Näkökohtia tutkimusyhteistyössä tapahtuvasta lisensoinnista

Pro gradu- tutkielman tarkoituksena oli perehtyä erilaisiin yritysten välisessä tutkimusyhteistyössä käytettäviin lisensiointijärjestelyihin. Tutkimuksessa pyrittiin ymmärtämään miten tutkimusyhteistyö on kehittynyt 2000-luvulla ja miten erilaiset tutkimusyhteistyöjärjestelyt vaikuttavat kun yritys pyrkii varmistamaan itselleen kilpailuetua. Tutkimuskysymyksiä lähestyttiin kirjallisuuden lisäksi myös teemahaastatteluin. Haastateltavat olivat alan asiantuntijoita. Yritysten verkostoituminen on lisääntynyt, mutta teknologinen yhteistyö toimialojen sisällä on vähentynyt. Yritysten sisällä keksintöjen pitää yhä enemmän liittyä yrityksen strategiaan ja liiketoimintaan. Tutkimusyhteistyössä on usein ratkaistava kuinka menetellään, kun siinä syntyvään tietoon liittyy tutkimusyhteistyön ulkopuolisia teollisoikeuksia, jotka ovat tutkimuksen ja tulosten hyödyntämisen kannalta tarpeellisia. Tällaisissa tapauksissa lisensointi on hyvä vaihtoehto. Yleisin järjestely tutkimusyhteistyössä on kahden yrityksen välinen yhteistyö. Yrityksissä on kasvavaa kiinnostusta Open Innovation –ajattelun suuntaan.

Simulating the performance of paper machine control

The topic of this thesis is the simulation of a combination of several control and data assimilation methods, meant to be used for controlling the quality of paper in a paper machine. Paper making is a very complex process and the information obtained from the web is sparse. A paper web scanner can only measure a zig zag path on the web. An assimilation method is needed to process estimates for Machine Direction (MD) and Cross Direction (CD) profiles of the web. Quality control is based on these measurements. There is an increasing need for intelligent methods to assist in data assimilation. The target of this thesis is to study how such intelligent assimilation methods are affecting paper web quality. This work is based on a paper web simulator, which has been developed in the TEKES funded MASI NoTes project. The simulator is a valuable tool in comparing different assimilation methods. The thesis contains the comparison of four different assimilation methods. These data assimilation methods are a first order Bayesian model estimator, an ARMA model based on a higher order Bayesian estimator, a Fourier transform based Kalman filter estimator and a simple block estimator. The last one can be considered to be close to current operational methods. From these methods Bayesian, ARMA and Kalman all seem to have advantages over the commercial one. The Kalman and ARMA estimators seems to be best in overall performance.

Country Risk and Market Reactions to Earnings Announcements: Evidence from Finnish Stock Markets

The objective of this thesis is to examine the market reaction around earnings announcements in Finnish stock markets. The aim is to find out whether the extreme market conditions during the financial crisis are reflected in stock prices as a stronger reaction. In addition to this, the purpose is to investigate how extensively Finnish listed companies report the country segmentation of revenues in their interim reports and whether the country risk is having a significant impact on perceived market reaction. The sample covers all companies listed in Helsinki stock exchange at 1.1.2010 and these companies’ interim reports from the first quarter of 2008 to last quarter of 2009. Final sample consists of 81 companies and 630 firm-quarter observations. The data sample has been divided in two parts, of which country risk sample contains 17 companies and 127 observations and comparison sample covers 66 companies and 503 observations. Research methodologies applied in this thesis are event study and cross-sectional regression analysis. Empirical results indicate that the market reaction occurs mainly during the announcement day and is slightly stronger in case of positive earnings surprises than the reactions observed in previous studies. In case of negative earnings surprises no significant differences can be observed. In case of country risk sample and negative earnings surprise market reaction is negative already in advance of the disclosure contrary to comparison sample. In case of positive surprise no differences can be observed. Country risk variable developed during this study seems to explain only minor part of the market reaction.

Developing a Comprehensive Model for Marketing Planning — Combining the Major Approaches

Mix marketing and relationships marketing are two major approaches that often form a basis for organizational marketing planning. The superiority of these approaches has been debated for long without any rational conclusion. Lately there have been studies indicating that both of the major approaches are many times used side by side in marketing planning. There have been also studies suggesting that even combining the mix marketing and relationship marketing approaches might be possible. The aim of this thesis is to provide knowledge about the usage of mix marketing and relationship marketing approaches in organizations and possibilities in combining the approaches. Also a settlement of strengths, weaknesses and risks of combining is intended to provide. The objectives were met through the literature and a case study research. In the case study, interviews were conducted in order to gain a deeper knowledge about marketing planning in various organizations. Based on this study, the combining of the major marketing approaches will be possible and even recommended when keeping in mind few aspects which might cause some troubles in the combining process.

Kalvonpesuprosessit paperiteollisuuden sovelluksissa

Tämän työn tarkoituksena oli löytää tehokas ja taloudellinen pesuaine/pesuaineyhdistelmä kahdelle nanosuodatuskalvolle, joiden läpi on suodatettu paperitehtaan kirkassuodosta ja hiomon kiertovettä. Työssä tutkittiin myös sitä, kestävätkö tutkitut kalvot vetyperoksidia. Työssä havaittiin, että tutkituista kalvoista huokoisempi ei puhdistunut millään tutkituista pesuaineista/pesuaineyhdistelmistä. Tiiviimmän kalvon vesivuo palautui hyvin kahdella tutkituista pesuaineista. Palautuminen oli todennäköisesti seurausta siitä, että pesuaine irrotti lian kalvon pinnasta ja modifioi sen jälkeen kalvon pintaa. Työssä havaittiin myös, että huokoisempi kalvo kestää hyvin toistuvaa vetyperoksidikäsittelyä. Tiiviimpi kalvo puolestaan ei kestä toistuvaa käsittelyä vetyperoksidilla. Vetyperoksidia voidaan kuitenkin käyttää satunnaisesti apuna tiiviimpienkin kalvojen pesussa.

Satelliittipaikannukseen perustuvan reaaliaikaisen jäljitysohjelmiston toteutus

Satelliittipaikannuksen hyödyntäminen eri sovellusaloilla ja siviilikäytössä on kasvanut merkittävästi 2000-luvulla Yhdysvaltojen puolustusministeriön lopetettua GPS-järjestelmän tarkoituksenmukaisen häirinnän. Langattomien datayhteyksien yleistyminen ja nopeuksien kasvaminen on avannut paikkatiedon käyttämiseksi ja hyödyntämiseksi reaaliaikaisesti uusia mahdollisuuksia. Kustannusten kasvaessa on tehokkaasta liikennöinnistä tullut tänä päivänä erittäin tärkeä osa yritysten päivittäisiä toimintoja. Ajoneuvojen hallinta on yksi tapa, jolla pyritään tehostamaan logistisia toimintoja ja vähentämään siitä aiheutuvia kustannuksia. Seuraamalla reaaliaikaisesti ajoneuvojen liikennöintiä voidaan pyrkiä saavuttamaan säästöjä optimoimalla aikatauluja ja reittejä sekä uudelleenohjaamalla ajoneuvoja sijaintien mukaan vähentäen näin kuljettua matkaa ja aikaa. Tässä diplomityössä tavoitteena on tutkia kuinka satelliittipaikannusta, paikkatietoa ja langattomia datayhteyksiä hyödyntämällä voidaan toteuttaa reaaliaikainen jäljitysohjelmisto. Työssä esitellään aluksi paikannustekniikat ja niiden toiminta. Lisäksi tutkitaan kuinka tiedonsiirto voidaan järjestelmässä toteuttaa sekä tarkastellaan järjestelmän kehityksessä huomioitavia tietoturvanäkökohtia. Tutkimuksen pohjalta suunniteltiin ja toteutettiin reaaliaikainen jäljitysohjelmisto kotipalveluyrityksen ajoneuvojen paikannustarpeisiin. Järjestelmän avulla voidaan valvoa ja jäljittää ajoneuvojen sijainteja kartalla reaaliaikaisesti sekä paikantaa tiettyä kohdetta lähimpänä olevat ajoneuvot. Tämä mahdollistaa hälytyksen sattuessa lähimpänä olevan työntekijän lähettämisen asiakaskohteeseen mahdollisimman nopeasti. Järjestelmän avulla käyttäjät voivat lisäksi seurata ajamiaan matkoja ja pitää automaattista ajopäiväkirjaa. Lopuksi työssä arvioidaan toteutetun järjestelmän toimintaa testauksessa saatujen mittaustulosten perusteella.

Pienen ICT-yrityksen kansainvälistymissuunnitelma

Pienen ICT-yrityksen kansainvälistymisoperaatioita suunnitellessa tulee huomioida käytössä olevat resurssit, kansainvälisten toimintojen aloittamiseen kuluva aika sekä sitoutumishalukkuus suhteutettuna riskeihin. Tämän diplomityön lähtökohtana oli määrittää kohdeyritykselle, ZapMeet Companylle, suunnitelma kansainvälistymisen aloittamiseksi. Tutkimuksessa selvitetään pk-yrityksille tyypillisiä kansainvälistymispolkuja, kansainvälistymisen operaatiomuotoja ja kohdemarkkinavalintoja sekä näihin vaikuttavia kriteerejä. Tutkimuksen ensimmäisessä vaiheessa analysoitiin ZapMeet Companyn nykytilanne ja selvitettiin kansainvälistymiseen vaadittavia toimenpiteitä. Tutkimuksen toisessa vaiheessa pureuduttiin kulttuurin ja operaatiomuotojen erityispiirteisiin valikoiduilla markkinoilla. Teoriakehys, markkinoiden erityispiirteet sekä asiantuntijoiden kommentit ja yrityksen resurssit huomioiden diplomityön perusteella muodostettiin suosituksia operaatiomuodon sekä ensimmäisen kohdemarkkinan valintaan. Lisäksi työssä otetaan kantaa vastuun jakoon, tuotteen sopeuttamiseen sekä yhteistyökumppanin valintaan.

Varastopalveluiden kustannuslaskentamallin rakentaminen

Tämän tutkimuksen tavoitteena oli rakentaa kustannuslaskentamalli, jota hyödynne-tään varastopalvelutoimintojen kustannusten tarkastelussa. Tavoitteena oli määrittää ”hintalaput” varaston eri toiminnoille eli selvittää minkä tyyppisiä resursseja toiminnot kuluttavat ja kuinka paljon. Lisäksi mallin tuloksien perusteella pyrittiin kartoittamaan tekijöitä joihin puuttumalla varastopalveluiden kustannustehokkuutta voitaisiin ke-hittää. Rakennettava laskentamalli perustui toimintolaskentaan. Tutkimus jakautui teoria- ja empiiriaosuuteen. Teoriaosuudessa käytiin läpi perinteistä kustannuslaskentaa ja toi-mintolaskentaa sekä verrattiin niitä keskenään. Teoriaosuudessa käytiin läpi myös toimintoperusteiden kustannuslaskentamallin rakentamisen vaiheet sekä perehdyttiin yleisimpiin varastopalvelutoimintoihin ja niiden kustannuslajeihin. Empiiriaosuudessa tutustuttiin Case-yrityksen varastointitoimintoihin, sen kustannuslaskennan nyky-tilaan ja kehityskohteisiin. Lopuksi laskentamallia testattiin yrityksen varastotoimin-toihin. Tutkimuksen tuloksena rakennetun laskentamallin todettiin antavan ymmärrettävää ja analyyttistä tietoa toimintojen ja laskentakohteiden kustannuksista. Laskentamallin tuloksien perusteella päästiin paremmin kiinni kustannusten aiheuttajiin ja tuloksia todettiin voitavan hyödyntää kustannustehokkuuden kehittämisessä. Suurena etuna voitiin täten pitää lisääntynyttä kustannustietoisuutta.

Production planning development in global manufacturing company

Larox Corporation is a provider of full service filtration in solid and liquid separation. Larox develops, designs, manufactures and supplies industrial filters. By Larox’s continuous development principle, a project for more efficient production was started. At the same time production planning was taken under review. Aim for this Master’s thesis was to find software designed for production planning purposes replacement for old Microsoft Excel based method. In this Master’s thesis current way of production planning was thoroughly analyzed and improvement targets were specified and also requirements for new software were assigned. Primary requirements for new software were possibility to production scheduling, planning, follow-up and also for long-time capacity planning and tracking. Also one demand was that new software should have data link to Larox’s current ERP-system. Result of this Master’s thesis was to start using Larox’s ERP-system also for production planning purposes. New mode of operation fulfils all requirements which were placed to new system. By using new method of production planning, production planners can get more easier and reliable data than from current system.

Nursing Ethics Education in Finland from the Perspective of Codes of Ethics

The purpose of this study was to analyze nursing ethics education from the perspective of nurses’ codes of ethics in the basic nursing education programmes in polytechnics in Finland with the following research questions: What is known about nurses’ codes in practice and education, what contents of the codes are taught, what teaching and evaluation methods are used, which demographic variables are associated with the teaching, what is nurse educators’ adequacy of knowledge to teach the codes and nursing students’ knowledge of and ability to apply the codes, and what are participants’ opinions of the need and applicability of the codes, and their importance in nursing ethics education. The aim of the study was to identify strengths and possible problem areas in teaching of the codes and nursing ethics in general. The knowledge gained from this study can be used for developing nursing ethics curricula and teaching of ethics in theory and practice. The data collection was targeted to all polytechnics in Finland providing basic nursing education (i.e. Bachelor of Health Care). The target groups were all nurse educators teaching ethics and all graduating nursing students in the academic year of 2006. A total of 183 educators and 214 students from 24 polytechnics participated. The data was collected using a structured questionnaire with four open-ended questions, designed for this study. The data was analysed by SPSS (14.0) and the open-ended questions by inductive content analysis. Descriptive statistics were used to summarize the data. Inferential statistics were used to estimate the differences between the participant groups. The reliability of the questionnaire was estimated with Cronbach’s coefficient alpha. The literature review revealed that empirical research on the codes was scarce, and minimal in the area of education. Teaching of nurses’ codes themselves and the embedded ethical concepts was extensive, teaching of the functions of the codes and related laws and agreements was moderate, but teaching of the codes of other health care professions was modest. Issues related to the nurse-patient relationship were emphasised. Wider social dimensions of the codes were less emphasized. Educators’ and students’ descriptions of teaching emphasized mainly the same teaching contents, but there were statistically significant differences between the groups in that educators assessed their teaching to be more extensive than what students had perceived it had been. T he use of teaching and evaluation methods was rather narrow and conventional. However, educators’ and students’ descriptions of the used methods differed statistically significantly. Students’ knowledge of the codes and their ability to apply them in practice was assessed as mediocre by educators and by students themselves. Most educators assessed their own knowledge of the codes as adequate to teach the codes, as did most of the students. Educators who regarded their knowledge as adequate taught the codes more extensively than those who assessed their knowledge as less adequate. Also students who assessed their educators’ knowledge as adequate perceived the teaching of the codes to be more extensive. Otherwise educators’ and students’ demographic variables had little association with their descriptions of the teaching. According to the participants, nurses need their own codes, and they are also regarded as applicable in practice. The codes are an important element in nursing ethics education, but their teaching needs development. Further research should focus on the organization of ethics teaching in the curricula, the teaching process, and on the evaluation of the effectiveness of ethics education and on educators’ competence. Also the meaning and functions of the codes at all levels of nursing deserve attention. More versatile use of research methods would be beneficial in gaining new knowledge.

Network Structures and Modularity among Biofuel Heating System Manufacturers

The aim of this thesis was to study network structures and modularity among biofuel heating system manufacturers in the Finnish bioenergy sector by utilizing the perspectives of numerous Finnish bioenergy specialists. The study is qualitative due to the fact that the research material was gathered with semi-structured theme interviews during May and June 2010. The research methodology used in the thesis combines conceptual and action-oriented approach. Networks, value nets, and modularity were studied from different perspectives. Three network and platform strategies were discovered and a general network structure was formed. Moreover, benefits and disadvantages of networks and modularity among biofuel heating system manufacturers were illustrated. The analysis provides a comprehensive perception of the industry. The results of the research were constructed by implementing existing theories into practice. Also future recommendations for the biofuel heating system manufacturers were given. The results can be considered to be beneficial because the number of previous studies about the subject is relatively small. The reliability of the study is eminent because the number of the interviews was inclusive.

Osaamisen siirtäminen prosessikuvauksen avulla. Case: tehtäväpohjainen arkistonmuodostussuunnitelma

The aim of this master’s thesis was to study can an organization use process descriptions for transferring knowledge from an employee to another. The case-organization was South Carelia Joint Authorisation for Education. The data used in the experiment was the case-organization’s archives formation plan including process descriptions (tehtäväpohjainen AMS). A new empirical investigation environment was formed. Four people, who could be recruited for working in the department of salary calculation, were asked to write an instruction for themselves following the AMS so they could complete the necessary tasks concerning salary calculation and processing the originated documents without any other help but the written instruction. After that they were asked to estimate, would the instruction be enough or would they need someone’s help to do the work. The instructions were also evaluated by a professional and the writer of this thesis. After evaluating the written instructions there was evidence that some knowledge – what should be done and in which order – has been transferred from the process descriptions to the written instructions. Anyway the complete task could not be correctly performed without any other help, because the knowledge on how it should be done did not transfer.

The application of cDNA and tissue microarray methods in the study of human carcinomas

Currently, numerous high-throughput technologies are available for the study of human carcinomas. In literature, many variations of these techniques have been described. The common denominator for these methodologies is the high amount of data obtained in a single experiment, in a short time period, and at a fairly low cost. However, these methods have also been described with several problems and limitations. The purpose of this study was to test the applicability of two selected high-throughput methods, cDNA and tissue microarrays (TMA), in cancer research. Two common human malignancies, breast and colorectal cancer, were used as examples. This thesis aims to present some practical considerations that need to be addressed when applying these techniques. cDNA microarrays were applied to screen aberrant gene expression in breast and colon cancers. Immunohistochemistry was used to validate the results and to evaluate the association of selected novel tumour markers with the outcome of the patients. The type of histological material used in immunohistochemistry was evaluated especially considering the applicability of whole tissue sections and different types of TMAs. Special attention was put on the methodological details in the cDNA microarray and TMA experiments. In conclusion, many potential tumour markers were identified in the cDNA microarray analyses. Immunohistochemistry could be applied to validate the observed gene expression changes of selected markers and to associate their expression change with patient outcome. In the current experiments, both TMAs and whole tissue sections could be used for this purpose. This study showed for the first time that securin and p120 catenin protein expression predict breast cancer outcome and the immunopositivity of carbonic anhydrase IX associates with the outcome of rectal cancer. The predictive value of these proteins was statistically evident also in multivariate analyses with up to a 13.1- fold risk for cancer specific death in a specific subgroup of patients.

Kansallisen näkökulman paluu

Kirjallisuusarvostelu