Relationship between Changes in Cash Flow and Investments in Publicy Traded Restaurant Firms in the United States

This research investigated the relationship between investments in fixed assets and free cash flows of U.S. restaurant firms while controlling for future investment opportunities and financial constraints. It also investigated investment and cash-flow sensitivity in the context of economic conditions. Results suggested that investments in small firms (with higher financial constraints) had relatively weaker sensitivity to cash flows than investments in large firms (with higher sensitivity). Controlling for economic conditions did not significantly change results. While the debate over sensitivity of investments to cash flows remains unresolved, it has not been explored widely in industry contexts, especially in services such as the restaurant industry. In addition to its contribution to this literature, this paper provides implications for cash-flow management in publicly traded restaurant companies.

Benchmarking Quality Management in Hotels

In the early 1980s many hotels in the United States adopted quality assurance as a business strategy. By the late 1980s independent and chain hotels realized that total quality management (TQM) was a more powerful process and they began utilizing many of its components. For over 10 years, hotels have flirted with a variety of tools, processes, and theories to improve service to the guest

Surface Mean Flow and Turbulence Structure in Tropical Cyclone Winds

Hurricanes are one of the deadliest and costliest natural hazards affecting the Gulf coast and Atlantic coast areas of the United States. An effective way to minimize hurricane damage is to strengthen structures and buildings. The investigation of surface level hurricane wind behavior and the resultant wind loads on structures is aimed at providing structural engineers with information on hurricane wind characteristics required for the design of safe structures. Information on mean wind profiles, gust factors, turbulence intensity, integral scale, and turbulence spectra and co-spectra is essential for developing realistic models of wind pressure and wind loads on structures. The research performed for this study was motivated by the fact that considerably fewer data and validated models are available for tropical than for extratropical storms. Using the surface wind measurements collected by the Florida Coastal Monitoring Program (FCMP) during hurricane passages over coastal areas, this study presents comparisons of surface roughness length estimates obtained by using several estimation methods, and estimates of the mean wind and turbulence structure of hurricane winds over coastal areas under neutral stratification conditions. In addition, a program has been developed and tested to systematically analyze Wall of Wind (WoW) data, that will make it possible to perform analyses of baseline characteristics of flow obtained in the WoW. This program can be used in future research to compare WoW data with FCMP data, as gust and turbulence generator systems and other flow management devices will be used to create WoW flows that match as closely as possible real hurricane wind conditions. Hurricanes are defined as tropical cyclones for which the maximum 1-minute sustained surface wind speeds exceed 74 mph. FCMP data include data for tropical cyclones with lower sustained speeds. However, for the winds analyzed in this study the speeds were sufficiently high to assure that neutral stratification prevailed. This assures that the characteristics of those winds are similar to those prevailing in hurricanes. For this reason in this study the terms tropical cyclones and hurricanes are used interchangeably.

SQMS – A prototype for a supplier quality management system

Within the supply chain, the customer does not simply buy parts or services from suppliers, but also buys supplier capabilities, which results in quality products and services. Having a tool that handles the Inspection as well as the Nonconformance, Complaint, Corrective Action and Concession processes is key to successfully track the supplier performance. Taking as a case study a Supplier Quality Management (SQM) currently in operation in an Original Equipment Manufacturer (OEM) for automotive industry, this paper presents a platform to support a Supplier Quality Management System (SQMS), that fits the technical specification ISO/TS 16949 requirements. This prototype is composed by a web platform and a mobile App, having flexibility and mobility as key main characteristics.

Analysis of soil wetting and solute transport in subsurface trickle irrigation

The increased use of trickle or drip irrigation is seen as one way of helping to improve the sustainability of irrigation systems around the world. However, soil water and solute transport properties and soil profile characteristics are often not adequately incorporated in the design and management of trickle systems. In this paper, we describe results of a simulation study designed to highlight the impacts of soil properties on water and solute transport from buried trickle emitters. The analysis addresses the influence of soil hydraulic properties, soil layering, trickle discharge rate, irrigation frequency, and timing of nutrient application on wetting patterns and solute distribution. We show that (1) trickle irrigation can improve plant water availability in medium and low permeability fine-textured soils, providing that design and management are adapted to account for their soil hydraulic properties, (2) in highly permeable coarse-textured soils, water and nutrients move quickly downwards from the emitter, making it difficult to wet the near surface zone if emitters are buried too deep, and (3) changing the fertigation strategy for highly permeable coarse-textured soils to apply nutrients at the beginning of an irrigation cycle can maintain larger amounts of nutrient near to and above the emitter, thereby making them less susceptible to leaching losses. The results demonstrate the need to account for differences in soil hydraulic properties and solute transport when designing irrigation and fertigation management strategies. Failure to do this will result in inefficient systems and lost opportunities for reducing the negative environmental impacts of irrigation.

A sensitive and specific assay for glutathione with potential application to glutathione disulphide, using high-performance liquid chromatography-tandem mass spectrometry

We have utilised the combination of sensitivity and specificity afforded by coupling high-performance liquid chromatography (HPLC) to a tandem mass spectrometer (MS-MS) to produce an assay which is suitable for assaying glutathione (GSH) concentrations in liver tissue. The sensitivity suggests it may also be suitable for extrahepatic tissues, The method has been validated for GSH using mouse liver samples and also allows the assay of GSSG. The stability of GSH under conditions relevant to the assay has been determined. A 20-mul amount of a diluted methanol extract of tissue is injected with detection limits of 0.2 pmol for GSH and 2 pmol for GSSG. The HPLC uses an Altima C-18 (150X4.6 mm, 5 mum) column at 35 degreesC. Chromatography utilises a linear gradient from 0 to 10% methanol in 0.1% formic acid over 5 min, with a final isocratic stage holding at 10% methanol for 5 min. Total flow rate is 0.8 ml/min. The transition from the M+H ion (308.1 m/z for GSH, and 613.3 m/z for GSSG) to the 162.0 m/z (GSH) and 355.3 m/z (GSSG) fragments are monitored. (C) 2001 Elsevier Science B.V. All rights reserved.

The measurement of Pitot pressure in high enthalpy expansion tubes

Expansion tubes operating at total flow enthalpies of 100 MJ kg(-1) or more have characteristical test times of 30-50 mus. Under these conditions, the response time of the Pitot pressure measuring device is critical when performing flow calibration studies. The conventional technique of using a commercial pressure transducer protected by shielding has not always proven to be effective, due to the relatively large (and variable) response time caused by the shielding. A device called the stress wave bar gauge has been designed and calibrated and shown to be an effective way to measure the Pitot pressure with a response time of only 2-3 mus.

The role of discriminant analysis in the refinement of customer satisfaction assessment

OBJECTIVE: To test discriminant analysis as a method of turning the information of a routine customer satisfaction survey (CSS) into a more accurate decision-making tool. METHODS: A 7-question, 10-multiple choice, self-applied questionnaire was used to study a sample of patients seen in two outpatient care units in Valparaíso, Chile, one of primary care (n=100) and the other of secondary care (n=249). Two cutting points were considered in the dependent variable (final satisfaction score): satisfied versus unsatisfied, and very satisfied versus all others. Results were compared with empirical measures (proportion of satisfied individuals, proportion of unsatisfied individuals and size of the median). RESULTS: The response rate was very high, over 97.0% in both units. A new variable, medical attention, was revealed, as explaining satisfaction at the primary care unit. The proportion of the total variability explained by the model was very high (over 99.4%) in both units, when comparing satisfied with unsatisfied customers. In the analysis of very satisfied versus all other customers, significant relationship was identified only in the case of the primary care unit, which explained a small proportion of the variability (41.9%). CONCLUSIONS: Discriminant analysis identified relationships not revealed by the previous analysis. It provided information about the proportion of the variability explained by the model. It identified non-significant relationships suggested by empirical analysis (e.g. the case of the relation very satisfied versus others in the secondary care unit). It measured the contribution of each independent variable to the explanation of the variation of the dependent one.

A Implementação de um sistema de gestão da qualidadena Junta de Freguesia de Gandra

Trabalho de Projeto apresentado ao Instituto Superior de Contabilidade e Administração do Porto para obtenção do grau de Mestre em Auditoria Orientado por: Doutora Alcina Augusta de Sena Portugal Dias

A importância dos fluxos de caixa na análise da solvência, liquidez e visibilidade das empresas

Orientada por: Prof. Doutora Cláudia Lopes

Política(s) de saúde no trabalho : um inquérito sociológico às empresas portuguesas

Resumo Política(s) de saúde no trabalho: um inquérito sociológico às empresas portuguesas A literatura portuguesa sobre políticas, programas e actividades de Segurança, Higiene e Saúde no Trabalho (abreviadamente, SH&ST) é ainda escassa. Com este projecto de investigação pretende-se (i) colmatar essa lacuna, (ii) melhorar o conhecimento dos sistemas de gestão da saúde e segurança no trabalho e (iii) contribuir para a protecção e a promoção da saúde dos trabalhadores. Foi construída uma tipologia com cinco grupos principais de políticas, programas e actividades: A (Higiene & Segurança no Trabalho / Melhoria do ambiente físico de trabalho); B (Avaliação de saúde / Vigilância médica / Prestação de cuidados de saúde); C (Prevenção de comportamentos de risco/ Promoção de estilos de vida saudáveis); D (Intervenções a nível organizacional / Melhoria do ambiente psicossocial de trabalho); E (Actividades e programas sociais e de bem-estar). Havia uma lista de mais de 60 actividades possíveis, correspondendo a um índice de realização de 100%. Foi concebido e desenhado, para ser auto-administrado, um questionário sobre Política de Saúde no Local de Trabalho. Foram efectuados dois mailings, e um follow-up telefónico. O trabalho de campo decorreu entre a primavera de 1997 e o verão de 1998. A amostra (n=259) é considerada representativa das duas mil maiores empresas do país. Uma em cada quatro é uma multinacional. A taxa de sindicalização rondava os 30% da população trabalhadora, mas apenas 16% dos respondentes assinalou a existência de representantes dos trabalhadores eleitos para a SH&ST. A hipótese de investigação principal era a de que as empresas com um sistema integrado de gestão da SH&ST seriam também as empresas com um (i) maior número de políticas, programas e actividades de saúde; (ii) maior índice de saúde; (iii) maior índice de realização; e (iv) maior percentagem dos encargos com a SH&ST no total da massa salarial. As actividades de tipo A e B, tradicionalmente associadas à SH&ST, representavam, só por si, mais de 57% do total. Os resultados, correspondentes às respostas da Secção C do questionário, apontam, para (i) a hipervalorização dos exames de medicina do trabalho; e por outro para (ii) o subaproveitamento de um vasto conjunto de actividades (nomeadamente as de tipo D e E), que são correntemente levadas a cabo pelas empresas e que nunca ou raramente são pensadas em termos de protecção e promoção da saúde dos trabalhadores. As actividades e os programas de tipo C (Prevenção de comportamentos de risco/Promoção de estilos de vida saudáveis), ainda eram as menos frequentes entre nós, a seguir aos Programas sociais e de bem-estar (E). É a existência de sistemas de gestão integrados de SH&ST, e não o tamanho da empresa ou outra característica sociodemográfica ou técnico-organizacional, que permite predizer a frequência de políticas de saúde mais activas e mais inovadores. Os três principais motivos ou razões que levam as empresas portuguesas a investir na protecção e promoção da saúde dos seus trabalhadores eram, por ordem de frequência, (i) o absentismo em geral; (ii) a produtividade, qualidade e/ou competitividade, e (iii) a filosofia de gestão ou cultura organizacional. Quanto aos três principais benefícios que são reportados, surge em primeiro lugar (i) a melhoria da saúde dos trabalhadores, seguida da (ii) melhoria do ambiente do ambiente de trabalho e, por fim, (iii) a melhoria da produtividade, qualidade e/ou competitividade.Quanto aos três principais obstáculos que se põem, em geral, ao desenvolvimento das iniciativas de saúde, eles seriam os seguintes, na percepção dos respondentes: (i) a falta de empenho dos trabalhadores; (ii) a falta de tempo; e (iii) os problemas de articulação/ comunicação a nível interno. Por fim, (i) o empenho das estruturas hierárquicas; (ii) a cultura organizacional propícia; e (iii) o sentido de responsabilidade social surgem, destacadamente, como os três principais factores facilitadores do desenvolvimento da política de saúde no trabalho. Tantos estes factores como os obstáculos são de natureza endógena, susceptíveis portanto de controlo por parte dos gestores. Na sua generalidade, os resultados deste trabalho põem em evidência a fraqueza teóricometodológica de grande parte das iniciativas de saúde, realizadas na década de 1990. Muitas delas seriam medidas avulsas, que se inserem na gestão corrente das nossas empresas, e que dificilmente poderão ser tomadas como expressão de uma política de saúde no local de trabalho, (i) definida e assumida pela gestão de topo, (ii) socialmente concertada, (iii) coerente, (iv) baseada na avaliação de necessidades e expectativas de saúde dos trabalhadores, (v) divulgada, conhecida e partilhada por todos, (vi) contingencial, flexível e integrada, e, por fim, (vii) orientada por custos e resultados. Segundo a Declaração do Luxemburgo (1997), a promoção da saúde engloba o esforço conjunto dos empregadores, dos trabalhadores, do Estado e da sociedade civil para melhorar a segurança, a saúde e o bem-estar no trabalho, objectivo isso que pode ser conseguido através da (i) melhoria da organização e das demais condições de trabalho, da (ii) participação efectiva e concreta dos trabalhadores bem como do seu (iii) desenvolvimento pessoal. Abstract Health at work policies: a sociological inquiry into Portuguese corporations Portuguese literature on workplace health policies, programs and activities is still scarce. With this research project the author intends (i) to improve knowledge on the Occupational Health and Safety (shortly thereafter, OSH) management systems and (ii) contribute to the development of health promotion initiatives at a corporate level. Five categories of workplace health initiatives have been identified: (i) Occupational Hygiene and Safety / Improvement of Physical Working Environment (type A programs); (ii) Health Screening, Medical Surveillance and Other Occupational Health Care Provision (type B programs); (iii) Preventing Risk Behaviours / Promoting Healthy Life Styles (type C programs); (iv) Organisational Change / Improvement of Psycho-Social Working Environment (type D programs); and (v) Industrial and Social Welfare (type E programs). A mail questionnaire was sent to the Chief Executive Officer of the 1500 largest Portuguese companies, operating in the primary and secondary sectors (≥ 100 employees) or tertiary sector (≥ 75 employees). Response rate has reached about 20% (259 respondents, representing about 300 companies). Carried out between Spring 1997 and Summer 1998, the fieldwork has encompassed two direct mailings and one phone follow-up. Sample is considered to be representative of the two thousand largest companies. One in four is a multinational. Union membership rate is about 30%, but only 16% has reported the existence of a workers’ health and safety representative. The most frequent workplace health initiatives were those under the traditional scope of the OSH field (type A and B programs) (57% of total) (e.g., Periodical Medical Examinations; Individual Protective Equipment; Assessment of Working Ability). In SMEs (< 250) it was less likely to find out some time-consuming and expensive activities (e.g., Training on OSH knowledge and skills, Improvement of environmental parameters as ventilation, lighting, heating).There were significant differences in SMEs, when compared with the larger ones (≥ 250) concerning type B programs such as Periodical medical examinations, GP consultation, Nursing care, Other medical and non-medical specialities (e.g., psychiatrist, psychologist, ergonomist, physiotherapist, occupational social worker). With regard to type C programs, there were a greater percentage of programs centred on Substance abuse (tobacco, alcohol, and drug) than on Other health risk behaviours. SMEs representatives reported very few prevention- oriented programs in the field of Drug abuse, Nutrition, Physical activity, Off- job accidents, Blood pressure or Weight control. Frequency of type D programs included Training on Human Resources Management, Training on Organisational Behaviour, Total Quality Management, Job Design/Ergonomics, and Workplace rehabilitation. In general, implementation of this type of programs (Organisational Change / Improvement of Psychosocial Working Environment) is not largely driven by health considerations. Concerning Industrial and Social Welfare (Type E programs), the larger employers are in a better position than SMEs to offer to their employees a large spectrum of health resources and facilities (e.g., Restaurant, Canteen, Resting room, Transport, Infra-structures for physical activity, Surgery, Complementary social protection, Support to recreational and cultural activities, Magazine or newsletter, Intranet). Other workplace health promotion programs like Training on Stress Management, Employee Assistance Programs, or Self-help groups are uncommon in the Portuguese worksites. The existence of integrated OSH management systems, not the company size, is the main variable explaining the implementation of more active and innovative workplace health policies in Portugal. The three main prompting factors reported by employers for health protection and promotion initiatives are: (i) Employee absenteeism; (ii) Productivity, quality and/or competitiveness; and (iii) Corporate culture/management philosophy. On the other hand, (i) Improved staff’s health, (ii) Improved working environment and (iii) Improved productivity, quality and/or competitiveness were the three main benefits reported by companies’ representatives, as a result of successful implementation of workplace health initiatives. (i) Lack of staff commitment; (ii) Lack of time; and (iii) Problems of co-operation and communication within company or establishment (iii) are perceived to be the main barriers companies must cope with. Asked about the main facilitating factors, these companies have pointed out the following ones: (i) Top management commitment; (ii) Corporate culture; and (iii) Sense of social responsibility. This sociological research report shows the methodological weaknesses of workplace health initiatives, carried out by Portuguese companies during the last ‘90s. In many cases, these programs and actions were not part of a corporate health strategy and policy, (i) based on the assessment of workers’ health needs and expectancies, (ii) advocated by the employer or the chief executive officer, (ii) planned and implemented with the staff consultation and participation or (iv) evaluated according to a cost-benefit analysis. In short, corporate health policy and action were still rather based on more traditional OSH approaches and should be reoriented towards Workplace Health Promotion (WHP) approach. According to the Luxembourg Declaration of Workplace Health Promotion in the European Union (1997), WHP is “a combination of: (i) improving the work organisation and environment; (ii) promoting active participation; (iii) encouraging personal development”.Résumée Politique(s) de santé au travail: une enquête sociologique aux entreprises portugaises Au Portugal on ne sait presque rien des politiques de santé au travail, adoptés par les entreprises. Avec ce projet de recherche, on veut (i) améliorer la connaissance sur les systèmes de gestion de la santé et de la sécurité au travail et, au même temps, (ii) contribuer au développement de la promotion de la santé des travailleurs. Une typologie a été usée pour identifier les politiques, programmes et actions de santé au travail: A. Amélioration des conditions de travail / Sécurité au travail; B. Médecine du travail /Santé au travail; C. Prévention des comportements de risque / Promotion de styles de vie sains; D. Interventions organisationnelles / Amélioration des facteurs psychosociaux au travail; E. Gestion de personnel et bien-être social. Un questionnaire postal a été envoyé au représentant maximum des grandes entreprises portugaises, industrielles (≥ 100 employés) ou des services (≥ 75 employés). Le taux de réponse a été environ 20% (259 répondants, concernant trois centaines d’entreprises et d’établissements). La recherche de champ, conduite du printemps 1997 à l’été 1998, a compris deux enquêtes postales et un follow-up téléphonique. L´échantillon est représentatif de la population des deux miles plus grandes entreprises. Un quart sont des multinationales. Le taux de syndicalisation est d’environ 30%. Toutefois, il y a seulement 16% de lieux de travail avec des représentants du personnel pour la santé et sécurité au travail. Les initiatives de santé au travail les plus communes sont celles concernant le domaine plus traditionnel (types A et B) (57% du total): par exemple, les examens de médecine du travail, l’équipement de protection individuelle, les tests d’aptitude au travail. En ce qui concerne les programmes de type C, les plus fréquents sont le contrôle et la prévention des addictions (tabac, alcool, drogue). Les interventions dans le domaine de du système technique et organisationnelle du travail peuvent comprendre les courses de formation en gestion de ressources humaines ou en psychosociologie des organisations, l’ergonomie, le travail posté ou la gestion de la qualité totale. En général, la protection et la promotion de la santé des travailleurs ne sont pas prises en considération dans l’implémentation des initiatives de type D. Il y a des différences quand on compare les grandes entreprises et les moyennes en matière de politique de gestion du personnel e du bien-être (programmes de type E, y compris l’allocation de ressources humaines ou logistiques comme, par exemple, restaurant, journal d’entreprise, transports, installations et équipements sportifs). D’autres activités de promotion de la santé au travail comme la formation en gestion du stress, les programmes d’ assistance aux employés, ou les groupes de soutien et d’auto-aide sont encore très peu fréquents dans les entreprises portugaises. C’est le système intégré de gestion de la santé et de la sécurité au travail, et non pas la taille de l’entreprise, qui aide à prédire l’existence de politiques actives et innovatrices dans ce domaine. Les trois facteurs principaux qui encouragent les actions de santé (prompting factors, en anglais) sont (i) l’absentéisme (y compris la maladie), (ii) les problèmes liés à la productivité, qualité et/ou la compétitivité, et aussi (iii) la culture de l’entreprise/philosophie de gestion. Du coté des bénéfices, on a obtenu surtout l’amélioration (i) de la santé du personnel, (ii) des conditions de travail, et (iii) de la productivité, qualité et/ou compétitivité.Les facteurs qui facilitent les actions de santé au travail sont (i) l’engagement de la direction, (ii) la culture de l’entreprise, et (iii) le sens de responsabilité sociale. Par contre, les obstacles à surmonter, selon les organisations qui ont répondu au questionnaire, seraient surtout (i) le manque d’engagement des travailleurs et de leur représentants, (ii) le temps insuffisant, et (iii) les problèmes de articulation/communication au niveau interne de l’entreprise/établissement. Ce travail de recherche sociologique montre la faiblesse méthodologique des services et activités de santé et sécurité au travail, mis en place par les entreprises portugaises dans les années de 1990, à la suite des accords de concertation sociale de 1991. Dans beaucoup de cas, (i) ces politiques de santé ne font pas partie encore d’un système intégré de gestion, (ii) il n’a pas d’évaluation des besoins et des expectatives des travailleurs, (iii) c’est très bas ou inexistant le niveau de participation du personnel, (iv) on ne fait pas d’analyse coût-bénéfice. On peut conclure que les politiques de santé au travail sont plus proches de la médecine du travail et de la sécurité au travail que de la promotion de la santé des travailleurs. Selon la Déclaration du Luxembourg sur la Promotion de la Santé au Lieu de Travail dans la Communauté Européenne (1997), celle-ci « comprend toutes les mesures des employeurs, des employés et de la société pour améliorer l'état de santé et le bien être des travailleurs » e « ceci peut être obtenu par la concentration des efforts dans les domaines suivants: (i) amélioration de l'organisation du travail et des conditions de travail ; (ii) promotion d'une participation active des collaborateurs ; (iii) renforcement des compétences personnelles ».

Difficulties in access and estimates of public beds in intensive care units in the state of Rio de Janeiro

ABSTRACT OBJECTIVE To estimate the required number of public beds for adults in intensive care units in the state of Rio de Janeiro to meet the existing demand and compare results with recommendations by the Brazilian Ministry of Health. METHODS The study uses a hybrid model combining time series and queuing theory to predict the demand and estimate the number of required beds. Four patient flow scenarios were considered according to bed requests, percentage of abandonments and average length of stay in intensive care unit beds. The results were plotted against Ministry of Health parameters. Data were obtained from the State Regulation Center from 2010 to 2011. RESULTS There were 33,101 medical requests for 268 regulated intensive care unit beds in Rio de Janeiro. With an average length of stay in regulated ICUs of 11.3 days, there would be a need for 595 active beds to ensure system stability and 628 beds to ensure a maximum waiting time of six hours. Deducting current abandonment rates due to clinical improvement (25.8%), these figures fall to 441 and 417. With an average length of stay of 6.5 days, the number of required beds would be 342 and 366, respectively; deducting abandonment rates, 254 and 275. The Brazilian Ministry of Health establishes a parameter of 118 to 353 beds. Although the number of regulated beds is within the recommended range, an increase in beds of 122.0% is required to guarantee system stability and of 134.0% for a maximum waiting time of six hours. CONCLUSIONS Adequate bed estimation must consider reasons for limited timely access and patient flow management in a scenario that associates prioritization of requests with the lowest average length of stay.

A Qualidade na administração pública e a CAF – Common assessment framework

Apresentação no âmbito da Dissertação de Mestrado Orientador: Doutora Alcina Dias

The paradigm of TQM

In this short contribution a reflection on the evolution of the the Total Quality Management paradigm is pesented. The main differences between the three perspectives of Quality Management are analyzed, together with a set of changes and improvements to the practice of TQM that are likely to take place.

Contributo para a gestão da qualidade clínica num serviço de radiologia

RESUMO - A preocupação com a qualidade dos cuidados prestados é, actualmente, foco de interesse e de extrema importância na prestação de cuidados de saúde, e como tal na radiologia. A garantia, monitorização e melhoria da qualidade deve ser um dos grandes objectivos de uma instituição de saúde. Assim, pretende-se contribuir para a criação de um modelo de gestão da qualidade focado na qualidade do diagnóstico, identificando procedimentos que interferem directamente na qualidade do diagnóstico e que, ao serem implementados, contribuem para a garantia e/ou melhoria da qualidade desse diagnóstico. Tal modelo pode integrar um sistema de gestão da qualidade total num serviço de radiologia. O delineamento do estudo passa por propor a um painel de especialistas os procedimentos essenciais encontrados na bibliografia para que estes, por consenso, seleccionem os considerados mais importantes. Pretende-se também conhecer, recorrendo ao mesmo painel de peritos, os indicadores que devem integrar o modelo, de forma a construir um modelo de gestão da qualidade clínica em radiologia adaptado à realidade nacional. Os objectivos do sistema de qualidade proposto passam por fornecer uma abordagem sistemática de actividades que possam afectar a qualidade através da construção de procedimentos claros e objectivos aplicáveis a cada área de um serviço de radiologia: área administrativa, área técnica e área médica; privilegiar as actividades de prevenção em vez que confiar apenas na inspecção, na medida em que os procedimentos integram normas que minimizam a existência de falha na qualidade clínica; fornecer uma evidência objectiva de que a qualidade foi alcançada através de indicadores que monitorizam os procedimentos do modelo. A finalidade passa por criar um modelo de gestão da qualidade clínica, constituído por procedimentos e indicadores, focado na melhoria da qualidade do diagnóstico clínico em radiologia. Por ser um estudo pioneiro, o modelo deve ser simples, de fácil implementação nos serviços de radiologia, e passível de ser monitorizado e avaliado, interna e externamente. --------------------ABSTRACT - The concern about the quality of care is currently the focus of interest and paramount importance, in healthcare and in radiology. Therefore, quality monitoring and its improvement must be one of the major objectives of a healthcare institution on health, when compared to current diversity. Thus, it is intended to create a model of quality management focused on the quality of diagnosis, identifying procedures that directly interfere in the quality of diagnosis and which, when completed, contributes to a warranty and / or improvement of the quality of diagnosis. This model can integrate a system of total quality management in a radiology department. The study design is to propose to a panel of experts the essential procedures found in the literature so that they, by consensus, select those considered most important. The aim is also to know, using the same panel of experts, indicators that must be included in the model in order to construct a model of quality management in clinical radiology adapted to national reality. The objectives of the quality system proposed are: provide a systematic approach of activities that may affect the quality through the construction of clear procedures and targets applicable to each area of a radiology department: the administrative, technical and medical area; focus on activities prevention rather than relying solely on inspection, once the procedures and activities integrate standards that minimize the existence of failure in clinical quality; provide objective evidence that quality has been achieved through indicators that monitor the procedures of the model. The purpose of this study is to create a clinical quality management model, constituted by procedures and indicators, focused on improving the quality of clinical diagnosis in radiology. Being a pioneering study, the model should be simple, easy to implement in the department of radiology and easily monitored and evaluated internally and externally.