Petrologic and geochemical characterization of São Jorge island volcanism, Azores

The island of São Jorge (38º 45’ 24’’ N - 28º 20’ 44’’W and 38º 33’ 00’’ N - 27º 44’ 32’’ W) is one of the nine islands of the Azores Archipelago that is rooted in the Azores Plateau, a wide and complex region which encompasses the triple junction between the American, Eurasia and Nubia plates. São Jorge Island has grown by fissural volcanic activity along fractures with the regional WNW-ESE trend, unveiling the importance of the regional tectonics during volcanic activity. The combination of the volcanostratigraphy (Forjaz & Fernandes, 1975; and Madeira, 1998) with geochronological data evidences that the island developed during two main volcanic phases. The first subaerial phase that occurred between 1.32 and 1.21 Ma ago (Hildenbrand et al. 2008) is recorded on the lava sequence forming the cliff at Fajã de São João, while the second phase started at 757 ka ago, is still active, and edified the rest of the island. This second phase edified the east side of the island that corresponds to Topo Volcanic Complex, in the period between 757 and 543 ka ago, while the west side named Rosais Volcanic Complex, started at 368 ka ago (Hildenbrand et al. 2008) and was still active at 117 ka ago. After the onset of Rosais, volcanic activity migrates to the center of São Jorge edifying Manadas Volcanic Complex. The volcanism on São Jorge is dominantly alkaline, with a narrow lithological composition ranging between the basanites/tefrites through the basaltic trachyandesites, in spite of this the two volcanic phases show distinct mineralogical, petrographic and geochemical characteristics that should be related with different petrogenetic conditions and growth rates of the island. Abstract viii During the first volcanic phase, growth rates are faster (≈3.4 m/ka), the lavas are slightly less alkaline and plagioclase-richer, pointing to the existence of a relative shallow and dynamic magma chamber where fractional crystallization associated with gravitational segregation and accumulation processes, produced the lavas of Fajã de São João sequence. The average growth rates during the second volcanic phase are lower (≈1.9 m/ka) and the lavas are mainly alkaline sodic, with a mineralogy composed by olivine, pyroxene, plagioclase and oxide phenocrysts, in a crystalline groundmass. The lavas are characterized by enrichment in incompatible trace element and light REE, but show differences for close-spaced lavas that unveil, in some cases, slight different degrees of fertilization of the mantle source along the island. These differences might also result from higher degrees of partial melting, as observed in the early stages of Topo and Rosais volcanic complexes, of a mantle source with residual garnet and amphibole, and/or from changing melting conditions of the mantle source as pressure. The subtle geochemical differences of the lavas contrast with the isotopic signatures, obtained from Sr-Nd-Pb-Hf isotopes, that São Jorge Island volcanism exhibit along its volcanic complexes. The lavas from Topo Volcanic Complex and from the submarine flank, i.e. the lavas located east of Ribeira Seca Fault, sample a mantle source with similar isotopic signature that, in terms of lead, overlaps Terceira Island. The lavas from Rosais and Manadas volcanic complexes, the western lavas, sample a mantle source that becomes progressively more distinct towards the west end of the island and that, in terms of lead isotopes, trends towards the isotopic composition of Faial Island. The two isotopic signatures of São Jorge, observed from the combination of lead isotopes with the other three systems, seem to result from the mixing of three distinct end-members. These end-members are (1) the common component related with the Azores Plateau and the MAR, (2) the eastern component with a FOZO signature and possibly related with the Azores plume located beneath Terceira, and (3) the western component, similar to Faial, where the lithosphere could have been entrained by an ancient magmatic liquid, isolated for a period longer than 2Ga. The two trends observed in the island reinforce the idea of small-scale mantle heterogeneities beneath the Azores region, as it has been proposed to explain the isotopic diversity observed in the Archipelago.

Efeito da presença de outros metais na remoção de mercúrio com cortiça

O Homem sempre utilizou processos produtivos com o intuito de satisfazer as suas necessidades básicas. Com o aumento da população mundial, atualmente superior a sete mil milhões de indivíduos, a quantidade de resíduos produzidos pela atividade humana, através da atividade industrial e descarga de resíduos domésticos e agrícolas, tomou dimensões desmesuradas, que são responsáveis por gerar um elevado volume de resíduos contendo diversos elementos e compostos prejudiciais ao ambiente, e, consequentemente, para a saúde humana, entre os quais se incluem alguns metais. O presente trabalho tem como principais objetivos estudar a remoção de mercúrio pela cortiça em águas sintéticas (agua MilliQ) e naturais (água de abastecimento público), na presença de outros metais (Cd, Pb e Cu) e avaliar a influência destes metais no processo de remoção. Os resultados permitiram verificar que 2,5mg/L de cortiça é uma quantidade adequada para remover mercúrio de uma solução com concentração inicial de 50μg/L de metal (percentagem de remoção de 70%), na ausência de outros contaminantes (cádmio, chumbo e cobre). Nestas condições, a quantidade máxima de mercúrio removido pela cortiça após 96 horas de contacto foi de 11,6mg de mercúrio por grama de cortiça. A presença de chumbo e cobre ou uma mistura deles reduziu a taxa de remoção de mercúrio pela cortiça e a velocidade inicial de remoção; a presença de cádmio afetou a velocidade inicial de remoção. Mesmo com a adição de outros contaminantes, como cádmio, chumbo e cobre e na presença de água de abastecimento público, observou-se que a cortiça apresenta capacidade de remoção de mercúrio. O modelo de pseudo segunda ordem foi o que apresentou um melhor ajuste aos resultados obtidos e o processo de remoção de mercúrio pela cortiça aparenta ser controlado quer pela difusão no filme quer pela difusão no poro.

Síntese de ésteres catalisada por fosfatos e fosfonatos metálicos(IV)

No âmbito do Mestrado em Química, com especialização em Química Orgânica e Produtos Naturais, será apresentado nesta dissertação o trabalho desenvolvido sobre a síntese e caracterização de fosfatos e fosfonatos metálicos tetravalentes, assim como a avaliação da sua capacidade catalítica em reações de esterificação. Iniciou-se este trabalho pela síntese de vários fosfatos e fosfonatos metálicos tetravalentes, que apresentam a fórmula geral MIV(HXO4)2.nH2O e MIV(RXO3)2.nH2O, respetivamente, onde MIV = Zr, X = P, W, Mo e R = grupo orgânico. Os compostos sintetizados foram caracterizados por espetroscopia de infravermelho, difração de raios-X de pós e por análise elementar e termogravimétrica. Os fosfatos e fosfonatos metálicos tetravalentes foram avaliados como catalisadores em reações de esterificação de Fischer entre os ácidos acético, ou benzóico, e diferentes álcoois. Após esta avaliação foram efetuados estudos de otimização das condições reacionais para a síntese de cada éster. Em cada um dos casos foi utilizado o catalisador com o qual se obtiveram os melhores rendimentos nos estudos iniciais, ou seja com o molibdato-fenilfosfonato de zircónio(IV), ZrMoPhP. Todas as reações foram monitorizadas por cromatografia gasosa ou por cromatografia líquida de alta pressão. Todos os ésteres foram identificados por comparação com os padrões correspondentes.

Aplicação de cortiça em dois tipos de reatores para tratamento de água

A qualidade da água degradou-se de forma relevante nas últimas décadas e os processos de sorção têm vindo a ser investigados como métodos promissores para o tratamento de águas contaminadas. Neste trabalho avaliou-se a capacidade de dois tipos de cortiça para a remoção de diversos contaminantes, em reatores de vaso fechado e de leito fixo. Os ensaios realizados em reatores de vaso fechado permitiram (i) avaliar o efeito do pH e da granulometria na eficiência dos sorventes na remoção de mercúrio e (ii) avaliar a afinidade dos sorventes para outros contaminantes, nomeadamente arsénio, cádmio, níquel e chumbo. Estruturalmente as duas cortiças estudadas aparentam ser semelhantes, com uma pequena diferença de comportamento ácido-base e não apresentam diferenças estatisticamente significativas na remoção de mercúrio. Os resultados obtidos permitiram constatar que o processo de remoção é independente do pH, tendo-se obtido percentagens de remoção da ordem dos 80% e de concentrações de mercúrio na cortiça na ordem dos 117 μg/g. As cortiças estudadas revelaram-se menos eficazes no tratamento de água com os restantes contaminantes, atingindo percentagens de remoção máximas de 0% para As, 11% para Cd, 35% para Ni e 69% para Pb. Os ensaios em leito fixo, mesmo sem terem sido otimizados, revelam que é possível obter uma eficácia de remoção de mercúrio superior a 90% nas primeiras 40 horas de trabalho, sendo a concentração de mercúrio no leito de 680 μg/g. Relativamente aos mecanismos de sorção, os resultados experimentais indicam que estes são possivelmente de natureza química e que as interações eletrostáticas têm pouca importância.

Metais em águas e sedimentos da plataforma dos Açores

A presente tese tem por objetivo principal contribuir para o conhecimento da geoquímica sedimentar da zona oceânica da crista da Terceira e montanhas submarinas a sul (região entre 29-39ºN e 27-32ºW), integrando também a caraterização dos metais e nutrientes na coluna de água e propondo concentrações para servirem de referência nesta região do Atlântico Central. Para o efeito foram realizadas amostragens na coluna de água em sete locais e de sedimento em cinco locais, durante a campanha oceanográfica designada por EMEPC/AÇORES/G3/2007 a bordo do navio SV Kommandor Jack, no âmbito do projeto da Estrutura de Missão para a Extensão da Plataforma Continental (EMEPC). Os perfis de CTD da coluna de água na região estudada revelam a presença de massas de água distintas: a Western North Atlantic Central Water (WNACW), a Eastern North Atlantic Central Water tropical (ENACWt), a Eastern North Atlantic Central Water polar (ENACWp), a Mediterranean Overflow Water (MOW), a Deep Mediterranean Water (DMW) e a North Eastern Atlantic Deep Water (NEADW). Observou-se nos perfis de temperatura e salinidade, referentes aos primeiros 200 m da coluna de água, um gradiente meridional negativo entre as estações localizadas na crista da Terceira e as estações localizadas mais a sul. Observou-se nas águas superficiais valores de oxigénio dissolvido de 93% e de pH de 8,1, assim como que as concentrações dos nutrientes NOx, PO4 e SiO2 variam de acordo com a atividade biológica, tendo-se registado concentrações medianas mais baixas, respetivamente de 6,5, 0,23 e 1,3 mol L-1, que aumentam com a profundidade devido à ausência de produção primária (respetivamente 31, 1,4 e 22 mol L-1). As concentrações de NH4 e de SO4 não variam significativamente nas massas de água, sendo os valores medianos mínimos e máximos de 0,69 a 0,79 mol L-1 para o NH4 e de 30 a 32 mol L-1 para o SO4. São propostas concentrações de referência para as massas de água, para os elementos cobre, cádmio, chumbo e arsénio. Os perfis de sedimento analisados permitem distinguir os sedimentos na crista da Terceira (core A) dos restantes (cores B a E). A grande variabilidade textural encontrada no core A, que contrasta com os outros cores analisados, deve-se a importantes contribuições terrígenas, originadas pela erosão sub-aérea e pela atividade vulcânica das ilhas próximas. iv resumo (continuação) A análise mineralógica, efetuada à fração areia e à fração fina (< 63 μm), confirma que os sedimentos do core A derivam de rochas vulcânicas formadas maioritariamente por piroxenas, olivinas, anfíbolas, biotite, alterites e ainda calcite, plagióclase e magnetite, tendo-se identificado ao microscópio a glauconite e o vidro vulcânico. De acordo com a composição química destes minerais o core A apresenta valores mais elevados de Al, Fe, K, P, Mg, Si, Na, Zn, V, Cr e Mn relativamente aos cores B a E. Os cores B a E apresentam grandes quantidades de calcite (>80%) formada maioritariamente por foraminíferos e nanoplâncton calcário (cocolitóforos). A fração areia confirma a composição maioritariamente carbonatada com grande abundância de material biogénico formado por oozes de foraminíferos (planctónicos e bentónicos) com raras espículas de espongiários e restos de conchas. Os cores B a E apresentam valores muito mais elevados que o core A para os elementos Ca e Sr. Os resultados para o Al, Fe, K, P, Si, Na, As, Cu, Ni, Zn, V, Cr, Li, Pb, Cd e Co presentes nos locais B, C, D e E sugerem que estes cores são comparáveis aos sedimentos de fundo carbonatados. Propõe-se concentrações de referência para a região do Atlântico compreendida entre 29-39ºN e 27-32ºW considerando a primeira camada colhida em cada core. Para o core A as concentrações são normalizadas a 5% de Al e CaCO3, enquanto que para os cores B a E são normalizadas a 2% de Al e CaCO3. Assim as concentrações de referência para o core A são: As – 18 mg kg-1, Cr – 91 mg kg-1, Cu – 127 mg kg-1, Ni – 84 mg kg-1, Pb – 41 mg kg-1, Hg – 41 ng g-1 e Zn – 482 mg kg-1. Para os cores B a E as concentrações de referência são: As – 3 mg kg-1, Cr – 10 mg kg-1, Cu – 36 mg kg-1 Ni – 12 mg kg -1, Hg – 3 ng g-1 e Zn – 20 mg kg-1. Para os restantes metais as concentrações de referência para o core A são: Al – 9%, Si – 25%, Fe – 6%, Ca – 13%, K – 2%, Mg – 2%, Na – 3%, P – 0,4%, Sr – 900 mg kg-1, Li – 10 mg kg-1, Mn – 1200 mg kg-1, Ba – 700 mg kg-1 e V – 140 mg kg-1. Para os cores B a E as concentrações de referência são: Al – 0,9%, Si – 2%, Fe – 0,2%, Ca – 95%, K – 0,3%, Mg – 0,4%, Na – 0,3%, P – 0,04%, Sr – 2600 mg kg-1, Li – 5 mg kg-1, Mn – 240 mg kg-1, Ba – 345 mg kg-1, Co – 2 mg kg-1 e V – 6 mg kg-1. Os resultados da presente tese constituem um contributo para a caraterização geoquímica da região e podem servir de referência à monitorização futura do mar dos Açores e montes submarinos a sul.

Metais em plantas e algas : acumulação e potencial aplicação em processos de remediação

The present work reports the study of the bioaccumulation of potentially toxic elements (cadmium, lead and mercury) by marine macroalgae (Ulva lactuca, Fucus vesiculosus and Gracilaria gracilis), abundant in the coast and estuarine systems worldwide. These organisms proved to be capable of withstanding moderate multi-metallic contamination (environmentally relevant concentrations), incorporating high amounts of metal in their tissues. The high removal percentages achieved, in particular for mercury (99%), demonstrate the potential of these algae as a basis for a new biotechnological treatment of saline waters contaminated with metals (more efficient, cost-effective and environmentally friendly than conventional methods). U. lactuca was considered the most promising due to the better performance presented. The comparison between the bioaccumulation and biosorption processes suggested that in some cases the use of the living organism will have advantages over the application of biomass, due to the simplicity of the overall process, and the lower residual concentration of metal achieved in the solution (especially for Cd). The transfer and accumulation of Hg by terrestrial plants (Brassica juncea and Lolium perenne) in agricultural fields near a contaminated industrial area was also studied. Despite the low bioaccumulation factors found (<1), there were high Hg content in plants (up to 84 mg kg-1 in roots and up 6.9 mg kg-1 in shoots, dry weight). Daily intake estimates for grazing animals (cows and sheep) pointed to the potential risk to human health derived from consumption of their meat. The results highlighted the important role that plants and algae may have in protection, risk assessment and remediation of environmental systems contaminated with metals.

Ferroelectric : CNTs structures fabrication for advanced functional nano devices

This work is about the combination of functional ferroelectric oxides with Multiwall Carbon Nanotubes for microelectronic applications, as for example potential 3 Dimensional (3D) Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Miniaturized electronics are ubiquitous now. The drive to downsize electronics has been spurred by needs of more performance into smaller packages at lower costs. But the trend of electronics miniaturization challenges board assembly materials, processes, and reliability. Semiconductor device and integrated circuit technology, coupled with its associated electronic packaging, forms the backbone of high-performance miniaturized electronic systems. However, as size decreases and functionalization increases in the modern electronics further size reduction is getting difficult; below a size limit the signal reliability and device performance deteriorate. Hence miniaturization of siliconbased electronics has limitations. On this background the Road Map for Semiconductor Industry (ITRS) suggests since 2011 alternative technologies, designated as More than Moore; being one of them based on carbon (carbon nanotubes (CNTs) and graphene) [1]. CNTs with their unique performance and three dimensionality at the nano-scale have been regarded as promising elements for miniaturized electronics [2]. CNTs are tubular in geometry and possess a unique set of properties, including ballistic electron transportation and a huge current caring capacity, which make them of great interest for future microelectronics [2]. Indeed CNTs might have a key role in the miniaturization of Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Moving from a traditional two dimensional (2D) design (as is the case of thin films) to a 3D structure (based on a tridimensional arrangement of unidimensional structures) will result in the high reliability and sensing of the signals due to the large contribution from the bottom electrode. One way to achieve this 3D design is by using CNTs. Ferroelectrics (FE) are spontaneously polarized and can have high dielectric constants and interesting pyroelectric, piezoelectric, and electrooptic properties, being a key application of FE electronic memories. However, combining CNTs with FE functional oxides is challenging. It starts with materials compatibility, since crystallization temperature of FE and oxidation temperature of CNTs may overlap. In this case low temperature processing of FE is fundamental. Within this context in this work a systematic study on the fabrication of CNTs - FE structures using low cost low temperature methods was carried out. The FE under study are comprised of lead zirconate titanate (Pb1-xZrxTiO3, PZT), barium titanate (BaTiO3, BT) and bismuth ferrite (BiFeO3, BFO). The various aspects related to the fabrication, such as effect on thermal stability of MWCNTs, FE phase formation in presence of MWCNTs and interfaces between the CNTs/FE are addressed in this work. The ferroelectric response locally measured by Piezoresponse Force Microscopy (PFM) clearly evidenced that even at low processing temperatures FE on CNTs retain its ferroelectric nature. The work started by verifying the thermal decomposition behavior under different conditions of the multiwall CNTs (MWCNTs) used in this work. It was verified that purified MWCNTs are stable up to 420 ºC in air, as no weight loss occurs under non isothermal conditions, but morphology changes were observed for isothermal conditions at 400 ºC by Raman spectroscopy and Transmission Electron Microscopy (TEM). In oxygen-rich atmosphere MWCNTs started to oxidized at 200 ºC. However in argon-rich one and under a high heating rate MWCNTs remain stable up to 1300 ºC with a minimum sublimation. The activation energy for the decomposition of MWCNTs in air was calculated to lie between 80 and 108 kJ/mol. These results are relevant for the fabrication of MWCNTs – FE structures. Indeed we demonstrate that PZT can be deposited by sol gel at low temperatures on MWCNTs. And particularly interesting we prove that MWCNTs decrease the temperature and time for formation of PZT by ~100 ºC commensurate with a decrease in activation energy from 68±15 kJ/mol to 27±2 kJ/mol. As a consequence, monophasic PZT was obtained at 575 ºC for MWCNTs - PZT whereas for pure PZT traces of pyrochlore were still present at 650 ºC, where PZT phase formed due to homogeneous nucleation. The piezoelectric nature of MWCNTs - PZT synthesised at 500 ºC for 1 h was proved by PFM. In the continuation of this work we developed a low cost methodology of coating MWCNTs using a hybrid sol-gel / hydrothermal method. In this case the FE used as a proof of concept was BT. BT is a well-known lead free perovskite used in many microelectronic applications. However, synthesis by solid state reaction is typically performed around 1100 to 1300 ºC what jeopardizes the combination with MWCNTs. We also illustrate the ineffectiveness of conventional hydrothermal synthesis in this process due the formation of carbonates, namely BaCO3. The grown MWCNTs - BT structures are ferroelectric and exhibit an electromechanical response (15 pm/V). These results have broad implications since this strategy can also be extended to other compounds of materials with high crystallization temperatures. In addition the coverage of MWCNTs with FE can be optimized, in this case with non covalent functionalization of the tubes, namely with sodium dodecyl sulfate (SDS). MWCNTs were used as templates to grow, in this case single phase multiferroic BFO nanorods. This work shows that the use of nitric solvent results in severe damages of the MWCNTs layers that results in the early oxidation of the tubes during the annealing treatment. It was also observed that the use of nitric solvent results in the partial filling of MWCNTs with BFO due to the low surface tension (<119 mN/m) of the nitric solution. The opening of the caps and filling of the tubes occurs simultaneously during the refluxing step. Furthermore we verified that MWCNTs have a critical role in the fabrication of monophasic BFO; i.e. the oxidation of CNTs during the annealing process causes an oxygen deficient atmosphere that restrains the formation of Bi2O3 and monophasic BFO can be obtained. The morphology of the obtained BFO nano structures indicates that MWCNTs act as template to grow 1D structure of BFO. Magnetic measurements on these BFO nanostructures revealed a week ferromagnetic hysteresis loop with a coercive field of 956 Oe at 5 K. We also exploited the possible use of vertically-aligned multiwall carbon nanotubes (VA-MWCNTs) as bottom electrodes for microelectronics, for example for memory applications. As a proof of concept BiFeO3 (BFO) films were in-situ deposited on the surface of VA-MWCNTs by RF (Radio Frequency) magnetron sputtering. For in situ deposition temperature of 400 ºC and deposition time up to 2 h, BFO films cover the VA-MWCNTs and no damage occurs either in the film or MWCNTs. In spite of the macroscopic lossy polarization behaviour, the ferroelectric nature, domain structure and switching of these conformal BFO films was verified by PFM. A week ferromagnetic ordering loop was proved for BFO films on VA-MWCNTs having a coercive field of 700 Oe. Our systematic work is a significant step forward in the development of 3D memory cells; it clearly demonstrates that CNTs can be combined with FE oxides and can be used, for example, as the next 3D generation of FERAMs, not excluding however other different applications in microelectronics.

Electromechanical properties of engineered lead free potassium sodium niobate based materials

K0.5Na0.5NbO3 (KNN), is the most promising lead free material for substituting lead zirconate titanate (PZT) which is still the market leader used for sensors and actuators. To make KNN a real competitor, it is necessary to understand and to improve its properties. This goal is pursued in the present work via different approaches aiming to study KNN intrinsic properties and then to identify appropriate strategies like doping and texturing for designing better KNN materials for an intended application. Hence, polycrystalline KNN ceramics (undoped, non-stoichiometric; NST and doped), high-quality KNN single crystals and textured KNN based ceramics were successfully synthesized and characterized in this work. Polycrystalline undoped, non-stoichiometric (NST) and Mn doped KNN ceramics were prepared by conventional ceramic processing. Structure, microstructure and electrical properties were measured. It was observed that the window for mono-phasic compositions was very narrow for both NST ceramics and Mn doped ceramics. For NST ceramics the variation of A/B ratio influenced the polarization (P-E) hysteresis loop and better piezoelectric and dielectric responses could be found for small stoichiometry deviations (A/B = 0.97). Regarding Mn doping, as compared to undoped KNN which showed leaky polarization (P-E) hysteresis loops, B-site Mn doped ceramics showed a well saturated, less-leaky hysteresis loop and a significant properties improvement. Impedance spectroscopy was used to assess the role of Mn and a relation between charge transport – defects and ferroelectric response in K0.5Na0.5NbO3 (KNN) and Mn doped KNN ceramics could be established. At room temperature the conduction in KNN which is associated with holes transport is suppressed by Mn doping. Hence Mn addition increases the resistivity of the ceramic, which proved to be very helpful for improving the saturation of the P-E loop. At high temperatures the conduction is dominated by the motion of ionized oxygen vacancies whose concentration increases with Mn doping. Single crystals of potassium sodium niobate (KNN) were grown by a modified high temperature flux method. A boron-modified flux was used to obtain the crystals at a relatively low temperature. XRD, EDS and ICP analysis proved the chemical and crystallographic quality of the crystals. The grown KNN crystals exhibit higher dielectric permittivity (29,100) at the tetragonal-to-cubic phase transition temperature, higher remnant polarization (19.4 μC/cm2) and piezoelectric coefficient (160 pC/N) when compared with the standard KNN ceramics. KNN single crystals domain structure was characterized for the first time by piezoforce response microscopy. It could be observed that <001> - oriented potassium sodium niobate (KNN) single crystals reveal a long range ordered domain pattern of parallel 180° domains with zig-zag 90° domains. From the comparison of KNN Single crystals to ceramics, It is argued that the presence in KNN single crystal (and absence in KNN ceramics) of such a long range order specific domain pattern that is its fingerprint accounts for the improved properties of single crystals. These results have broad implications for the expanded use of KNN materials, by establishing a relation between the domain patterns and the dielectric and ferroelectric response of single crystals and ceramics and by indicating ways of achieving maximised properties in KNN materials. Polarized Raman analysis of ferroelectric potassium sodium niobate (K0.5Na0.5)NbO3 (KNN) single crystals was performed. For the first time, an evidence is provided that supports the assignment of KNN single crystals structure to the monoclinic symmetry at room temperature. Intensities of A′, A″ and mixed A′+A″ phonons have been theoretically calculated and compared with the experimental data in dependence of crystal rotation, which allowed the precise determination of the Raman tensor coefficients for (non-leaking) modes in monoclinic KNN. In relation to the previous literature, this study clarifies that assigning monoclinic phase is more suitable than the orthorhombic one. In addition, this study is the basis for non-destructive assessments of domain distribution by Raman spectroscopy in KNN-based lead-free ferroelectrics with complex structures. Searching a deeper understanding of the electrical behaviour of both KNN single crystal and polycrystalline materials for the sake of designing optimized KNN materials, a comparative study at the level of charge transport and point defects was carried out by impedance spectroscopy. KNN single crystals showed lower conductivity than polycrystals from room temperature up to 200 ºC, but above this temperature polycrystalline KNN displays lower conductivity. The low temperature (T < 200 ºC) behaviour reflects the different processing conditions of both ceramics and single crystals, which account for less defects prone to charge transport in the case of single crystals. As temperature increases (T > 200 ºC) single crystals become more conductive than polycrystalline samples, in which grain boundaries act as barriers to charge transport. For even higher temperatures the conductivity difference between both is increased due to the contribution of ionic conduction in single crystals. Indeed the values of activation energy calculated to the high temperature range (T > 300 ºC) were 1.60 and 0.97 eV, confirming the charge transport due to ionic conduction and ionized oxygen vacancies in single crystals and polycrystalline KNN, respectively. It is suggested that single crystals with low defects content and improved electromechanical properties could be a better choice for room temperature applications, though at high temperatures less conductive ceramics may be the choice, depending on the targeted use. Aiming at engineering the properties of KNN polycrystals towards the performance of single crystals, the preparation and properties study of (001) – oriented (K0.5Na0.5)0.98Li0.02NbO3 (KNNL) ceramics obtained by templated grain growth (TGG) using KNN single crystals as templates was undertaken. The choice of KNN single crystals templates is related with their better properties and to their unique domain structure which were envisaged as a tool for templating better properties in KNN ceramics too. X-ray diffraction analysis revealed for the templated ceramics a monoclinic structure at room temperature and a Lotgering factor (f) of 40% which confirmed texture development. These textured ceramics exhibit a long range ordered domain pattern consisting of 90º and 180º domains, similar to the one observed in the single crystals. Enhanced dielectric (13017 at TC), ferroelectric (2Pr = 42.8 μC/cm2) and piezoelectric (d33 = 280 pC/N) properties are observed for textured KNNL ceramics as compared to the randomly oriented ones. This behaviour is suggested to be due to the long range ordered domain patterns observed in the textured ceramics. The obtained results as compared with the data previously reported on texture KNN based ceramics confirm that superior properties were found due to ordered repeated domain pattern. This study provides an useful approach towards properties improvement of KNN-based piezoelectric ceramics. Overall, the present results bring a significant contribution to the pool of knowledge on the properties of sodium potassium niobate materials: a relation between the domain patterns and di-, ferro-, and piezo-electric response of single crystals and ceramics was demonstrated and ways of engineering maximised properties in KNN materials, for example by texturing were established. This contribution is envisaged to have broad implications for the expanded use of KNN over the alternative lead-based materials.

Cultivo da Salicornia ramosissima da Ilha dos Puxadoiros®

O estágio realizado teve como premissa principal perceber o comportamento da planta face ao seu crescimento em altura da própria planta e em número em função de diferentes épocas de sementeira, e de condições de cultivo, nomeadamente de tipos de solo. O trabalho realizado inclui todo o processo desde a apanha, preparação das sementes e dos campos, e a sementeira propriamente dita. Foi acompanhado o crescimento das plantas em 3 alturas diferentes, por contagem do número de plantas e do comprimento das plantas aéreas. Igualmente foram realizadas análises da granulometria dos solos. Determinaram-se os metais pesados nos solos e nas plantas, assim como os açúcares após a hidrólise e derivatização das amostras liofilizadas, tanto da raíz como da parte aérea. Foi possível concluir que a planta nasce com maior abundância em solos franco-siltosos do que em solos franco-arenosos, onde o seu crescimento é muito pobre ou mesmo nulo. Os valores de cádmio e chumbo encontram-se a níveis adequados para o consumo humano. Coloca-se a hipótese da existência de arabinoglucoronoxilanas como constituinte da raiz desta planta.

Avaliação do potencial da Salicornia ramosissima para saladas frescas ou em pó (sal verde)

Dissertação de mest., Tecnologia dos Alimentos , Instituto Superior de Engenharia, Univ. do Algarve, 2013

Spectroscopic techniques for characterizing portuguese glazed ceramics:a contribution to the study of ancient faiences of Coimbra

Tese de doutoramento, Física, Universidade de Lisboa, Faculdade de Ciências, 2013

Quantificação de metais potencialmente tóxicos em mexilhão dourado (Limnoperna fortunei) por espectrometria de absorção atômica com fonte contínua e alta resolução empregando amostragem direta de sólidos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Dependência entre a performance de baterias VRLA e as características físico-químicas da matéria activa positiva

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Química e Biológica

Evolução hidrogeoquímica das águas sulfúreas de Entre-os-Rios: avaliação preliminar

O principal objectivo desta dissertação foi avaliar a evolução hidrogeoquímica das águas minerais de Entre‐os‐Rios, para uma melhor compreensão do modelo hidrogeológico conceptual deste sistema hidromineral. Desta forma, foram coligidos diversos dados hidroquímicos, quer das nascentes clássicas (Torre, Curveira, Ardias, Arcos Esquerda e Arcos Direita), quer do furo Barbeitos. Foram compiladas e analisadas oitenta análises hidroquímicas no período 1938‐2012, incluindo características organolépticas (cheiro, cor e turbidez), diversas propriedades físico-químicas (temperatura, pH, condutividade eléctrica, sulfuração, etc), os principais catiões e aniões (bicarbonato, fluoreto, sódio, lítio, etc) e os elementos vestigiários (chumbo, tungsténio, boro, etc). Além disso, foram integrados os dados históricos disponíveis de finais do século XIX e inícios do século XX. Foram igualmente reunidos e discutidos alguns dados isotópicos (oxigénio‐18, deutério e trítio). O recurso hidromineral de Entre‐os‐Rios está condicionado pela litologia e pelas condições tectónicas. As análises químicas revelaram que as águas minerais de Entre‐os‐Rios apresentam uma estabilidade química nos últimos 100 anos. Estas águas são orto‐ a hipertermais, fracamente mineralizadas, de reacção alcalina, sulfídricas, bicarbonatadas sódicas, carbonatadas e muito fluoretadas. Estas características são claramente distintas das águas normais da região. As águas de Entre‐os‐Rios são muito semelhantes às águas minerais de S. Vicente e, em diversos parâmetros, bastante diferentes das águas minerais das Caldas da Saúde. Os dados isotópicos permitiram concluir que as águas de Entre‐os‐Rios têm uma origem meteórica, com um tempo de residência longo no sistema aquífero, e que são, muito provavelmente, submodernas, com uma recarga anterior a 1952. Na região de Entre‐os‐Rios coexistem três sistemas aquíferos, um sistema granítico superficial, livre e um sistema livre a semi‐confinado, ambos com circulação de águas normais, e um sistema aquífero granítico, profundo, confinado, com circulação de água mineral.

O tratado de Lisboa no projecto de construção europeia

Dissertação de Mestrado em Ciência Política e Relações Internacionais – Especialização em Estudos Europeus