State of Logistics and Operations Management in Finnish and Swedish Companies – Survey Research Findings

In this research we are examining what is the status of logistics and operations management in Finnish and Swedish companies. Empirical data is based on the web based questionnaire, which was completed in the end of 2007 and early 2008. Our examination consists of roughly 30 answers from largest manufacturing (highest representation in our sample), trade and logistics/distribution companies. Generally it could be argued that these companies operate in complex environment, where number of products, raw materials/components and suppliers is high. However, usually companies rely on small amount of suppliers per raw material/component (highest frequency is 2), and this was especially the case among Swedish companies, and among those companies, which favoured overseas sourcing. Sample consisted of companies which mostly are operating in an international environment, and are quite often multinationals. Our survey findings reveal that companies in general have taken logistics and information technology as part of their strategy process; utilization of performance measures as well as system implementations have followed the strategy decisions. In the transportation mode side we identify that road transports dominate all transport flow classes (inbound, internal and outbound), followed by sea and air. Surprisingly small amount of companies use railways, but in general we could argue that Swedish companies prefer this mode over Finnish counterparts. With respect of operations outsourcing, we found that more traditional areas of logistics outsourcing are driving factors in company's performance measurement priority. In contrary to previous research, our results indicate that the scope of outsourcing is not that wide in logistics/operations management area, and companies are not planning to outsource more in the near future. Some support is found for more international operations and increased outsourcing activity. From the increased time pressure of companies, we find evidence that local as well as overseas customers expect deliveries within days or weeks, but suppliers usually supply within weeks or months. So, basically this leads into considerable inventory holding. Interestingly local and overseas sourcing strategy does not have that great influence on lead time performance of these particular sourcing areas - local strategy is anyway considerably better in responding on market changes due to shorter supply lead times. In the end of our research work we have completed correlation analysis concerning items asked with Likert scale. Our analysis shows that seeing logistics more like a process rather than function, applying time based management, favouring partnerships and measuring logistics within different performance dimensions results on preferred features and performance found in logistics literature.

Knowledge creation and transfer in an iterative project environment

This Master’s Thesis examines knowledge creation and transfer processes in an iterative project environment. The aim is to understand how knowledge is created and transferred during an actual iterative implementation project which takes place in International Business Machines (IBM). The second aim is to create and develop new working methods that support more effective knowledge creation and transfer for future iterative implementation projects. The research methodology in this thesis is qualitative. Using focus group interviews as a research method provides qualitative information and introduces the experiences of the individuals participating in the project. This study found that the following factors affect knowledge creation and transfer in an iterative, multinational, and multi-organizational implementation project: shared vision and common goal, trust, open communication, social capital, and network density. All of these received both theoretical and empirical support. As for future projects, strengthening these factors was found to be the key for more effective knowledge creation and transfer.

Assessing the use of very high resolution data to predict species distribution in a mountain environment

Nowadays, Species Distribution Models (SDMs) are a widely used tool. Using different statistical approaches these models reconstruct the realized niche of a species using presence data and a set of variables, often topoclimatic. There utilization range is quite large from understanding single species requirements, to the creation of nature reserve based on species hotspots, or modeling of climate change impact, etc... Most of the time these models are using variables at a resolution of 50km x 50km or 1 km x 1 km. However in some cases these models are used with resolutions below the kilometer scale and thus called high resolution models (100 m x 100 m or 25 m x 25 m). Quite recently a new kind of data has emerged enabling precision up to lm x lm and thus allowing very high resolution modeling. However these new variables are very costly and need an important amount of time to be processed. This is especially the case when these variables are used in complex calculation like models projections over large areas. Moreover the importance of very high resolution data in SDMs has not been assessed yet and is not well understood. Some basic knowledge on what drive species presence-absences is still missing. Indeed, it is not clear whether in mountain areas like the Alps coarse topoclimatic gradients are driving species distributions or if fine scale temperature or topography are more important or if their importance can be neglected when balance to competition or stochasticity. In this thesis I investigated the importance of very high resolution data (2-5m) in species distribution models using either very high resolution topographic, climatic or edaphic variables over a 2000m elevation gradient in the Western Swiss Alps. I also investigated more local responses of these variables for a subset of species living in this area at two precise elvation belts. During this thesis I showed that high resolution data necessitates very good datasets (species and variables for the models) to produce satisfactory results. Indeed, in mountain areas, temperature is the most important factor driving species distribution and needs to be modeled at very fine resolution instead of being interpolated over large surface to produce satisfactory results. Despite the instinctive idea that topographic should be very important at high resolution, results are mitigated. However looking at the importance of variables over a large gradient buffers the importance of the variables. Indeed topographic factors have been shown to be highly important at the subalpine level but their importance decrease at lower elevations. Wether at the mountane level edaphic and land use factors are more important high resolution topographic data is more imporatant at the subalpine level. Finally the biggest improvement in the models happens when edaphic variables are added. Indeed, adding soil variables is of high importance and variables like pH are overpassing the usual topographic variables in SDMs in term of importance in the models. To conclude high resolution is very important in modeling but necessitate very good datasets. Only increasing the resolution of the usual topoclimatic predictors is not sufficient and the use of edaphic predictors has been highlighted as fundamental to produce significantly better models. This is of primary importance, especially if these models are used to reconstruct communities or as basis for biodiversity assessments. -- Ces dernières années, l'utilisation des modèles de distribution d'espèces (SDMs) a continuellement augmenté. Ces modèles utilisent différents outils statistiques afin de reconstruire la niche réalisée d'une espèce à l'aide de variables, notamment climatiques ou topographiques, et de données de présence récoltées sur le terrain. Leur utilisation couvre de nombreux domaines allant de l'étude de l'écologie d'une espèce à la reconstruction de communautés ou à l'impact du réchauffement climatique. La plupart du temps, ces modèles utilisent des occur-rences issues des bases de données mondiales à une résolution plutôt large (1 km ou même 50 km). Certaines bases de données permettent cependant de travailler à haute résolution, par conséquent de descendre en dessous de l'échelle du kilomètre et de travailler avec des résolutions de 100 m x 100 m ou de 25 m x 25 m. Récemment, une nouvelle génération de données à très haute résolution est apparue et permet de travailler à l'échelle du mètre. Les variables qui peuvent être générées sur la base de ces nouvelles données sont cependant très coûteuses et nécessitent un temps conséquent quant à leur traitement. En effet, tout calcul statistique complexe, comme des projections de distribution d'espèces sur de larges surfaces, demande des calculateurs puissants et beaucoup de temps. De plus, les facteurs régissant la distribution des espèces à fine échelle sont encore mal connus et l'importance de variables à haute résolution comme la microtopographie ou la température dans les modèles n'est pas certaine. D'autres facteurs comme la compétition ou la stochasticité naturelle pourraient avoir une influence toute aussi forte. C'est dans ce contexte que se situe mon travail de thèse. J'ai cherché à comprendre l'importance de la haute résolution dans les modèles de distribution d'espèces, que ce soit pour la température, la microtopographie ou les variables édaphiques le long d'un important gradient d'altitude dans les Préalpes vaudoises. J'ai également cherché à comprendre l'impact local de certaines variables potentiellement négligées en raison d'effets confondants le long du gradient altitudinal. Durant cette thèse, j'ai pu monter que les variables à haute résolution, qu'elles soient liées à la température ou à la microtopographie, ne permettent qu'une amélioration substantielle des modèles. Afin de distinguer une amélioration conséquente, il est nécessaire de travailler avec des jeux de données plus importants, tant au niveau des espèces que des variables utilisées. Par exemple, les couches climatiques habituellement interpolées doivent être remplacées par des couches de température modélisées à haute résolution sur la base de données de terrain. Le fait de travailler le long d'un gradient de température de 2000m rend naturellement la température très importante au niveau des modèles. L'importance de la microtopographie est négligeable par rapport à la topographie à une résolution de 25m. Cependant, lorsque l'on regarde à une échelle plus locale, la haute résolution est une variable extrêmement importante dans le milieu subalpin. À l'étage montagnard par contre, les variables liées aux sols et à l'utilisation du sol sont très importantes. Finalement, les modèles de distribution d'espèces ont été particulièrement améliorés par l'addition de variables édaphiques, principalement le pH, dont l'importance supplante ou égale les variables topographique lors de leur ajout aux modèles de distribution d'espèces habituels.

Adjusting for the environment in DEA: a comparison of alternative models based on empirical data

Due to the existence of free software and pedagogical guides, the use of Data Envelopment Analysis (DEA) has been further democratized in recent years. Nowadays, it is quite usual for practitioners and decision makers with no or little knowledge in operational research to run their own efficiency analysis. Within DEA, several alternative models allow for an environmental adjustment. Four alternative models, each user-friendly and easily accessible to practitioners and decision makers, are performed using empirical data of 90 primary schools in the State of Geneva, Switzerland. Results show that the majority of alternative models deliver divergent results. From a political and a managerial standpoint, these diverging results could lead to potentially ineffective decisions. As no consensus emerges on the best model to use, practitioners and decision makers may be tempted to select the model that is right for them, in other words, the model that best reflects their own preferences. Further studies should investigate how an appropriate multi-criteria decision analysis method could help decision makers to select the right model.

Implementing Role Based Access Control into the Enterprise Environment to Support Business and IT Functions

The thesis studies role based access control and its suitability in the enterprise environment. The aim is to research how extensively role based access control can be implemented in the case organization and how it support organization’s business and IT functions. This study points out the enterprise’s needs for access control, factors of access control in the enterprise environment and requirements for implementation and the benefits and challenges it brings along. To find the scope how extensively role based access control can be implemented into the case organization, firstly is examined the actual state of access control. Secondly is defined a rudimentary desired state (how things should be) and thirdly completed it by using the results of the implementation of role based access control application. The study results the role model for case organization unit, and the building blocks and the framework for the organization wide implementation. Ultimate value for organization is delivered by facilitating the normal operations of the organization whilst protecting its information assets.

Mercury analysis in hair: comparability and quality assessment within the transnational COPHES/DEMOCOPHES project

Human biomonitoring (HBM) is an effective tool for assessing actual exposure to chemicals that takes into account all routes of intake. Although hair analysis is considered to be an optimal biomarker for assessing mercury exposure, the lack of harmonization as regards sampling and analytical procedures has often limited the comparison of data at national and international level. The European-funded projects COPHES and DEMOCOPHES developed and tested a harmonized European approach to Human Biomonitoring in response to the European Environment and Health Action Plan. Herein we describe the quality assurance program (QAP) for assessing mercury levels in hair samples from more than 1800 mother-child pairs recruited in 17 European countries. To ensure the comparability of the results, standard operating procedures (SOPs) for sampling and for mercury analysis were drafted and distributed to participating laboratories. Training sessions were organized for field workers and four external quality-assessment exercises (ICI/EQUAS), followed by the corresponding web conferences, were organized between March 2011 and February 2012. ICI/EQUAS used native hair samples at two mercury concentration ranges (0.20-0.71 and 0.80-1.63) per exercise. The results revealed relative standard deviations of 7.87-13.55% and 4.04-11.31% for the low and high mercury concentration ranges, respectively. A total of 16 out of 18 participating laboratories the QAP requirements and were allowed to analyze samples from the DEMOCOPHES pilot study. Web conferences after each ICI/EQUAS revealed this to be a new and effective tool for improving analytical performance and increasing capacity building. The procedure developed and tested in COPHES/DEMOCOPHES would be optimal for application on a global scale as regards implementation of the Minamata Convention on Mercury.

Partnering in the Dynamic Environment: The Role of Trust in Asymmetric Technology Partnership Formation

The purpose of this study was to increase the understanding of the role and nature of trust in asymmetric technology partnership formation. In the knowledge-based "learning race" knowledge is considered as a primary source for competitive advantage. In the emerging ICT sector the high pace of technological change, the convergence of technologies and industries as well as the increasing complexity and uncertainty have forced even the largest players to seek cooperation for complementary knowledge and capabilities. Small technology firms need the complementary resources and legitimacy of the large firms to grow and compete in the global market place. Most of the earlier research indicates, however, that partnerships with asymmetric size, managerial resources and cultures have failed. A basic assumption supported by earlier research was that trust is a critical factor in asymmetric technology partnership formation. Asymmetric technology partnership formation is a dynamic and multi-dimensional process, and consequently a holistic research approach was selected. Research issue was approached from different levels: the individual decision-maker, the firm and the relationship between the parties. Also the impact of the dynamic environment and technology content was analyzed. A multitheoretical approach and a qualitative research method with in-depth interviews in five large ICT companies and eight small ICT companies enabled a holistic and rich view of the research issue. Study contributes on the scarce understanding on the nature and evolution of trust in asymmetric technology partnership formation. It sheds also light on the specific nature of asymmetric technology partnerships. The partnerships were found to be tentative and the diverse strategic intent of small and large technology firms appeared as a major challenge. The role of the boundary spanner was highlighted as a possibility to match the incompatible organizational cultures. A shared vision was found to be a pre-condition for individual-based fast trust leading to intuitive decision-making and experimentation. The relationships were tentative and they were continuously re-evaluated through the key actors' sense making of the technology content, asymmetry and the dynamic environment. A multi-dimensional conceptualization for trust was created and propositions on the role and nature of trust for further research are given. The purpose of this study was to increase the understanding of the role and nature of trust in asymmetric technology partnership formation. In the knowledge-based "learning race" knowledge is considered as a primary source for competitive advantage. In the emerging ICT sector the high pace of technological change, the convergence of technologies and industries as well as the increasing complexity and uncertainty have forced even the largest players to seek cooperation for complementary knowledge and capabilities. Small technology firms need the complementary resources and legitimacy of the large firms to grow and compete in the global market place. Most of the earlier research indicates, however, that partnerships with asymmetric size, managerial resources and cultures have failed. A basic assumption supported by earlier research was that trust is a critical factor in asymmetric technology partnership formation. Asymmetric technology partnership formation is a dynamic and multi-dimensional process, and consequently a holistic research approach was selected. Research issue was approached from different levels: the individual decision-maker, the firm and the relationship between the parties. Also the impact of the dynamic environment and technology content was analyzed. A multitheoretical approach and a qualitative research method with in-depth interviews in five large ICT companies and eight small ICT companies enabled a holistic and rich view of the research issue. Study contributes on the scarce understanding on the nature and evolution of trust in asymmetric technology partnership formation. It sheds also light on the specific nature of asymmetric technology partnerships. The partnerships were found to be tentative and the diverse strategic intent of small and large technology firms appeared as a major challenge. The role of the boundary spanner was highlighted as a possibility to match the incompatible organizational cultures. A shared vision was found to be a pre-condition for individual-based fast trust leading to intuitive decision-making and experimentation. The relationships were tentative and they were continuously re-evaluated through the key actors' sense making of the technology content, asymmetry and the dynamic environment. A multi-dimensional conceptualization for trust was created and propositions on the role and nature of trust for further research are given.

Capability matrix – Identifying and evaluating the key capabilities of purchasing and supply management

Organizations gain resources, skills and technologies to find out the ultimate mix of capabilities to be a winner in the competitive market. These are all important factors that need to be taken into account in organizations operating in today's business environment. So far, there are no significant studies on the organizational capabilities in the field of PSM. The literature review shows that the PSM capabilities need to be studied more comprehensively. This study attempts to reveal and fill this gap by providing the PSM capability matrix that identifies the key PSM capabilities approached from two angles: there are three primary PSM capabilities and nine subcapabilities and, moreover, the individual and organizational PSM capabilities are identified and evaluated. The former refers to the PSM capability matrix of this study which is based on the strategic and operative PSM capabilities that complement the economic ones, while the latter relates to the evaluation of the PSM capabilities, such as the buyer profiles of individual PSM capabilities and the PSMcapability map of the organizational ones. This is a constructive case study. The aim is to define what the purchasing and supply management capabilities are and how they can be evaluated. This study presents a PSM capability matrix to identify and evaluate the capabilities to define capability gaps by comparing the ideal level of PSM capabilities to the realized ones. The research questions are investigated with two case organizations. This study argues that PSM capabilities can be classified into three primary categories with nine sub-categories and, thus, a PSM capability matrix with four evaluation categories can be formed. The buyer profiles are moreover identified to reveal the PSM capability gap. The resource-based view (RBV) and dynamic capabilities view (DCV) are used to define the individual and organizational capabilities. The PSM literature is also used to define the capabilities. The key findings of this study are i) the PSM capability matrix to identify the PSM capabilities, ii) the evaluation of the capabilities to define PSM capability gaps and iii) the presentation of the buyer profiles to identify the individual PSM capabilities and to define the organizational PSM capabilities. Dynamic capabilities are also related to the PSM capability gap. If a gap is identified, the organization can renew their PSM capabilities and, thus, create mutual learning and increase their organizational capabilities. And only then, there is potential for dynamic capabilities. Based on this, the purchasing strategy, purchasing policy and procedures should be identified and implemented dynamically.

Operational Reliability Analysis of a Three-Tiered Thin-Client ERP-system in an International Corporate Environment

Internationalization and the following rapid growth have created the need to concentrate the IT systems of many small-to-medium-sized production companies. Enterprise Resource Planning systems are a common solution for such companies. Deployment of these ERP systems consists of many steps, one of which is the implementation of the same shared system at all international subsidiaries. This is also one of the most important steps in the internationalization strategy of the company from the IT point of view. The mechanical process of creating the required connections for the off-shore sites is the easiest and most well-documented step along the way, but the actual value of the system, once operational, is perceived in its operational reliability. The operational reliability of an ERP system is a combination of many factors. These factors vary from hardware- and connectivity-related issues to administrative tasks and communication between decentralized administrative units and sites. To accurately analyze the operational reliability of such system, one must take into consideration the full functionality of the system. This includes not only the mechanical and systematic processes but also the users and their administration. All operational reliability in an international environment relies heavily on hardware and telecommunication adequacy so it is imperative to have resources dimensioned with regard to planned usage. Still with poorly maintained communication/administration schemes no amount of bandwidth or memory will be enough to maintain a productive level of reliability. This thesis work analyzes the implementation of a shared ERP system to an international subsidiary of a Finnish production company. The system is Microsoft Dynamics Ax, currently being introduced to a Slovakian facility, a subsidiary of Peikko Finland Oy. The primary task is to create a feasible base of analysis against which the operational reliability of the system can be evaluated precisely. With a solid analysis the aim is to give recommendations on how future implementations are to be managed.

Evaluation du risque de récidive dans les expertises pénales: quels outils? Quets indicateurs? Quelles pratiques [Risk assessment in forensic psychiatric reports: what kind assessment instrument? What indicator? What practical?].

Here we present results of studies conducted by the Research Unit of Legal Psychiatry and Psychology of Lausanne about risk assessment and protective factors in the evaluation of violence recidivism. It aims to help experts in considering the relevance and use of tools at their disposal. Particular attention is given to the significance of protective factors and impulsive dimensions, as to the inter-raters process that leads to the final deliberations.

Geospatial approach for defining the Wildland-Urban Interface in the Alpine environment

Problems related to fire hazard and fire management have become in recent decades one of the most relevant issues in the Wildland-Urban Interface (WUI), that is the area where human infrastructures meet or intermingle with natural vegetation. In this paper we develop a robust geospatial method for defining and mapping the WUI in the Alpine environment, where most interactions between infrastructures and wildland vegetation concern the fire ignition through human activities, whereas no significant threats exist for infrastructures due to contact with burning vegetation. We used the three Alpine Swiss cantons of Ticino, Valais and Grisons as the study area. The features representing anthropogenic infrastructures (urban or infrastructural components of the WUI) as well as forest cover related features (wildland component of the WUI) were selected from the Swiss Topographic Landscape Model (TLM3D). Georeferenced forest fire occurrences derived from the WSL Swissfire database were used to define suitable WUI interface distances. The Random Forest algorithm was applied to estimate the importance of predictor variables to fire ignition occurrence. This revealed that buildings and drivable roads are the most relevant anthropogenic components with respect to fire ignition. We consequently defined the combination of drivable roads and easily accessible (i.e. 100 m from the next drivable road) buildings as the WUI-relevant infrastructural component. For the definition of the interface (buffer) distance between WUI infrastructural and wildland components, we computed the empirical cumulative distribution functions (ECDF) of the percentage of ignition points (observed and simulated) arising at increasing distances from the selected infrastructures. The ECDF facilitates the calculation of both the distance at which a given percentage of ignition points occurred and, in turn, the amount of forest area covered at a given distance. Finally, we developed a GIS ModelBuilder routine to map the WUI for the selected buffer distance. The approach was found to be reproducible, robust (based on statistical analyses for evaluating parameters) and flexible (buffer distances depending on the targeted final area covered) so that fire managers may use it to detect WUI according to their specific priorities.

Reuse of information for selection of methods and operating conditions for drying of pharmaceutical materials

Drying is a major step in the manufacturing process in pharmaceutical industries, and the selection of dryer and operating conditions are sometimes a bottleneck. In spite of difficulties, the bottlenecks are taken care of with utmost care due to good manufacturing practices (GMP) and industries' image in the global market. The purpose of this work is to research the use of existing knowledge for the selection of dryer and its operating conditions for drying of pharmaceutical materials with the help of methods like case-based reasoning and decision trees to reduce time and expenditure for research. The work consisted of two major parts as follows: Literature survey on the theories of spray dying, case-based reasoning and decision trees; working part includes data acquisition and testing of the models based on existing and upgraded data. Testing resulted in a combination of two models, case-based reasoning and decision trees, leading to more specific results when compared to conventional methods.

Regenerated cellulose ultrafiltration membranes in the treatment of pulp and paper mill process waters

Ultrafiltration (UF) is widely applied in different separation processes in the pulp and paper industry. The growing need to protect the environment, a lack of pure water and an interest in producing high-value chemicals from compounds present in process waters will probably lead to an increase in the use of UF in the pulp and paper industry. The efficiency and cost-effectiveness of a UF process depends on the applied membrane. The membrane should have a high and stable filtration capacity, a particular selectivity and a long operational lifetime. To meet these requirements a membrane should have a low fouling tendency. In addition, it should withstand the prevailing operational and chemical conditions. This thesis evaluates the performance and applicability of the regenerated cellulose (RC) membranes 00030T and C2 in the treatment of pulp and paper mill process waters based on the requirements above. The results demonstrated that both the tested RC membranes fulfilled well the requirement of high filtration capacity. In addition, in the filtration of a paper mill clear filtrate (CF) the RC membranes were not as greatly affected by variations in the CF quality as a polysulphone membrane. Furthermore, due to their extreme hydrophilicity and weak charge the fouling tendency of the membranes can be expected to be low in pulp and paper mill filtration applications. It is, however, known that fouling cannot be totally avoided even when the membrane is chosen very carefully. This study indicated that carbohydrates influenced negatively on permeability and caused fouling in the filtration of groundwood mill circulation water. Thus, a pre-treatment effectively reducing the amount of carbohydrates might help to maintain a stable capacity. However, the results of the thesis also showed that the removal of some of the possible foulants might just increase the harmful effect of others. Multivariate examination was useful in the understanding of the complicated factors causing the unstable capacity. The thesis also revealed that the 00030T and C2 membranes can be used at high pressure (max. tested pressure 12 bar). The C2 membrane, having a sponge-like substructure, was more pressure resistant, and its performance was more stable at high pressure compared to the UCO30T membrane containing macrovoids in its substructure. Both tested membranes can, according to the results, also be used at temperatures as high as 70°C in acidic, neutral and alkaline conditions. However, the use at extreme conditions might cause faster ageing of the membranes compared to ageing in neutral conditions. The thesis proved that both the tested RC membranes are very suitable for pulp and paper mill applications and that the membranes can be utilised in processes operating in challenging conditions. Thus, they could be used in more demanding applications than supposed earlier.

Innovatiivisuuden merkitys yrityksessä ja alueellinen innovaatioympäristö

Innovaatioista on viime aikoina tullut entistä tärkeämpiä kilpailukyvyn lähteitä kansantalouksille sekä niiden sisällä toimiville alueille. Innovaatiotoiminta on nostettu yhdeksi keskeisimmistä tekijöistä yritysten sekä alueiden välisessä kilpailussa. Tässä tutkimuksessa selvitetään, ovatko innovatiiviset yritykset menestyneet muita saman toimialan yrityksiä paremmin ja mikä on ollut alueellisen innovaatioympäristön osuus niiden menestyksessä tai menestymättömyydessä? Tutkimuksessa perehdytään ensin aihealueeseen teoriatiedon sekä aiempien tutkimustulosten avulla. Tutkimuksen empiirisessä osuudessa mukana on ollut yhteensä 36 eteläsavolaista yritystä, jotka toimivat yhteensä seitsemällä eri toimialalla. Jokaisessa yrityksessä on käyty paikan päällä tekemässä syvähaastattelu. Yritysten menestystä mitattiin kasvua, kannattavuutta sekä pääomarakennetta kuvaavien tunnuslukujen avulla. Tunnuslukujen perusteella saatuja tuloksia syvennettiin haastattelujen tuloksilla. Tutkimuksessa havaittiin, että innovatiiviset yritykset olivat menestyneet hieman muita yrityksiä paremmin, mutta ero vertailuryhmien välillä ei ollut kovin suuri. Lisäksi havaittiin, ettei innovatiivisuus takaa yritykselle hyvää menestystä, vaan lähinnä antaa vain mahdollisuuden poikkeukselliseen menestymiseen. Innovaatioympäristönä Etelä-Savoa pidettiin yritysten innovaatiotoimintaa tukevana, mutta myös kehitettävää löytyi. Alueellisen innovaatioympäristön tärkeimpinä kehityskohteina nousivat esiin julkisten innovaatiopalveluiden sekä yritysten välisen yhteistyön toimivuus ja innovatiivisen miljöön luominen alueelle.

Patterns of variability of retinol levels in a harbour porpoise population from an unpolluted environment

Organochlorine compounds (OC) are known to induce vitamin A (retinoids) deficiency in mammals, which may be associated with impairment of immunocompetence, reproduction and growth. This makes retinoids a potentially useful biomarker of organochlorine impact on marine mammals. However, use of retinoids as a biomarker requires knowledge about its intrapopulation patterns of variation in natural conditions, information which is not currently available. We investigated these patterns in a cetacean population living in an unpolluted environment. 100 harbour porpoises Phocoena phocoena from West Greenland were sampled during the 1995 hunting season. Sex, age, morphometrics, nutritive condition, and retinol (following saponification) and OC levels in blubber were determined for each individual. OC levels found were extremely low and therefore considered unlikely to affect the population adversely: mean blubber concentrations, expressed on an extractable basis, were 2.04 (SD = 1.1) ppm for PCBs and 2.76 (SD = 1.66) ppm for tDDT. The mean blubber retinol concentration for the overall population was 59.66 (SD = 45.26) mu g g(-1). Taking into account the high contribution of blubber to body mass, blubber constitutes a significant body site for retinoid deposition in harbour porpoises. Retinol concentrations did not differ significantly between geographical regions or sexes, but they did correlate significantly (p <0.001) with age. Body condition, measured by determining the lipid content of the blubber, did not have a significant effect on retinol levels but the individuals examined were considered to be in an overall good nutritive condition. It is concluded that measurement of retinol concentrations in blubber samples is feasible and has a potential for use as a biomarker of organochlorine exposure in cetaceans. However, in order to do so, biological information, particularly age, is critical for the correct assessment of physiological impact