Soveltuvuuskokeella täydennetty opiskelijavalinta : Seurantatutkimus eräiden sosiaali- ja terveysalan teknisluonteisten koulutusohjelmien (apuvälinetekniikka, hammastekniikka ja optometria) opiskelijavalinnan toteuttamisesta

Aptitude-based student selection: A study concerning the admission processes of some technically oriented healthcare degree programmes in Finland (Orthotics and Prosthetics, Dental Technology and Optometry). The data studied consisted of conveniencesamples of preadmission information and the results of the admission processes of three technically oriented healthcare degree programmes (Orthotics and Prosthetics, Dental Technology and Optometry) in Finland during the years 1977-1986 and 2003. The number of the subjects tested and interviewed in the first samples was 191, 615 and 606, and in the second 67, 64 and 89, respectively. The questions of the six studies were: I. How were different kinds of preadmission data related to each other? II. Which were the major determinants of the admission decisions? III. Did the graduated students and those who dropped out differ from each other? IV. Was it possible to predict how well students would perform in the programmes? V. How was the student selection executed in the year 2003? VI. Should clinical vs. statistical prediction or both be used? (Some remarks are presented on Meehl's argument: "Always, we might as well face it, the shadow of the statistician hovers in the background; always the actuary will have the final word.") The main results of the study were as follows: Ability tests, dexterity tests and judgements of personality traits (communication skills, initiative, stress tolerance and motivation) provided unique, non-redundant information about the applicants. Available demographic variables did not bias the judgements of personality traits. In all three programme settings, four-factor solutions (personality, reasoning, gender-technical and age-vocational with factor scores) could be extracted by the Maximum Likelihood method with graphical Varimax rotation. The personality factor dominated the final aptitude judgements and very strongly affected the selection decisions. There were no clear differences between graduated students and those who had dropped out in regard to the four factors. In addition, the factor scores did not predict how well the students performed in the programmes. Meehl's argument on the uncertainty of clinical prediction was supported by the results, which on the other hand did not provide any relevant data for rules on statistical prediction. No clear arguments for or against the aptitude-based student selection was presented. However, the structure of the aptitude measures and their impact on the admission process are now better known. The concept of "personal aptitude" is not necessarily included in the values and preferences of those in charge of organizing the schooling. Thus, obviously the most well-founded and cost-effective way to execute student selection is to rely on e.g. the grade point averages of the matriculation examination and/or written entrance exams. This procedure, according to the present study, would result in a student group which has a quite different makeup (60%) from the group selected on the basis of aptitude tests. For the recruiting organizations, instead, "personal aptitude" may be a matter of great importance. The employers, of course, decide on personnel selection. The psychologists, if consulted, are responsible for the proper use of psychological measures.

Ekologisuus saaristolaiskäsityössä : Käsityöläisten luomia merkityksiä etsimässä

Tutkimuksessa etsittiin vastauksia kysymykseen, miten saariston tekstiilikäsityöläinen tavoittelee ekologista kestävyyttä työssään. Mitä ekologisuus hänelle merkitsee ja miten se ilmenee hänen töissään? Kertojana on sekä tuote että tekijä. Tutkimus on fenomenologisesti orientoitunut ja vastauksia tutkimuskysymyksiin haettiin teorian ja aineiston vuoropuhelulla . Analyysimenetelmänä käytettiin sisällön analyysia. Analysoitava aineisto on hankittu haastattelemalla yhdeksää käsityöläistä, jotka asuvat Lounais-Suomen, Ahvenanmaan ja Tukholman alueen saaristoissa. Tutkimuksen teoreettisissa lähtökohdissa on tarkasteltu kestävän kehityksen ja saariston käsityön suhdetta. Kulttuuriseen, sosiaaliseen, taloudelliseen ja tuotannolliseen kestävyyteen panostamalla pyritään ekologiseen kestävyyteen. Käsityöläisen arvot, taidot ja tiedot vaikuttavat kehityksen eri osa-alueilla. Käsityöläisen toimintaympäristönä oli saaristo, sen luonto ja ihmisen aikaansaama kulttuuri. Tutkimuksessa selvitettiin sitä, miten saaristo ja saaristolaisuus vaikuttivat käsityöläisen tapaan toimia ja kertoa tekemistään tuotteista. Ekologisuus saaristolaiskäsityössä ilmeni monin tavoin. Kulttuurinen ja sosiaalinen kestävyys toteutuivat taloudellista ja tuotannollista kestävyyttä paremmin. Koulutuksen koettiin olevan paras keino saavuttaa välitavoitteita kestävässä kehityksessä. Käsityöläisyys nähtiin osana saaristolaiskulttuuria ja verkostoituminen harvaan asutulla seudulla koettiin tärkeäksi. Tutkimuksessa pohdittiin, onko ekologisuus materiaalin alkuperään, työtapaan vai tuotteen käyttöikään ja hävitykseen liittyvä asia. Ekologisuus yhdistettiin usein käsityön materiaaliin ja sen tuotantotapoihin. Arvot konkretisoituvat käsityöläisen puhuessa perheestään ja kasvamisesta käsityöläisyyteen. Ekologiseen käsityöhön panostaminen on myös osa käsityöläisen kasvuprosessia. Ekologiseen kestävyyteen pyrkiminen käsityössä herätti myös ristiriitaisia tunteita. Käsityöläisyys on elinkeino markkinoilla, joilla globaali kauppa määrittelee säännöt. Merkitseekö ekologiseen kestävyyteen pyrkiminen kurkottamista kohti totuutta? Avainsanat: ekologinen kestävyys, kestävä kehitys, arvot, käsityöläisyys, käsityö, saaristo saaristolaisuus

Rhizoctonia solani as a potato pathogen : Variation of isolates in Finland and host response

Rhizoctonia solani is a soil inhabiting basidiomycetous fungus able to induce a wide range of symptoms in many plant species. This genetically complex species is divided to 13 anastomosis groups (AG), of which AG-3 is specialized to infect potato. However, also a few other AGs are able to infect or live in close contact with potato. On potato, R. solani infection causes two main types of diseases including stem canker observed as a dark brown lesions on developing stems and stolons, and black scurf that develops on new tubers close to the time of harvest. These disease symptoms are collectively called a ‘Rhizoctonia disease complex’. Between the growing seasons R. solani survives in soil and plant debri as sclerotia or as the sclerotia called black scurf on potato tubers which when used as seed offer the main route for dispersal of the fungus to new areas. The reasons for the dominance of AG-3 on potato seem to be attributable to its highly specialization to potato and its ability to infect and form sclerotia efficiently at low temperatures. In this study, a large nationwide survey of R. solani isolates was made in potato crops in Finland. Almost all characterized isolates belonged to AG-3. Additionally, three other AGs (AG-2-1, AG-4 and AG-5) were found associated with symptoms on potato plants but they were weaker pathogens on potato than AG-3 as less prone to form black scurf. According to phylogenetic analysis of the internal transcribed sequences (ITS) of the ribosomal RNA genes the Finnish AG-3 isolates are closely related to each other even though a wide variation of physiological features was observed between them. Detailed analysis of the ITS regions revealed single nucleotide polymorphism in 14 nucleotide positions of ITS-1 and ITS-2. Additionally, compensatory base changes on ITS-2 were detected which suggests that potato-infecting R. solani AG-3 could be considered as a separate species instead of an AG of R. solani. For the first time, molecular defence responses were studied and detected during the early phases of interaction between R. solani AG-3 and potato. Extensive systemic signalling for defence exploiting several known defence pathways was activated as soon as R. solani came into close contact with the base of a sprout. The defence response was strong enough to protect vulnerable sprout tips from new attacks by the pathogen. These results at least partly explain why potato emergence is eventually successful even under heavy infection pressure by R. solani.

Late Transition Metal and Aluminum Complexes for the Polymerization of Ethene and Acrylates

Polyethene, polyacrylates and polymethyl acrylates are versatile materials that find wide variety of applications in several areas. Therefore, polymerization of ethene, acrylates and methacrylates has achieved a lot attention during past years. Numbers of metal catalysts have been introduced in order to control the polymerization and to produce tailored polymer structures. Herein an overview on the possible polymerization pathways for ethene, acrylates and methacrylates is presented. In this thesis iron(II) and cobalt(II) complexes bearing tri- and tetradentate nitrogen ligands were synthesized and studied in the polymerization of tertbutyl acrylate (tBA) and methyl methacrylate (MMA). Complexes are activated with methylaluminoxane (MAO) before they form active combinations for polymerization reactions. The effect of reaction conditions, i.e. monomer concentration, reaction time, temperature, MAO to metal ratio, on activity and polymer properties were investigated. The described polymerization system enables mild reaction conditions, the possibility to tailor molar mass of the produced polymers and provides good control over the polymerization. Moreover, the polymerization of MMA in the presence of iron(II) complex with tetradentate nitrogen ligands under conditions of atom transfer radical polymerization (ATRP) was studied. Several manganese(II) complexes were studied in the ethene polymerization with combinatorial methods and new active catalysts were found. These complexes were also studied in acrylate and methacrylate polymerizations after MAO activation and converted into the corresponding alkyl (methyl or benzyl) derivatives. Combinatorial methods were introduced to discover aluminum alkyl complexes for the polymerization of acrylates and methacrylates. Various combinations of aluminum alkyls and ligands, including phosphines, salicylaldimines and nitrogen donor ligands, were prepared in situ and utilized to initiate the polymerization of tBA. Phosphine ligands were found to be the most active and the polymerization MMA was studied with these active combinations. In addition, a plausible polymerization mechanism for MMA based on ESI-MS, 1H and 13C NMR is proposed.

Substance flow analysis in Finland : Four case studies on N and P flows

Nitrogen (N) and phosphorus (P) are essential elements for all living organisms. However, in excess, they contribute to several environmental problems such as aquatic and terrestrial eutrophication. Globally, human action has multiplied the volume of N and P cycling since the onset of industrialization. The multiplication is a result of intensified agriculture, increased energy consumption and population growth. Industrial ecology (IE) is a discipline, in which human interaction with the ecosystems is investigated using a systems analytical approach. The main idea behind IE is that industrial systems resemble ecosystems, and, like them, industrial systems can then be described using material, energy and information flows and stocks. Industrial systems are dependent on the resources provided by the biosphere, and these two cannot be separated from each other. When studying substance flows, the aims of the research from the viewpoint of IE can be, for instance, to elucidate the ways how the cycles of a certain substance could be more closed and how the flows of a certain substance could be decreased per unit of production (= dematerialization). In Finland, N and P are studied widely in different ecosystems and environmental emissions. A holistic picture comparing different societal systems is, however, lacking. In this thesis, flows of N and P were examined in Finland using substance flow analysis (SFA) in the following four subsystems: I) forest industry and use of wood fuels, II) food production and consumption, III) energy, and IV) municipal waste. A detailed analysis at the end of the 1990s was performed. Furthermore, historical development of the N and P flows was investigated in the energy system (III) and the municipal waste system (IV). The main research sources were official statistics, literature, monitoring data, and expert knowledge. The aim was to identify and quantify the main flows of N and P in Finland in the four subsystems studied. Furthermore, the aim was to elucidate whether the nutrient systems are cyclic or linear, and to identify how these systems could be more efficient in the use and cycling of N and P. A final aim was to discuss how this type of an analysis can be used to support decision-making on environmental problems and solutions. Of the four subsystems, the food production and consumption system and the energy system created the largest N flows in Finland. For the creation of P flows, the food production and consumption system (Paper II) was clearly the largest, followed by the forest industry and use of wood fuels and the energy system. The contribution of Finland to N and P flows on a global scale is low, but when compared on a per capita basis, we are one of the largest producers of these flows, with relatively high energy and meat consumption being the main reasons. Analysis revealed the openness of all four systems. The openness is due to the high degree of internationality of the Finnish markets, the large-scale use of synthetic fertilizers and energy resources and the low recycling rate of many waste fractions. Reduction in the use of fuels and synthetic fertilizers, reorganization of the structure of energy production, reduced human intake of nutrients and technological development are crucial in diminishing the N and P flows. To enhance nutrient recycling and replace inorganic fertilizers, recycling of such wastes as wood ash and sludge could be promoted. SFA is not usually sufficiently detailed to allow specific recommendations for decision-making to be made, but it does yield useful information about the relative magnitude of the flows and may reveal unexpected losses. Sustainable development is a widely accepted target for all human action. SFA is one method that can help to analyse how effective different efforts are in leading to a more sustainable society. SFA's strength is that it allows a holistic picture of different natural and societal systems to be drawn. Furthermore, when the environmental impact of a certain flow is known, the method can be used to prioritize environmental policy efforts.

The effect of lignin content and lignin modification on Norway spruce wood properties and decay resistance

Three different Norway spruce cutting clones growing in three environments with different soil and climatic conditions were studied. The purpose was to follow variation in the radial growth rate, wood properties and lignin content and to modify wood lignin with a natural monolignol, coniferyl alcohol, by making use of inherent wood peroxidases. In addition, the incorporation of chlorinated anilines into lignin was studied with synthetic model compounds and synthetic lignin preparations to show whether unnatural compounds originating from pesticides could be bound in the lignin polymer. The lignin content of heartwood, sapwood and earlywood was determined by applying Fourier transform infrared (FTIR) spectroscopy and a principal component regression (PCR) technique. Wood blocks were treated with coniferyl alcohol by using a vacuum impregnation method. The effect of impregnation was assessed by FTIR and by a fungal decay test. Trees from a fertile site showed the highest growth rate and sapwood lignin content and the lowest latewood proportion, weight density and modulus of rupture (MOR). Trees from a medium fertile site had the lowest growth rate and the highest latewood proportion, weight density, modulus of elasticity (MOE) and MOR. The most rapidly growing clone showed the lowest latewood proportion, weight density, MOE and MOR. The slowest growing clone had the lowest sapwood lignin content and the highest latewood proportion, weight density, MOE and MOR. Differences between the sites and clones were small, while fairly large variation was found between the individual trees and growing seasons. The cutting clones maintained clone-dependent wood properties in the different growing sites although variation between trees was high and climatic factors affected growth. The coniferyl alcohol impregnation increased the content of different lignin-type phenolic compounds in the wood as well as wood decay resistance against a white-rot fungus, Coriolus versicolor. During the synthetic lignin preparation 3,4-dichloroaniline became bound by a benzylamine bond to β-O-4 structures in the polymer and it could not be released by mild acid hydrolysis. The natural monolignol, coniferyl alcohol, and chlorinated anilines could be incorporated into the lignin polymer in vivo and in vitro, respectively.

Streptomyces scabies and S. turgidiscabies as pathogens causing potato common scab, and potential methods for their control

Tieteellinen tiivistelmä Common scab is one of the most important soil-borne diseases of potato (Solanum tuberosum L.) in many potato production areas. It is caused by a number of Streptomyces species, in Finland the causal agents are Streptomyces scabies (Thaxter) Lambert & Loria and S. turgidiscabies Takeuchi. The scab-causing Streptomyces spp. are well-adapted, successful plant pathogens that survive in soil also as saprophytes. Control of these pathogens has proved to be difficult. Most of the methods used to manage potato common scab are aimed at controlling S. scabies, the most common of the scab-causing pathogens. The studies in this thesis investigated S. scabies and S. turgidiscabies as causal organisms of common scab and explored new approaches for control of common scab that would be effective against both species. S. scabies and S. turgidiscabies are known to co-occur in the same fields and in the same tuber lesions in Finland. The present study showed that both these pathogens cause similar symptoms on potato tubers, and the types of symptoms varied depending on cultivar rather than the pathogen species. Pathogenic strains of S. turgidiscabies were antagonistic to S. scabies in vitro indicating that these two species may be competing for the same ecological niche. In addition, strains of S. turgidiscabies were highly virulent in potato and they tolerated lower pH than those of S. scabies. Taken together these results suggest that S. turgidiscabies has become a major problem in potato production in Finland. The bacterial phytotoxins, thaxtomins, are produced by the scab-causing Streptomyces spp. and are essential for the induction of scab symptoms. In this study, thaxtomins were produced in vitro and four thaxtomin compounds isolated and characterized. All four thaxtomins induced similar symptoms of reduced root and shoot growth, root swelling or necrosis on micro-propagated potato seedlings. The main phytotoxin, thaxtomin A, was used as a selective agent in a bioassay in vitro to screen F1 potato progeny from a single cross. Tolerance to thaxtomin A in vitro and scab resistance in the field were correlated indicating that the in vitro bioassay could be used in the early stages of a resistance breeding program to discard scab-susceptible genotypes and elevate the overall levels of common scab resistance in potato breeding populations. The potential for biological control of S. scabies and S. turgidiscabies using a non-pathogenic Streptomyces strain (346) isolated from a scab lesion and S. griseoviridis strain (K61) from a commercially available biocontrol product was studied. Both strains showed antagonistic activity against S. scabies and S. turgidiscabies in vitro and suppressed the development of common scab disease caused by S. turgidiscabies in the glasshouse. Furthermore, strain 346 reduced the incidence of S. turgidiscabies in scab lesions on potato tubers in the field. These results demonstrated for the first time the potential for biological control of S. turgidiscabies in the glasshouse and under field conditions and may be applied to enhance control of common scab in the future.

KAUPPAKESKUS OSANA KESTÄVÄÄ KAUPUNKIRAKENNETTA - Kauppakeskustoimijoiden näkemyksiä kauppakeskusten sijoittumisen kestävyydestä

The location and location guidance of shopping centers has been under much public discussion in Finland in the recent years. The Ministry of the Environment has expressed concern over the sustainability of ‘out-of-town’ shopping centers. Shopping centers outside the urban form are seen to cause more traffic, thus contributing to climate change by increasing carbon dioxide emissions. The sustainability of urban form has been researched in several studies and factors like urban density, public transport and a comfortable living environment were found to be the most important. This study presents the views of Finnish shopping center stakeholders on the sustainability of shopping center locations. These views were gathered using focus groups. Stakeholders included managers, consultants, investors, developers, architects and tenants of shopping centers and public sector actors dealing with shopping industry. As one theme in the discussions, participants were asked to present their views on the sustainability of shopping centers’ current locations. The study is part of the Aalto University of Technology KOKKKA project, which has its main focus upon shopping centers and sustainability. Shopping centers were seen to affect sustainability mainly through their location. A sustainable location was thought of as one that involved locating in an economically successful place, inside the urban form. A sustainable location was also easily accessible, with good access via public transport and the shopping center also had to create comfortable living environment in its surroundings. The views of the focus groups participants are similar to the views in sustainable urban structure theories and, inter alia, Finland’s national sustainable development strategy.

Resistance responses blocking systemic movement of Potato virus A in potato

Peruna kestää A-virusta estämällä sen leviämistä Peruna on maissin ohella maailman kolmanneksi tärkein ravintokasvi vehnän ja riisin jälkeen. Perunaa lisätään kasvullisesti mukuloita istuttamalla, jolloin virukset siirtyvät sairaiden siemenmukuloiden välityksellä kasvukaudesta toiseen. Virustauteja voi torjua ainoastaan terveen siemenperunan ja kestävien lajikkeiden avulla. Kestävyys perustuu usein siihen, että kasvi estää viruksen leviämisen tartuntakohdasta välttyäkseen virustaudilta. Tässä työssä tutkittiin kolmea perunan A-viruksen (PVA) liikkumista estävää kestävyysmekanismia perunassa. Lisäksi työn kokeelliseen osaan oleellisesti kuuluvaa virustartutusta varten kehitettiin uusi paranneltu versio geenipyssystä. Tämä itse rakennettu laite optimoitiin PVA:n tartuttamiseen mahdollisimman helposti ja pienin käyttökustannuksin. Tutkimuksen kohteena olleessa perunan risteytysjälkeläistössä oli PVA:ta kestäviä kasveja (ryhmä nnr), jotka estivät viruksen liikkumisen aiheuttamatta oireita tartutuskohdassa, sekä kasveja, joissa PVA aiheutti kuolioläikkinä näkyvän yliherkkyysvasteen (ryhmä HR). Molemmissa kestävyystyypeissä virus pystyi monistumaan ja leviämään solusta soluun paikallisesti, mutta liikkuminen muihin kasvinosiin nilan kautta estyi. Ryhmän nnr kasveissa PVA-tartunta ei aiheuttanut tilastollisesti merkitsevää muutosta useimpien geenien ilmenemiseen tartuntakohdassa. Ainoastaan geeniperhe, joka ilmentää tiettyä proteinaasi-inhibiittoria (PI), reagoi PVA:han 24 tuntia tartutuksesta. Kun tämän PVA:han reagoivan geeniperheen jäsenet hiljennettiin nnr- perunalinjoissa, ne muuttuivat alttiiksi PVA:lle ja virus levisi tartuntakohdasta muihin kasvinosiin. Tulos osoittaa, että PI on viruskestävyystekijä. Lisäksi muut tutkimuksessa saadut tulokset tukevat mahdollisuutta, että PI estää PVA:n P1-proteinaasin toimintaa. HR-linjoissa todettiin erilaisiin puolustusvasteisiin liittyvien PR-geenien aktivoitumista PVA-tartunnan seurauksena, mutta myös ilman sitä kasvien kasvettua mullassa noin neljä viikkoa. Sen sijaan solukkoviljelyssä tai vasta kaksi viikkoa mullassa kasvaneissa kasveissa vastaavaa ei vielä todettu. Tulos viittaa siihen, että HR-perunat reagoivat herkemmin ympäristöön ja/tai kasvin kehitysasteeseen laukaisten puolustusvasteita, jotka saattavat parantaa kestävyyttä taudinaiheuttajia vastaan. Kolmas tutkittu kestävyystyyppi havaittiin Pito-perunalajikkeessa. Se muistutti nnr-kestävyyttä siten, että myös siinä viruksen liikkuminen nilassa muihin kasvinosiin estyi. PVA:n todettiin pysähtyvän vasta lehtiruodin tyvelle muodostuvaan irtoamisvyöhykkeeseen, mitä havainnollistettiin käyttämällä muunnettua PVA-rotua, joka tuotti UV-valossa fluoresoivaa vihreää valoa. Tulos viittaa siihen, että virus ei pääse kulkemaan vyöhykkeeseen kuuluvan suojaavan kerroksen läpi, jollei sillä ole pääsyä nilaan. Tällainen kestävyys on tarpeen, jotta virus ei voi korvata nilakuljetusta solusta soluun leviämisellä. Tulokset tuovat uusia näkökulmia kasvien viruskestävyyteen ja auttavat selittämään viruksen nilakuljetuksen estymistä sekä solusta soluun leviämisen pysähtymistä kestävissä kasveissa.

Irradiation effects in graphene and related materials

Nanomaterials with a hexagonally ordered atomic structure, e.g., graphene, carbon and boron nitride nanotubes, and white graphene (a monolayer of hexagonal boron nitride) possess many impressive properties. For example, the mechanical stiffness and strength of these materials are unprecedented. Also, the extraordinary electronic properties of graphene and carbon nanotubes suggest that these materials may serve as building blocks of next generation electronics. However, the properties of pristine materials are not always what is needed in applications, but careful manipulation of their atomic structure, e.g., via particle irradiation can be used to tailor the properties. On the other hand, inadvertently introduced defects can deteriorate the useful properties of these materials in radiation hostile environments, such as outer space. In this thesis, defect production via energetic particle bombardment in the aforementioned materials is investigated. The effects of ion irradiation on multi-walled carbon and boron nitride nanotubes are studied experimentally by first conducting controlled irradiation treatments of the samples using an ion accelerator and subsequently characterizing the induced changes by transmission electron microscopy and Raman spectroscopy. The usefulness of the characterization methods is critically evaluated and a damage grading scale is proposed, based on transmission electron microscopy images. Theoretical predictions are made on defect production in graphene and white graphene under particle bombardment. A stochastic model based on first-principles molecular dynamics simulations is used together with electron irradiation experiments for understanding the formation of peculiar triangular defect structures in white graphene. An extensive set of classical molecular dynamics simulations is conducted, in order to study defect production under ion irradiation in graphene and white graphene. In the experimental studies the response of carbon and boron nitride multi-walled nanotubes to irradiation with a wide range of ion types, energies and fluences is explored. The stabilities of these structures under ion irradiation are investigated, as well as the issue of how the mechanism of energy transfer affects the irradiation-induced damage. An irradiation fluence of 5.5x10^15 ions/cm^2 with 40 keV Ar+ ions is established to be sufficient to amorphize a multi-walled nanotube. In the case of 350 keV He+ ion irradiation, where most of the energy transfer happens through inelastic collisions between the ion and the target electrons, an irradiation fluence of 1.4x10^17 ions/cm^2 heavily damages carbon nanotubes, whereas a larger irradiation fluence of 1.2x10^18 ions/cm^2 leaves a boron nitride nanotube in much better condition, indicating that carbon nanotubes might be more susceptible to damage via electronic excitations than their boron nitride counterparts. An elevated temperature was discovered to considerably reduce the accumulated damage created by energetic ions in both carbon and boron nitride nanotubes, attributed to enhanced defect mobility and efficient recombination at high temperatures. Additionally, cobalt nanorods encapsulated inside multi-walled carbon nanotubes were observed to transform into spherical nanoparticles after ion irradiation at an elevated temperature, which can be explained by the inverse Ostwald ripening effect. The simulation studies on ion irradiation of the hexagonal monolayers yielded quantitative estimates on types and abundances of defects produced within a large range of irradiation parameters. He, Ne, Ar, Kr, Xe, and Ga ions were considered in the simulations with kinetic energies ranging from 35 eV to 10 MeV, and the role of the angle of incidence of the ions was studied in detail. A stochastic model was developed for utilizing the large amount of data produced by the molecular dynamics simulations. It was discovered that a high degree of selectivity over the types and abundances of defects can be achieved by carefully selecting the irradiation parameters, which can be of great use when precise pattering of graphene or white graphene using focused ion beams is planned.

Numeroiden harhaa vai toteutuksen työkaluja? -indikaattorien käyttö maatalouden ympäristöpoliittisessa suunnittelussa

This research focused on indicators with the aim of recognizing the main characters of this particular tool. The planning and use of Finnish sustainability indicators for natural resource management was examined as well as the experiences about the international sets of agri-environmental indicators were described. In both cases, the actual utilization of information was found to be quite minimal. Indicators have succeeded in bringing more of environmental information into the processes of decision making, but information has not been directly shifted into the actions of natural resource management. The concept of technical use of indicators was presented and considered as a possible explanation for the failures of information transfer and communication. Traditionally indicators have been used in order to recognize and describe the performance of certain system; to provide clear operative message for the actors. In policy planning, the situation is essentially different. We may lack both the jointly shared and accepted objectives of development as well the reliable and representative methods for measuring the issue under attention. Therefore, the technical orientation of using indicators may cause several problems at the policy forum. The study identified the risks of 1) reduced informative basis of decision-making, 2) narrowed approach of interpreting the data, 3) the focus on the issues that already are best documented and provides the most representative data series, and 4) the risks of losing the systemic viewpoints while focusing on measurable details of the system. Technical use of indicators may also result the excessive focus on information while being detached from the actions. With sustainability indicators, the major emphasis was indeed paid with producing information while the reality of agricultural practices was left mostly unaffected. Therefore, the essential process of social learning, where actions and producing of relevant information are alternating was neither realized. This study underlines the complexity of information transfer, mutual communication and the learning of new practices. Besides the information and measurable number people also need personal experiences and interesting stories, which make them to understand the meaning of information in their own lives. Particularly important this is for thechildren, who are studying for to be the future decision-makers of food system; in production as well as the in consumption of food. Numbers will be useful tools of management as soon there exists the awareness of the direction, where to strive for.

Future consumers’ perceptions of sustainability, and their reflections on buying decisions

The purpose of this quantitative study is to study future consumers’ perception of sustainability in relation to business in general and specifically concerning the forest industry. The aim is to understand, what they feel is important for sustainable business and how the forest industry, in their opinion, is performing in this respect. Further, it aims to study how these perceptions reflect in their buying decisions. The research was conducted by a quantitative survey in two countries, Finland and Hong Kong, in the spring of 2015. All data used in the research is primary. The result indicate that consumers see sustainability issues important today and in the future. Sustainability is seen important both for business in general for the forest industry. The industry is considered sustainable now, but room for improvements exists. The appreciation of sustainability does not reflect to buying decisions, however. The buying of ecological products seems to be more up to chance than to intention. Consumers are not proactive in searching for more ecological or responsible options. Information needs to be taken to them. Ecologicalness as such is still not a strong selling point.

Pk-yritysten ympäristöllisen kestävyyden kehittäminen palvelumuotoilua hyödyntäen

Ympäristöllinen kestävyys on ajankohtaisempi asia kuin koskaan ja sen merkitys yritysten yhtenä kestävyyden osa-alueena kasvaa jatkuvasti. Erityisesti suuret yritykset pyrkivät erottumaan kilpailijoistaan ympäristöllisen kestävyyden avulla, mutta myös pk-yritykset olisi tärkeää saada mukaan toiminnan kehittämiseen. Aikaisemmat tutkimukset yritysten ympäristöllisestä kestävyydestä ovat keskittyneet pääosin käytössä oleviin menetelmiin ja kestävyyden kehittämisen suurimpiin haasteisiin. Tärkeää olisi tutkia myös sitä, miten pk-yritykset saataisiin mukaan kehittämään toimintaansa ympäristöllisesti kestävämmäksi. Tähän pyritään löytämään vastauksia tässä diplomityössä. Diplomityön tarkoituksena on tutkia sitä, millä tavoin pk-yritykset haluavat kehittää toimintaansa ympäristöllisesti kestävämmäksi. Työn tavoitteena on suunnitella pk-yritysten tarpeita vastaava palvelukonsepti niiden ympäristöllisen kestävyyden kehittämiseksi. Tutkimuksessa hyödynnetään palvelumuotoilua ja sen prosessin kolmea ensimmäistä vaihet-ta: asiakasymmärryksen hankintaa, luovaa ideointia sekä palvelukonseptin kehittämistä. Tutkimus on laadullinen tutkimus, jonka tutkimusmetodina toimii palvelumuotoilun tärkein osa-alue eli yhteissuunnittelu. Yhteissuunnittelu toteutettiin visuaalisten työpajojen avulla suunnitteluun osallistuvien pk-yritysten kanssa. Tutkimuksen tuloksena saatiin suunniteltua pk-yritysten tarpeisiin räätälöity palvelukonsepti niiden ympäristöllisen kestävyyden kehittämiseksi. Palvelun tärkeimpiä ominaisuuksia ovat jatkuva tiedon lisääminen, kokonaisuuden hahmottamista helpottava visuaalisuus sekä palvelun virallisiin standardeihin pohjautuva kokonaisuus. Lisäksi palvelu mahdollistaa toiminnan kehittämisen pienin askelin sen porrastetun menetelmän ansiosta. Yksi tärkeä ominaisuus on myös palvelun tarjoama mahdollisuus tietojen helppoon ja nopeaan doku-mentointiin sekä jalostamiseen.