Estimate of Lagrangian integral scales in shallow tidal water using high resolution GPS-tracked drifters

In estuaries and natural water channels, the estimate of velocity and dispersion coefficients is critical to the knowledge of scalar transport and mixing. This estimate is rarely available experimentally at sub-tidal time scale in shallow water channels where high frequency is required to capture its spatio-temporal variation. This study estimates Lagrangian integral scales and autocorrelation curves, which are key parameters for obtaining velocity fluctuations and dispersion coefficients, and their spatio-temporal variability from deployments of Lagrangian drifters sampled at 10 Hz for a 4-hour period. The power spectral densities of the velocities between 0.0001 and 0.8 Hz were well fitted with a slope of 5/3 predicted by Kolmogorov’s similarity hypothesis within the inertial subrange, and were similar to the Eulerian power spectral previously observed within the estuary. The result showed that large velocity fluctuations determine the magnitude of the integral time scale, TL. Overlapping of short segments improved the stability of the estimate of TL by taking advantage of the redundant data included in the autocorrelation function. The integral time scales were about 20 s and varied by up to a factor of 8. These results are essential inputs for spatial binning of velocities, Lagrangian stochastic modelling and single particle analysis of the tidal estuary.

Engaging a multiple-track approach to building capacity for 21st Century engineering, opportunities and challenges for rapid curriculum renewal

‘Complexity’ is a term that is increasingly prevalent in conversations about building capacity for 21st Century professional engineers. Society is grappling with the urgent and challenging reality of accommodating seven billion people, meeting needs and innovating lifestyle improvements in ways that do not destroy atmospheric, biological and oceanic systems critical to life. Over the last two decades in particular, engineering educators have been active in attempting to build capacity amongst professionals to deliver ‘sustainable development’ in this rapidly changing global context. However curriculum literature clearly points to a lack of significant progress, with efforts best described as ad hoc and highly varied. Given the limited timeframes for action to curb environmental degradation proposed by scientists and intergovernmental agencies, the authors of this paper propose it is imperative that curriculum renewal towards education for sustainable development proceeds rapidly, systemically, and in a transformational manner. Within this context, the paper discusses the need to consider a multiple track approach to building capacity for 21st Century engineering, including priorities and timeframes for undergraduate and postgraduate curriculum renewal. The paper begins with a contextual discussion of the term complexity and how it relates to life in the 21st Century. The authors then present a whole of system approach for planning and implementing rapid curriculum renewal that addresses the critical roles of several generations of engineering professionals over the next three decades. The paper concludes with observations regarding engaging with this approach in the context of emerging accreditation requirements and existing curriculum renewal frameworks.

4.2.5 Environmental engineering

Th is landmark report on engineering and development is the fi rst of its kind to be produced by UNESCO, or indeed by any international organization. Containing highly informative and insightful contributions from 120 experts from all over the world, the report gives a new perspective on the very great importance of the engineer’s role in development. Advances in engineering have been central to human progress ever since the invention of the wheel. In the past hundred and fi fty years in particular, engineering and technology have transformed the world we live in, contributing to signifi cantly longer life expectancy and enhanced quality of life for large numbers of the world’s population. Yet improved healthcare, housing, nutrition, transport, communications, and the many other benefi ts engineering brings are distributed unevenly throughout the world. Millions of people do not have clean drinking water and proper sanitation, they do not have access to a medical centre, they may travel many miles on foot along unmade tracks every day to get to work or school...

Sustainability into the engineering curriculum

Higher education institutions have made some progress towards Engineering Education for Sustainable Development (EESD). There is however a ‘time lag dilemma’ facing engineering educators, where the pace of traditional curriculum renewal may not be sufficient to keep up with potential market,regulatory and institutional shifts.

Re-engineering higher education for energy efficiency solutions

Emerging 21st century challenges require higher education institutions (HEIs) to play a key role in developing graduates and professionals, particularly in engineering and design, who can forge sustainable solutions. The trouble is there’s currently a significant lag in the preparedness of HEIs to provide the stream of professionals needed. Addressing energy efficiency competencies is one critical area.

A summary of the 'Engineering Education for Sustainable Development:Toolkit of Information & Teaching Material'

This paper reflects on the critical need for an urgent transformation of higher education curriculum globally, to equip society with professionals who can address our 21st Century sustainable living challenges. Specifically it discusses a toolkit called the ‘Engineering Sustainable Solutions Program’, which is a freely available, rigorously reviewed and robust content resource for higher education institutions to access content on innovations and opportunities in the process of evolving the curriculum...

A taste of best practice in engineering sustainable solutions

This paper asks the question to what scale and speed does society need to reduce its ecological footprint and improve resource productivity to prevent further overshoot and return within the ecological limits of the earth’s ecological life support systems? How fast do these changes need to be achieved? The paper shows that now a large range of studies find that engineering sustainable solutions need to be roughly an order or magnitude resource productivity improvement (sometimes called a Factor of 10, or a 90% reduction) by 2050 to achieve real and lasting ecological sustainability. This marks a significant challenge for engineers – indeed all designers and architects, where best practice in engineering sustainable solutions will need to achieve large resource productivity targets. The paper brings together examples of best practice in achieving these large targets from around the world. The paper also highlights key resources and texts for engineers who wish to learn how to do it. But engineers need to be realistic and patient. Significant barriers exist to achieving Factor 4-10 such as the fact that infrastructure and technology rollover and replacement is often slow. This slow rollover of the built environment and technology is the context within which most engineers work, making the goal of achieving Factor 10 all the more challenging. However, the paper demonstrates that by using best practice in engineering sustainable solutions and by addressing the necessary market, information and institutional failures it is possible to achieve Factor 10 over the next 50 years. This paper draws on recent publications by The Natural Edge Project (TNEP) and partners, including Hargroves, K. Smith, M. (Eds) (2005) The Natural Advantage of Nations: Business Opportunities, Innovation and Governance for the 21st Century, and the TNEP Engineering Sustainable Solutions Program - Critical Literacies for Engineers Portfolio. Both projects have the significant support of Engineers Australia. its College of Environmental Engineers and the Society of Sustainability and Environmental Engineering.

Toughness and toughening mechanisms of porous thin films

Toughness is the ability of a material to deform plastically and to absorb energy before fracture. The first of its kind, this book covers the most recent developments in the toughening of hard coatings and the methodologies for measuring the toughness of thin films and coatings. The book looks at the present status of toughness for coatings and discusses high-temperature nanocomposite coatings, porous thin films, laser treated surface layers, cracking resistance, indentation techniques, sliding contact fracture, IPN hybrid composites for protection, and adhesion strength.

The rapid manufacture of uniform composite multicellular-biomaterial micropellets, their assembly into macroscopic organized tissues, and potential applications in cartilage tissue engineering

We and others have published on the rapid manufacture of micropellet tissues, typically formed from 100-500 cells each. The micropellet geometry enhances cellular biological properties, and in many cases the micropellets can subsequently be utilized as building blocks to assemble complex macrotissues. Generally, micropellets are formed from cells alone, however when replicating matrix-rich tissues such as cartilage it would be ideal if matrix or biomaterials supplements could be incorporated directly into the micropellet during the manufacturing process. Herein we describe a method to efficiently incorporate donor cartilage matrix into tissue engineered cartilage micropellets. We lyophilized bovine cartilage matrix, and then shattered it into microscopic pieces having average dimensions < 10 μm diameter; we termed this microscopic donor matrix "cartilage dust (CD)". Using a microwell platform, we show that ~0.83 μg CD can be rapidly and efficiently incorporated into single multicellular aggregates formed from 180 bone marrow mesenchymal stem/stromal cells (MSC) each. The microwell platform enabled the rapid manufacture of thousands of replica composite micropellets, with each micropellet having a material/CD core and a cellular surface. This micropellet organization enabled the rapid bulking up of the micropellet core matrix content, and left an adhesive cellular outer surface. This morphological organization enabled the ready assembly of the composite micropellets into macroscopic tissues. Generically, this is a versatile method that enables the rapid and uniform integration of biomaterials into multicellular micropellets that can then be used as tissue building blocks. In this study, the addition of CD resulted in an approximate 8-fold volume increase in the micropellets, with the donor matrix functioning to contribute to an increase in total cartilage matrix content. Composite micropellets were readily assembled into macroscopic cartilage tissues; the incorporation of CD enhanced tissue size and matrix content, but did not enhance chondrogenic gene expression.

Is there a difference between supervising international and domestic graduate students in Engineering and IT?

This paper explores a key issue identified in two studies of factors influencing the success of international and culturally and linguistically diverse (CALD) higher degree research graduate students. The studies include “A model for research supervision of international students in engineering and information technology disciplines” (MRS), which focused on identifying factors that influence successful supervision of culturally and linguistically diverse (CALD) and international higher degree research (HDR or graduate) students in Engineering and IT disciplines in three Australian universities, and “Culture, language and the whole graduate experience: Exploring best practices in international graduate supervision” (BPS), which focussed on exploring perceptions regarding best practices in graduate supervision by diverse stakeholders across Australia. Findings suggest most supervisors do not differentiate between international (or CALD) graduate students and non-CALD(domestic) students in terms of factors influence success in graduate studies.

Consultation: Energy efficiency and engineering education

This report provides the Commonwealth Department of Resources, Energy and Tourism (RET) with a summary of consultation undertaken with representatives from industry and academia around Australia regarding mainstreaming energy efficiency within engineering education. Specifically, the report documents the purpose of the consultation process, key messages and emerging themes, industry-perceived gaps in energy efficiency related knowledge and skills, and academic considerations regarding graduate attributes and learning pathways to close these gaps. This information complements previous reports by presenting the current thoughts and ideas of more than 100 engineering academic and practising professionals who are actively involved in building capacity through the education system or implementing energy efficiency improvements in companies/the workplace. Furthermore, the report describes the emergence of a potential ‘community of practice’ in energy efficiency capacity building that arose during the project.

State of Education for Energy Efficiency in Australian Engineering Education - Summary of Questionnaire Results

In 2007 the National Framework for Energy Efficiency provided funding for the first survey of energy efficiency education across all Australian universities teaching engineering education. The survey asked the question, ‘What is the state of education for energy efficiency in Australian engineering education?’. There was an excellent response to the survey, with 48 course responses from lecturers across 27 universities from every state and territory in Australia, and 260 student responses from 18 courses across 8 universities from all 6 states. It is concluded from the survey findings that the state of education for energy efficiency in Australian engineering education is currently highly variable and ad hoc across universities and engineering disciplines.

Introduction to the Proceedings of the Workshop on User-Focused Service Engineering, Consumption and Aggregation (USECA) 2011

The first User-Focused Service Engineering, Consumption and Aggregation workshop (USECA) in 2011 was held in conjunction with the WISE 2011 conference in Sydney, Australia. Web services and related technology are a widely accepted standard architectural paradigm for application development. The idea of reusing existing software components to build new applications has been well documented and supported for the world of enterprise computing and professional developers. However, this powerful idea has not been transferred to end-users who have limited or no computing knowledge. The current methodologies, models, languages and tools developed for Web service composition are suited to IT professionals and people with years of training in computing technologies. It is still hard to imagine any of these technologies being used by business professionals, as opposed to computing professionals. © 2013 Springer-Verlag.