Konenäköjärjestelmien ostokriteerit ja laitetoimittajien asiakashankinta

Työn tavoitteena oli edesauttaa Euroelektro International Oy:tä kasvattamaan asiakaskuntaansa löytämällä oikeat lähtökohdat yrityksen markkinoinnin ja myynnin tehostamiselle sekä kannattavien kohdesegmenttien valinnalle. Työssä tehtiin tutkimus, jolla määritettiin yrityksen tyypillinen asiakas, asiakastarpeet, konenäköjärjestelmien ostokriteerit ja –preferenssit sekä ostopäätöksen tekijät ja siihen vaikuttavat henkilöt. Lisäksi selvitettiin, mitkä ovat Euroelektron potentiaalisia ja ei-potentiaalisia teollisuuden aloja. Tutkimuksen tulosten perusteella laadittiin lopuksi yrityksen markkinoinnin ja myynnin kehittämisehdotelma. Tutkimus rajattiin konenäköä jo käyttäviin yrityksiin, konenäön käyttöä suunnitteleviin yrityksiin, yrityksiin, joiden ajateltiin voivan tulevaisuudessa käyttää konenäköä ja yrityksiin, jotka ovat tekemisissä konenäköasiakkaiden kanssa. Markkinointi- ja myyntiprosessien hallintaan yrityksen tulisi kehittää oma seurantaohjelma, jonka avulla valitun markkinointistrategian onnistuneisuutta voitaisiin helposti seurata, sekä laatukäsikirja, mistä löytyisivät standardoidut toimenpidemallit asiakashankintaan, kenttämyyntiin ja myyntiprojektien läpiviemiseen sekä eri toimihenkilöiden toimenkuvaukset ja vastuualueet.

Energiatehokkuuden merkitys Suomen energiapolitiikassa

Tämän diplomityön tarkoituksena on selvittää Suomen poliittisten päättäjien sekä heidän sidosryhmien mielipiteitä energiatehokkuuden lisäämisestä erityisesti yritysten näkökulmasta. Tämän lisäksi työssä selvitetään poliittisten päättäjien tärkeimpiä sidosryhmiä energiapoliittisia asioita käsiteltäessä. Tutkimuksen teoriaosassa keskitytään energiatehokkuuden kehittymiseen, energiatehokkuuden hyötyihin, keinoihin energiatehokkuuden edistämiseksi sekä uusimpiin energiatehokkuutta koskeviin strategioihin, lainsäädäntöihin ja sopimuksiin. Tutkimusaineisto kerätään laadullisella ja määrällisellä tutkimusmenetelmällä. Tarvittavan informaation saamiseksi suoritetaan eduskunnan talous-, tulevaisuus- ja ympäristövaliokunnalle kysely, joka toteutetaan Internetin välityksellä. Sidosryhmiltä tieto kerätään haastatteluilla. Tutkimustuloksien mukaan energiatehokkuuteen ei ole panostettu tarpeeksi Suomessa ja se on yksi keskeisimmistä keinoista torjua ilmastonmuutos. Yleisesti ottaen asenteet energiatehokkuuden lisäämiseksi ovat selvästi parantuneet viimevuosien aikana. Tärkeimmäksi sidosryhmäksi nousi selkeästi Työ- ja elinkeinoministeriö, mutta myös Energiateollisuus ry sekä kansalais- ja ympäristöjärjestöt koettiin tärkeiksi.

Pinnoiteteollisuudessa syntyvien maalijätteiden hyötykäyttö ja uudet liiketoimintamahdollisuudet

Tämän diplomityön tavoite on kartoittaa maalien ja lakkojen valmistuksessa syntyvien sivuvirtojen hyötykäyttöä ja hyötykäyttöpotentiaalia nykyisellään. Työn tarkoitus on toimia esiselvityksenä pinnoiteteollisuuden sivuvirtojen hyötykäyttöön liittyvien liiketoimintamahdollisuuksien syvemmälle analyysille. Teollisuuden sivuvirtoihin liittyvää tietoa kerätään tilastoista ja olemassa olevista raporteista sekä haastattelemalla teollisuus- ja palveluyritysten edustajia sekä alan asiantuntijoita. Sivuvirtojen teknisten hyötykäyttömahdollisuuksien ja liiketoiminnallisten mahdollisuuksien tarkastelua varten järjestetään työpajoja asiantuntijoille Apila Group Oy Ab:n asiantuntijaverkostossa. Neljässä haastatellussa tuotantolaitoksissa syntyi vuonna 2008 yhteensä 6 662 tonnia kiinteää jätettä ja lietteitä. 68 % näistä sivuvirroista hyötykäytettiin energiana tai polttoaineen valmistuksessa. Materiaalina sivuvirtoja hyötykäytettiin 16 % sivuvirroista, pääasiassa pahvia, paperia, metalleja sekä tynnyreitä ja kontteja. Myös merkittävä osa liuottimista otettiin talteen uudelleenhyödyntämistä varten. Tässä diplomityössä hyötykäyttömahdollisuuksien tarkempaa tarkastelua varten valittiin tavanomaisiksi jätteiksi luokiteltuja maalisivuvirtoja, joita haastatelluissa tuotantolaitoksissa syntyi noin 1 500 tonnia. Maalisivuvirtojen tärkeimmät materiaaliominaisuudet liittyvät niiden sisältämiin täyte- ja sideaineisiin, jotka muodostavat merkittävän osan maalien koostumuksesta. Selvityksen mukaan nämä ominaisuudet voidaan ottaa hyötykäyttöön erilaisissa yhdistelmämateriaaleissa, esimerkiksi ekstruusiopuristetuissa tai ahtopuristetuissa muovikuitukomposiiteissa. Komposiittien raaka-aineena käytetään jo erilaisia sivuvirtoja ja lisäksi erilaisten komposiittien markkinoiden ennustetaan kasvavan. Tämä voi tarjota mahdollisuuksia uusille palvelu-, t&k- tai tuotteistusliiketoiminnoille. Kuivilla maalijätteillä on myös hyvä lämpöarvo, jolloin energiahyötykäytön ja palamisjäännöksen materiaalihyötykäytön yhdistäminen mm. keramiikka- tai sementtiteollisuudessa voi tarjota mahdollisuuksia uusille liiketoiminnoille.

Financier’s credit risk: A Performance-Based Classification Model

The purpose of this study is to view credit risk from the financier’s point of view in a theoretical framework. Results and aspects of the previous studies regarding measuring credit risk with accounting based scoring models are also examined. The theoretical framework and previous studies are then used to support the empirical analysis which aims to develop a credit risk measure for a bank’s internal use or a risk management tool for a company to indicate its credit risk to the financier. The study covers a sample of Finnish companies from 12 different industries and four different company categories and employs their accounting information from 2004 to 2008. The empirical analysis consists of six stage methodology process which uses measures of profitability, liquidity, capital structure and cash flow to determine financier’s credit risk, define five significant risk classes and produce risk classification model. The study is confidential until 15.10.2012.

The Role of Preannouncing In Innovation Launch Strategy

The objective of this master’s thesis was to examine the role of preannouncing in innovation launch strategy. Preannouncing was studied from three different angles that were preannouncement usage, preannouncement timing and preannouncement goals and from two different perspectives that were the firm’s internal strategy and the external circumstances. The firm’s internal strategy encompassed the product strategy the firm had chosen. The external circumstances consisted of the industry, the nature of competition and the nature of market. Additionally, the product’s performance in the short term was studied in order to be able to speak out whether it is advantageous to preannounce. The empirical study was conducted as a partial replication study. The data for the empirical part was collected with a wide mailing and Internet enquiry in October 2008 – June 2009. Sample (N = 713) consisted of Finnish firms representing different industries and innovation activities. The data collection produced 272 answers and thus, the final response rate of the study was 38.15 %. The data was analyzed by using Microsoft Excel and statistical analysis program SAS Enterprise Guide. As a conclusion, the major results indicate that even if the firms use preannouncing quite often (54.8 % of the respondents), preannouncing behavior cannot be explained by industry. However, out of other external circumstances, the customer related turbulence affects on preannouncing usage. It was also revealed that the product type has an effect on preannouncing behavior. Additionally, preannouncement timing was noticed to differ according to audiences (distributors and end users).

Working capital management in the value chain of automotive industry

The objective of this Master’s thesis is to examine working capital management in the automotive industry in years 2006-2008. The study is conducted by the analysis of financial statements. The sample consists of 65 companies that represent different stages in the value chain of automotive industry beginning from raw material suppliers and ending to car dealers. Working capital management is studied by the cash conversion cycle (CCC). The results show that the average CCC of the value chain is 67 days. Car manufacturers had the longest CCC, 106 days, whereas the CCC of oil companies was the shortest, 22 days. The findings suggest that the cycle time of working capital usually follows the cycle time of inventories, since the changes in cycle times of accounts receivable and payable compensate each other. Improvements in working capital management could be achieved by sharing more accurate information in the chain for example about inventory levels and order points of customer. It could also be discussed within the automotive industry, if the long credit periods, which tie up working capital, are really needed. New technologies enable faster payments, which would reduce the cash conversion cycles, improve the profitability of companies, and increase the competitiveness of the value chain. Working capital should not be reduced at the expense of value chain partners, because nowadays the competition is rather between the value chains than between the companies. Similar research design is applied earlier to study working capital management in the value chain of pulp and paper industry. Even if the industries and the structures of the chains differ from each other, results were surprisingly similar. In future research, working capital management in other industries’ value chains could still be studied and compared to previous studies. ICT industry, for example, could be an interesting object.

Hvordan øve hellige handlinger? : en profesjonsdidaktisk studie av øving av muntlige ferdigheter innenfor en norsk presteutdanning

How can the holy craft of liturgy be trained? A study of approaches to instruction in training oral skills within education of the Norwegian clergy The theme of this study is the competence of expression of clerics performing liturgies as part of their duties in the Norwegian Lutheran Church. The aim of the study is to find a teaching practice which can raise the competence in oral expression characteristic of the clergy profession. The teaching practice is explored and discussed within the context of the basic education of the clergy. The main thesis is formulated as a question: How can the holy craft of liturgy be trained? An underpinning of the study is that liturgical acts are holy, which gives these performances an aspect of otherness. This otherness constitutes a clear agreement between the students and the teacher, and between the professional and the employer. The pre-understanding of the researcher is that these liturgical oral acts are trainable, and that there is a need and a necessity to train in these skills. Three research questions are elaborated on in the explorative section of the study: • What is characteristic of a competence of expression connected to the profession? • How can this competence of expression connected to liturgical performance be developed? • What is the importance of this competence in the holy craft of liturgy for the development of a cohesive professional self-understanding? The study is based on a research and development project where the researcher as the teacher and students from one specific clergy education in Norway (MF) were the source of the empirical material. The empirical data came from practice with two external observers› logs on the coaching, video observations, of the teacher and the students› texts on the practice under study, which is liturgical performance. The researcher›s log and field notes also provide material for the analysis. This is a qualitative project and an arts education project carried out within an interpretative framework. The theoretical framework has three perspectives: a structural approach based on the system theory of Niklas Luhmann, an epistemological approach discussing forms of knowledge in practice or informing practice and an arts education approach. The results indicate that the competence in oral liturgical performance can be considered a trainable skill, and that this training can be understood as an arts education method of instruction based on meaningful communication, dramaturgical thinking and the development of authenticity. The main result from this study can be considered as articulating and sketching the contours of the field of knowledge where the students embody the meaning of the clergy profession ‒ and this articulation has an innovative potential as knowledge combining experience and theoretical understanding.

The Role of Tactical Marketing Decisions on New Product Performance: The Moderating Effect of Entry Timing

This study focuses on observing how Finnish companies execute their new product launch processes. The main objective was to find out how entry timing moderates the relationship between launch tactics (namely product innovativeness, price and emotional advertising) and new product performance (namely sales volume and customer profitability). The empirical analysis was based on data collected in Lappeenranta University of Technology. The sample consisted of Finnish companies representing different industries and innovation activities. Altogether 272 usable responses were received representing a response rate of 37.67%. The measures were first assessed by using exploratory factor analysis (EFA) in PASW Statistics 18 and then further verified with confirmatory factor analysis (CFA) in LISREL 8.80. To test the hypotheses of the moderating effects of entry timing, hierarchical regression analysis was used in PASW Statistics 18. The results of the study revealed that the effect of product innovativeness on new product sales volume is dependent on entry timing. This implies that companies should carefully consider what would be the best time for entering the market when launching highly innovative new products. The results also depict a positive relationship between emotional advertising and new product sales volume. In addition, partial support was found for a positive relationship between pricing and new product customer profitability.

Joukkoirtisanomisen jälkeen - työllistymisen haasteet ja tukitoimien toimivuus irtisanottujen näkökulmasta

Tämän tutkimuksen tavoitteena on kuvata joukkoirtisanottujen näkökulmasta työllistymisen haasteita, tukitoimien toimivuutta ja miten tukitoimia kehittämällä pystyttäisiin vastaamaan paremmin irtisanottujen kokemiin haasteisiin. Tutkimusmenetelmä on laadullinen haastattelututkimus. Tutkimuksen aineisto kerättiin haastattelemalla yhtätoista Voikkaan tehtaalta vuonna 2006 irtisanottua työntekijää. Tutkimuksen perusteella keskeisimpinä työllistymisen haasteina nähdään ikä, yksipuolinen työkokemus, vaikeasti toiselle alalle siirrettävä ammattitaito sekä haluttomuus muuttaa toiselle paikkakunnalle. Pääsääntöisesti tukitoimiin oltiin melko tyytyväisiä, joskin mielipiteet tukitoimien onnistumisesta vaihtelivat paljon. Muutosturvan tärkeimpänä hyötynä nähtiin mahdollisuus opiskella taloudellisen tuen turvin. Tukitoimia koskevaa tiedotusta kritisoitiin mm. puutteellisista ja vääristä tiedoista.

Observations of Industry Momentum Effect in European Equity Indices

This thesis examines the existence and nature of momentum effect in European equity indices. A set of predefined indicators is used to compose momentum portfolios and different holding periods are used to test the strategies over variable time periods as well as under different economical conditions. The data consists of daily closing prices of STOXX Europe 600 index and its 18 super sector indices. Over the study period we follow the performances of a long position in the Winner portfolio, a position in the market neutral zero-cost portfolio and also a position in the risk-controlled zero-cost portfolio. The investment ratio of the risk-controlled zero-cost portfolio is negatively correlated with the realized market volatility. The results show that momentum effect is present in European industries and is most prominent in the short-term. Indicators that are based on short-term performance tend predict the over- and underperformers for the 1-month holding period more reliably than any other indicator/holding period combination. The examination of the strategies under different economical conditions shows that the market neutral approach can create significant returns in times of recession but in times of economic boom the long position in Winner portfolio outperforms the market neutral portfolio by an extensive margin.

An Overview of the Cleantech Sector - Evaluating Environmental Indicators

The purpose of the thesis is to give an overview of the cleantech sector and to give an answer how cleantech companies can evaluate the environmental sustainability of their business by utilizing various indicators and measures. The thesis is a literature study and it is based on a secondary data. Thesis presents the definitions to cleantech as well as its history and the main industries. Cleantech market overview in Finland and worldwide is also introduced. Furthermore, various indicators are presented in order to evaluate the environmental sustainability of companies' business. In the end, indicators used in cleantech sector are evaluated. As a result, the thesis presents the following methodologies that can be used in evaluating the environmental sustainability in the cleantech sector: Sustainability assessment framework, Environmental value analysis, COMPLIMENT - Environmental performance index for industries and Environmental assessment for cleaner production. More tools are still needed to evaluate environmental sustainability in the cleantech sector.

Proceedings of the PDM2013 conference, LUT 24.-25.4.2013

The 1st PDM Forum for Finland-Russia Collaboration was held at Lappeenranta University of Technology, Finland, during 25.-26.4.2013. The forum brought together leading academics, practitioners, advisors, engineers, industrial experts, and software vendors from Finland and Russia. The forum can be seen as a new integrating element between Russian and Finnish industries and universities. Over border connections between Russia and Finland may also bring new contacts and ideas to develop and expand businesses. Meeting different universities professors, PhD students, and companies’ agents facilitates the sharing and discussion of current PDM (Product Data Management) issues.

Maalaa omasi - Kuvataide psykologisen omistajuuden tarpeiden ilmentajänä

Tässä pro gradu – tutkielmassa tutkin kuvataiteen ja kuvataiteellisten menetelmien käyttöä organisaatioissa psykologisen omistajuuden tarpeiden ilmentäjänä. Tarkoituksenani on kuroa umpeen aukkoa tutkimuksen ja käytännön välillä mitä tulee kuvataiteen käyttöön organisaatioissa. Tavoitteena on selvittää, mitä lisäarvoa kuvataiteen käyttö tuo organisaatioille ja miten se ilmentää psykologista omistajuutta. Tutkimus on laadullista ja aineistona ovat strukturoimattomat haastattelut, jotka on analysoitu diskurssinanalyysillä. Haastatteluaineisosta löysin eritasoisia diskursseja. Päädiskurssi näkymättömästä näkyväksi ilmentää psykologiseen omistajuuteen motivoivista tarpeista stimuluksen tarvetta, tilan diskurssi ilmentää kodin tarvetta ja identiteetin diskurssi ilmentää identiteetin tarvetta. Tilan ja identiteetin diskurssit menevät osittain päällekkäin. Kuvataideteokset ilmentävät psykologisen omistajuuden motivaatiotarpeista erityisesti stimulusta. Ne toimivat stimuluksena tuomalla psykologista läheisyyttä organisaatioihin. Kuvataiteen käytöllä organisaatioissa saadaan näkymättömästä näkyväksi psykologiseen omistajuuteen motivoivia tarpeita. Kuvataideteokset tuovat psykologista läheisyyttä ja stimuloivat näihin liittyviä merkityksellisiä asioita. Kuvataide on esteettinen käytännön työkalu organisaatiokäyttäytymisen kehittämiseksi, tunnejohtamiseen fuusioissa ja henkilöstön sitouttamisee

Hydrometallurgical recovery of valuable metals from secondary raw materials

Wastes and side streams in the mining industry and different anthropogenic wastes often contain valuable metals in such concentrations their recovery may be economically viable. These raw materials are collectively called secondary raw materials. The recovery of metals from these materials is also environmentally favorable, since many of the metals, for example heavy metals, are hazardous to the environment. This has been noticed in legislative bodies, and strict regulations for handling both mining and anthropogenic wastes have been developed, mainly in the last decade. In the mining and metallurgy industry, important secondary raw materials include, for example, steelmaking dusts (recoverable metals e.g. Zn and Mo), zinc plant residues (Ag, Au, Ga, Ge, In) and waste slurry from Bayer process alumina production (Ga, REE, Ti, V). From anthropogenic wastes, waste electrical and electronic equipment (WEEE), among them LCD screens and fluorescent lamps, are clearly the most important from a metals recovery point of view. Metals that are commonly recovered from WEEE include, for example, Ag, Au, Cu, Pd and Pt. In LCD screens indium, and in fluorescent lamps, REEs, are possible target metals. Hydrometallurgical processing routes are highly suitable for the treatment of complex and/or low grade raw materials, as secondary raw materials often are. These solid or liquid raw materials often contain large amounts of base metals, for example. Thus, in order to recover valuable metals, with small concentrations, highly selective separation methods, such as hydrometallurgical routes, are needed. In addition, hydrometallurgical processes are also seen as more environmental friendly, and they have lower energy consumption, when compared to pyrometallurgical processes. In this thesis, solvent extraction and ion exchange are the most important hydrometallurgical separation methods studied. Solvent extraction is a mainstream unit operation in the metallurgical industry for all kinds of metals, but for ion exchange, practical applications are not as widespread. However, ion exchange is known to be particularly suitable for dilute feed solutions and complex separation tasks, which makes it a viable option, especially for processing secondary raw materials. Recovering valuable metals was studied with five different raw materials, which included liquid and solid side streams from metallurgical industries and WEEE. Recovery of high purity (99.7%) In, from LCD screens, was achieved by leaching with H2SO4, extracting In and Sn to D2EHPA, and selectively stripping In to HCl. In was also concentrated in the solvent extraction stage from 44 mg/L to 6.5 g/L. Ge was recovered as a side product from two different base metal process liquors with Nmethylglucamine functional chelating ion exchange resin (IRA-743). Based on equilibrium and dynamic modeling, a mechanism for this moderately complex adsorption process was suggested. Eu and Y were leached with high yields (91 and 83%) by 2 M H2SO4 from a fluorescent lamp precipitate of waste treatment plant. The waste also contained significant amounts of other REEs such as Gd and Tb, but these were not leached with common mineral acids in ambient conditions. Zn was selectively leached over Fe from steelmaking dusts with a controlled acidic leaching method, in which the pH did not go below, but was held close as possible to, 3. Mo was also present in the other studied dust, and was leached with pure water more effectively than with the acidic methods. Good yield and selectivity in the solvent extraction of Zn was achieved by D2EHPA. However, Fe needs to be eliminated in advance, either by the controlled leaching method or, for example, by precipitation. 100% Pure Mo/Cr product was achieved with quaternary ammonium salt (Aliquat 336) directly from the water leachate, without pH adjustment (pH 13.7). A Mo/Cr mixture was also obtained from H2SO4 leachates with hydroxyoxime LIX 84-I and trioctylamine (TOA), but the purities were 70% at most. However with Aliquat 336, again an over 99% pure mixture was obtained. High selectivity for Mo over Cr was not achieved with any of the studied reagents. Ag-NaCl solution was purified from divalent impurity metals by aminomethylphosphonium functional Lewatit TP-260 ion exchange resin. A novel preconditioning method, named controlled partial neutralization, with conjugate bases of weak organic acids, was used to control the pH in the column to avoid capacity losses or precipitations. Counter-current SMB was shown to be a better process configuration than either batch column operation or the cross-current operation conventionally used in the metallurgical industry. The raw materials used in this thesis were also evaluated from an economic point of view, and the precipitate from a waste fluorescent lamp treatment process was clearly shown to be the most promising.

Professionalization of controllers in Finland

Professions are a special category of occupations that possesses exclusive rights over its domain of expertise. Professions apply expert knowledge in their work by using professional discretion and judgment to solve their clients’ problems. With control over their expert knowledge base, professions are able to control the supply of practitioners in their field and regulate the practice in their market. Professionalization is the process during which occupations attempt to gain the status of a profession. The benefits of becoming a profession are extensive – professional autonomy, social and financial rewards, prestige, status, and an exclusive community are only a few of the privileges that established professions possess. Many aspiring occupations have tried and failed to gain the status of a profession and one of these groups is the occupation of controllers in Finland. The objective of this study to uncover, why controllers have not professionalized, which properties of the occupation correspond with the elements generally regarded to pertain to professions, and which aspects of the occupational group may hinder the professionalization project. The professionalization project of controllers is analyzed using a multi-actor model of professionalization, in which practitioners, clients, the state, training institutions, and employing organizations are considered to affect the project. The properties of the occupation of controllers are compared to features generally associated with professions. The research methodology for this thesis is qualitative, and the study is conducted as an exploratory research. The data is primarily gathered using semi-structured interviews, which were conducted between March and May 2013 lasting from 40 minutes to an hour. In total, four controllers were interviewed, who worked for different companies operating in different industries, and whose experience of working as a controller varied between a few years to nearly 15 years. The data in this study indicates that although controllers possess qualities that distinguish professions from other occupational groups, the professionalization of controllers may not be plausible. Controllers enjoy considerable autonomy in organizations, and they possess a strong orientation towards serving their clients. The more profound problem with the occupation is its non-exclusive, indistinct knowledge base that does not rely solely on a single knowledge base. Controllers’ expertise is relatively organization-specific and built on several different fields of knowledge and not just management accounting, which could be considered as their primary knowledge base. In addition, controllers have not organized themselves, which is a quintessential, but by no means a sufficient prerequisite for professionalization.