CSR in Private Enterprises in Developing Countries : Evidences from the Ready-Made Garments Industry in Bangladesh

"This book examines the growing trend of recognition and practices of CSR in private enterprises in developing countries. It identifies the challenges and deficiencies in these practices and proposes means for improvement. Based on a sound theoretical foundation, this book focusses on the case of Bangladesh and the ready-made garment industry to exemplify the described developments. After a brief introduction the book outlines the standards of Corporate Social Responsibility. It compares the trends in CSR practices both in developed and developing countries and then embarks on CSR practices in the private sector in Bangladesh to finally present a detailed analysis of CSR and its practices in the ready-made garment industry. The book not only compares developing countries with developed, but as well provides an assessment and analysis of different stages of CSR within the South Asian area."--published website

The ones that come ready made:The identification and use of Sus tusks as tools at prehistoric cave sites in Malaysia

Evidence for osseous technologies has featured in excavation reports from Southeast Asia for almost a century and from archaeological deposits as old as 43,000 years BP. However, in contrast to the significance that is placed on this technology in other parts of the world, until recently, Southeast Asian assemblages have drawn only very limited attention. Concentrating on evidence from Malaysia, the current paper examines one element of this inventory of tools: the deliberate modification of pig canines and the means by which such alteration can be distinguished from patterns of natural tooth wear. Particular attention is paid to the bearded pig (Sus barbatus), as it is one of the two species of wild boar in Malaysia whose tusks are most likely to have been used by prehistoric toolmakers. Reference is also made to wider, regional ethnographic examples of known tusk implements and their accredited uses to further assist in the identification process. Distinguishing criteria for worked tusk are formulated according to the type and extent of modification. These criteria are then applied to archaeological specimens recovered from two prehistoric cave sites in Malaysia, Gua Bintong and Niah Cave.

La città ready-made. Partecipazione, relazione e azione nel ‘900

La città ready-made. Partecipazione, relazione e azione nel ‘900 è un percorso storico-critico che si snoda lungo tutto il ‘900 alla ricerca degli episodi in cui è possibile riscontrare la partecipazione nelle pratiche estetiche di diverse generazioni di artisti; per imbastire un racconto puntuale e sistematico, inoltre, si è ricorsi ad una metafora genetica che ha riscontrato una fase — corrispondente alla prima metà del secolo — in cui il cromosoma responsabile di tale afflato partecipativo è risultato recessivo e un’altra — corrispondente stavolta alla seconda metà, più o meno dagli anni ’60 ai ’90 — in cui si è potuto registrare, altresì, una dominanza. Ad influire su questi fenomeni e sul loro svolgimento nei decenni, i protagonisti assoluti di questa trattazione: la Città e il Pubblico che, di volta in volta, facendo sentire la loro presenza o facendola venir meno, hanno dettato l’agenda della socio-relazionalità nel ‘900. Si è, inoltre, provveduto a rileggere alcuni episodi estetici al fine di evidenziarne un andamento ciclico e di ripetizione: mentre nella prima metà della ricerca si è scovato il seme della socio-relazionalità nelle visite e nelle derive di dadaisti e situazionisti, nella seconda ci si è concentrati sull’ampia produzione dei collettivi artistici di New York negli anni ’70. A dimostrazione di come la relazionalità non sia un fenomeno esclusivamente legato alla pratica dell’arte degli anni ’90, ma che, con le opportune distinzioni generazionali, è possibile riscontrarne le tracce in tutta la contemporaneità.

Self-refraction, ready-made glasses and quality of life among rural myopic Chinese children: a non-inferiority randomized trial.

PURPOSE: To study, for the first time, the effect of wearing ready-made glasses and glasses with power determined by self-refraction on children's quality of life. METHODS: This is a randomized, double-masked non-inferiority trial. Children in grades 7 and 8 (age 12-15 years) in nine Chinese secondary schools, with presenting visual acuity (VA) ≤6/12 improved with refraction to ≥6/7.5 bilaterally, refractive error ≤-1.0 D and <2.0 D of anisometropia and astigmatism bilaterally, were randomized to receive ready-made spectacles (RM) or identical-appearing spectacles with power determined by: subjective cycloplegic retinoscopy by a university optometrist (U), a rural refractionist (R) or non-cycloplegic self-refraction (SR). Main study outcome was global score on the National Eye Institute Refractive Error Quality of Life-42 (NEI-RQL-42) after 2 months of wearing study glasses, comparing other groups with the U group, adjusting for baseline score. RESULTS: Only one child (0.18%) was excluded for anisometropia or astigmatism. A total of 426 eligible subjects (mean age 14.2 years, 84.5% without glasses at baseline) were allocated to U [103 (24.2%)], RM [113 (26.5%)], R [108 (25.4%)] and SR [102 (23.9%)] groups, respectively. Baseline and endline score data were available for 398 (93.4%) of subjects. In multiple regression models adjusting for baseline score, older age (p = 0.003) and baseline spectacle wear (p = 0.016), but not study group assignment, were significantly associated with lower final score. CONCLUSION: Quality of life wearing ready-mades or glasses based on self-refraction did not differ from that with cycloplegic refraction by an experienced optometrist in this non-inferiority trial.

Metaheuristic approaches to the hybrid flow shop scheduling problem with a cost-related criterion

In the paper, the flow-shop scheduling problem with parallel machines at each stage (machine center) is studied. For each job its release and due date as well as a processing time for its each operation are given. The scheduling criterion consists of three parts: the total weighted earliness, the total weighted tardiness and the total weighted waiting time. The criterion takes into account the costs of storing semi-manufactured products in the course of production and ready-made products as well as penalties for not meeting the deadlines stated in the conditions of the contract with customer. To solve the problem, three constructive algorithms and three metaheuristics (based one Tabu Search and Simulated Annealing techniques) are developed and experimentally analyzed. All the proposed algorithms operate on the notion of so-called operation processing order, i.e. the order of operations on each machine. We show that the problem of schedule construction on the base of a given operation processing order can be reduced to the linear programming task. We also propose some approximation algorithm for schedule construction and show the conditions of its optimality.

Sustainability factors in Industrialised Building System

In Malaysia, Industrialised Building Systems (IBS) are being promoted as a potential to enhance sustainability by the building industry and government. Known elsewhere as prefabricated construction, IBS employs a combination of ready-made components in the construction of buildings that promote quality of production, enhance simplification of construction processes and minimise on-site work. The components are manufactured in a factory either on or off site. They are then positioned and assembled into building structures. The unique characteristic of IBS has the potential to respond well to the sustainability challenge facing the construction industry. Despite the promises however, IBS has yet to be effectively implemented in Malaysia. There are often misconceptions among key stakeholders about IBS applications and some of the rating schemes fail to assess IBS towards sustainability deliverables. A holistic approach to improving IBS implementation is necessary to consider sustainability perceptions on IBS among key stakeholders. As IBS design is one of the most important development phases to incorporate sustainability requirements and expectations, a framework of embedding sustainability factors into IBS design is being developed through research. This paper presents an improved IBS design process focused on sustainability, showing where and how sustainability should be assessed to improve IBS construction. The framework being developed can provide guidance and decision making assistance to not only design consultants but all relevant stakeholders by integrating sustainability concepts into IBS applications. Outcome of the research will also provide a benchmark for developing countries in adopting prefabricated construction systems.

Legal regulation of 'decent work' : evidence from two big industries in Bangladesh

In most developing countries, the overall quality of the livelihood of labourers, work place environment and implementation of labour rights do not progress at the same rate as their industrial development. To address this situation, the ILO has initiated the concept of 'decent work' to assist regulators articulate labour-related social policy goals. Against this backdrop, this article assesses the Bangladesh Labour Law 2006 by reference to the four social principles developed by the ILO for ensuring 'decent work'. It explains the impact of the absence of these principles in this Law on the labour administration in the ready-made garment and ship-breaking industries. It finds that an appropriate legislative framework needs to be based on the principles of 'decent work' to establish a solid platform for a sound labour regulation in Bangladesh.

Decision making guidelines for sustainable construction of industrialised building systems

The construction industry has an obligation to respond to sustainability expectations of our society. Solutions that integrate innovative, intelligent and sustainability deliverables are vital for us to meet new and emerging challenges. Industrialised Building Systems (IBS), or known otherwise as prefabrication, employs a combination of ready-made components in the construction of buildings. They promote quality of production, enhance simplification of construction processes and minimise waste. The unique characteristics of this construction method respond well to sustainability. Despite the promises however, IBS has yet to be effectively implemented in Malaysia. There are often misconceptions among key stakeholders about IBS applications. The existing rating schemes fail to assess IBS against sustainability measures. To ensure the capture of full sustainability potential in buildings developed, the critical factors and action plans agreeable to all participants in the development processes need to be identified. Through questionnaire survey, eighteen critical factors relevant to IBS sustainability were identified and encapsulated into a conceptual framework to coordinate a systematic IBS decision making approach. Five categories were used to separate the critical factors into: ecological performance; economic value; social equity and culture; technical quality; and implementation and enforcement. This categorisation extends the "Triple Bottom Lines" to include social, economic, environmental and institutional dimensions. Semi-structured interviews help identify strategies of actions and solutions of potential problems through a SWOT analysis framework. These tools help the decision-makers maximise the opportunities by using available strengths, avoid weaknesses, and diagnose possible threats in the examined issues. The recommendations formed an integrated action plan to present information on what and how to improve sustainability through tackling each critical factor during IBS development. It can be used as part of the project briefing documents for IBS designers. For validation and finalisation the research deliverables, three case studies were conducted. The research fills a current gap by responding to IBS project scenarios in developing countries. It also provides a balanced view for designers to better understand sustainability potential and prioritize attentions to manage sustainability issues in IBS applications.

Meta-regulation approach to raise social accountability In global supply firms

This Article proposes a meta-regulation approach to address the gap between the objectives, commitment, practice and outcome in the accountability practice of the global supply chain in the developing countries. The literatures on the accountability practice in the global supply chains typically focuses on the strategies for raising corporate social accountability standards in multinational buying firms and seldom focuses on this strategies in the outsourced firms in the developing countries. This article tries to fill this void by examining the situation in Bangladesh, the third largest RMG supply country in the world. It conceptualizes a meta-regulation approach with the aim of raising social accountability practice in this industry. It shows that this regulation approach is suitable to effectively raise this practice standard in a perspective where the non-legal drivers are meagrely low, global buying firms are highly profit driven and the governmental agencies are either inadequate or highly corrupt.

The nutritional profile of baby and toddler food products sold in Australian supermarkets

Background/Aims To examine the nutritional profile of baby and toddler foods sold in Australia. Methods Nutrient information for baby and toddler foods available at Australian supermarkets was collected between August and December 2013. Levels of declared energy, total fat, saturated fat, total sugar, sodium and estimated added sugar were examined, as well as the presence of additional micronutrients on the label. The Health Star Rating (HSR) system was used to determine nutritional quality. The range of products on offer was also examined by product type and by the age category for which the product was marketed. Results Of the 309 products included, 29 % were fortified. On a per 100 g basis, these 309 products provided a mean (±SD) of 476 ± 486 kJ, 1.6 ± 2.4 g total fat, 10.7 ± 12.2 g total sugar, 2.7 ± 7.4 g added sugar, and 33.5 ± 66.5 mg sodium. Fruit-based products or products with fruit listed as an ingredient (58 %) were the predominant product type. On the nutrition label, 42 % displayed at least one additional micronutrient while 37 % did not display saturated fat. The most common HSR was four stars (45 %) and 6? months was the most commonly identified targeted age group (36 %). Conclusions The majority of baby and toddler foods sold in Australian supermarkets are ready-made fruit-based products aimed at children under 12 months of age. Baby and toddler foods are overlooked in public policy discussions pertaining to population nutrient intake but their relatively high sugar content deriving from fruits requires close attention to ensure these foods do not replace other more nutrient dense foods, given children have an innate preference for sweet tastes.

Learning challenges of NGOs in development : Co-operation of Finnish NGOs in Morogoro, Tanzania

Non-governmental organisations (NGOs) have gained an important role in development co-operation during the last two decades. The development funding channelled through NGOs has increased and the number of NGOs engaged in development activities, both North and South, has been growing. Supporting NGOs has been seen as one way to strengthen civil society in the South and to provide potential for enhancing more effective development than the state, and to exercise participatory development and partnership in their North-South relationships. This study focuses on learning in the co-operation practices of small Finnish NGOs in Morogoro, Tanzania. Drawing on the cultural-historical activity theory and the theory of expansive learning, in this study I understand learning as a qualitative change in the actual co-operation practices. The qualitative change, for its part, emerges out of attempts to deal with the contradictions in the present activity. I use the concept of developmental contradiction in exploring the co-operation of the small Finnish NGOs with their Tanzanian counterparts. Developmental contradiction connects learning to actual practice and its historical development. By history, in this study I refer to multiple developmental trajectories, such as trajectories of individual participants, organisations, co-operation practices and the institutional system in which the NGO-development co-operation is embedded. In the empirical chapters I explore the co-operation both in the development co-operation projects and in micro-level interaction between partners taking place within the projects. I analyse the perceptions of the Finnish participants about the different developmental trajectories, the tensions, inclusions and exclusions in the evolving object of co-operation in one project, the construction of power relations in project meetings in three projects, and the collision of explicated partnership with the emerging practice of trusteeship in one project. On the basis of the empirical analyses I elaborate four developmental contradictions and learning challenges for the co-operation. The developmental contradictions include: 1) implementing a ready-made Finnish project idea vs. taking the current activities of Tanzanian NGO as a starting point; 2) gaining experiences and cultural interaction vs. access to outside funding; 3) promoting the official tools of development co-operation in training vs. use of tools and procedures taken from the prior activities of both partners in actual practice; and 4) asymmetric relations between the partners vs. rhetoric of equal partnership. Consequently, on the basis of developmental contradictions four learning challenges are suggested: a shift from legitimation of Finnish ideas to negotiation, transcending the separate objects and finding a partly joint object, developing locally shared tools for the co-operation, and identification and reflection of the power relations in the practice of co-operation. Keywords: activity theory; expansive learning; NGO development co-operation; partnership; power

Semanttisen webin ontologisen tekstiilikäsitteistön kehittäminen ja liittäminen museoiden luettelointitietoihin

DEVELOPING A TEXTILE ONTOLOGY FOR THE SEMANTIC WEB AND CONNECTING IT TO MUSEUM CATALOGING DATA The goal of the Semantic Web is to share concept-based information in a versatile way on the Internet. This is achievable using formal data structures called ontologies. The goal of this re-search is to increase the usability of museum cataloging data in information retrieval. The work is interdisciplinary, involving craft science, terminology science, computer science, and museology. In the first part of the dissertation an ontology of concepts of textiles, garments, and accessories is developed for museum cataloging work. The ontology work was done with the help of thesauri, vocabularies, research reports, and standards. The basis of the ontology development was the Museoalan asiasanasto MASA, a thesaurus for museum cataloging work which has been enriched by other vocabularies. Concepts and terms concerning the research object, as well as the material names of textiles, costumes, and accessories, were focused on. The research method was terminological concept analysis complemented by an ontological view of the Semantic Web. The concept structure was based on the hierarchical generic relation. Attention was also paid to other relations between terms and concepts, and between concepts themselves. Altogether 977 concept classes were created. Issues including how to choose and name concepts for the ontology hierarchy and how deep and broad the hierarchy could be are discussed from the viewpoint of the ontology developer and museum cataloger. The second part of the dissertation analyzes why some of the cataloged terms did not match with the developed textile ontology. This problem is significant because it prevents automatic ontological content integration of the cataloged data on the Semantic Web. The research datasets, i.e. the cataloged museum data on textile collections, came from three museums: Espoo City Museum, Lahti City Museum and The National Museum of Finland. The data included 1803 textile, costume, and accessory objects. Unmatched object and textile material names were analyzed. In the case of the object names six categories (475 cases), and of the material names eight categories (423 cases), were found where automatic annotation was not possible. The most common explanation was that the cataloged field was filled with a long sentence comprised of many terms. Sometimes in the compound term, the object name and material, or the name and the way of usage, were combined. As well, numeric values in the material name cataloging field prevented annotation and so did the absence of a corresponding concept in the ontology. Ready-made drop-down lists of materials used in one cataloging system facilitated the annotation. In the case of naming objects and materials, one should use terms in basic form without attributes. The developed textile ontology has been applied in two cultural portals, MuseumFinland and Culturesampo, where one can search for and browse information based on cataloged data using integrated ontologies in an interoperable way. The textile ontology is also part of the national FinnONTO ontology infrastructure. Keywords: annotation, concept, concept analysis, cataloging, museum collection, ontology, Semantic Web, textile collection, textile material

Do laptop ao jogo interacional: sentidos circulantes no Fórum de discussão do Programa Conexão Professor (2008-2010)

Esta pesquisa analisa os sentidos circulantes nos textos publicados (postagens) por professores e Moderadora no Fórum de discussão online do Programa Conexão Professor, desenvolvido pela Secretaria de Estado de Educação do Rio de Janeiro (SEEDUC). Parte de dois modos de objetivação das tecnologias da informação e da comunicação (TIC): uma, em que as TIC são apontadas como revolução tecnológica no contexto da sociedade da informação; e outra centrada na recontextualização educacional das TIC. Situa a distribuição de laptops para os professores da rede estadual de ensino no contexto do Programa citado, buscando apreender ambos nos termos do ciclo contínuo de políticas, de Richard Bowe e Stephen Ball. Trata o Fórum de discussão online como locus privilegiado e os textos nele produzidos, entre dezembro de 2008 e julho de 2010, como corpus. Assume como alternativa teórico-metodológica a Análise Crítica do Discurso (ACD), formulada por Norman Fairclough, elegendo como pontos de entrada: o controle interacional, as escolhas lexicais e a modalidade. Investiga, a partir das pistas discursivas detectadas nas postagens, as relações estabelecidas entre a proposta de incorporação das TIC e a totalidade do trabalho docente. Conclui que os sentidos postos em circulação contestam a centralidade atribuída às TIC, apontando a substituição tecnológica como tendência política atual, expressa pelo deslocamento da ênfase na discussão para o fornecimento de materiais prontos, denominados objetos de aprendizagem

Presentation Based User Interface

A prototype presentation system base is described. It offers mechanisms, tools, and ready-made parts for building user interfaces. A general user interface model underlies the base, organized around the concept of a presentation: a visible text or graphic for conveying information. Te base and model emphasize domain independence and style independence, to apply to the widest possible range of interfaces. The primitive presentation system model treats the interface as a system of processes maintaining a semantic relation between an application data base and a presentation data base, the symbolic screen description containing presentations. A presenter continually updates the presentation data base from the application data base. The user manipulates presentations with a presentation editor. A recognizer translates the user's presentation manipulation into application data base commands. The primitive presentation system can be extended to model more complex systems by attaching additional presentation systems. In order to illustrate the model's generality and descriptive capabilities, extended model structures for several existing user interfaces are discussed. The base provides support for building the application and presentation data bases, linked together into a single, uniform network, including descriptions of classes of objects as we as the objects themselves. The base provides an initial presentation data base network graphics to continually display it, and editing functions. A variety of tools and mechanisms help create and control presenters and recognizers. To demonstrate the base's utility, three interfaces to an operating system were constructed, embodying different styles: icons, menu, and graphical annotation.

Una breve sintesi sulla presenza degli anglicismi nel settore delle lingue speciali riguardo all 'italiano contemporaneo

This article presents the classification and description of borrowings from the English language in the sector of special languages with reference to contemporary Italian. The present times are characterized by multiplicity of linguistic variants. Different, ready-made solutions to are observed this complex situation.