Satisfaction and acceptance with learning management systems

More and more often, universities make the decision to implement integrated learning management systems. Nevertheless, these technological developments are not realized without any trouble, and are achieved with more or less success and user satisfaction (Valenduc, 2000). It is why the presented study aims at identifying the factors influencing learning management system satisfaction and acceptance among students. The Technology Acceptance model created by Wixom and Todd (2005) studies information system acceptance through user satisfaction, and has the benefit of incorporating several ergonomic factors. More precisely, the survey, based on this model, investigates behavioral attitudes towards the system, perceived ease of use, perceived usefulness, as well as system satisfaction, information satisfaction and also incorporates two groups of factors affecting separately the two types of satisfaction. The study was conducted on a representative sample of 593 students from a Brussels university which had recently implemented an integrated learning management system. The results show on one hand, the impact of system reliability, accessibility, flexibility, lay-out and functionalities offered on system satisfaction. And on the other hand, the impact of information accuracy, intelligibility, relevance, exhaustiveness and actualization on information satisfaction. In conclusion, the results indicate the applicability of the theoretical model with learning management systems, and also highlight the importance of each aforementioned factor for a successful implantation of such a system in universities.

Assessing variability and long-term trends in burned area by merging multiple satellite fire products

Long term, high quality estimates of burned area are needed for improving both prognostic and diagnostic fire emissions models and for assessing feedbacks between fire and the climate system. We developed global, monthly burned area estimates aggregated to 0.5° spatial resolution for the time period July 1996 through mid-2009 using four satellite data sets. From 2001ĝ€ "2009, our primary data source was 500-m burned area maps produced using Moderate Resolution Imaging Spectroradiometer (MODIS) surface reflectance imagery; more than 90% of the global area burned during this time period was mapped in this fashion. During times when the 500-m MODIS data were not available, we used a combination of local regression and regional regression trees developed over periods when burned area and Terra MODIS active fire data were available to indirectly estimate burned area. Cross-calibration with fire observations from the Tropical Rainfall Measuring Mission (TRMM) Visible and Infrared Scanner (VIRS) and the Along-Track Scanning Radiometer (ATSR) allowed the data set to be extended prior to the MODIS era. With our data set we estimated that the global annual area burned for the years 1997ĝ€ "2008 varied between 330 and 431 Mha, with the maximum occurring in 1998. We compared our data set to the recent GFED2, L3JRC, GLOBCARBON, and MODIS MCD45A1 global burned area products and found substantial differences in many regions. Lastly, we assessed the interannual variability and long-term trends in global burned area over the past 13 years. This burned area time series serves as the basis for the third version of the Global Fire Emissions Database (GFED3) estimates of trace gas and aerosol emissions.

Multi-touch accceptance: perceived disorientation and consequences on task engagement

The research project takes place within the technology acceptability framework which tries to understand the use made of new technologies, and concentrates more specifically on the factors that influence multi-touch devices’ (MTD) acceptance and intention to use. Why be interested in MTD? Nowadays, this technology is used in all kinds of human activities, e.g. leisure, study or work activities (Rogowski and Saeed, 2012). However, the handling or the data entry by means of gestures on multi-touch-sensitive screen imposes a number of constraints and consequences which remain mostly unknown (Park and Han, 2013). Currently, few researches in ergonomic psychology wonder about the implications of these new human-computer interactions on task fulfillment.This research project aims to investigate the cognitive, sensori-motor and motivational processes taking place during the use of those devices. The project will analyze the influences of the use of gestures and the type of gesture used: simple or complex gestures (Lao, Heng, Zhang, Ling, and Wang, 2009), as well as the personal self-efficacy feeling in the use of MTD on task engagement, attention mechanisms and perceived disorientation (Chen, Linen, Yen, and Linn, 2011) when confronted to the use of MTD. For that purpose, the various above-mentioned concepts will be measured within a usability laboratory (U-Lab) with self-reported methods (questionnaires) and objective indicators (physiological indicators, eye tracking). Globally, the whole research aims to understand the processes at stakes, as well as advantages and inconveniences of this new technology, to favor a better compatibility and adequacy between gestures, executed tasks and MTD. The conclusions will allow some recommendations for the use of the DMT in specific contexts (e.g. learning context).

Observatoire des usages étudiants universitaires d’un système éducatif de gestion intégré

Les universités recourent de plus en plus souvent à des plateformes technologiques afin d’administrer les processus éducatifs et faciliter les tâches administratives des étudiants. Cependant, ces changements sont conséquents et engendrent souvent de nombreuses difficultés d’implémentation. C’est dans ce cadre qu’un Observatoire des usages étudiants d’un système éducatif de gestion intégré a été créé. Cet observatoire a pour missions d’identifier les facteurs de satisfaction et de fournir des recommandations à l’université. Plusieurs méthodologies (groupes de discussion, tests d’utilisabilité, questionnaires) ont été utilisées. Les résultats montrent que ce sont les difficultés et insatisfactions dues au système utilisé et aux informations présentes sur ce système qui influencent négativement l’acceptabilité du système. La création d’un tel observatoire permet tout à la fois d’étudier l’acceptabilité et la satisfaction des utilisateurs, de différencier l’impact des facteurs personnels et techniques, de s’interroger sur les processus d’évaluation des outils lors de leur implémentation.

Global fire emissions and the contribution of deforestation, savanna, forest, agricultural, and peat fires (1997-2009)

New burned area datasets and top-down constraints from atmospheric concentration measurements of pyrogenic gases have decreased the large uncertainty in fire emissions estimates. However, significant gaps remain in our understanding of the contribution of deforestation, savanna, forest, agricultural waste, and peat fires to total global fire emissions. Here we used a revised version of the Carnegie-Ames-Stanford-Approach (CASA) biogeochemical model and improved satellite-derived estimates of area burned, fire activity, and plant productivity to calculate fire emissions for the 1997-2009 period on a 0.5° spatial resolution with a monthly time step. For November 2000 onwards, estimates were based on burned area, active fire detections, and plant productivity from the MODerate resolution Imaging Spectroradiometer (MODIS) sensor. For the partitioning we focused on the MODIS era. We used maps of burned area derived from the Tropical Rainfall Measuring Mission (TRMM) Visible and Infrared Scanner (VIRS) and Along-Track Scanning Radiometer (ATSR) active fire data prior to MODIS (1997-2000) and estimates of plant productivity derived from Advanced Very High Resolution Radiometer (AVHRR) observations during the same period. Average global fire carbon emissions according to this version 3 of the Global Fire Emissions Database (GFED3) were 2.0 PgC year-1 with significant interannual variability during 1997-2001 (2.8 Pg Cyear-1 in 1998 and 1.6 PgC year-1 in 2001). Globally, emissions during 2002-2007 were rela-tively constant (around 2.1 Pg C year-1) before declining in 2008 (1.7 Pg Cyear-1) and 2009 (1.5 PgC year-1) partly due to lower deforestation fire emissions in South America and tropical Asia. On a regional basis, emissions were highly variable during 2002-2007 (e.g., boreal Asia, South America, and Indonesia), but these regional differences canceled out at a global level. During the MODIS era (2001-2009), most carbon emissions were from fires in grasslands and savannas (44%) with smaller contributions from tropical deforestation and degradation fires (20%), woodland fires (mostly confined to the tropics, 16%), forest fires (mostly in the extratropics, 15%), agricultural waste burning (3%), and tropical peat fires (3%). The contribution from agricultural waste fires was likely a lower bound because our approach for measuring burned area could not detect all of these relatively small fires. Total carbon emissions were on average 13% lower than in our previous (GFED2) work. For reduced trace gases such as CO and CH4, deforestation, degradation, and peat fires were more important contributors because of higher emissions of reduced trace gases per unit carbon combusted compared to savanna fires. Carbon emissions from tropical deforestation, degradation, and peatland fires were on average 0.5 PgC year-1. The carbon emissions from these fires may not be balanced by regrowth following fire. Our results provide the first global assessment of the contribution of different sources to total global fire emissions for the past decade, and supply the community with an improved 13-year fire emissions time series. © 2010 Author(s).

Distribution of HPV genotypes in cervical intraepithelial lesions and cervical cancer in Tanzanian women.

BACKGROUND: Infection with human papillomavirus (HPV) is associated with uterine cervical intraepithelial neoplasia (CIN) and invasive cancers (ICC). Approximately 80% of ICC cases are diagnosed in under-developed countries. Vaccine development relies on knowledge of HPV genotypes characteristic of LSIL, HSIL and cancer; however, these genotypes remain poorly characterized in many African countries. To contribute to the characterization of HPV genotypes in Northeastern Tanzania, we recruited 215 women from the Reproductive Health Clinic at Kilimanjaro Christian Medical Centre. Cervical scrapes and biopsies were obtained for cytology and HPV DNA detection. RESULTS: 79 out of 215 (36.7%) enrolled participants tested positive for HPV DNA, with a large proportion being multiple infections (74%). The prevalence of HPV infection increased with lesion grade (14% in controls, 67% in CIN1 cases and 88% in CIN2-3). Among ICC cases, 89% had detectable HPV. Overall, 31 HPV genotypes were detected; the three most common HPV genotypes among ICC were HPV16, 35 and 45. In addition to these genotypes, co-infection with HPV18, 31, 33, 52, 58, 68 and 82 was found in 91% of ICC. Among women with CIN2-3, HPV53, 58 and 84/83 were the most common. HPV35, 45, 53/58/59 were the most common among CIN1 cases. CONCLUSIONS: In women with no evidence of cytological abnormalities, the most prevalent genotypes were HPV58 with HPV16, 35, 52, 66 and 73 occurring equally. Although numerical constraints limit inference, findings that 91% of ICC harbor only a small number of HPV genotypes suggests that prevention efforts including vaccine development or adjuvant screening should focus on these genotypes.

Human CD19 and CD40L deficiencies impair antibody selection and differentially affect somatic hypermutation.

Individuals with genetic defects in CD40 ligand (CD40L) or B-cell antigen receptor coreceptor molecules CD19 and CD81 suffer from an antibody deficiency. Still, these patients carry low levels of memory B cells and serum antibodies.

Facilitation shifts paradigms and can amplify coastal Restoration efforts

Restoration has been elevated as an important strategy to reverse the decline of coastal wetlands worldwide. Current practice in restoration science emphasizes minimizing competition between outplanted propagules to maximize planting success. This paradigm persists despite the fact that foundational theory in ecology demonstrates that positive species interactions are key to organism success under high physical stress, such as recolonization of bare substrate. As evidence of how entrenched this restoration paradigm is, our survey of 25 restoration organizations in 14 states in the United States revealed that >95% of these agencies assume minimizing negative interactions (i.e., competition) between outplants will maximize propagule growth. Restoration experiments in both Western and Eastern Atlantic salt marshes demonstrate, however, that a simple change in planting configuration (placing propagules next to, rather than at a distance from, each other) results in harnessing facilitation and increased yields by 107% on average. Thus, small adjustments in restoration design may catalyze untapped positive species interactions, resulting in significantly higher restoration success with no added cost. As positive interactions between organisms commonly occur in coastal ecosystems (especially in more physically stressful areas like uncolonized substrate) and conservation resources are limited, transformation of the coastal restoration paradigm to incorporate facilitation theory may enhance conservation efforts, shoreline defense, and provisioning of ecosystem services such as fisheries production.

Multi-touch and keyboard/mouse devices comparison in an information search task: influence on cognitive load and task engagement

Nowadays multi-touch devices (MTD) can be found in all kind of contexts. In the learning context, MTD availability leads many teachers to use them in their class room, to support the use of the devices by students, or to assume that it will enhance the learning processes. Despite the raising interest for MTD, few researches studying the impact in term of performance or the suitability of the technology for the learning context exist. However, even if the use of touch-sensitive screens rather than a mouse and keyboard seems to be the easiest and fastest way to realize common learning tasks (as for instance web surfing behaviour), we notice that the use of MTD may lead to a less favourable outcome. The complexity to generate an accurate fingers gesture and the split attention it requires (multi-tasking effect) make the use of gestures to interact with a touch-sensitive screen more difficult compared to the traditional laptop use. More precisely, it is hypothesized that efficacy and efficiency decreases, as well as the available cognitive resources making the users’ task engagement more difficult. Furthermore, the presented study takes into account the moderator effect of previous experiences with MTD. Two key factors of technology adoption theories were included in the study: familiarity and self-efficacy with the technology.Sixty university students, invited to a usability lab, are asked to perform information search tasks on an online encyclopaedia. The different tasks were created in order to execute the most commonly used mouse actions (e.g. right click, left click, scrolling, zooming, key words encoding…). Two different conditions were created: (1) MTD use and (2) laptop use (with keyboard and mouse). The cognitive load, self-efficacy, familiarity and task engagement scales were adapted to the MTD context. Furthermore, the eye-tracking measurement would offer additional information about user behaviours and their cognitive load.Our study aims to clarify some important aspects towards the usage of MTD and the added value compared to a laptop in a student learning context. More precisely, the outcomes will enhance the suitability of MTD with the processes at stakes, the role of previous knowledge in the adoption process, as well as some interesting insights into the user experience with such devices.

Qu’est-ce qui motive les utilisateurs d’un système de gestion des apprentissages ?

info:eu-repo/semantics/nonPublished

Discriminations à l’emploi à l’égard des personnes LGBT et estime de soi

info:eu-repo/semantics/nonPublished

Employment discrimination against transgender people and self-esteem.

The evocation of gender identity in company anti-discrimination policies is still very rare. This observation is also true forscientific studies. Very few researches have focused exclusively on transgender employees. Transgender are neither sick nor lesscompetent, and yet, the feeling of being strongly discriminated is shared by many transgender people. Such discrimination and thetype of causal attribution do not remain without any effect on the well-being of the concerned individuals. According to Crocker &Quinn (1998), the attribution of the discrimination to the existing prejudices may be a way to protect one-self from the negativeimpact on self-esteem. In this theoretical scope, the "rejection-identification" model (Branscombe, Schmitt & Harvey, 1999) has beenhighly mobilized. It emphasizes the importance of ingroup identification in the causal relationship between perceived discriminationsituation and well-being. Previous studies which did test this model show that the identification to a certain group can counteract thenegative effects on well-being. Following this theoretical frame, the presented study examines the impact of different types of causalattributions on self-esteem: internal causes (e.g. lack of skills), external causes (e.g. economic crisis), and gender identity relatedissues. For that purpose, an online survey has been created and fulfilled by 110 transgender people. Different scales were used to testthe model: the Rosenberg self-esteem scale, a causal attribution scale, the perceived discrimination of the transgender population inthe workplace scale and a group identification scale. The results show that transgender people feel still highly stigmatized today andattribute, significantly, the causes of their situation to the prejudices they are victim of. Also, in accordance with the “rejectionidentification”model, three links are observed: (1) a negative link between perceived discrimination and self-esteem; (2) a positivelink between perceived discrimination and ingroup identification; and (3) a positive link between ingroup identification and selfesteem.This situation reflects a lack in diversity considerations. Nevertheless, the attribution made to group stigmatization seems toplay a protective role towards transgender people self-esteem.

Exploring the benefits of using multi-touch devices in performing information search tasks: An analysis in terms of performance, cognitive load and task engagement

Over the last decade, multi-touch devices (MTD) have spread in a range of contexts. In the learning context, MTD accessibility leads more and more teachers to use them in their classroom, assuming that it will improve the learning activities. Despite a growing interest, only few studies have focused on the impacts of MTD use in terms of performance and suitability in a learning context.However, even if the use of touch-sensitive screens rather than a mouse and keyboard seems to be the easiest and fastest way to realize common learning tasks (as for instance web surfing), we notice that the use of MTD may lead to a less favorable outcome. More precisely, tasks that require users to generate complex and/or less common gestures may increase extrinsic cognitive load and impair performance, especially for intrinsically complex tasks. It is hypothesized that task and gesture complexity will affect users’ cognitive resources and decrease task efficacy and efficiency. Because MTD are supposed to be more appealing, it is assumed that it will also impact cognitive absorption. The present study also takes into account user’s prior knowledge concerning MTD use and gestures by using experience with MTD as a moderator. Sixty university students were asked to perform information search tasks on an online encyclopedia. Tasks were set up so that users had to generate the most commonly used mouse actions (e.g. left/right click, scrolling, zooming, text encoding…). Two conditions were created: MTD use and laptop use (with mouse and keyboard) in order to make a comparison between the two devices. An eye tracking device was used to measure user’s attention and cognitive load. Our study sheds light on some important aspects towards the use of MTD and the added value compared to a laptop in a student learning context.

Quel dispositif utiliser pour la consultation d’une encyclopédie en ligne ?Impact des modalités d’interaction sur la performance et les processus cognitifs

info:eu-repo/semantics/nonPublished

We want to touch IT. Are hybrid laptops just new fancy gadgets or a new revolution?

While the number of traditional laptops and computers sold has dipped slightly year over year, manufacturers have developed new hybrid laptops with touch screens to build on the tactile trend. This market is moving quickly to make touch the rule rather than the exception and the sales of these devices have tripled since the launch of Windows 8 in 2012, to reach more than sixty million units sold in 2015. Unlike tablets, that benefit from easy-to-use applications specially designed for tactile interactions, hybrid laptops are intended to be used with regular user-interfaces. Hence, one could ask whether tactile interactions are suited for every task and activity performed with such interfaces. Since hybrid laptops are increasingly used in educational situations, this study focuses on information search tasks which are commonly performed for learning purposes. It is hypothesized that tasks that require complex and/or less common gestures will increase user's cognitive load and impair task performance in terms of efficacy and efficiency. A study was carried out in a usability laboratory with 30 participants for whom prior experience with tactile devices has been controlled. They were asked to perform information search tasks on an online encyclopaedia by using only the touch screen of and hybrid laptop. Tasks were selected with respect to their level of cognitive demand (amount of information that had to be maintained in working memory) and the complexity of gestures needed (left and/or right clicks, zoom, text selection and/or input.), and grouped into 4 sets accordingly. Task performance was measured by the number of tasks succeeded (efficacy) and time spent on each task (efficiency). Perceived cognitive load was assessed thanks to a questionnaire given after each set of tasks. An eye tracking device was used to monitor users' attention allocation and to provide objective cognitive load measures based on pupil dilation and the Index of Cognitive Activity. Each experimental run took approximately one hour. The results of this within-subjects design indicate that tasks involving complex gestures led to a lower efficacy, especially when the tasks were cognitively demanding. Regarding efficacy, there is no significant differences between sets of tasks excepted for tasks with low cognitive demand and complex gestures that required more time to be achieved. Surprisingly, users that declared the biggest experience with tactile devices spent more time than less frequent users. Cognitive load measures indicate that participants reported having devoted more mental effort in the interaction when they had to use complex gestures.