Strength and damage analysis of composite-aluminium adhesively-bonded single-lap joints

With the need to find an alternative way to mechanical and welding joints, and at the same time to overcome some limitations linked to these traditional techniques, adhesive bonds can be used. Adhesive bonding is a permanent joining process that uses an adhesive to bond the components of a structure. Composite materials reinforced with fibres are becoming increasingly popular in many applications as a result of a number of competitive advantages. In the manufacture of composite structures, although the fabrication techniques reduce to the minimum by means of advanced manufacturing techniques, the use of connections is still required due to the typical size limitations and design, technological and logistical aspects. Moreover, it is known that in many high performance structures, unions between composite materials with other light metals such as aluminium are required, for purposes of structural optimization. This work deals with the experimental and numerical study of single lap joints (SLJ), bonded with a brittle (Nagase Chemtex Denatite XNRH6823) and a ductile adhesive (Nagase Chemtex Denatite XNR6852). These are applied to hybrid joints between aluminium (AL6082-T651) and carbon fibre reinforced plastic (CFRP; Texipreg HS 160 RM) adherends in joints with different overlap lengths (LO) under a tensile loading. The Finite Element (FE) Method is used to perform detailed stress and damage analyses allowing to explain the joints’ behaviour and the use of cohesive zone models (CZM) enables predicting the joint strength and creating a simple and rapid design methodology. The use of numerical methods to simulate the behaviour of the joints can lead to savings of time and resources by optimizing the geometry and material parameters of the joints. The joints’ strength and failure modes were highly dependent on the adhesive, and this behaviour was successfully modelled numerically. Using a brittle adhesive resulted in a negligible maximum load (Pm) improvement with LO. The joints bonded with the ductile adhesive showed a nearly linear improvement of Pm with LO.

Estudo e Avaliação de Plataformas de Business Intelligence em contexto empresarial

O crescente interesse pela área de Business Intelligence (BI) tem origem no reconhecimento da sua importância pelas organizações, como poderoso aliado dos processos de tomada de decisão. O BI é um conceito dinâmico, que se amplia à medida que são integradas novas ferramentas, em resposta a necessidades emergentes dos mercados. O BI não constitui, ainda, uma realidade nas pequenas e médias empresas, sendo, até, desconhecido para muitas. São, essencialmente, as empresas de maior dimensão, com presença em diferentes mercados e/ou áreas de negócio mais abrangentes, que recorrem a estas soluções. A implementação de ferramentas BI nas organizações depende, pois, das especificidades destas, sendo fundamental que a informação sobre as plataformas disponíveis e suas funcionalidades seja objetiva e inequívoca. Só uma escolha correta, que responda às necessidades da área de negócio desenvolvida, permitirá obter dados que resultem em ganhos, potenciando a vantagem competitiva empresarial. Com este propósito, efectua-se, na presente dissertação, uma análise comparativa das funcionalidades existentes em diversas ferramentas BI, que se pretende que venha auxiliar os processos de seleção da plataforma BI mais adaptada a cada organização e/ou negócio. As plataformas BI enquadram-se em duas grandes vertentes, as que implicam custos de aquisição, de índole comercial, e as disponibilizadas de forma livre, ou em código aberto, designadas open source. Neste sentido, equaciona-se se estas últimas podem constituir uma opção válida para as empresas com recursos mais escassos. Num primeiro momento, procede-se à implementação de tecnologias BI numa organização concreta, a operar na indústria de componentes automóveis, a Yazaki Saltano de Ovar Produtos Eléctricos, Ltd., implantada em Portugal há mais de 25 anos. Para esta empresa, o desenvolvimento de soluções com recurso a ferramentas BI afigura-se como um meio adequado de melhorar o acompanhamento aos seus indicadores de performance. Este processo concretizou-se a partir da stack tecnológica pré-existente na organização, a plataforma BI comercial da Microsoft. Com o objetivo de, por um lado, reunir contributos que possibilitem elucidar as organizações na escolha da plataforma BI mais adequada e, por outro, compreender se as plataformas open source podem constituir uma alternativa credível às plataformas comerciais, procedeu-se a uma pesquisa comparativa das funcionalidades das várias plataformas BI open source. Em resultado desta análise, foram selecionadas duas plataformas, a SpagoBI e a PentahoBI, utilizadas na verificação do potencial alternativo das open source face às plataformas comerciais. Com base nessas plataformas, reproduziu-se os processos e procedimentos desenvolvidos no âmbito do projeto de implementação BI realizado na empresa Yazaki Saltano.

Gestão da performance na cadeia de abastecimento lean: desenvolvimento de uma framework baseada no balanced scorecard

Dissertação para obtenção do Grau de Mestre em Engenharia e Gestão Industrial

PERFORMANCE OF CONVENTIONAL PCRs BASED ON PRIMERS DIRECTED TO NUCLEAR AND MITOCHONDRIAL GENES FOR THE DETECTION AND IDENTIFICATION OF Leishmania spp.

In visceral leishmaniasis, the detection of the agent is of paramount importance to identify reservoirs of infection. Here, we evaluated the diagnostic attributes of PCRs based on primers directed to cytochrome-B (cytB), cytochrome-oxidase-subunit II (coxII), cytochrome-C (cytC), and the minicircle-kDNA. Although PCRs directed to cytB, coxII, cytC were able to detect different species of Leishmania, and the nucleotide sequence of their amplicons allowed the unequivocal differentiation of species, the analytical and diagnostic sensitivity of these PCRs were much lower than the analytical and diagnostic sensitivity of the kDNA-PCR. Among the 73 seropositive animals, the asymptomatic dogs had spleen and bone marrow samples collected and tested; only two animals were positive by PCRs based on cytB, coxII, and cytC, whereas 18 were positive by the kDNA-PCR. Considering the kDNA-PCR results, six dogs had positive spleen and bone marrow samples, eight dogs had positive bone marrow results but negative results in spleen samples and, in four dogs, the reverse situation occurred. We concluded that PCRs based on cytB, coxII, and cytC can be useful tools to identify Leishmania species when used in combination with automated sequencing. The discordance between the results of the kDNA-PCR in bone marrow and spleen samples may indicate that conventional PCR lacks sensitivity for the detection of infected dogs. Thus, primers based on the kDNA should be preferred for the screening of infected dogs.

Competitive Intelligence como fonte de vantagem competitiva: estudo exploratório sobre o sector Português de Biotecnologia

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação

Numerical Evaluation of Ventilation Performance in Children Day Care Centres

Modelling of ventilation is strongly dependent on the physical characteristics of the building of which precise evaluation is a complex and time consuming task. In the frame of a research project, two children day care centres (CDCC) have been selected in order to measure the envelope air permeability, the flow rate of mechanical ventilation systems and indoor and outdoor temperature. The data obtained was used as input to the computer code CONTAM for ventilation simulations. The results obtained were compared with direct measurements of ventilation flow from short term measurements with CO2 tracer gas and medium term measurements with perfluorocarbon tracer (PFT) gas decay method. After validation, in order to analyse the main parameters that affect ventilation, the model was used to predict the ventilation rates for a wide range of conditions. The purpose of this assessment was to find the best practices to improve natural ventilation. A simple analytical method to predict the ventilation flow rate of rooms is also presented. The method is based on the estimation of wind effect on the room through the evaluation of an average factor and on the assessment of relevant cross section of gaps and openings combined in series or in parallel. It is shown that it may be applied with acceptable accuracy for this type of buildings when ventilation is due essentially to wind action.

Tão perto do silêncio: memória, performance e exílio entre refugiados e requerentes de asilo em Portugal (documentário)

Trabalho de Projecto apresentado para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Antropologia – Culturas Visuais

The effect of demand information sharing in a supply chain under demand uncertainty: a simulation study

Dissertação para obtenção do Grau de Mestre em Engenharia e Gestão Industrial

Strategies for the enhancement of the catalytic performance of cutinase in nonaqueous media

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Portugal Telecom’s strategic partnership with Oi: The value creation potential

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Innovation at Polisport: Discoverding the drivers and impact on performance at a Portuguese SME

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Cofemel´s internationalization plan to Poland

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics.

Designing and implementing a performance: The case of Estomeo – Dental Industry

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Mota-Engil: A solution to turnover its negative stock market performance

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Leader succession: The impact of leaders’ background characteristics on organizations’ performance

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics