Pk-yritysten rahoituspalveluiden kehittäminen Varkauden talousalueella

Tässä tutkimuksessa selvitettiin Varkauden talousalueen pk-yritysten rahoituspalveluiden kehitystarpeita. Kuvailevaa tutkimusta käyttämällä selvitettiin mitä ongelmakohtia yritykset näkevät rahaliikenteessään, miten rahoitusrakennetta suunnitellaan ja minkälaisia tuotteita yrityksillä on käytössään. Mittareina tutkimuksessa käytettiin mm. kasvutavoitetta, pääomarakennetta ja tuottovaatimusten muodostamista. Tavoitteena oli tutkia mitkä tekijät vaikuttavat sijoituspäätöksentekoon ja mitä tekijöitä arvostetaan pankista saadussa palvelussa. Tutkimukseen valittiin Varkauden talousalueen suurimmat ja parhaan luottoluokituksen omaavat yritykset. Aineisto kerättiin luomalla sähköinen kyselylomake, joka lähetettiin 48 yritykseen tammikuussa 2009. Tutkimustulosten mukaan yritykset näkivät suurimmat kehitystarpeet sähköisessä taloushallinnossa, eri investointirahoitusvaihtoehdoissa ja julkisten sekä yksityisten rahoittajien yhteistyössä. Parempaa rahoitusneuvontaa kaivattiin investointirahoitukseen ja yrityskauppoihin liittyen. Suurimmalla osalla yrityksistä oli selkeät kasvutavoitteet sekä suunniteltu pääomarakenne. Suurimpia puutteita havaittiin mm. korkosuojaus- ja kassanhallinnan ratkaisuissa. Varainhoidon tuotteista mielenkiintoisimpana nähtiin pääomaturvatut ja kiinteää tuottoa maksavat vaihtoehdot. Sijoituspäätöksiin vaikuttavat paljon pankin luotettavuus sekä toimihenkilön asiantuntemus. Vastaavasti sijoituspäätös voi jäädä tekemättä, mikäli tuote on liian monimutkainen tai prosessi vaatii paljon aikaa ja paneutumista. Pankin palveluissa arvostetaan niin ikään luotettavuutta, helppoa asiointia sekä henkilökohtaista palvelua. Vastaajien koulutustaustalla ei näytä valittujen mittareiden perusteella olevan vaikutusta rahoitusosaamiseen. Alueella rahoitusongelmia kohdanneista yrityksistä lähes kaikki olivat kasvuhakuisia.

Sales and Operations Planning Implementation

The master’s thesis focused on implementing a sales and operations planning process. The main objectives were to create planning methods and tools for the implementation. The ultimate goal of the process, beyond this master’s thesis, is to balance the supply of products with customer demand, with optimized profitability. The theoretical part focused on giving a thorough view on the sales and operations planning process. The basis for a monthly planning cycle was identified. Methods, tools, and metrics for demand forecasting and operations planning were also introduced. Based on the theoretical part, a method for forecasting, a forecast spreadsheet, and a forecast accuracy metric were designed. A spreadsheet tool and methods were also designed for the monthly planning of production volumes, capacity, and inventory. The implementation progress was reviewed for two product families for three months. The sales and operations planning process was able to successfully identify a demand peak for the product families. Suggestions for the future of sales and operations planning were also made.

Production Cycle Optimization: Defining the Market Potential for a New Planning Tool

An optimization tool has been developed to help companies to optimize their production cycles and thus improve their overall supply chain management processes. The application combines the functionality that traditional APS (Advanced Planning System) and ARP (Automatic Replenishment Program) systems provide into one optimization run. A qualitative study was organized to investigate opportunities to expand the product’s market base. Twelve personal interviews were conducted and the results were collected in industry specific production planning analyses. Five process industries were analyzed to identify the product’s suitability to each industry sector and the most important product development areas. Based on the research the paper and the plastic film industries remain the most potential industry sectors at this point. To be successful in other industry sectors some product enhancements would be required, including capabilities to optimize multiple sequential and parallel production cycles, handle sequencing of complex finishing operations and to include master planning capabilities to support overall supply chain optimization. In product sales and marketing processes the key to success is to find and reach the people who are involved directly with the problems that the optimization tool can help to solve.

Planning and ramping up a new SW Testing site

During recent years, mobile phone markets have changed significantly. Asian markets have become vital for the manufacturers with their millions of end users and multiple major mobile network operators. This has resulted in software development as global companies have research and development sites running in multiple locations, including Asia. The reasons behind this are not only in reducing labor costs but also in capitalizing on the local knowledge and knowhow. A ramp-up site has multiple effects in the software development and software release activities. This thesis focuses on representing the importance of software testing as part of software development process and highlighting issues that need to be considered during ramp-up activities. In addition this work tries to emphasize the importance of communication between parties and information gathering prior to setting up the ramp-up site. The output of this thesis was successful software testing site ramp-up within the set time limits. The quality of software testing work was assured and the ramp-up -project requirements were achieved.

Developing a Comprehensive Model for Marketing Planning — Combining the Major Approaches

Mix marketing and relationships marketing are two major approaches that often form a basis for organizational marketing planning. The superiority of these approaches has been debated for long without any rational conclusion. Lately there have been studies indicating that both of the major approaches are many times used side by side in marketing planning. There have been also studies suggesting that even combining the mix marketing and relationship marketing approaches might be possible. The aim of this thesis is to provide knowledge about the usage of mix marketing and relationship marketing approaches in organizations and possibilities in combining the approaches. Also a settlement of strengths, weaknesses and risks of combining is intended to provide. The objectives were met through the literature and a case study research. In the case study, interviews were conducted in order to gain a deeper knowledge about marketing planning in various organizations. Based on this study, the combining of the major marketing approaches will be possible and even recommended when keeping in mind few aspects which might cause some troubles in the combining process.

Mobiilipalvelut koulutusorganisaation liikkuvan työn välineenä

Päijät-Hämeen koulutuskonsernissa käynnistettiin 2008 hanke liikkuvan työn ratkaisuista, johon yhtenä osa-alueena kuului henkilöstön mobiilitarpeiden tarvekartoitus ja erilaisten liikkuvaa työtä tekevien ryhmien tunnistaminen ja luokittelu. Mobiilipalvelujen tarvekartoitus toteutettiin käyttäjälähtöisenä kyselytutkimuksena koko konsernin henkilöstölle. Tämän opinnäytetyön tavoitteena oli selvittää ammattikorkeakoulun opetushenkilöstön mobiilipalvelujen tarve ja sen perusteella tunnistaa ja luokitella erilaiset käyttäjäprofiilit. Tarvekartoitusprojekti sisälsi selvityksen, jossa haluttiin saada selville eri käyttäjäryhmien mobiilaitteiden ja tietoliikenneyhteyksien tarve. Lisäksi haluttiin selvittää, missä vastaajat työskentelevät ja kiinnostus oli erityisesti siihen, miten mobiilia vastaajien työ on tällä hetkellä. Työn tuloksia tullaan hyödyntämään hankesuunnittelussa ja mobiilipalvelujen kilpailutuksessa.

Production planning development in global manufacturing company

Larox Corporation is a provider of full service filtration in solid and liquid separation. Larox develops, designs, manufactures and supplies industrial filters. By Larox’s continuous development principle, a project for more efficient production was started. At the same time production planning was taken under review. Aim for this Master’s thesis was to find software designed for production planning purposes replacement for old Microsoft Excel based method. In this Master’s thesis current way of production planning was thoroughly analyzed and improvement targets were specified and also requirements for new software were assigned. Primary requirements for new software were possibility to production scheduling, planning, follow-up and also for long-time capacity planning and tracking. Also one demand was that new software should have data link to Larox’s current ERP-system. Result of this Master’s thesis was to start using Larox’s ERP-system also for production planning purposes. New mode of operation fulfils all requirements which were placed to new system. By using new method of production planning, production planners can get more easier and reliable data than from current system.

Curriculum innovation in teacher education : exploring conceptions among Tanzanian teacher educators

The focus of the study is to understand curriculum innovation from the perspective of Tanzanian teacher educators. It is argued that the deterioration of quality of education in schools is partly to be attributed to the way in which teachers are educated. Curriculum innovation is considered as an essential strategy for bringing about improvement in teacher education. Therefore, in 2000 a new curriculum was introduced; however, right from the inception the curriculum was criticised by teacher educators. The overall aim of the study is to investigate teacher educators’ conceptions of curriculum innovation. In the theoretical framework the main focus is on discussion about different curriculum approaches for teacher education and innovation. In order to achieve the aim of the study, a phenomenographic approach is employed. This approach is used in order to identify similarities and variation in educators’ conceptions of curriculum innovation. The empirical basis of the study consists of interviews with thirty teacher educators working in eight teachers’ colleges situated in various parts of Tanzania. The findings, in brief, reveal variation in teacher educators’ conceptions of the dominant domains of innovation. Two broad conceptions of teaching with six aspects are identified. Conceptions of educational studies are presented in four broad categories of description with four aspects. Similarly, in methodology subjects two conceptions are described with four aspects. On the integration of subject matter studies and subject methods, two broad conceptions are presented with six aspects. Conceptions of textbook prescription policy are characterised in two broad categories of description with four aspects. With the use of modules two broad conceptions are identified with six aspects. In addition, the study identifies four broad conceptions of future curriculum approaches with eight aspects. Looking across the categories of description, the results indicate that educators cope with innovation individually. Three character types of teacher educators are presented: loyal, creative and critical. Furthermore, four types of phenomena suggesting critical areas about teacher educators’ conceptions of innovation are described: educators’ prior educational background, technical factors, student teachers’ factors and shifting from teaching to learning. On the whole, educators express a number of frame factors in the process of change towards the aim of curriculum innovation. This indicates that the new curriculum (2000) is not implemented as intended by curriculum developers. Constraints to the implementation are presented and discussed in detail. From these findings, two models of educators’ stance towards curriculum innovation are presented and can be used as a framework for planning successful curriculum innovations and analysing practice in teachers’ colleges.

Beyond the obvious : three acts in educational drama

Researching research is not a common theme in educational drama. Nor is the educational drama process from a participant perspective a typical focus of research, at least not if the participants are disabled. Yet this is the theme of this thesis, a drama in three acts. The aim of this thesis is to describe, analyse, and discuss both the ways in which research within educational drama can be carried out and represented, and the experiences of the participants of the educational drama process. The theoretical framework that steers the research process is built up of two pairs of frames, each of them, like Russian nesting dolls, containing further frames. The first frame, relating to the outcomes of conducting research in educational drama, comprises philosophical, representational, and personal theories. As the second question asks what educational drama is, the subject related frame is built up of pedagogical, drama educational, and aesthetic theories. The study in its entirety follows the structure of the researcher’s hermeneutical learning process and takes the form of a journey starting from what is familiar, stretching towards what is new and different, and finally returning back to the beginning with a new view on what was there at the start. The thesis consists of two separate but related studies. The first, a familiar study conducted earlier, Alpha in Act I, was carried out among upper secondary school pupils. In the second, the new and therefore unfamiliar study, Omega in Act III, the participants are adult individuals who are physically and communicatively disabled. In between these two Acts an element of “Verfremdung” where the Alpha study is systematically scrutinized as the purpose is to teach and to manage the reader to think. Meta-discussions on the philosophical issues of the study are conducted throughout the text, parallel to the empirical parts. The outcomes of the first research question show that philosophical, methodical, and representational consistency is crucial for research. While this may sound like stating the obvious, this has nevertheless not always been considered fact, especially not within qualitative research. The outcomes further stress that representational issues are also to be recognized when presenting non-rational aspects of educational drama. By wording the world, through the use of visualising language, the surplus of meanings of educational drama can be, as they are within this study, made visible, sensible, and almost tangible, not only cognitively understandable. The outcomes of the second question point to the different foci of the studies, with Alpha focusing on the rationally retold experiences and Omega focusing on nonrational experiences. The outcomes expose educational drama as a learning process comprising doing, reflecting, and being. The doing aspect communicates the concrete efforts in creating a piece of theatre, while the being aspect relates experiences of being as situated, embodied and sensuous, reciprocal, empowering, aesthetic and artistic, and existential. Reflection is the twine that runs throughout the process and connects both doing and being. In summary, the outcomes could be formulated as “learning from learning how to make theatre”.

Under ytan, vid ytan och ovanför ytan : analys av tanken bakom tre läromedel i slöjd

This thesis is based on the personal experience gained related to the planning and production of three web-based teaching materials for the teaching subject knownas sloyd at the comprehensive school in Finland. After the teaching materials had been produced and published on the Internet at the Finnish textile teachers' website KässäBoxi, the idea for this thesis emanated from the questions: Why do the three teaching materials look the way they do and why do other textile teachers comment that they are different? In earlier sloyd educational research it has been stated that a scientific paradigm affects the individual ideology of a sloyd teacher. The aimfor my doctoral thesis is to continue on the topic. As the area of interest comprises the thought behind three teaching materials in sloyd, the aim of the thesis is to show how teaching and educational ideologies in sloyd appear in the teaching materials at hand. The research approach has parallels to research about another, tangible phenomena, namely the iceberg. In a similar way as an iceberg, a teaching material has a profound base, but the base is not always completely visible to the user of the teaching material. In this thesis I strive to show what there is under the surface, on the surface and above the surface of three teaching materials in sloyd. The research approach is defined as qualitative and phenomenologic-hermeneutic. The analysis results in knowledge about how the producer of a teaching material affects the character of a teaching material by choices concerning for example the form, structure, language and illustrations of the teaching material. The analysis also shows how the producers' individual educational and teaching ideologies within the teaching subject at hand appear by means of traces concerning the view on the pupil and the teacher, and the view on planning and conducting teaching in sloyd. The thesis also results in knowledge about how sloyd educational scientific theories and demands from society, as they are stated in the national core curriculum, appear in the three teaching materials. The application of the sloyd educational scientific theory of individual sloyd activity as a holistic educative system is also widened in the thesis. This thesis contributes to future research on producing teaching materials by information about what aspects a producer of teaching materials needs to consider and how the aspects become visible in the teaching materials. This kind of knowledge is valuable to teacher students in sloyd, to teachers in sloyd who intend to plan and produce teaching materials and to teachers who tutor the planning and production of teaching materials.

Ballistisen simuloinnin liikeidean kehittämismahdollisuudet

Asevaikutusta laukaisusta kohteeseen simuloiva integroitu laskentaketju koostuu sisä-, ulko- ja maaliballistiikan malleista. Ulkoballistiikka kattaa laskentamallit radanlaskennan, sääkorjauksen ja ammusaerodynamiikan alueilla. Graafisella käyttöliittymällä toteutetulla, fysikaalisesti tarkkaan mallinnukseen perustuvalla ja kokonaisuuden kattavalla laskentajärjestelmällä on kasvavaa tarvetta teknisiä ja koulutuksellisia tarkoituksia varten. Erikoisesti, jos laskentaketjuun lisätään räjähdysvaikutuksen mallintaminen, voidaan simuloida asejärjestelmien vaikutusta kohteessa käyttäjien arvostamalla tavalla. Tietointensiiviset ballistiikan laskentamallit ovat välttämättömiä työkaluja teknisen suunnitteluosaamisen kattamiseksi ja kilpailuedun luomiseksi verkostoituneessa yritysympäristössä. Yliopistotutkimuksen tuottamien laskennallisten menetelmien hyötykäyttö yritysten suunnittelujärjestelmissä syventää teknistä osaamista, jolla on myös henkilöstöä motivoiva vaikutus teknisesti vaikeutuvilla markkinoilla. Työssä arvioidaan toimialaa analysoimalla eri käyttötarpeita samoille tietokantoihin tukeutuville laskentamalleille. Tarkastellaan teknisiä perusteita, käyttöympäristöjä ja markkinoita liiketoimintamahdollisuuksien tunnistamiseksi. Työn tuloksena syvennetään näkemystä ydinosaamisista ja visioidaan liikeidean erottumista kilpailijoista, markkinoita ja sen kehittämistä.

Researching Manufacturing Planning and Control system and Master Scheduling in a manufacturing firm.

The objective of this thesis is to research Manufacturing Planning and Control (MPC) system and Master Scheduling (MS) in a manufacturing firm. The study is conducted at Ensto Finland Corporation, which operates on a field of electrical systems and supplies. The paper consists of theoretical and empirical parts. The empirical part is based on weekly operating at Ensto and includes inter-firm material analysis, learning and meetings. Master Scheduling is an important module of an MPC system, since it is beneficial on transforming strategic production plans based on demand forecasting into operational schedules. Furthermore, capacity planning tools can remarkably contribute to production planning: by Rough-Cut Capacity Planning (RCCP) tool, a MS plan can be critically analyzed in terms of available key resources in real manufacturing environment. Currently, there are remarkable inefficiencies when it comes to Ensto’s practices: the system is not able to take into consideration seasonal demand and react on market changes on time; This can cause significant lost sales. However, these inefficiencies could be eliminated through the appropriate utilization of MS and RCCP tools. To utilize MS and RCCP tools in Ensto’s production environment, further testing in real production environment is required. Moreover, data accuracy, appropriate commitment to adapting and learning the new tools, and continuous developing of functions closely related to MS, such as sales forecasting, need to be ensured.

Future revenue models: Transformation from textbooks to digital solutions in the educational publishing industry, Case Sanoma Learning

This study was conducted in order to learn how companies’ revenue models will be transformed due to the digitalisation of its products and processes. Because there is still only a limited number of researches focusing solely on revenue models, and particularly on the revenue model change caused by the changes at the business environment, the topic was initially approached through the business model concept, which organises the different value creating operations and resources at a company in order to create profitable revenue streams. This was used as the base for constructing the theoretical framework for this study, used to collect and analyse the information. The empirical section is based on a qualitative study approach and multiple-case analysis of companies operating in learning materials publishing industry. Their operations are compared with companies operating in other industries, which have undergone comparable transformation, in order to recognise either similarities or contrasts between the cases. The sources of evidence are a literature review to find the essential dimensions researched earlier, and interviews 29 of managers and executives at 17 organisations representing six industries. Based onto the earlier literature and the empirical findings of this study, the change of the revenue model is linked with the change of the other dimen-sions of the business model. When one dimension will be altered, as well the other should be adjusted accordingly. At the case companies the transformation is observed as the utilisation of several revenue models simultaneously and the revenue creation processes becoming more complex.