Design and path planning for a remote-brained service robot

This paper presents a novel robot named "TUT03-A" with expert systems, speech interaction, vision systems etc. based on remote-brained approach. The robot is designed to have the brain and body separated. There is a cerebellum in the body. The brain with the expert systems is in charge of decision and the cerebellum control motion of the body. The brain-body. interface has many kinds of structure. It enables a brain to control one or more cerebellums. The brain controls all modules in the system and coordinates their work. The framework of the robot allows us to carry out different kinds of robotics research in an environment that can be shared and inherited over generations. Then we discuss the path planning method for the robot based on ant colony algorithm. The mathematical model is established and the algorithm is achieved with the Starlogo simulating environment. The simulation result shows that it has strong robustness and eligible pathfinding efficiency.

Design and path planning for a remote-brained service robot

This article introduced an effective design method of robot called remote-brain, which is made the brain and body separated. It leaves the brain in the mother environment, by which we mean the environment in which the brain's software is developed, and talks with its body by wireless links. It also presents a real robot TUT06-B based on this method which has human-machine interaction, vision systems, manipulator etc. Then it discussed the path planning method for the robot based on ant colony algorithm in details, especially the Ant-cycle model. And it also analyzed the parameter of the algorithm which can affect the convergence. Finally, it gives the program flow chat of this algorithm.

Large depth-of-view portable three-dimensional laser scanner and its segmental calibration for robot vision

A portable 3D laser scanning system has been designed and built for robot vision. By tilting the charge coupled device (CCD) plane of portable 3D scanning system according to the Scheimpflug condition, the depth-of-view is successfully extended from less than 40 to 100 mm. Based on the tilted camera model, the traditional two-step camera calibration method is modified by introducing the angle factor. Meanwhile, a novel segmental calibration approach, i.e., dividing the whole work range into two parts and calibrating, respectively, with corresponding system parameters, is proposed to effectively improve the measurement accuracy of the large depth-of-view 3D laser scanner. In the process of 3D reconstruction, different calibration parameters are used to transform the 2D coordinates into 3D coordinates according to the different positions of the image in the CCD plane, and the measurement accuracy of 60 mu m is obtained experimentally. Finally, the experiment of scanning a lamina by the large depth-of-view portable 3D laser scanner used by an industrial robot IRB 4400 is also employed to demonstrate the effectiveness and high measurement accuracy of our scanning system. (C) 2007 Elsevier Ltd. All rights reserved.

an empirical study on bug assignment automation using chinese bug data

Univ SE Calif, Ctr Syst & Software Engn, ABB, Microsoft Res, IEEE, ACMSIGSOFT, N Carolina State Univ Comp Sci

高性能机器人控制系统的研究

本文介绍了高性能机器人控制器的研制情况.该系统具有较高的控制精度,可完成对机器人和多个外部轴的协调控制.为便于国内用户使用,实现了中文界面功能键驱动的汉字编程示教盒.为适应机器人生产线的需要,提供了丰富的联网功能和生产线监控诊断功能.目前该系统已用于新松公司的6kg工业机器人产品中.

蛇形机器人水下蜿蜒运动的仿真研究

该文对中国科学院沈阳自动化所研制的水陆两栖蛇形机器人的水下蜿蜒运动进行受力分析并用ADAMS做了动力学仿真。从关节角函数的幅值、频率和体内形成波的个数三个方面对蛇形机器人前进速度的影响进行了仿真,得出以下结论:存在一个最优关节角函数幅值,使得蛇形机器人前进速度达到最大;增加频率和在满足形成蛇形曲线的体内形成波个数的情况下减少形成波的个数会使机器人前进的速度增加。

冗余度机器人作业区域轨迹的自动规划

机器人化是提高工程机械施工控制自动化的关键问题。对于工程机械机器人 ,特别是具有空间冗余度的工程机械机器人 ,其执行机构末端的轨迹规划的自动实现研究对提高其自动化程度有着重要意义。本文以泵车为例 ,提出了一种泵车布料机构的浇筑过程的自动轨迹规划算法 ,该算法通过将其所浇筑区域离散成浇筑点集 ,对两浇筑点的轨迹利用冗余度机器人学的最小关节范数法 ,并通过在关节速度和加速度非连续之处采用平滑或连续处理 ,从而实现了泵车布料机构浇筑过程的自动轨迹规划。

An Obstacle Cluster Based Data Fusion Method for Mobile Robot

首先给出了一种通过融合多个超声波传感器和一台激光全局定位系统的数据建立机器人环境地图的方法 ,并在此基础上 ,首次提出了机器人在非结构环境下识别障碍物的一种新方法 ,即基于障碍物群的方法 .该方法的最大特点在于它可以更加简洁、有效地提取和描述机器人的环境特征 ,这对于较好地实现机器人的导航、避障 ,提高系统的自主性和实时性是至关重要的 .大量的实验结果表明了该方法的有效性 .

Stabilization of Dynamic Systems for Multiple Omni-Directional Mobile Robots

本文考虑了由2个全方位移动机器人组成的混合动力学系统的协调拟镇定问题.利用机器人位置之间的向量与机器人目标之间向量的内积,设计了多步拟镇定律,该控制律能够在避碰后按指数速率运动到目标点,且在整个过程中两机器人之间的距离不小于避碰的安全距离.最后对2个全方位移动机器人进行了仿真,验证了所给方法的有效性。

水下机器人多功能作业工具包

本文首先阐述了水下机器人作业工具包的重要性 ,重点研究了水下机械手的原理、功能及两种主要结构 .并以沈阳自动化所研制的缆控水下机器人为背景 ,讨论了水下作业工具包的一些专用工具的原理及其结构

海洋救助机器人用钕铁硼永磁直流电动机设计

为中科院沈阳自动化研究所机器人中心研制了海洋救助机器人推进器用钕铁硼永磁直流电动机.针对该电动机设计的特殊性,重点论述电动机功率、电压、转速及主要尺寸的确定方法,主磁极、换向器和电刷装置的设计方法,对电动机的结构特点、电磁性能和实验结果也作了介绍.

空间冗余度机器人最小关节力矩的轨迹规划

许多工程机械的工作装置属于冗余度机器人的范畴 ,该类机械施工控制自动化所涉及到的轨迹规划问题 ,一直受到人们的重视·采用冗余度机器人运动学的最小关节力矩法 ,对空间4R冗余度机器人的关节轨迹的运动规划进行了分析仿真·实验表明该方法实际可行 ,运动学和动力学的工作特性良好·

机器人及机器人学中的控制问题

机器人已成为进一步实现制造业、非制造业、军事活动以至家庭服务自动化的重要工具.机器人学则是更综合地研究如何使机器或系统具有“思想、感知或动作功能的一门交叉性新学科”.机器人的发展是波浪式的,经历了多次的曲折.目前工业机器人中除装配机器人外,其他点焊、弧焊、喷漆及搬运机器人,由于应用范围限制,以及工业生产装备更新速度和投资规模的影响,市场日趋饱和.以美国为例.制造商订单1984年达到高峰6046台.至1986年下降至5713台,不过对机器人未来市场大都持乐观态度.但进一步开拓市场.有待于推出适用于各种环境作业的各式各样的机器人.日本东京大学教授认为机器人当前处于又一次高潮的前夜(Nightmare),正是需要大力加强研究开发的时期.我国正在着手建立工业机器人产业,这一情况值得我们注意.本文着重从研究角度来介绍当前机器人及机器人学中的控制问题的现状及主要问题.