Risks in R&D Collaboration between Small and Large Firms

The main aim of this thesis was to find out what kinds of risks arise from collabo-ration in R&D between small and large firms. The suitability and gain of some buyer/supplier risk frameworks in examining of R&D collaboration has been in-vestigated. A risk model has been based on the buyer/supplier risks models found in the literature. Its applicability has been tested empirically by means of theme interviews with firm representatives. The risk classification framework received some confirmation. But the study also showed that the theoretical framework was not completely adequate, as a new risk class arose from communication. Collaboration causes risks, and these risks should be taken into account when R&D collaboration is planned. The advantage of risk examination is the possibility to decrease failures and losses, and to in-crease possibilities for success and economical benefits. This study should be used as a managerial analysis tool in trying to understand the form and concept of risk in risk expectancy.

Integration and Implementation of Accounting Information Systems in Global Companies Case: The UPM-Kymmene Group

Tämän tutkielman tavoitteena on perehtyä globaalin yrityksen laskentatoimen tietojärjestelmien yhtenäistämiseen ja käyttöönottoon esimerkkinä UPM-Kymmene konsernin projekti. Tutkielmassa sovelletaan hermeneuttista tutkimusotetta. Teoreettisesti aihetta tarkastellaan globalisoitumisen ja laskentatoimen tietojärjestelmille asetettavien vaatimusten pohjalta, sekä järjestelmän muutosprosessin eri vaiheissa huomioon otettavien muuttujien perusteella. Yhtenäisen laskentatoimen tietojärjestelmän tuomat edut globaalille yritykselle ovat ilmeisiä. Ennen yhtenäisen projektin kehittelyä on olennaista tutkia lähtökohdat projektin onnistumiselle ja suunnitella projektin eri vaiheet huolella. Tutkielmassa havaitaan myös, että globaalissa yrityksessä tulee huomioida eri yrityskulttuurit sekä tulosyksiköiden erilaiset toimintatavat. Johtopäätöksenä todetaan, että sekä yritysjohdon että tulosyksiköiden sitoutuneisuus projektiin ja yhtenäiset tavoitteet ovat oleellisia projektin onnistumisen kannalta.

International Accounting Standards –normistoon siirtymisen vaikutukset suomalaisten pörssiyritysten taloushallintoon ja tilinpäätökseen

Tutkimuksen päätavoitteena oli selvittää, mitä vaikutuksia IAS-tilinpäätösstandardien käyttöön siirtyminen aiheuttaa suomalaisten pörssiyritysten tilinpäätöksissä ja taloushallinnossa. Tähän tavoitteeseen edettiin alatavoitteiden avulla. Näitä olivat tilinpäätösten kansainvälisen harmonisoinnin, Euroopan Unionin IAS-asetuksen ja itse IAS-tilinpäätöksen selvittäminen. Tutkimusaineisto koostuu kirjallisuudesta ja suomalaisille pörssiyrityksille tehdystä kyselystä. Tutkimuksen teoriaosassa käytetään käsiteanalyyttista ja empiirisessä osassa nomoteettista tutkimusotetta. Tutkielman mukaan tiedon lisääntyminen lisää myönteisyyttä IAS-standardistoa kohtaan. Henkilöstön koulutus onkin avainasemassa siirtymäprojektissa. Toinen merkittävä vaikutus on uuden laskentaohjeistuksen luontitarve. Merkittävin standardi vaikutuksiltaan on IAS 14 Segmenttiraportointi.

Evolution of cameral accounting

Abstract

Service Quality of ASPs (Application Service Providers): Case of an E-accounting Service

Service quality has been a hot topic in services marketing research since the ‘80s. Although it has been widely researched in the B2C context, as well as there is some research in the B2B side, it has received very little attention specifically in the context of the ASP (Application Service Provider) business model. The thesis uses streams of service quality literature in B2C and B2B as well as research of the ASP model to form a comprehensive understanding of service quality in the context of the ASPs. The empirical part consists of a case study of Netvisor, a fast-growing Finnish ASP providing e-accounting services. The key findings are that some traditional service quality dimensions seem to apply also in the ASP context and the relative importance of some dimensions differs with regard to different customer levels. Suggestions are made to improve the service quality of the case company.

Tuottojen tunnistaminen ja kustannuskertymän ennustaminen pitkäaikaishankkeissa: tapaustutkimus

Tutkimuksen tavoitteena oli kehittää Larox Oyj:n alihankintaprojektien kustannuslaskentaa. Yrityksessä oli havaittu, että pitkäaikaishankkeiden kustan-nusten kertymistä pitää pystyä ennustamaan tarkemmin. Konstruktiivisen tutkimusotteen mukaisesti tutkimuksessa luotiin esiymmärrys kohdeyrityksen nykytilanteesta, perehdyttiin vaikuttavaan lainsäädäntöön ja aikaisempaan tutkimustietoon. Kuvaus nykytilanteesta luotiin kohdeyrityksen ja alihankkijan edustajien haastatteluiden avulla, tutustumalla yrityksen toimintaohjeisiin ja keräämällä tietoa projektien kustannusten kertymisestä. Kerätyn tiedon perusteella luotiin konstruktiot eli ratkaisuehdotukset toiminnan kehittämiseksi. Tutkimuksessa kehitettiin raportointimalli alihankintaprojektien edistymisen raportointiin. Mallin tavoitteena on yhtenäistää alihankkijoiden raportointikäy-täntöjä ja tuottaa sellaista tietoa, jota Larox tarvitsee tuottojen tunnistamista varten. Toinen konkreettinen ratkaisu on alihankintaprojektien kustannuskertymän ennustetyökalu, jonka avulla voidaan ennakoida hankkeen valmiusasteen kehitystä projektin aikana. Malli on rakennettu yhden konetyypin projektien ennustamiseen, mutta siitä voidaan helposti muokata ennustemallit muidenkin projektityyppien tarpeisiin. Tarkempien ennusteiden avulla voidaan kehittää johdon raportointia ja parantaa kassavirtojen ennustettavuutta.

The Present State and a Development Plan of Cost Accounting in Batch Production of Wind Turbine Gears

The aim of this master’s thesis was to document the present state and to create a development plan for Moventas Wind’s cost accounting. The current cost accounting system was evaluated and most fundamental problems were chosen as areas of focus in development work. The development plan includes both short- and long-term development proposals for problems identified. This report presents two alternative models for product costing. Benchmarking of cost accounting practices and modern cost accounting theories were used in development of cost accounting. It was found that the current cost accounting system functions quite well and the adjustments in unit cost rate calculation have only a minor influence on costs of goods sold. An OEE-based standard cycle concept was also developed and it was found that the implementation of this new system is worthwhile in the long-term.

Creating a customer profitability accounting model

Customer profitability accounting is a well-researched topic in the academic field, and it has been proved to posses rather undisputable benefits. However, the calculation of the customer profitabilities can be challenging, therefore the usage of the accounting is not self-explanatory in organizations. The aim of this study was to create a customer profitability accounting model for a wholesales unit in the case company to function as a sales management tool. The literature review of the study presents certain fundamental issues related to customer profitability accounting, in addition a theoretical framework for accounting model design is provided. The creation of the model was commenced by setting the requirements for it and examining the foundation of the model design, which consisted of for instance price setting and cost structure of products. This was followed by selecting approaches to the creation of the model. The result of the study was an accounting model, for which a determination of included revenues and costs was executed, along with the formulation of an allocation criteria of the costs. Lastly, the customer profitabilities were calculated in accordance with the accounting principles and the calculation logic of the model. The attained figures proved the model to provide an appropriate solution for obtaining the customer profitabilities and thus to use the accounting information as a sales management tool in for instance decision making and negotiation situations.

Models in country scale carbon accounting of forest soils

Selective papers of the workshop on "Development of models and forest soil surveys for monitoring of soil carbon", Koli, Finland, April 5-9 2006.

Pienten osakeyhtiöiden verosuunnittelu - empiirinen tutkimus

Tutkimuksen aiheeksi valittiin pienten osakeyhtiöiden verosuunnittelu. Tutkimuksen teoreettinen viitekehys perustui aiempaan laskentatoimen empiiriseen verotutkimukseen sekä laskentatoimen kontingenssiteoreettiseen pk-yritystutkimukseen. Tutkimusaineistoa kerättiin kyselytutkimuksella sekä tilinpaatostietokannasta Voitto+. Kyselytutkimukseen valittiin satunnaisotannalla osakeyhtiötä Etelä Suomen läänistä, joiden liikevaihto oli välillä 1 10 milj. euroa. Kyselytutkimukseen vastasi 216 yritystä, jolloin vastausprosentiksi saatiin 21,3. Kerättyä tutkimusaineistoa analysoitiin kvantitatiivisin menetelmin. Pääasiallisina analysointimenetelminä käytettiin pääkomponentti-, klusteri- ja regressioanalyysiä. Tutkimuksen tavoitteeksi asetettiin kokonaiskuvan muodostaminen pienten osakeyhtiöiden verosuunnittelusta, verosuunnittelun asemointi osaksi yrityksen taloushallintoa sekä yritysten erilaisia verosuunnittelustrategioita selittävien tekijöiden tunnistaminen. Tutkimusaineistosta kyettiin tunnistamaan pääkomponenttianalyysillä neljä erilaista verosuunnitteluorientaatiota: valistunut, resursseja panostava, veroa minimoiva sekä vastuuta ulkoistava. Verosuunnitteluorientaatioita kuvaavien muuttujien avulla yritykset jaettiin klusterianalyysilla neljään ryhmään. Yritykset nimettiin ryhmien luonteidensa mukaisesti verosuunnittelun osalta vastuun ulkoistajiksi, veron minimoijiksi, veroneutraaleiksi sekä valistuneiksi. Verosuunnitteluvastuuta ulkoistavien yritysten ryhmään kuului n. 57 % kyselyyn vastanneista yrityksistä. Tulos osoittaa sen, että yritykset ovat verosuunnittelun osalta paljolti riippuvaisia taloushallinnon sidosryhmistä, tilitoimistoista sekä tilintarkastajista. Tulosta voidaan tulkita myös niin, että taloushallinnon sidosryhmien ammattitaito verosuunnittelun osalta on keskeisessä roolissa, kun arvioidaan, miten yritysten välinen tasapuolisuus verotuksen osalta käytännössä toteutuu. Yritysten erilaisia verosuunnitteluorientaatioita, jotka kuvasivat yritysten verosuunnittelustrategioita, ei kyetty kvantitatiivisilla analyyseilla selittämään samoilla muuttujilla kuin yritysten erilaisia johdon laskentatoimen käytänteitä. Tätä havaintoa tulkittiin siten, että vaikka verosuunnittelu on selkeästi osa yrityksen taloushallintoa, sen asema ei ole johdon laskentatoimen käytänteiden tavoin taloushallinnon ytimessä. Tutkimuksessa kyettiin tuottamaan tuloksia, jotka kontribuoivat aiempia laskentatoimen empiirisiä verotutkimuksia, ja joilla on uutuusarvoa käytännön toimijoiden näkökulmasta.

Improving and User Interface to E-Procurement Software Used in Asset Accounting and Investigating Effects to Efficiency

This diploma thesis has been done to international organization which takes care from the accounting actions of two major companies. In this organization are used three different purchasing tools which are used when new asset master data is wanted to input to SAP R/3- system. The aim of this thesis is to find out how much changing the user interface of one of these three e-procurement programs will affect to overall efficiency in asset accounting. As an addition will be introduced project framework which can be used in future projects and which help to avoid certain steps in the development process. At the moment data needs to be inputted manually with many useless mouse clicks and data needs to be searched from many various resources which slow down the process. Other organization has better tools at the moment than the myOrders system which is under investigation Research was started by exploring the main improvement areas. After this possible defects were traced. Suggested improvements were thought by exploring literature which has been written from usability design and research. Meanwhile also directional calculations from the benefits of the project were done alongside with the analysis of the possible risks and threats. After this NSN IT approved the changes which they thought was acceptable. The next step was to program them into tool and test them before releasing to production environment. The calculations were made also from implemented improvements and compared them to planned ones From whole project was made a framework which can be utilized also to other similar projects. The complete calculation was not possible because of time schedule of the project. Important observation in the project was that efficiency is not improved not only by changing the GUI but also improving processes without any programming. Feedback from end user should be also listened more in development process. End-user is after all the one who knows the best how the program should look like.

Coopetitive advantage – How firms create and appropriate value by collaborating with their competitors

Collaboration between competing firms (coopetition) has emerged as an important issue forn business practice in many industries. Extant literature has examined coopetition on many levels of analysis, but lacks clarity in distinguishing it explicitly from cooperation between noncompeting organizations. Because of this, the performance implications of coopetition from the perspective of an individual firm are still ambiguous – some research suggests positive results whereas other studies suggest detrimental outcomes. The aim in this dissertation is to narrow these gaps by exploring how firms create and appropriate value through collaboration with their competitors. The dissertation is divided into two parts. The first part comprises an overview of the relevant literature, as well as the conclusions of the whole study, and the second part includes six research publications. Both qualitative and quantitative methodologies are utilized. The results suggest that coopetition embodies the distinctive logic of value creation and appropriation from the perspective of an individual firm, and thus differs in terms of performance implications from cooperation between non-competitors. The distinction comes from the fact that competitors have somewhat similar understanding, capabilities and interest related to certain markets, which is potentially both challenging and beneficial in terms of the individual firm’s competitiveness. It appears from the findings that there are distinctive firm-external and firm-specific factors affecting the success of a coopetition strategy. This study makes three main contributions. First, on the conceptual level it shows the distinction between coopetition and cooperation between non-rivals as a collaborative inter-organizational relationship. Secondly, it sets out a framework and propositions that enhance understanding of how value is created and appropriated in coopetition from the perspective of an individual firm. Thirdly, it offers empirical evidence of how coopetition affects firms’ innovation and market performance, and identifies the focal internal and external factors involved. In general terms, the thesis adds to our knowledge of how a firm can successfully utilize a coopetition strategy in its pursuit of improved performance.

Success of service-intensive manufacturing firms - resource-based view

The main objective of this study is to examine the relationships between resources, competitive advantage and firm success. The study focuses, on one hand, on the financial performance of service-intensive manufac-turing firms against competitors with a lower service intensity and, on the other hand, on the resources as drivers for competitive advantage and success. The purpose of the theoretical part is to link the study in the field of the strategy research. The empirical part of the study is based on the quantitative analyses of the survey data collected from 50 major suppliers of industrial machinery and transportation equipment in Europe and North America. Results indicate that service-intensive manufacturing firms have performed better and their performance has been more stable vis-à-vis their peers. The main resources that differentiate service-intensive manufacturing firms from their non-service intensive competitors are service strategy and service-oriented top management. The analyses on the VRIO resources produced only a limited amount of information and solely service-centred culture appeared to be a rent generating resource.

Accounting Beta Measuring Systematic Risk: Empirical Evidence from the Finnish Markets

The main purpose of this study is to examine whether accounting-based variables can be used to measure systematic risk of a company using Finnish data. When the fundamental sources of systematic risk are known, companies are able to manage these risks and increase company value. Accounting beta was formed based on OLS regression models. Theoretical background for the study was based on the findings of studies according to which business risk, financial risk, operating risk and growth risk can be theoretically regarded as determinants of the systematic risk. The results reveal that accounting variables describe systematic risk of a company. The accounting beta is found to be particularly sensitive to the changes in the risk components. The investigation is confidential until 15.10.2012.

Creating a Performance Measurement System for Accounting Services of Large Paper Company

The main objective of this research is creating a performance measurement system for accounting services of a large paper industry company. In this thesis there are compared different performance measurement system and then selected two systems, which are presented and compared more detailed. Performance Prism system is the used framework in this research. Performance Prism using success maps to determining objectives. Model‟s target areas are divided into five groups: stakeholder satisfaction, stakeholder contribution, strategy, processes and capabilities. The measurement system creation began by identifying stakeholders and defining their objectives. Based on the objectives are created success map. Measures are created based on the objectives and success map. Then is defined needed data for measures. In the final measurement system, there are total just over 40 measures. Each measure is defined specific target level and ownership. Number of measures is fairly large, but this is the first version of the measurement system, so the amount is acceptable.