Investigation of Mn-Implanted n-Si by Low-Energy Ion Beam Deposition

Mn ions were implanted to n-type Si(0 0 1) single crystal by low-energy ion beam deposition technique with an energy of 1000 eV and a dose of 7.5 x 10^{17} cm^{-2}. The samples were held at room temperature and at 300degreesC during implantation. Auger electron spectroscopy depth profiles of samples indicate that the Mn ions reach deeper in the sample implanted at 300degreesC than in the sample implanted at room temperature. X-ray diffraction measurements show that the structure of the sample implanted at room temperature is amorphous while that of the sample implanted at 300degreesC is crystallized. There are no new phases found except silicon both in the two samples. Atomic force microscopy images of samples indicate that the sample implanted at 300degreesC has island-like humps that cover the sample surface while there is no such kind of characteristic in the sample implanted at room temperature. The magnetic properties of samples were investigated by alternating gradient magnetometer (AGM). The sample implanted at 300degreesC shows ferromagnetic behavior at room temperature.

Mn注入n型Ge单晶的特性研究

采用离子能量为100keV,剂量为3×1016cm-2的离子注入技术,室温下往n型Ge(111)单晶衬底注入Mn+离子,注入后的样品进行400℃热处理。利用X-射线衍射法(XRD)和原子力显微镜(AFM)对注入后的样品进行了结构和形貌分析,俄歇电子能谱法(AES)进行了组分分析,交变梯度样品磁强计(AGM)进行了室温磁性测量。结果表明原位注入样品的结构是非晶的,热处理后发生晶化现象。没有在样品中观察到新相形成。Mn离子较深的注入进Ge衬底,在120nm处Mn原子百分比浓度达到最高为8%。热处理后的样品表现出了室温铁磁特性。

低能离子束制备(Ga,Gd,As)薄膜

室温条件下 ,用离子束外延设备制备 ( Ga,Gd,As)样品 ,X射线衍射 ( XRD)结果表明除了 Ga As衬底峰 ,没有发现其他新相的衍射峰。俄歇电子能谱 ( AES)分析了样品中元素随深度的变化 ,不同样品中元素的分布有着不同的特点。并运用原子力显微镜 ( AFM)研究了样品表面的形貌特点 ,表明样品表面的粗糙度与 Gd注入过程中在样品表面沉积的多少有关。运用交变梯度磁强计 ( AGM)对薄膜进行磁性分析 ,结果表明有的样品在室温条件下出现铁磁性 ,但金属钆本身具有室温铁磁性 ,因而需要进一步分析。

低能离子束方法制备磁性Fe-Si合金薄膜

　利用质量分离的低能离子束技术,获得了磁性Fe Si合金薄膜。利用俄歇电子能谱法(AES)、X射线衍射法(XRD)以及交变梯度样品磁强计(AGM)测试了样品的组分、结构以及磁特性。测试结果表明在室温下制备的Fe Si合金是Fe组分渐变的非晶薄膜,具有室温铁磁性。当衬底温度为300℃时制备的非晶Fe Si薄膜中有Fe硅化物FeSi相产生,样品的铁磁性被抑制。

Investigation of Mn-implanted n-Si by low-energy ion beam deposition

Mn ions were implanted to n-type Si(0 0 1) single crystal by low-energy ion beam deposition technique with an energy of 1000 eV and a dose of 7.5 x 10(17) cm(-2). The samples were held at room temperature and at 300degreesC during implantation. Auger electron spectroscopy depth profiles of samples indicate that the Mn ions reach deeper in the sample implanted at 300degreesC than in the sample implanted at room temperature. X-ray diffraction measurements show that the structure of the sample implanted at room temperature is amorphous while that of the sample implanted at 300degreesC is crystallized. There are no new phases found except silicon both in the two samples. Atomic force microscopy images of samples indicate that the sample implanted at 300degreesC has island-like humps that cover the sample surface while there is no such kind of characteristic in the sample implanted at room temperature. The magnetic properties of samples were investigated by alternating gradient magnetometer (AGM). The sample implanted at 300degreesC shows ferromagnetic behavior at room temperature. (C) 2004 Elsevier BN. All rights reserved.

Mn注入 n型 Ge单晶的特性研究

采用离子能量为 100keV,剂量为 3× 1016cm- 2的离子注入技术,室温下往 n型 Ge( 111)单晶 衬底注入 Mn+离子,注入后的样品进行 400℃热处理.利用 X-射线衍射法 (XRD)和原子力显微 镜( AFM)对注入后的样品进行了结构和形貌分析, 俄歇电子能谱法 (AES)进行了组分分析,交变 梯度样品磁强计( AGM)进行了室温磁性测量.结果表明原位注入样品的结构是非晶的,热处理后 发生晶化现象.没有在样品中观察到新相形成. Mn离子较深的注入进 Ge衬底,在 120 nm处 Mn原子百分比浓度达到最高为 8%.热处理后的样品表现出了室温铁磁特性.

低能离子束方法制备磁性Fe-Si合金薄膜

利用质量分离的低能离子束技术,获得了磁性Fe-Si合金薄膜.利用俄歇电子能谱法(AES)、X射线衍射法(XRD)以及交变梯度样品磁强计(AGM)测试了样品的组分、结构以及磁特性.测试结果表明在室温下制备的Fe-Si合金是Fe组分渐变的非晶薄膜,具有室温铁磁性.当衬底温度为300℃时制备的非晶Fe-Si薄膜中有Fe硅化物FeSi相产生,样品的铁磁性被抑制.

低能离子束制备(Ga,Gd,As)薄膜

室温条件下,用离子束外延设备制备(Ga,Gd,As)样品,X射线衍射(XRD)结果表明除了GaAs衬底峰,没有发现其他新相的衍射峰.俄歇电子能谱(AES)分析了样品中元素随深度的变化,不同样品中元素的分布有着不同的特点.并运用原子力显微镜(AFM)研究了样品表面的形貌特点,表明样品表面的粗糙度与Gd注入过程中在样品表面沉积的多少有关.运用交变梯度磁强计(AGM)对薄膜进行磁性分析,结果表明有的样品在室温条件下出现铁磁性,但金属钆本身具有室温铁磁性,因而需要进一步分析.