Effects of the digital subtitling software on the subtitling process : A survey among Finnish professional television subtitlers

Tutkielma käsittelee suomalaisten televisiotekstittäjien ammatillisuutta, käännösprosessia ja digitaalisten tekstitysohjelmien vaikutuksia tekstitysprosessiin ammattitekstittäjien näkökulmasta. Suomen television digitalisoituminen on aiheuttanut mullistuksia myös tekstitysalalla kun tekstitettävä kuvamateriaali on ryhdytty toimittamaan käännöstoimistoille ja tekstittäjille digitaalisena. Teoriaosuudessa käsitellään käännös- ja tekstitystutkimusta sekä koulutusta Suomessa, ammattitaitoa ja ammatillisuutta sekä kääntämisen apukeinoja. Tekstittäminen esitellään erikoistuneena kääntämisen muotona. On kuitenkin myös huomioitava, että kääntäminen on yksi vaihe tekstitysprosessissa. Teoriaosuus päättyy suomalaisten televisiotekstittäjien arjen ja työkentän nykytilanteen käsittelyyn – tekstittäjät työskentelevät monenlaisilla työehdoilla ja laadun kriteerit saatetaan joutua arvioimaan uudelleen. Empiirisen osan alussa esitetään, että suomalaisia televisiotekstittäjiä on haastateltu yllättävän vähän, ja Jääskeläisen ajatuksiin nojaten mainitaan, että tekstittämisen alalla on vielä paljon tutkimatta – etenkin suomalaisesta tekstitysprosessista löytyy tutkittavaa. Tutkimuskohde on ammatikseen televisioon tekstityksiä tekevät kääntäjät. Suomalaiselle tekstitykseen erikoistuneelle käännöstoimistolle työskenteleville tekstittäjille lähetettiin alkutalvesta 2008 kyselylomake, jolla kartoitettiin sekä monivalintakysymyksillä että avoimilla kysymyksillä heidän ammatillisuuttaan, työmenetelmiään, käännös- ja tekstitysprosessiaan, ammattiylpeyttään ja -identiteettiään, ajanhallintaansa, sekä heidän käyttämäänsä digitaalista tekstitysohjelmaa. Tutkimuksessa kävi ilmi, että lähes kolmanneksella vastaajista on ammatistaan neutraali tai jopa negatiivinen käsitys. Näitä tekstittäjiä yhdistää se seikka, että kaikilla on alle 5 vuotta kokemusta alalta. Valtaosa vastanneista on kuitenkin ylpeitä siitä, että toimivat suomen kielen ammattilaisina. Tekstitysprosessi oli lomakkeessa jaettu esikatseluvaiheeseen, käännösvaiheeseen, ajastamisvaiheeseen ja korjauskatseluvaiheeseen. Tekstittäjät pyydettiin mm. arvioimaan tekstitysprosessinsa kokonaiskestoa. Kestoissa ilmeni suuria eroavaisuuksia, joista ainakin osa korreloi kokemuksen kanssa. Runsas puolet vastaajista on hankkinut digitaalisen tekstitysohjelmiston käyttöönsä ja osa ajastaa edelleen käännöstoimistossa muun muassa ohjelmiston kalleuden vuoksi. Digitaalisen ohjelmiston myötä tekstitysprosessiin ja työkäytänteisiin on tullut muutoksia, kun videonauhureista ja televisioista on siirrytty pelkän tietokoneen käyttöön. On mahdollista tehdä etätyötä kaukomailta käsin, kääntää ja ajastaa lomittain tai tehdä esiajastus ja kääntää sitten. Digitaalinen tekniikka on siis mahdollistanut tekstitysprosessin muuttumisen ja vaihtoehtoiset työmenetelmät, mutta kaikista menetelmistä ei välttämättä ole tekstittäjälle hyötyä. Perinteinen tekstitysprosessi (esikatselu, repliikkijakojen merkitseminen käsikirjoitukseen, kääntäminen ja repliikkien laadinta, korjaukset ja tarkastuskatselu) vaikuttaa edelleen tehokkaimmalta. Vaikka työkäytänteet eroavat toisistaan, kokonaiskäsitys on se, että digitalisoitumisen alkukangertelujen jälkeen tekstittäjien työskentely on tehostunut.

Automatic Lameness Detection in a Milking Robot : Instrumentation, measurement software, algorithms for data analysis and a neural network model

The aim of this thesis is to develop a fully automatic lameness detection system that operates in a milking robot. The instrumentation, measurement software, algorithms for data analysis and a neural network model for lameness detection were developed. Automatic milking has become a common practice in dairy husbandry, and in the year 2006 about 4000 farms worldwide used over 6000 milking robots. There is a worldwide movement with the objective of fully automating every process from feeding to milking. Increase in automation is a consequence of increasing farm sizes, the demand for more efficient production and the growth of labour costs. As the level of automation increases, the time that the cattle keeper uses for monitoring animals often decreases. This has created a need for systems for automatically monitoring the health of farm animals. The popularity of milking robots also offers a new and unique possibility to monitor animals in a single confined space up to four times daily. Lameness is a crucial welfare issue in the modern dairy industry. Limb disorders cause serious welfare, health and economic problems especially in loose housing of cattle. Lameness causes losses in milk production and leads to early culling of animals. These costs could be reduced with early identification and treatment. At present, only a few methods for automatically detecting lameness have been developed, and the most common methods used for lameness detection and assessment are various visual locomotion scoring systems. The problem with locomotion scoring is that it needs experience to be conducted properly, it is labour intensive as an on-farm method and the results are subjective. A four balance system for measuring the leg load distribution of dairy cows during milking in order to detect lameness was developed and set up in the University of Helsinki Research farm Suitia. The leg weights of 73 cows were successfully recorded during almost 10,000 robotic milkings over a period of 5 months. The cows were locomotion scored weekly, and the lame cows were inspected clinically for hoof lesions. Unsuccessful measurements, caused by cows standing outside the balances, were removed from the data with a special algorithm, and the mean leg loads and the number of kicks during milking was calculated. In order to develop an expert system to automatically detect lameness cases, a model was needed. A probabilistic neural network (PNN) classifier model was chosen for the task. The data was divided in two parts and 5,074 measurements from 37 cows were used to train the model. The operation of the model was evaluated for its ability to detect lameness in the validating dataset, which had 4,868 measurements from 36 cows. The model was able to classify 96% of the measurements correctly as sound or lame cows, and 100% of the lameness cases in the validation data were identified. The number of measurements causing false alarms was 1.1%. The developed model has the potential to be used for on-farm decision support and can be used in a real-time lameness monitoring system.

Measuring and tracking quality factors in Free and Open Source Software projects

Free and Open Source Software (FOSS) has gained increased interest in the computer software industry, but assessing its quality remains a challenge. FOSS development is frequently carried out by globally distributed development teams, and all stages of development are publicly visible. Several product and process-level quality factors can be measured using the public data. This thesis presents a theoretical background for software quality and metrics and their application in a FOSS environment. Information available from FOSS projects in three information spaces are presented, and a quality model suitable for use in a FOSS context is constructed. The model includes both process and product quality metrics, and takes into account the tools and working methods commonly used in FOSS projects. A subset of the constructed quality model is applied to three FOSS projects, highlighting both theoretical and practical concerns in implementing automatic metric collection and analysis. The experiment shows that useful quality information can be extracted from the vast amount of data available. In particular, projects vary in their growth rate, complexity, modularity and team structure.

Free/Open Source Software Development : Results and Research Methods

Free and open source software development is an alternative to traditional software engineering as an approach to the development of complex software systems. It is a way of developing software based on geographically distributed teams of volunteers without apparent central plan or traditional mechanisms of coordination. The purpose of this thesis is to summarize the current knowledge about free and open source software development and explore the ways on which further understanding on it could be gained. The results of research on the field as well as the research methods are introduced and discussed. Also adapting software process metrics to the context of free and open source software development is illustrated and the possibilities to utilize them as tools to validate other research are discussed.

Cryptographic Software Export Controls in the EU

Certain software products employing digital techniques for encryption of data are subject to export controls in the EU Member States pursuant to Community law and relevant laws in the Member States. These controls are agreed globally in the framework of the so-called Wassenaar Arrangement. Wassenaar is an informal non-proliferation regime aimed at promoting international stability and responsibility in transfers of strategic (dual-use) products and technology. This thesis covers provisions of Wassenaar, Community export control laws and export control laws of Finland, Sweden, Germany, France and United Kingdom. This thesis consists of five chapters. The first chapter discusses the ratio of export control laws and the impact they have on global trade. The ratio is originally defence-related - in general to prevent potential adversaries of participating States from having the same tools, and in particular in the case of cryptographic software to enable signals intelligence efforts. Increasingly as the use of cryptography in a civilian context has mushroomed, export restrictions can have negative effects on civilian trade. Information security solutions may also be took weak because of export restrictions on cryptography. The second chapter covers the OECD's Cryptography Policy, which had a significant effect on its member nations' national cryptography policies and legislation. The OECD is a significant organization,because it acts as a meeting forum for most important industrialized nations. The third chapter covers the Wassenaar Arrangement. The Arrangement is covered from the viewpoint of international law and politics. The Wassenaar control list provisions affecting cryptographic software transfers are also covered in detail. Control lists in the EU and in Member States are usually directly copied from Wassenaar control lists. Controls agreed in its framework set only a minimum level for participating States. However, Wassenaar countries can adopt stricter controls. The fourth chapter covers Community export control law. Export controls are viewed in Community law as falling within the domain of Common Commercial Policy pursuant to Article 133 of the EC Treaty. Therefore the Community has exclusive competence in export matters, save where a national measure is authorized by the Community or falls under foreign or security policy derogations established in Community law. The Member States still have a considerable amount of power in the domain of Common Foreign and Security Policy. They are able to maintain national export controls because export control laws are not fully harmonized. This can also have possible detrimental effects on the functioning of internal market and common export policies. In 1995 the EU adopted Dual-Use Regulation 3381/94/EC, which sets common rules for exports in Member States. Provisions of this regulation receive detailed coverage in this chapter. The fifth chapter covers national legislation and export authorization practices in five different Member States - in Finland, Sweden, Germany, France and in United Kingdom. Export control laws of those Member States are covered when the national laws differ from the uniform approach of the Community's acquis communautaire. Keywords: export control, encryption, software, dual-use, license, foreign trade, e-commerce, Internet

Constructing Stability in Software Product Development during Organizational Restructurings

We all have fresh in our memory what happened to the IT sector only a few years ago when the IT-bubble burst. The upswing of productivity in this sector slowed down, investors lost large investments, many found themselves looking for a new job, and countless dreams fell apart. Product developers in the IT sector have experienced a large number of organizational restructurings since the IT boom, including rapid growth, downsizing processes, and structural reforms. Organizational restructurings seem to be a complex and continuous phenomenon people in this sector have to deal with. How do software product developers retrospectively construct their work in relation to organizational restructurings? How do organizational restructurings bring about specific social processes in product development? This working paper focuses on these questions. The overall aim is to develop an understanding of how software product developers construct their work during organizational restructurings. The theoretical frame of reference is based on a social constructionist approach and discourse analysis. This approach offers more or less radical and critical alternatives to mainstream organizational theory. Writings from this perspective attempt to investigate and understand sociocultural processes by which various realities are created. Therefore these studies aim at showing how people participate in constituting the social world (Gergen & Thatchenkery, 1996); knowledge of the world is seen to be constructed between people in daily interaction, in which language plays a central role. This means that interaction, especially the ways of talking and writing about product development during organizational restructurings, become the target of concern. This study consists of 25 in-depth interviews following a pilot study based on 57 semi-structured interviews. In this working paper I analyze 9 in-depth interviews. The interviews were conducted in eight IT firms. The analysis explores how discourses are constructed and function, as well as the consequences that follow from different discourses. The analysis shows that even though the product developers have experienced many organizational restructurings, some of which have been far-reaching, their accounts build strongly on a stability discourse. According to this discourse product development is, perhaps surprisingly, not influenced to a great extent by organizational restructurings. This does not mean that product development is static. According to the social constructionist approach, product development is constantly being reproduced and maintained in ongoing processes. In other words stable effects are also ongoing achievements and these are of particular interest in this study. The product developers maintain rather than change the product development through ongoing processes of construction, even when they experience continuous extensive organizational restructurings. The discourse of stability exists alongside other discourses, some which contradict each other. Together they direct product development and generate meanings. The product developers consequently take an active role in the construction of their work during organizational restructurings. When doing this they also negotiate credible positions for themselves

Lean Thinking in Software Development : Impacts of Kanban on Projects

The history of software development in a somewhat systematical way has been performed for half a century. Despite this time period, serious failures in software development projects still occur. The pertinent mission of software project management is to continuously achieve more and more successful projects. The application of agile software methods and more recently the integration of Lean practices contribute to this trend of continuous improvement in the software industry. One such area warranting proper empirical evidence is the operational efficiency of projects. In the field of software development, Kanban as a process management method has gained momentum recently, mostly due to its linkages to Lean thinking. However, only a few empirical studies investigate the impacts of Kanban on projects in that particular area. The aim of this doctoral thesis is to improve the understanding of how Kanban impacts on software projects. The research is carried out in the area of Lean thinking, which contains a variety of concepts including Kanban. This article-type thesis conducts a set of case studies expanded with the research strategy of quasi-controlled experiment. The data-gathering techniques of interviews, questionnaires, and different types of observations are used to study the case projects, and thereby to understand the impacts of Kanban on software development projects. The research papers of the thesis are refereed, international journal and conference publications. The results highlight new findings regarding the application of Kanban in the software context. The key findings of the thesis suggest that Kanban is applicable to software development. Despite its several benefits reported in this thesis, the empirical evidence implies that Kanban is not all-encompassing but requires additional practices to keep development projects performing appropriately. Implications for research are given, as well. In addition to these findings, the thesis contributes in the area of plan-driven software development by suggesting implications both for research and practitioners. As a conclusion, Kanban can benefit software development projects but additional practices would increase its potential for the projects.

Liquid Chromatography-Mass Spectrometry in Studies of Drug Metabolism and Permeability

Poor pharmacokinetics is one of the reasons for the withdrawal of drug candidates from clinical trials. There is an urgent need for investigating in vitro ADME (absorption, distribution, metabolism and excretion) properties and recognising unsuitable drug candidates as early as possible in the drug development process. Current throughput of in vitro ADME profiling is insufficient because effective new synthesis techniques, such as drug design in silico and combinatorial synthesis, have vastly increased the number of drug candidates. Assay technologies for larger sets of compounds than are currently feasible are critically needed. The first part of this work focused on the evaluation of cocktail strategy in studies of drug permeability and metabolic stability. N-in-one liquid chromatography-tandem mass spectrometry (LC/MS/MS) methods were developed and validated for the multiple component analysis of samples in cocktail experiments. Together, cocktail dosing and LC/MS/MS were found to form an effective tool for increasing throughput. First, cocktail dosing, i.e. the use of a mixture of many test compounds, was applied in permeability experiments with Caco-2 cell culture, which is a widely used in vitro model for small intestinal absorption. A cocktail of 7-10 reference compounds was successfully evaluated for standardization and routine testing of the performance of Caco-2 cell cultures. Secondly, cocktail strategy was used in metabolic stability studies of drugs with UGT isoenzymes, which are one of the most important phase II drug metabolizing enzymes. The study confirmed that the determination of intrinsic clearance (Clint) as a cocktail of seven substrates is possible. The LC/MS/MS methods that were developed were fast and reliable for the quantitative analysis of a heterogenous set of drugs from Caco-2 permeability experiments and the set of glucuronides from in vitro stability experiments. The performance of a new ionization technique, atmospheric pressure photoionization (APPI), was evaluated through comparison with electrospray ionization (ESI), where both techniques were used for the analysis of Caco-2 samples. Like ESI, also APPI proved to be a reliable technique for the analysis of Caco-2 samples and even more flexible than ESI because of the wider dynamic linear range. The second part of the experimental study focused on metabolite profiling. Different mass spectrometric instruments and commercially available software tools were investigated for profiling metabolites in urine and hepatocyte samples. All the instruments tested (triple quadrupole, quadrupole time-of-flight, ion trap) exhibited some good and some bad features in searching for and identifying of expected and non-expected metabolites. Although, current profiling software is helpful, it is still insufficient. Thus a time-consuming largely manual approach is still required for metabolite profiling from complex biological matrices.

Japanese Video Game Localization : A Case Study of Sony's Sairen Series

This thesis is a comparative case study in Japanese video game localization for the video games Sairen, Sairen 2 and Sairen Nyûtoransurêshon, and English-language localized versions of the same games as published in Scandinavia and Australia/New Zealand. All games are developed by Sony Computer Entertainment Inc. and published exclusively for Playstation2 and Playstation3 consoles. The fictional world of the Sairen games draws much influence from Japanese history, as well as from popular and contemporary culture, and in doing so caters mainly to a Japanese audience. For localization, i.e. the adaptation of a product to make it accessible to users outside the original market it was intended for in the first place, this is a challenging issue. Video games are media of entertainment, and therefore localization practice must preserve the games’ effects on the players’ emotions. Further, video games are digital products that are comprised of a multitude of distinct elements, some of which are part of the game world, while others regulate the connection between the player as part of the real world and the game as digital medium. As a result, video game localization is also a practice that has to cope with the technical restrictions that are inherent to the medium. The main theory used throughout the thesis is Anthony Pym’s framework for localization studies that considers the user of the localized product as a defining part of the localization process. This concept presupposes that localization is an adaptation that is performed to make a product better suited for use during a specific reception situation. Pym also addresses the factor that certain products may resist distribution into certain reception situations because of their content, and that certain aspects of localization aim to reduce this resistance through significant alterations of the original product. While Pym developed his ideas with mainly regular software in mind, they can also be adapted well to study video games from a localization angle. Since modern video games are highly complex entities that often switch between interactive and non-interactive modes, Pym’s ideas are adapted throughout the thesis to suit the particular elements being studied. Instances analyzed in this thesis include menu screens, video clips, in-game action and websites. The main research questions focus on how the games’ rules influence localization, and how the games’ fictional domain influences localization. Because there are so many peculiarities inherent to the medium of the video game, other theories are introduced as well to complement the research at hand. These include Lawrence Venuti’s discussions of foreiginizing and domesticating translation methods for literary translation, and Jesper Juul’s definition of games. Additionally, knowledge gathered from interviews with video game localization professionals in Japan during September and October 2009 is also utilized for this study. Apart from answering the aforementioned research questions, one of this thesis’ aims is to enrich the still rather small field of game localization studies, and the study of Japanese video games in particular, one of Japan’s most successful cultural exports.

Merenkulun turvallisuuden koetinkiviä : Terminologisen tiedon poiminta teksteistä

The methodology of extracting information from texts has widely been described in the current literature. However, the methodology has been developed mainly for the purposes of other fields than terminology science. In addition, the research has been English language oriented. Therefore, there are no satisfactory language-independent methods for extracting terminological information from texts. The aim of the present study is to form the basis for a further improvement of methods for extraction of terminological information. A further aim is to determine differences in term extraction between subject groups with or without knowledge of the special field in question. The study is based on the theory of terminology, and has mainly a qualitative approach. The research material consists of electronically readable specialized texts in the subject domain of maritime safety. Textbooks, conference papers, research reports and articles from professional journals in Finnish and in Russian are included. The thesis first deals with certain term extraction methods. These are manual term identification and semi-automatic term extraction, the latter of which was carried out by using three commercial computer programs. The results of term extraction were compared and the recall and precision of the methods were evaluated. The latter part of the study is dedicated to the identification of concept relations. Certain linguistic expressions, which some researchers call knowledge probes, were applied to identify concept relations. The results of the present thesis suggest that special field knowledge is an advantage in manual term identification. However, in the candidate term lists the variation between subject groups was not as remarkable as it was between individual subjects. The term extraction software tested here produces candidate term lists which can be useful, but only after some manual work. Therefore, the work emphasizes the need to further develop term extraction software. Furthermore, the analyses indicate that there are a certain number of terms which were extracted by all the subjects and the software. These terms we call core terms. As the result of the experiment on linguistic expressions which signal concept relations, a proposal of Finnish and Russian knowledge probes in the field of maritime safety was made. The main finding was that it would be useful to combine the use of knowledge probes with semi-automatic term extraction since knowledge probes usually occur in the vicinity of terms.

Esimiestaitojen tärkeys, hallinta ja kehitystarpeet

This study examines the leadership skills in municipal organisation. The study reflects the manager views on leadership skills required. The purpose of this study was to reflect the most important leadership skills currently and in the future as well as the control of these skills. The study also examines the importance of the change and development needs of the leadership skills. In addition, the effect of background variables on evaluation of leadership skills were also examined. The quantitative research method was used in the study. The material was collected with the structured questionnaire from 324 Kotka city managers. SPSS-program was used to analyse the study material. Factor analysis was used as the main method for analysis. In addition, mean and standard deviations were used to better reflect the study results. Based on the study results, the most important leadership skills currently and in the future are associated with internet skills, work control, problem solving and human resource management skills. Managers expected the importance of leadership skills to grow in the future. Main growth is associated with the software utilisation, language skills, communication skills as well as financial leadership skills. Strongest competence according to managers is associated with the internet skills. Managers also considered to control well the skills related to employee know-how and manager networking. In addition, significant development needs are required in leadership skills. Main improvement areas were discovered in software utilisation, work control, human resource management skills as well as skills requiring problem solving. It should be noted that the main improvement areas appeared in the leadership skills that were evaluated as most important apart from software utilisation. Position, municipal segments and sex were observed to explain most of the deviation in received responses.

Datorstödda studier i hälso- och socialvård : MuPSiNet-projektet

The aim of the study was to explore why the MuPSiNet project - a computer and network supported learning environment for the field of health care and social work - did not develop as expected. To grasp the problem some hypotheses were formulated. The hypotheses regarded the teachers' skills in and attitudes towards computing and their attitudes towards constructivist study methods. An online survey containing 48 items was performed. The survey targeted all the teachers within the field of health care and social work in the country, and it produced 461 responses that were analysed against the hypotheses. The reliability of the variables was tested using the Cronbach alpha coefficient and t-tests. Poor basic computing skills among the teachers combined with a vulnerable technical solution, and inadequate project management combined with lack of administrative models for transforming economic resources into manpower were the factors that turned out to play a decisive role in the project. Other important findings were that the teachers had rather poor skills and knowledge in computing, computer safety and computer supported instruction, and that these skills were significantly poorer among female teachers who were in majority in the sample. The fraction of teachers who were familiar with software for electronic patient records (EPR) was low. The attitudes towards constructivist teaching methods were positive, and further education seemed to utterly increase the teachers' readiness to use alternative teaching methods. The most important conclusions were the following: In order to integrate EPR software as a natural tool in teaching planning and documenting health care, it is crucial that the teachers have sufficient basic skills in computing and that more teachers have personal experience of using EPR software. In order for computer supported teaching to become accepted it is necessary to arrange with extensive further education for the teachers presently working, and for that further education to succeed it should be backed up locally among other things by sufficient support in matters concerning computer supported teaching. The attitudes towards computing showed significant gender differences. Based on the findings it is suggested that basic skills in computing should also include an awareness of data safety in relation to work in different kinds of computer networks, and that projects of this kind should be built up around a proper project organisation with sufficient resources. Suggestions concerning curricular development and further education are also presented. Conclusions concerning the research method were that reminders have a better effect, and that respondents tend to answer open-ended questions more verbosely in electronically distributed online surveys compared to traditional surveys. A method of utilising randomized passwords to guarantee respondent anonymity while maintaining sample control is presented. Keywords: computer-assisted learning, computer-assisted instruction, health care, social work, vocational education, computerized patient record, online survey

Virtuaalimaailmoja valtaamassa : verkko-opetusinnovaation leviäminen koulun maantieteeseen vuosituhannen vaihteessa

Tutkimus käsittelee verkko-opetusinnovaation leviämistä perusasteen ja lukion maantieteeseen vuosina 1998–2004. Työssä sovellettiin opetusinnovaation leviämismallia ja innovaatioiden diffuusioteoriaa. Aineisto hankittiin seitsemänä vuotena kyselylomakkeilla maantieteen verkko-opetuksen edelläkävijäopettajilta, jotka palauttivat 326 lomaketta. Tutkimuksen pääongelmat olivat 1) Millaisia edellytyksiä edelläkävijäopettajilla on käyttää verkko-opetusta koulun maantieteessä? 2) Mitä sovelluksia ja millä tavoin edelläkävijäopettajat käyttävät maantieteen verkko-opetuksessa? 3) Millaisia käyttökokemuksia edelläkävijäopettajat ovat saaneet maantieteen verkko-opetuksesta? Tutkimuksessa havaittiin, että tietokoneiden riittämätön määrä ja puuttuminen aineluokasta vaikeuttivat maantieteen verkko-opetusta. Työssä kehitettiin opettajien digitaalisten mediataitojen kuutiomalli, johon kuuluvat tekniset taidot, informaation prosessointitaidot ja viestintätaidot. Opettajissa erotettiin kolme verkko-opetuksen käyttäjätyyppiä: informaatiohakuiset kevytkäyttäjät, viestintähakuiset peruskäyttäjät ja yhteistyöhakuiset tehokäyttäjät. Verkko-opetukseen liittyi intensiivisiä myönteisiä ja kielteisiä kokemuksia. Se toi iloa ja motivaatiota opiskeluun. Sitä pidettiin rikastuttavana lisänä, joka haluttiin integroida opetukseen hallitusti. Edelläkävijäopettajat ottivat käyttöön tietoverkoissa olevaa informaatiota ja sovelsivat työvälineohjelmia. He pääsivät alkuun todellisuutta jäljittelevien virtuaalimaailmojen: satelliittikuvien toistaman maapallon, digitaalikarttojen ja simulaatioiden käytössä. Opettajat kokeilivat verkon sosiaalisia tiloja reaaliaikaisen viestinnän, keskusteluryhmien ja ryhmätyöohjelmien avulla. Mielikuvitukseen perustuvat virtuaalimaailmat jäivät vähälle sillä opettajat eivät juuri pelanneet viihdepelejä. He omaksuivat virtuaalimaailmoista satunnaisia palasia käytettävissä olevan laite- ja ohjelmavarustuksen mukaan. Virtuaalimaailmojen valtaus eteni tutkimuksen aikana digitaalisen informaation hyödyntämisestä viestintäsovelluksiin ja aloittelevaan yhteistyöhön. Näin opettajat laajensivat virtuaalireviiriään tietoverkkojen dynaamisiksi toimijoiksi ja pääsivät uusin keinoin tyydyttämään ihmisen universaalia tarvetta yhteyteen muiden kanssa. Samalla opettajat valtautuivat informaation kuluttajista sen tuottajiksi, objekteista subjekteiksi. Verkko-opetus avaa koulun maantieteelle huomattavia mahdollisuuksia. Mobiililaitteiden avulla informaatiota voidaan kerätä ja tallentaa maasto-olosuhteissa, ohjelmilla sitä voidaan muuntaa muodosta toiseen. Internetin autenttiset ja ajantasaiset materiaalit tuovat opiskeluun konkretiaa ja kiinnostavuutta, mallit, simulaatiot ja paikkatieto havainnollistavat ilmiöitä. Viestintä- ja yhteistyövälineet sekä sosiaaliset informaatiotilat vahvistavat yhteistyötä. Avainsanat: verkko-opetus, internet, virtuaalimaailmat, maantiede, innovaatiot

Ravintoa keholle, ruokaa mielelle : vertailututkimus pohjoismaisten nuorten ruokatottumuksista kotona ja koulussa

Aims. The main meals that youngsters have during the day are eaten at home and at school. In the Nordic countries breakfast and supper are often eaten with other members of the family. The way that Nordic countries arrange the school lunch and the frequency of family meals differ between countries. However, the challenges related to eating habits of the young are surprisingly similar. The aim of this study is to discuss how the Nordic countries could support youngsters’ healthy eating habits. This study was carried out as a part of a Nordic research project and it completed the work done by Kauppinen (2009) and Niemi (2009) in their Master’s Theses. The research questions are: 1. How do the youngsters evaluate their own eating habits and those of their family? 2. How do the youngsters evaluate the influence of home, family and school on their own eating habits? 3. What kind of relationship exists between eating at home and at school according to the data? Data and methods. A quantitative internet-based survey was used to collect data (N=1539) on the 9th graders conceptions and understandings. The survey consisted of respondents from Finland (N=586), Sweden (N=427), Denmark (N=295) and Norway (N=246). In this study the whole data to the appropriate extent was analyzed. The analysis was done with the SPSS-software and included examination of means, standard deviations, cross-tabulations, Pearson´s correlations, Chi-squared -tests, t-tests and one-way analysis of variance (ANOVA). The results were compaired between the countries and between sexes. Results and discussion. The studied youngsters evaluated their own eating habits positively. There were statistically signifigant differences (p< .05) between countries concerning the people who influence the youngsters’ healthy eating habits. Youngsters from Finland and Sweden considered making healthy choices at school easier than those from Denmark and Norway. Also eating a so called healthy lunch at school was more common in Finland and in Sweden. Eating breakfast and eating a healthy meal at school had a statistically significant interconnection (p< .001). The differences between sexes were not equal between the countries. The results supported those from previous studies, but also raised ideas for further study. Youngsters’ near environments should support their possibilities to make healthy choices and to participate to the decicion making process. Co-operation between the Nordic countries and between the home and the school is important. Listening to the youngsters’ own voice is a challence and a possibility for developing both home economics education and research in this area. Key words: Nordic countries, youngsters, healthy eating habits, eating at home, school meals

Koulutuksellisen syrjäytymisriskin ennustettavuus yhteishakuvalintojen kautta tarkasteltuna : koulupudokkuusriskin yhteys oppilaan kognitiiviseen kompetenssiin, koulumenestykseen sekä itseä ja vanhempia koskeviin uskomuksiin

The objective of this study was to find factors that could predict educational dropout. Dropout risk was assessed against pupil’s cognitive competence, success in school, and personal beliefs regarding self and parents, while taking into account the pupil’s background and gender. Based on earlier research, an assumption was made that a pupil’s gender, success in school, and parent’s education would be related with dropping out. This study is part of a project funded by the Academy of Finland and led by Professor Jarkko Hautamäki. The project aims to use longitudinal study to assess the development of pupils’ skills in learning to learn. The target group of this study consisted all Finnish speaking ninth graders of a municipality in Southern Finland. There were in total 1534 pupils, of which 809 were girls and 725 boys. The assessment of learning to learn skills was performed about ninth graders in spring 2004. “Opiopi” test material was used in the assessment, consisting of cognitive tests and questions measuring beliefs. At the same time, pupils’ background information was collected together with their self-reported average grade of all school subjects. During spring 2009, the pupils’ joint application data from years 2004 and 2005 was collected from the Finnish joint application registers. The data were analyzed using quantitative methods assisted by the SPSS for Windows computer software. Analysis was conducted through statistical indices, differences in grade averages, multilevel model, multivariate analysis of variance, and logistic regression analysis. Based on earlier research, dropouts were defined as pupils that had not been admitted to or had not applied to second degree education under the joint application system. Using this definition, 157 students in the target group were classified as dropouts (10 % of the target group): 88 girls and 69 boys. The study showed that the school does not affect the drop-out risk but the school class explains 7,5 % of variation in dropout risk. Among girls, dropping out is predicted by a poor average grade, a lack of beliefs supporting learning, and an unrealistic primary choice in joint application system compared to one’s success in school. Among boys, a poor average grade, unrealistic choices in joint application system, and the belief of parent’s low appreciation of education were related to dropout risk. Keywords educational exclusion, school dropout, success in school, comprehensive school, learning to learn