures. The performance of the metal oxides was explained by ranking the metal oxides according to their isoelectric points and acidity. Overall, the clarification of the nanocasting process provided in this work will aid the synthesis of metal oxides with true fidelity of replication. Also, the different applications of the metal oxides based on their surface interactions and binding characteristics show the versatility of metal oxide materials. Some of these results can form the basis from which further applications and protocols can be developed.

Deviations of Governance In IT Multi-Sourcing: A Case Study

IT outsourcing (ITO) refers to the shift of IT/IS activities from internal to external of an organization. In prior research, the governance of ITO is recognized with persistent strategic importance for practice, because it is tightly related to ITO success. Under the rapid transformation of global market, the evolving practice of ITO requires updated knowledge on effective governance. However, research on ITO governance is still under developed due to the lack of integrated theoretical frameworks and the variety of empirical settings besides dyadic client-vendor relationships. Especially, as multi-sourcing has become an increasingly common practice in ITO, its new governance challenges must be attended by both ITO researchers and practitioners. To address this research gap, this study aims to understand multi-sourcing governance with an integrated theoretical framework incorporating both governance structure and governance mechanisms. The focus is on the emerging deviations among formal, perceived and practiced governance. With an interpretive perspective, a single case study is conducted with mixed methods of Social Network Analysis (SNA) and qualitative inquiries. The empirical setting embraces one client firm and its two IT suppliers for IT infrastructure services. The empirical material is analyzed at three levels: within one supplier firm, between the client and one supplier, and among all three firms. Empirical evidences, at all levels, illustrate various deviations in governance mechanisms, with which emerging governance structures are shaped. This dissertation contributes to the understanding of ITO governance in three domains: the governance of ITO in general, the governance of multi-sourcing in particular, and research methodology. For ITO governance in general, this study has identified two research strands of governance structure and governance mechanisms, and integrated both concepts under a unified framework. The composition of four research papers contributes to multi-sourcing research by illustrating the benefits of zooming in and out across the multilateral relationships with different aspects and scopes. Methodologically, the viability and benefit of mixed-method is illustrated and confirmed for both researchers and practitioners.

Knowledge creation and transfer in an iterative project environment

This Master’s Thesis examines knowledge creation and transfer processes in an iterative project environment. The aim is to understand how knowledge is created and transferred during an actual iterative implementation project which takes place in International Business Machines (IBM). The second aim is to create and develop new working methods that support more effective knowledge creation and transfer for future iterative implementation projects. The research methodology in this thesis is qualitative. Using focus group interviews as a research method provides qualitative information and introduces the experiences of the individuals participating in the project. This study found that the following factors affect knowledge creation and transfer in an iterative, multinational, and multi-organizational implementation project: shared vision and common goal, trust, open communication, social capital, and network density. All of these received both theoretical and empirical support. As for future projects, strengthening these factors was found to be the key for more effective knowledge creation and transfer.