Atributos físicos nos tempos de adoção de manejos em Latossolo cultivado com soja

A condução das operações de preparo de forma inadequada ocasiona sérios problemas de conservação do solo, destacando-se a compactação, que acarreta a redução do espaço poroso, principalmente dos macroporos, e altera os atributos físico-hídricos. Este trabalho teve como objetivo verificar a influência dos diferentes sistemas e tempos de adoção de manejos em Latossolo Vermelho de Jaboticabal, Estado de São Paulo, por meio da densidade máxima, e correlacioná-la com a produtividade da soja, a densidade relativa e a umidade crítica de compactação. O delineamento experimental foi o inteiramente casualizado com parcelas subdivididas (cinco sistemas de uso e três camadas), com quatro repetições. Os cinco sistemas de uso foram: plantio direto por cino anos (SPD5), plantio direto por sete anos (SPD7), plantio direto por nove anos (SPD9), preparo convencional (SPC) e uma área adjacente de mata nativa (MN). As camadas do solo avaliadas foram as de 0-0,10, 0,10-0,20 e 0,20-0,30 m, nas quais foram determinados a densidade máxima do solo (Ds máx), a umidade crítica de compactação (Ugc), a densidade relativa do solo (Dsr), a composição granulométrica, a porosidade e o teor de matéria orgânica do solo. Os resultados mostraram que o comportamento das curvas de compactação do solo foi o mesmo em todas as camadas dos diferentes manejos e que os teores de matéria orgânica não justificaram as pequenas alterações da Ds máx. Para o Latossolo Vermelho, as operações mecanizadas nos sistemas de manejo podem ser executadas na faixa de 0,13 a 0,19 kg kg-1 de umidade sem causar degradação física. Verificou-se que a Dsr ótima e a umidade crítica de compactação foram de 0,86 e 0,15 kg kg-1, respectivamente, embora os diferentes sistemas e tempos de adoção de manejo tenham apresentado comportamento semelhante quanto à produtividade da soja.

Avaliação do uso do DCP em areias para controle da capacidade de carga em fundações diretas e controle de compactação de aterros

This work presents results of field and laboratory tests using a Dynamic Cone Penetrometer, DCP. The tests were performed in order to evaluate the use of the equipment in sand for the control of bearing capacity of shallow foundations and fill compaction. For shallow foundations, the laboratory tests were conducted on sand placed in a metallic mould by the method of sand pluviation. Although the results show the inability to reproduce field conditions in the laboratory it was possible to verify the ability of the DCP to identify less resistant soil layers. The DCP tests for the analysis of compaction control were performed in a strong box with inside dimensions of 1,40 m x 1,40 m and 0,70 m in height. The soil layers were compacted with different densities though the use of a vibrating plate in order to obtain correlations between penetration index, DPI, and soil relative density. Other tests were also conducted to assess the influence of soil moisture on tests results. Among other findings, the results showed the great potential for the use of DCP to control the compaction of sand fills

Otimização Topológica com Termo-elasticidade Utilizando Elementos Tri3

This work proposes a formulation for optimization of 2D-structure layouts submitted to mechanic and thermal shipments and applied an h-adaptive filter process which conduced to computational low spend and high definition structural layouts. The main goal of the formulation is to minimize the structure mass submitted to an effective state of stress of von Mises, with stability and lateral restriction variants. A criterion of global measurement was used for intents a parametric condition of stress fields. To avoid singularity problems was considerate a release on the stress restriction. On the optimization was used a material approach where the homogenized constructive equation was function of the material relative density. The intermediary density effective properties were represented for a SIMP-type artificial model. The problem was simplified by use of the method of finite elements of Galerkin using triangles with linear Lagrangian basis. On the solution of the optimization problem, was applied the augmented Lagrangian Method, that consists on minimum problem sequence solution with box-type restrictions, resolved by a 2nd orderprojection method which uses the method of the quasi-Newton without memory, during the problem process solution. This process reduces computational expends showing be more effective and solid. The results materialize more refined layouts with accurate topologic and shape of structure definitions. On the other hand formulation of mass minimization with global stress criterion provides to modeling ready structural layouts, with violation of the criterion of homogeneous distributed stress

Obtenção de cerâmicas à base de tricálcio fosfatos utilizando óxido de manganês como aditivo

The calcium phosphate ceramics have been very investigated as material for bone implants. The tricalcium phosphate (β-TCP) had a great potential for application in temporary implants like a resorbable bioceramic. This material presents a limitation in its sintering temperature due to occurrence of the allotropic transformation β → α at temperatures around 1200°C, not allowing the attainment of dense ceramic bodies. This transformation also causes cracks, what diminishes the mechanical strength, limiting its use to applications of low mechanical requests. This work studies the influence of the addition of manganese oxide in the sintering of β-TCP. Two processing routes were investigated. The first was the powder metallurgy conventional process. The test bodies (samples) were pressed and sintering at temperatures of 1200 and 1250°C. The second route was uniaxial hot pressing and its objective was to obtain samples with high relative density. The samples were physically characterized through density and porosity measurements. The thermal behavior was studied through dilatometric, thermal differential and thermogravimetric analysis. The mechanical properties were characterized by three point flexure test and Vickers microhardness measurements. The microstructure was analyzed by scanning electron microscopy. The addition of manganese oxide caused an improvement of the mechanical strength in relation to the material without additive and promoting the stabilization of β-TCP to greater temperatures

Otimização topológica de estruturas termoelásticas tridimensionais

This work presents an optimization technique based on structural topology optimization methods, TOM, designed to solve problems of thermoelasticity 3D. The presented approach is based on the adjoint method of sensitivity analysis unified design and is intended to loosely coupled thermomechanical problems. The technique makes use of analytical expressions of sensitivities, enabling a reduction in the computational cost through the use of a coupled field adjoint equation, defined in terms the of temperature and displacement fields. The TOM used is based on the material aproach. Thus, to make the domain is composed of a continuous distribution of material, enabling the use of classical models in nonlinear programming optimization problem, the microstructure is considered as a porous medium and its constitutive equation is a function only of the homogenized relative density of the material. In this approach, the actual properties of materials with intermediate densities are penalized based on an artificial microstructure model based on the SIMP (Solid Isotropic Material with Penalty). To circumvent problems chessboard and reduce dependence on layout in relation to the final optimal initial mesh, caused by problems of numerical instability, restrictions on components of the gradient of relative densities were applied. The optimization problem is solved by applying the augmented Lagrangian method, the solution being obtained by applying the finite element method of Galerkin, the process of approximation using the finite element Tetra4. This element has the ability to interpolate both the relative density and the displacement components and temperature. As for the definition of the problem, the heat load is assumed in steady state, i.e., the effects of conduction and convection of heat does not vary with time. The mechanical load is assumed static and distributed

Método de Otimização Topológica em Estruturas Tridimensionais

The topology optimization problem characterize and determine the optimum distribution of material into the domain. In other words, after the definition of the boundary conditions in a pre-established domain, the problem is how to distribute the material to solve the minimization problem. The objective of this work is to propose a competitive formulation for optimum structural topologies determination in 3D problems and able to provide high-resolution layouts. The procedure combines the Galerkin Finite Elements Method with the optimization method, looking for the best material distribution along the fixed domain of project. The layout topology optimization method is based on the material approach, proposed by Bendsoe & Kikuchi (1988), and considers a homogenized constitutive equation that depends only on the relative density of the material. The finite element used for the approach is a four nodes tetrahedron with a selective integration scheme, which interpolate not only the components of the displacement field but also the relative density field. The proposed procedure consists in the solution of a sequence of layout optimization problems applied to compliance minimization problems and mass minimization problems under local stress constraint. The microstructure used in this procedure was the SIMP (Solid Isotropic Material with Penalty). The approach reduces considerably the computational cost, showing to be efficient and robust. The results provided a well defined structural layout, with a sharpness distribution of the material and a boundary condition definition. The layout quality was proporcional to the medium size of the element and a considerable reduction of the project variables was observed due to the tetrahedrycal element

Composição florística da comunidade infestante em gramados de Paspalum notatum no município de Assis, SP

Os gramados de Paspalum notatum são os mais disseminados no Brasil, constituindo diferentes locais e propósitos. A infestação por plantas daninhas acarreta perda de qualidade estética quando a finalidade do gramado é ornamental. Com o objetivo de caracterizar a comunidade infestante em gramados de P. notatum no município de Assis/SP, foi realizado entre os meses de junho e julho de 2004 um levantamento florístico em áreas ensolaradas e sombreadas, sob copas de árvores. Cem amostras de 0,50 x 0,50 m foram coletadas nas duas condições de luminosidade (50 em áreas ensolaradas e 50 em áreas sombreadas), a partir das quais foram calculados os parâmetros freqüência, densidade, abundância, freqüência relativa, densidade relativa, abundância relativa e índice de valor de importância. Ao todo, foram identificadas 45 espécies de plantas daninhas, distribuídas em 15 famílias; Asteraceae apresentou o maior número de espécies nas condições ensolaradas e sombreadas. As espécies mais importantes nas áreas ensolaradas foram: Oxalis latifolia > Desmodium incanum > Cyperus flavus > Cyperus diffusus > Cyperus brevifolius; e nas áreas sombreadas: C. brevifolius > Alternanthera tenella > D. incanum > Elephantopus mollis > C. flavus. Para 80,0% das amostragens, a massa seca total da parte aérea das espécies de plantas daninhas não sofreu influência das condições ensolarada ou sombreada, constituindo uma produção máxima de aproximadamente 150 kg ha-1 para ambas as condições.

Physicochemical Characterization and Rheological Behavior Evaluation of the Liquid Crystalline Mesophases Developed with Different Silicones

This article presented physicochemical characterization and rheological behavior evaluation of the liquid crystalline mesophases developed with different silicones. There were prepared 5 ternary systems, which were carried out the determination of the relative density, the electric conductivity and polarized light microscopy analysis, being selected two systems to promote the Preliminary Stability Tests. The results showed that System 1 obtained the major liquid crystal formation and a higher stability. The temperature influences in the systems stability and phases structure. In hot oven, observed oneself the mixture of lamellar and hexagonal phase, for both systems.

Effect of cosurfactant on the supramolecular structure and physicochemical properties of non-ionic biocompatible microemulsions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alumina developed by pre-gelling starch consolidation (PSC)

In this paper, pre-gelling starch was used to consolidate alumina-dense ceramic suspensions. The colloidal processing of the ceramic was prepared with alumina and commercial potato starch, and slips were prepared with 55 vol% of solids and 0.5 wt.% of starch. This small amount of starch was possible because of a previous pre-gelling starch treatment, resulting in more homogeneous suspensions and particles smaller than starch granules. Additionally, Sucrose was also used as a dispersion aid. After sintering, the samples were analysed according to their mechanical properties. These processes produced ceramics with a 93% relative density, 325 MPa flexural strength, and a Weibull module whose value wits m = 10, maintaining the capacity of this process to produce complex geometric shaped ceramics. (C) 2008 Elsevier Ltd. All rights reserved.

Preparation of Al2TiO5-Al2O3 and Al2TiO5-Al2O3-TiO2 Ceramics by High-Energy Ball Milling and Sintering

The present work reports on the preparation of Al2O3-TiO2 ceramics by high-energy ball milling and sintering, varying the molar fraction in 1:1 and 3:1. The powder mixtures were processed in a planetary Fritsch P-5 ball mill using silicon nitride balls (10 mm diameter) and vials (225 mL), rotary speed of 250 rpm and a ball-to-powder weight ratio of 5:1. Samples were collected into the vial after different milling times. The milled powders were uniaxially compacted and sintered at 1300 and 1500 degrees C for 4h. The milled and sintered materials were characterized by X-ray diffraction and electron scanning microscopy (SEM). Results indicated that the intensity of Al2O3 and TiO2 peaks were reduced for longer milling times, suggesting that nanosized particles can be achieved. The densification of Al2O3-TiO2 ceramics was higher than 98% over the relative density in samples sintered at 1500 degrees C for 4h, which presented the formation of Al2TiO5.

Espectro e distribuição vertical das estratégias de dispersão de diásporos do componente arbóreo em uma floresta estacional no sul do Brasil

A dispersão de diásporos é um evento de elevada importância para as espécies vegetais, que dispõem de diversas estratégias para este fim. O presente estudo teve por objetivos conhecer e caracterizar o espectro das diferentes estratégias de dispersão do componente arbóreo em uma floresta estacional de Santa Maria, Rio Grande do Sul, Brasil (próximo às coordenadas 53º54'W e 29º38'S) e, a partir desses dados, investigar sua relação com os estratos verticais da floresta. Foram amostrados todos os indivíduos com perímetro à altura do peito > 15 cm, em 100 unidades amostrais de 10×10 m. A caracterização das estratégias de dispersão foi realizada por meio de observações a campo de frutos e potenciais dispersores, e consulta à bibliografia especializada. Foram amostradas 58 espécies pertencentes a 26 famílias botânicas. Dessas espécies, 74% apresentaram estratégia de dispersão zoocórica; 24%, estratégia de dispersão anemocórica e apenas Gymnanthes concolor Spreng. apresentou a estratégia autocórica. Analisando-se a proporção das estratégias de dispersão por meio da densidade relativa, verificou-se que 80% dos indivíduos são zoocóricos, 12% anemocóricos e 8% autocóricos. Para a floresta analisada foram encontradas diferenças significativas nos padrões de distribuição vertical das espécies agrupadas de acordo com a estratégia de dispersão. A zoocoria ocorreu em espécies de todos os estratos, enquanto a autocoria ficou limitada ao sub-bosque. Já a anemocoria foi mais importante entre as espécies com indivíduos emergentes.

Caracterização florística e fitossociológica do componente arbustivo-arbóreo de uma floresta paludosa no Município de Rio Claro (SP), Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Carbon Nuclear Magnetic Resonance Spectroscopic Profiles coupled to Partial Least-Squares Multivariate Regression for Prediction of Several Physicochemical Parameters of Brazilian Commercial Gasoline

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Multivariate calibrations on H-1 NMR profiles for prediction of physicochemical parameters of Brazilian commercial gasoline

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)