Engineer-to-order -toimitusketjun kilpailutekijät ja niiden suorituskyvyn mittaaminen

Kandidaatintyön tavoitteena on tutkia engineer-to-order -toimitusketjun tyypillisiä tärkeimpiä kilpailutekijöitä sekä esittää esimerkkiratkaisu siitä, millaisella suorituskyvyn mittaristolla engineer-to-order toimitusketjua voidaan ohjata kohti tärkeimpien kilpailutekijöiden vahvistamista. Työssä luodaan katsaus ETO -ympäristön erityispiirteisiin ja esitetään tekijöitä, joita suorituskyvyn mittaamisessa tulisi huomioida tässä ympäristössä.

Supply chain costs of a small board lot: sheet cutting and logistics

Succeeding in small board lot (0-20 tons) deliveries, is not always prosperous and failures as well as extra costs compared to standard costs arise. Failure deliveries from converting plants to customer locations tie a lot of unwanted and unexpected costs. Extra costs are handled as quality costs and more precise, internal failure costs. These costs revolve from unsuccessful truck payloads, redundant warehousing or unfavorable routing as examples. Quality costs are becoming more and more important factor in company’s financial decision making. Actual, realized truck payload correlates with the extra costs occurring, so filling the truck payload all get-out well is a key to lower the extra costs. Case company in this study is Corporation A, business segment Boards. Boards have outsourced half of their converting in order to gain better customer service via flexibility, lead time reductions and logistics efficiency improvements. Examination period of the study is first two quarters of year 2008 and deliveries examined are from converters to the customer locations. In Corporation A’s case, the total loss in failure deliveries is hundreds of thousands of Euros during the examination period. So, the logistics goal of getting the right product to the right place and right time for the least cost, does not completely realize.

Automated Purchase to Pay Process Value Modeling and Comparative Process Speeds

The importance of efficient supply chain management has increased due to globalization and the blurring of organizational boundaries. Various supply chain management technologies have been identified to drive organizational profitability and financial performance. Organizations have historically been concentrating heavily on the flow of goods and services, while less attention has been dedicated to the flow of money. While supply chains are becoming more transparent and automated, new opportunities for financial supply chain management have emerged through information technology solutions and comprehensive financial supply chain management strategies. This research concentrates on the end part of the purchasing process which is the handling of invoices. Efficient invoice processing can have an impact on organizations working capital management and thus provide companies with better readiness to face the challenges related to cash management. Leveraging a process mining solution the aim of this research was to examine the automated invoice handling process of four different organizations. The invoice data was collected from each organizations invoice processing system. The sample included all the invoices organizations had processed during the year 2012. The main objective was to find out whether e-invoices are faster to process in an automated invoice processing solution than scanned invoices (post entry into invoice processing solution). Other objectives included looking into the longest lead times between process steps and the impact of manual process steps on cycle time. Processing of invoices from maverick purchases was also examined. Based on the results of the research and previous literature on the subject, suggestions for improving the process were proposed. The results of the research indicate that scanned invoices were processed faster than e-invoices. This is mostly due to the more complex processing of e-invoices. It should be noted however that the manual tasks related to turning a paper invoice into electronic format through scanning are ignored in this research. The transitions with the longest lead times in the invoice handling process included both pre-automated steps as well as manual steps performed by humans. When the most common manual steps were examined in more detail, it was clear that these steps had a prolonging impact on the process. Regarding invoices from maverick purchases the evidence shows that these invoices were slower to process than invoices from purchases conducted through e-procurement systems and from preferred suppliers. Suggestions on how to improve the process included: increasing invoice matching, reducing of manual steps and leveraging of different value added services such as invoice validation service, mobile solutions and supply chain financing services. For companies that have already reaped all the process efficiencies the next step is to engage in collaborative financial supply chain management strategies that can benefit the whole supply chain.

Improving the Supply Chain Performance Management System in a Finnish paper mill

This Master’s Thesis studies performance management system and its benefits, risks and costs. Objective of the thesis is to describe and evaluate currently used supply chain performance management system (SCPMS) in a Finnish paper mill and its interfaces with its business unit’s SCPMS. As a result, the host company has improvement road map for improving its SCPMS. Used SCPMS in the host company and its interfaces to business unit’s SCPMS are described based on interviews held in the host company and the business unit. Evaluation of the host company’s SCPMS is based on literature study. For improvement road map, three areas in need of improvements are chosen. The study shows the need of high level top management commitment in successful performance management system implementation and usage, especially when the system is deployed to lower levels in the organization.

The demand-supply balancing process in supply chain management - case mining & metals industry equipment

The aim of this thesis is to search how to match the demand and supply effectively in industrial and project-oriented business environment. The demand-supply balancing process is searched through three different phases: the demand planning and forecasting, synchronization of demand and supply and measurement of the results. The thesis contains a single case study that has been implemented in a company called Outotec. In the case study the demand is planned and forecasted with qualitative (judgmental) forecasting method. The quantitative forecasting methods are searched further to support the demand forecast and long term planning. The sales and operations planning process is used in the synchronization of the demand and supply. The demand forecast is applied in the management of a supply chain of critical unit of elemental analyzer. Different meters on operational and strategic level are proposed for the measurement of performance.

Green supply chain management practices and firm performance: evidence from Finland

In order to address the increasing stakeholder requirements for environmentally sustainable products and processes, firms often need the participation of their supply chain partners. Green supply chain management has emerged as a set of managerial practices that integrate environmental issues into supply chain management. If implemented successfully, green supply chain management can be a way to achieve competitive advantage while enhancing the environmental sustainability of the firm. The overall purpose of this dissertation is to contribute to the discussion on green supply chain management practices from the perspective of their drivers and performance implications. The theoretical background arises from the literature on competitive strategy, firm performance and green supply chain management. The research questions are addressed by analysing firm-level data from manufacturing, trading and logistics firms operating in Finland. The empirical data comes from two consecutive Finland State of Logistics surveys in 2012 and 2014, combined with financial reporting data from external databases. The data is analysed with multiple statistical methods. First, the thesis contributes to the discussion of the drivers of GSCM practices. To enhance the understanding of the relationship between competitive strategy and GSCM practices, a conceptual tool to describe generic competitive strategy approaches was developed. The findings suggest that firms pursuing marketing differentiation are more likely to be able to compete by having only small environmental effects and by adopting a more advanced form of external green supply chain management, such as a combination of strong environmental collaboration and the increased environmental monitoring of suppliers. Furthermore, customer requirements for environmental sustainability are found to be an important driver in the implementation of internal GSCM practices. Firms can respond to this customer pressure by passing environmental requirements on to their suppliers, either through environmental collaboration or environmental monitoring. Second, this thesis adds value to the existing literature on the effects of green supply chain management practices on firm performance. The thesis provides support for the idea that there is a positive relationship between GSCM practices and firm performance and enhances the understanding of how different types of GSCM practices are related to 1) financial, 2) operational and 3) environmental performance in manufacturing and logistics. The empirical results suggest that while internal GSCM practices have the strongest effect on environmentalperformance, environmental collaboration with customers seems to be the most effective way to improve financial performance. In terms of operational performance, the findings were more mixed, suggesting that the operational performance of firms is more likely to be affected by firm characteristics than by the choices they make regarding their environmental collaboration. This thesis is also one of the first attempts to empirically analyse the relationship between GSCM practices and performance among logistics service providers. The findings also have managerial relevance. Management, especially in manufacturing and logistics industries, may benefit by gaining knowledge about which types of GSCM practice could provide the largest benefits in terms of different performance dimensions. This thesis also has implications for policy-makers and regulators regarding how to promote environmentally friendly activities among 1) manufacturing; 2) trading; and 3) logistics firms.

Toimitusketjun materiaalihankinnan kehittäminen ja johtaminen

Tämän työn päätavoite on luoda toimintamalli alihankintaostoille siten, että alihankkijat voisivat käyttää materiaaliostoissaan päätoimittajan materiaalisopimuksia. Päätavoite voidaan jakaa osatavoitteisiin, joita ovat ennustemallin luominen materiaalitoimittajalle, käsittäen pituusleikkureiden raskaat rakenteet, tilaus-toimitusprosessi välille päätoimittaja-alihankkija materiaalitoimittaja ja kustannussäästöjen saavuttaminen toimitusketjussa. Työssä keskityttiin pituusleikkureiden raskaiden rakenteiden toimitusketjuun yhden alihankkijan ja materiaalitoimittajan kanssa. Raskaat rakenteet määriteltiin käsittämän teräslevyjä, jotka ovat yli 16 mm paksuudeltaan. Uutta toimintamallia lähdettiin kehittämään päätoimittajan tarpeiden pohjalta. Mukaan otettiin, myös alihankkijan ja materiaalitoimittajan tarpeita. Uusi toimintamalli sisältää ennustemallin ja uuden tilaus-toimitusprosessin. Uuden toimintamallin käyttöönotto kuitenkin keskeytyi matalasta kuormitustilanteesta johtuen. Saatuja tuloksia verrattiin osin teoriassa esitettyihin asioihin.

Henkilöstövoimavarojen strateginen johtaminen toimitusketjussa

Tutkielman aiheena on henkilöstövoimavarojen strateginen johtaminen toimitusketjussa. Tavoitteena on selvittää henkilöstövoimavarojen johtamisen ja toimitusketjujen hallinnan välistä suhdetta ja sitä, minkälaisilla henkilöstöresurssien hallinnan keinoilla voidaan tehostaa yrityksen toimitusketjuja ja parantaa sen kilpailukykyä markkinoilla. Tutkimuksessa on otettu huomioon myös liiketoimintaympäristön jatkuvasti muuttuvan luonteen vaikutus organisaatioiden henkilöstöresurssien ja toimitusketjujen hallintaan. Tavoitteena on lisäksi kartoittaa ne johtajien ja hankinnan ammattilaisten ominaispiirteet, jotka ovat edellytyksenä tuloksekkaaseen toimintaan modernissa liiketoiminnassa. Tutkimus on luonteeltaan kvalitatiivinen eli laadullinen tutkimus ja siinä on käytetty hyväksi teoriatriangulaation menetelmää kuvailtaessa toimitusketjuja henkilöstövoimavarojen keinoin. Tutkimuksessa muodostetaan henkilöstöresurssien hallinnan ja toimitusketjujen hallinnan teoriakokonaisuuksista synteesi, joka kuvaa niitä henkilöstöstrategisia erityispiirteitä, joita toimitusketjujen hallintaan sisältyy.

Johtaminen on työyhteisön hyvinvoinnin avaintekijä

Teksti perustuu Pauli Juuren ja Antti Vuorelan teokseen: Johtaminen ja työyhteisön hyvinvointi. PS-kustannus, Aavaranta-sarja 2002.