Impact of Investment Strategies on Performance in Pulp and Paper Industry

The main objective of this study was to examine, what kind of investment strategies the leading European and North American pulp and paper industry companies (PPI) used in 1991-2003, and how the selected strategies affected their performance. The investment strategies were categorised in three classes including mergers and acquisitions, investments in new capacity and investments in existing capacity. The results showed that mergers and acquisitions represented the largest share of total investments in 1991-2003 followed by investments in existing capacity. PPI companies changed investment strategies over time by increasing the share of mergers and acquisitions, which decreased investments in new capacity especially among North American companies. According to the results, good asset quality and investments in new and existing capacity provided better profitability than often expensive acquisitions. Also the capacity decreases had a positive impact on profitability. Average asset quality and profitability were higher among European companies. The study concluded that in the long term the available value creating investment opportunities should limit capital expenditure levels, not the relation of capital expenditure to depreciation.

Challenges in Supplier-Buyer Relationships in Electronics Industry

This thesis examines the supplier-buyer relationships in the Finnish electronics industry. The aim of the study was to increase understanding on the challenges that suppliers face in their relationship with the buyer. The research was conducted using qualitative methods because they allow more perspective for the research problem than quantitative methods would have. Choosing qualitative method also affected the selection of a research technique. Analysis of secondary data from written documents was chosen to give more perspective to a broad problem. The main findings of this research are that the relationships between supplier and buyer in electronics industry are challenging because supplier must understand and face three types of challenges. The challenges are: understanding the environment, choosing and implementing correct strategy and managing relationships. For the supplier it is important to understand the environment so it can adjust own strategy to fit to the environment. The supplier should also be careful not to be too dependent on the buyer.

Fiber flows in global paper and pulp industry. A panel data approach.

The purpose of this thesis is to study factors that explain the bilateral fiber trade flows. This is done by analyzing bilateral trade flows during 1990-2006. It will be studied also, whether there are differences between fiber types. This thesis uses a gravity model approach to study the trade flows. Gravity model is mostly used to study the aggregate data between trading countries. In this thesis the gravity model is applied to single fibers. This model is then applied to panel data set. Results from the regression show clearly that there are benefits in studying different fibers in separate. The effects differ considerably from each other. Furthermore, this thesis speaks for the existence of Linder’s effect in certain fiber types.

Growth Strategies in Pulp and Paper Industry: An Empirical Investigation on Profitability Effects

This study investigates whether there are differences in profitability of PPI companies based on the growth strategy they have chosen to follow. It is examined whether those companies following organic growth strategy are more profitable than those companies following acquisitive growth strategy. It is also investigated are ones larger than the others, or are ones growing faster than the others. Also, the factors affecting the profitability of acquisitive companies are further examined. The results showed that there actually are differences between the two groups. Organically grown companies were found to be more profitable, smaller and growing slower than acquisitive companies. When it comes to examining only acquisitive companies there could be found factors that better or worsen the profitability of companies. For example targets that the company has bought in developing markets were making them more profitable.

Clustering and international competitiveness of information technology industry in the Saint Petersburg area

The main objective of this study is to assess the potential of the information technology industry in the Saint Petersburg area to become one of the new key industries in the Russian economy. To achieve this objective, the study analyzes especially the international competitiveness of the industry and the conditions for clustering. Russia is currently heavily dependent on its natural resources, which are the main source of its recent economic growth. In order to achieve good long-term economic performance, Russia needs diversification in its well-performing industries in addition to the ones operating in the field of natural resources. The Russian government has acknowledged this and started special initiatives to promote such other industries as information technology and nanotechnology. An interesting industry that is basically less than 20 years old and fast growing in Russia, is information technology. Information technology activities and markets are mainly concentrated in Russia’s two biggest cities, Moscow and Saint Petersburg, and areas around them. The information technology industry in the Saint Petersburg area, although smaller than Moscow, is especially dynamic and is gaining increasing foreign company presence. However, the industry is not yet internationally competitive as it lacks substantial and sustainable competitive advantages. The industry is also merely a potential global information technology cluster, as it lacks the competitive edge and a wide supplier and manufacturing base and other related parts of the whole information technology value system. Alone, the industry will not become a key industry in Russia, but it will, on the other hand, have an important supporting role for the development of other industries. The information technology market in the Saint Petersburg area is already large and if more tightly integrated to Moscow, they will together form a huge and still growing market sufficient for most companies operating in Russia currently and in the future. Therefore, the potential of information technology inside Russia is immense.

Design of flywheel generator for a diesel hybrid working machine

The aim of this work is to design a flywheel generator for a diesel hybrid working machine. In this work we perform detailed design of a generator. Mobile machines are commonly used in industry: road building machines, three harvesting machines, boring machines, trucks and other equipment. These machines work with a hydraulic drive system. This system provides good service property and high technical level. Manufacturers of mobile machines tend to satisfy all requirements of customers and modernized drive system. In this work also a description of the frequency inverter is present. Power electronics system is one of the basic parts for structures perform in the project.

Warranty Practices and Costs in the Industry of Welding Machines Manufacturing

The objective of the master’s thesis is to define the warranty practices and costs in the welding machines manufacturing company and do a proposal for a warranty policy based on the practices and costs. The study include a disquisition of the warranty practices in the subsidiaries and distributor sales. The disquisition of the warranty practices introduces the information relates to warranty period, warranty costs, including repair, spare part and other costs, the practices with the replaced parts, the utilization rate of the eWarranty system and information relates to special arrangements in the warranties. The warranty costs are defined besides the group level also separately per regions and product families. From some product families the disquisition is done per products. In this study is also done a proposal for a warranty policy for the company. The proposal speaks out the length of warranty period, the compensation of the warranty costs, the practices with replaced parts and usage of eWarranty system.

Komposiittirakenteiden soveltamismahdollisuudet pesureissa

Teräksen raaka-ainekustannusten jyrkkä nousu pakottaa prosessiteollisuuden etsimään vaihtoehtoisia rakennemateriaaleja, joiden ominaisuudet ovat vähintään terästä vastaavia. Prosessiteollisuudessa joudutaan käyttämään runsaasti kemikaaleja kestäviä laitteita, jolloin rakennemateriaaliksi sopiva on haponkestävä teräs. Laitteiden kokojen kasvusta seuraa niiden kokonaispainojen kasvu aiheuttaen haasteita niitä kantaville perustuksille. Komposiitti on yksi varteenotettava vaihtoehto haponkestävän teräksen korvaajaksi, sillä komposiitin ominaisuus/painosuhde on terästä parempi. Diplomityön tavoitteena on ollut selvittää Washers & Filters – tuoteperheeseen kuuluvien laitteiden, DD-pesurin (Drum Displacer) ja GF- suotimen (GasFree Filter), rakenteista löytyvien osien mahdollisuutta korvata komposiitilla. Työn pohjaksi on käsitelty komposiittien ominaisuuksia, tyyppejä ja valmistusmenetelmiä sekä perehdytty sellupesureiden toimintaprosessiin. Tältä pohjalta löytyi valintakriteerien avulla rakenteita, joita olisi mahdollista korvata komposiitilla.

Kansallisten immateriaalioikeuksien vaikutus lääkekeksintöihin Suomessa ja Ruotsissa 1980-90-luvulla

Pro gradu- tutkielman tarkoituksena oli tutkia lääkkeiden immateriaalioikeudellisia suojamuotoja Suomen ja Ruotsin osalta. Tutkimuksessa pyrittiin selvittämään lääkkeiden kansallisen patenttisuojan, lisäsuojatodistuksen ja dokumentaatiosuojan vaikutusta lääkekeksintöihin 1980–90-luvun Suomessa ja Ruotsissa. Lääkkeiden lisäsuojatodistuksella tarkoitetaan ainoastaan lääkeaineille tarkoitettua erillistä immateriaalioikeudellista lisäsuojamuotoa, joka pidentää suoja-aikaa enimmillään viidellä vuodella. Dokumentaatiosuojalla tarkoitetaan suojamuotoa, joka suojaa lääkkeiden kehittämisessä aikaan saatuja tutkimus- ja turvallisuustuloksia rinnakkaisvalmistajilta tietyn määritellyn ajan. Suomen ja Ruotsin kansallisessa lainsäädännössä oli tarkasteluajanjaksolla olennaisia eroja. Rinnakkaisongelmana tutkittiin innovaatio- ja patenttipolitiikan merkitystä lääkekeksintöjen määrään ja laatuun. Tutkimuskysymyksiä lähestyttiin virallislähteiden ja kirjallisuuden lisäksi myös teemahaastatteluin. Haastateltavat olivat alan asiantuntijoita. Tutkimus oli haasteellinen. Oli palkitsevaa saada asiaa koskeva ”hiljainen tieto” kansiin. Suomen ja Ruotsin poliittinen ja lainsäädännöllinen ilmapiiri poikkesivat toisistaan. Suomessa vallitsi protektionistinen ilmapiiri ja se näkyi politiikassa ja vaikutti lainsäädäntöön. Menetelmäpatentista ei haluttu luopua. Menetelmäpatentti on patentti, joka käsittää ainoastaan lääkeaineen valmistusmenetelmän, eikä lopputuotetta. Suomessa sallittiin lääkeaineiden tuotepatentti vasta 1995. Toisin oli Ruotsissa; siellä poliittinen ilmapiiri ja valtion sekä lääketeollisuuden näkemykset johtivat kehitystä niin, että tuotepatenttikielto poistettiin huomattavasti aiemmin kuin Suomessa. Ruotsi oli kaukonäköisempi myös muiden suojamuotojen kohdalla. Lopputuloksena tästä seurasi se, että Ruotsin lääketeollisuus on menestynyt huomattavasti paremmin kuin Suomen. Lääkekeksintöjä tehtiin enemmän. Ruotsin lääkekeksinnöistä suuri osa oli uusia molekyylejä; Suomen vastaava osuus oli selvästi pienempi. Myös Ruotsin lääkevienti oli ja on huomattavasti suurempaa kuin Suomen.

Market Opportunities for Paper Industry in Radio Frequency Identification

The paper industry has been experiencing remarkable structural changes since paper demand growth has ceased and some markets are declining. One reason behind the declined demand is the Internet, which has partially substituted the newspaper as a source of information. Paper products alone can no longer provide livelihood, and the paper industry has to find new business areas. In this research, we studied radio frequency identification (RFID), and the market opportunities it could provide for paper industry. The research combined a quantitative industry analysis and qualitative interviews. RFID is a growing industry in the beginning of its life cycle, in which value chains and technologies still evolve significantly. The industry is going to concentrate on the future, and in the long term RFID-identifiers will probably be printed on paper substrate or directly onto products. Paper industry has the chance to enter the RFID industry, but it has to obtain the required competences, for example through acquisitions. The business potential RFID offers to paper industry is inadequate, and while reviewing new strategic options, the paper industry must consider more options, for example the entire printed intelligence.

Managing Customer Retention in Health and Fitness Club Industry

The objective of this study is to resolve how customer retention is managed in Finnish health and fitness clubs, and how is this comparable with the theoretical aspects of customer retention. It is also discussed how the process leading to customer retention is handled, and what the essential elements of customer retention and loyalty are specifically in the health and fitness club industry. In addition, it is discussed to what extent do health and fitness club companies implement the elements of customer retention in their businesses. Finally, there is discussion about the relationship and priority between the behavioral and attitudinal methods of creating retention in the companies. The data was collected by interviewing the management of six health and fitness clubs from different geographical regions in Finland. Results indicated that the most important constructs concerning customer retention were switching barriers, pricing strategy, competitive aspect, corporate image, service quality, employee retention, and customer satisfaction. In addition, the implementation of customer retention was found to vary between different sized companies and companies from different geographical locations. Moreover, it was discovered that the companies put more effort in constructs that are considered to create customer loyalty instead of retention.

Utilisation of biomass for energy production in the North-West Russian forest industry

Traditionally, fossil fuels have always been the major sources of the modern energy production. However prices on these energy sources have been constantly increasing. The utilization of local biomass resources for energy production can substitute significant part of the required energy demand in different energy sectors. The introduction of the biomass usage can easily be started in the forest industry first as it possesses biomass in a large volume. The forest industry energy sector has the highest potential for the fast bioenergy development in the North-West Russia. Therefore, the question concerning rational and effective forest resources use is important today as well as the utilization of the forestry by-products. This work describes and analyzes the opportunities of utilising biomass, mainly, in the form of the wood by-products, for energy production processes in general, as well as for the northwest Russian forest industry conditions. The study also covers basic forest industry processes and technologies, so, the reader can get familiar with the information about the specific character of the biomass utilization. The work gives a comprehensive view on the northwest forest industry situation from the biomass utilisation point of view. By presenting existing large-scale sawmills and pulp and paper mills the work provides information for the evaluation of the future development of CHP investments in the northwest Russian forest industry.

Managerial Careers in the IT Industry: Women in China and in Finland

This research focuses on the career experiences of women managers in the IT industry in China and Finland, two countries with different cultures, policies, size of population, and social and economic structures regarding work-life support and equal opportunities. The object of this research is to present a cross-cultural comparison of women’s career experiences and how women themselves understand and account for their careers. The study explores how the macro and the micro levels of cultural and social processes become manifested in the lives of individual women. The main argument in this thesis is that culture plays a crucial role in making sense of women’s career experiences, although its role should be understood through its interrelationship with other social processes, e.g., institutional relations, social policies, industrial structures and organizations, as well as globalization. The interrelationship of a series of cultural and social processes affects individuals’ attitudes to, and arrangement and organization of, their work and family lives. This thesis consists of two parts. The first part introduces the research topic and discusses the overall results. The second part comprises five research papers. The main research question of the study is: How do cultural and social processes affect the experiences of women managers? Quantitative and qualitative research methods, which include in-depth interviews, Q-methodology, interpretive analysis, and questionnaires, are used in the study. The main theoretical background is culturally sensitive career theory and the theory of individual differences. The results of this study are viewed through a feminist lens. The research methodology applied allows new explorations on how demographic factors, work experiences, lifestyle issues, and organizational cultures can jointly affect women’s managerial careers. The sample group used in the research is 42 women managers working in IT companies in China (21) and Finland (21). The results of the study illustrate the impact of history, tradition, culture, institutional relations, social politics, industry and organizations, and globalization on the careers of women managers. It is claimed that the role of culture – cultural norms within nations and organizations – is of great importance in the relationship of gender and work. Women’s managerial careers are affected by multiple factors (personal, social and cultural) reflecting national and inter-individual differences. The results of the study contribute to research on careers, adding particularly to the literature on gender, work and culture, and offering a complex and holistic perspective for a richer understanding of pluralism and global diversity. The results of the study indicate how old and new career perspectives are evidenced in women managers in the IT industry. The research further contributes to an understanding of women’s managerial careers from a cross-culture perspective. In addition, the study contributes to the literature on culture and extends understanding of Hofstede’s work. Further, most traditional career theories do not perceive the importance of culture in determining an individual’s career experience and this study richens understanding of women managers’ careers and has considerable implications for international human resource management. The results of this study emphasize the need, when discussing women managers’ careers, to understand the ways by which gendering is produced rather than merely examining gender differences. It is argued that the meaning of self-knowledge is critical. Further, the environment where the careers under study develop differs greatly; China and Finland are very different – culturally, historically and socially. The findings of this study should, therefore, be understood as a holistic, specific, and contextually-bound.