A study of new product market search and user adoption

The research was carried out in the Aviation Division of Dunlop Limited and was initiated as a search for more diverse uses for carbon/carbon composites. An assumed communication model of adoption was refined by introducing the concept of a two way search after making cross industry comparisons of supplier and consumer behaviour. This research has examined methods of searching for new uses for advanced technology materials. Two broad approaches were adopted. First, a case history approach investigated materials that had been in a similar oosition to carbon/carbon to see how other material producing firms had tackled the problem. Second, a questionnaire survey among industrialists examined: the role and identity of material decision makers in different sized firms; the effectiveness of various information sources and channels; and the material adoption habits of different industries. The effectiveness of selected information channels was further studied by monitoring the response to publicity given to carbon/carbon. A flow chart has been developed from the results of this research which should help any material producing firm that is contemplating the introduction of a new material to the world market. Further benefit to our understanding of the innovation and adoption of new materials would accrue from work in the followino areas: "micro" type case histories; understanding more fully the role of product champions or promoters; investigating the phase difference between incremental and radical type innovations for materials; examining the relationship between the adoption rate of new materials and the advance of technology; studying the development of cost per unit function methods for material selection; and reviewing the benefits that economy of scale studies can have on material developments. These are all suggested areas for further work.

Product innovation in a new technology based firm

This thesis examines the "state of the art" of product innovation in new technology In the UK. The roles in innovation attributed to small and large firms are examined. Growing attention is being focused upon the small firm sector as a seedbed for Innovation and government policy has been changing to encourage the entrepreneurial new technology based firm (NTBF). The novel perspective of this research results from working in such a firm. It provides a longitudinal study of the management of innovation in conjunction with the corporate strategy of the firm. Given that the researcher was a participant and observer in the firm studied, the research is akin to action research in methodology but is better described as grounded theory. Theoretical concepts are drawn from the prescriptive literature describing corporate strategy, and from the empirical literature which has evaluated new product success and failure. Models of the Innovation process are discussed and appropriate strategies and reasons for product innovation failure in NTBFs are described. The strategy, structure and new product development progress of the company are examined, using both the researcher's observations and company documents. This provides information on the methods and practices adopted for product innovation in a NTBF. The thesis analyses the performance of the firm In terms of product innovation. The models and strategies derived from the literature are then tested in the light of the experience of the company. Conclusions are drawn regarding strategies for innovation in NTBFs and about the innovation process in general. The importance of a NTBF adopting a synergistic strategy is shown. Links are established between the existence of synergy in the strategy and coupling in the management of innovation. Innovation is shown to be a laterally interdisciplinary exercise and therefore the "pipeline model" Is criticised. Finally a set of guidelines Is produced for the managers of NTBFs.

Crowdsourcing User-Contributed Solutions to Aerospace Product Development Issues through Micro-Blogging

Revenue and production output of the United Kingdom’s Aerospace Industry (AI) is growing year on year and the need to develop new products and innovative enhancements to existing ranges is creating a critical need for the increased utilisation and sharing of employee knowledge. The capture of employee knowledge within the UK’s AI is vital if it is to retain its pre-eminent position in the global marketplace. Crowdsourcing, as a collaborative problem solving activity, allows employees to capture explicit knowledge from colleagues and teams and also offers the potential to extract previously unknown tacit knowledge in a less formal virtual environment. By using micro-blogging as a mechanism, a conceptual framework is proposed to illustrate how companies operating in the AI may improve the capture of employee knowledge to address production-related problems through the use of crowdsourcing. Subsequently, the framework has been set against the background of the product development process proposed by Maylor in 1996 and illustrates how micro-blogging may be used to crowdsource ideas and solutions during product development. Initial validation of the proposed framework is reported, using a focus group of 10 key actors from the collaborating organisation, identifying the perceived advantages, disadvantages and concerns of the framework; results indicate that the activity of micro-blogging for crowdsourcing knowledge relating to product development issues would be most beneficial during product conceptualisation due to the requirement for successful innovation.

Development of a knowledge sharing framework for improving the testing processes in global product development

As identified by Griffin (1997) and Kahn (2012), manufacturing organisations typically improve their market position by accelerating their product development (PD) cycles. One method for achieving this is to reduce the time taken to design, test and validate new products, so that they can reach the end customer before competition. This paper adds to existing research on PD testing procedures by reporting on an exploratory investigation carried out in a UK-based manufacturing plant. We explore the organisational and managerial factors that contribute to the time spent on testing of new products during development. The investigation consisted of three sections, viz. observations and process modelling, utilisation metrics and a questionnaire-based investigation, from which a proposed framework to improve and reduce the PD time cycle is presented. This research focuses specifically on the improvement of the utilisation of product testing facilities and the links to its main internal stakeholders - PD engineers.

How environmental and organizational complexity affects opportunity recognition in development projects

New product development projects are experiencing increasing internal and external project complexity. Complexity leadership theory proposes that external complexity requires adaptive and enabling leadership, which facilitates opportunity recognition (OR). We ask whether internal complexity also requires OR for increased adaptability. We extend a model of EO and OR to conclude that internal complexity may require more careful OR. This means that leaders of technically or structurally complex projects need to evaluate opportunities more carefully than those in projects with external or technological complexity.

Innovation and the city : a macromarketing approach to industry development

Purpose – The purpose of this paper is to propose and demonstrate the relevance of marketing systems, notably the process of product management and innovation, to urban development challenges. Design/methodology/approach – A macromarketing perspective is adopted to construe the city as a product and begin the application of the innovation process to urban management, following the steps commonly proposed for successful innovation in product management. An example of the application of the initial new product development steps of idea generation and opportunity identification is presented. Findings – The innovation process provides guidelines and checkpoints that enable corporations to improve the success rate of their development initiatives. Cities, like corporations, need to innovate in order to maintain their image and functionality, to provide a myriad benefits to their stakeholders and, thereby, to survive and grow. The example here shows how the preliminary NPD steps of idea generation and opportunity identification enrich the process of identifying and analysing new industry opportunities for a city. Practical implications – By conceptualising the city as a multifaceted product, the disciplined planning and evaluation processes pertinent to NPD success become relevant and helpful to practitioners responsible for urban planning, urban development and change. Originality/value – The paper shows how pertinent concepts and processes from marketing can be effectively applied to urban planning and economic development initiatives.

Why new business development projects fail : coping with the differences of technological versus market knowledge

Managing through projects has become important for generating new knowledge to cope with technological and market discontinuities. This paper examines how the fit between the creation of technological and market knowledge and important project management characteristics, i.e. project autonomy and completion criteria, influences the success of new business development (NBD) projects. In-depth longitudinal case research on NBD projects commercialised from 1993 to 2003 in the consumer electronics industry highlights that project management characteristics focusing only on the creation of technological knowledge contributed to the failure of those NBD projects that required new market knowledge as well. The findings indicate that senior management support and engaging in an alliance with partners possessing complementary market knowledge can offset this misalignment of the organisation of NBD projects.

How environmental and organizational complexity affects opportunity recognition and exploitation in development projects

Principal Topic: Project structures are often created by entrepreneurs and large corporate organizations to develop new products. Since new product development projects (NPDP) are more often situated within a larger organization, intrapreneurship or corporate entrepreneurship plays an important role in bringing these projects to fruition. Since NPDP often involves the development of a new product using immature technology, we describe development of an immature technology. The Joint Strike Fighter (JSF) F-35 aircraft is being developed by the U.S. Department of Defense and eight allied nations. In 2001 Lockheed Martin won a $19 billion contract to develop an affordable, stealthy and supersonic all-weather strike fighter designed to replace a wide range of aging fighter aircraft. In this research we define a complex project as one that demonstrates a number of sources of uncertainty to a degree, or level of severity, that makes it extremely difficult to predict project outcomes, to control or manage project (Remington & Zolin, Forthcoming). Project complexity has been conceptualized by Remington and Pollock (2007) in terms of four major sources of complexity; temporal, directional, structural and technological complexity (See Figure 1). Temporal complexity exists when projects experience significant environmental change outside the direct influence or control of the project. The Global Economic Crisis of 2008 - 2009 is a good example of the type of environmental change that can make a project complex as, for example in the JSF project, where project managers attempt to respond to changes in interest rates, international currency exchange rates and commodity prices etc. Directional complexity exists in a project where stakeholders' goals are unclear or undefined, where progress is hindered by unknown political agendas, or where stakeholders disagree or misunderstand project goals. In the JSF project all the services and all non countries have to agree to the specifications of the three variants of the aircraft; Conventional Take Off and Landing (CTOL), Short Take Off/Vertical Landing (STOVL) and the Carrier Variant (CV). Because the Navy requires a plane that can take off and land on an aircraft carrier, that required a special variant of the aircraft design, adding complexity to the project. Technical complexity occurs in a project using technology that is immature or where design characteristics are unknown or untried. Developing a plane that can take off on a very short runway and land vertically created may highly interdependent technological challenges to correctly locate, direct and balance the lift fans, modulate the airflow and provide equivalent amount of thrust from the downward vectored rear exhaust to lift the aircraft and at the same time control engine temperatures. These technological challenges make costing and scheduling equally challenging. Structural complexity in a project comes from the sheer numbers of elements such as the number of people, teams or organizations involved, ambiguity regarding the elements, and the massive degree of interconnectedness between them. While Lockheed Martin is the prime contractor, they are assisted in major aspects of the JSF development by Northrop Grumman, BAE Systems, Pratt & Whitney and GE/Rolls-Royce Fighter Engineer Team and innumerable subcontractors. In addition to identifying opportunities to achieve project goals, complex projects also need to identify and exploit opportunities to increase agility in response to changing stakeholder demands or to reduce project risks. Complexity Leadership Theory contends that in complex environments adaptive and enabling leadership are needed (Uhl-Bien, Marion and McKelvey, 2007). Adaptive leadership facilitates creativity, learning and adaptability, while enabling leadership handles the conflicts that inevitably arise between adaptive leadership and traditional administrative leadership (Uhl-Bien and Marion, 2007). Hence, adaptive leadership involves the recognition and opportunities to adapt, while and enabling leadership involves the exploitation of these opportunities. Our research questions revolve around the type or source of complexity and its relationship to opportunity recognition and exploitation. For example, is it only external environmental complexity that creates the need for the entrepreneurial behaviours, such as opportunity recognition and opportunity exploitation? Do the internal dimensions of project complexity, such as technological and structural complexity, also create the need for opportunity recognition and opportunity exploitation? The Kropp, Zolin and Lindsay model (2009) describes a relationship between entrepreneurial orientation (EO), opportunity recognition (OR), and opportunity exploitation (OX) in complex projects, with environmental and organizational contextual variables as moderators. We extend their model by defining the affects of external complexity and internal complexity on OR and OX. ---------- Methodology/Key Propositions: When the environment complex EO is more likely to result in OR because project members will be actively looking for solutions to problems created by environmental change. But in projects that are technologically or structurally complex project leaders and members may try to make the minimum changes possible to reduce the risk of creating new problems due to delays or schedule changes. In projects with environmental or technological complexity project leaders who encourage the innovativeness dimension of EO will increase OR in complex projects. But projects with technical or structural complexity innovativeness will not necessarily result in the recognition and exploitation of opportunities due to the over-riding importance of maintaining stability in the highly intricate and interconnected project structure. We propose that in projects with environmental complexity creating the need for change and innovation project leaders, who are willing to accept and manage risk, are more likely to identify opportunities to increase project effectiveness and efficiency. In contrast in projects with internal complexity a much higher willingness to accept risk will be necessary to trigger opportunity recognition. In structurally complex projects we predict it will be less likely to find a relationship between risk taking and OP. When the environment is complex, and a project has autonomy, they will be motivated to execute opportunities to improve the project's performance. In contrast, when the project has high internal complexity, they will be more cautious in execution. When a project experiences high competitive aggressiveness and their environment is complex, project leaders will be motivated to execute opportunities to improve the project's performance. In contrast, when the project has high internal complexity, they will be more cautious in execution. This paper reports the first stage of a three year study into the behaviours of managers, leaders and team members of complex projects. We conduct a qualitative study involving a Group Discussion with experienced project leaders. The objective is to determine how leaders of large and potentially complex projects perceive that external and internal complexity will influence the affects of EO on OR. ---------- Results and Implications: These results will help identify and distinguish the impact of external and internal complexity on entrepreneurial behaviours in NPDP. Project managers will be better able to quickly decide how and when to respond to changes in the environment and internal project events.

Teachers’ attitudes toward reporting child sexual abuse : problems with existing research leading to new scale development

This paper details a systematic literature review identifying problems in extant research relating to teachers’ attitudes towards reporting child sexual abuse, and offers a model for new attitude scale development and testing. Scale development comprised a five-phase process grounded in contemporary attitude theories including: a) developing the initial item pool; b) conducting a panel review; c) refining the scale via an expert focus group; d) building content validity through cognitive interviews; e) assessing internal consistency via field testing. The resulting 21-item scale displayed construct validity in preliminary testing. The scale may prove useful as a research tool, given the theoretical supposition that attitudes may be changed with time, context, experience, and education. Further investigation with a larger sample is warranted.

Distinguishing forced versus discretionary replacements in new product diffusion models

In many product categories of durable goods such as TV, PC, and DVD player, the largest component of sales is generated by consumers replacing existing units. Aggregate sales models proposed by diffusion of innovation researchers for the replacement component of sales have incorporated several different replacement distributions such as Rayleigh, Weibull, Truncated Normal and Gamma. Although these alternative replacement distributions have been tested using both time series sales data and individual-level actuarial “life-tables” of replacement ages, there is no census on which distributions are more appropriate to model replacement behaviour. In the current study we are motivated to develop a new “modified gamma” distribution by two reasons. First we recognise that replacements have two fundamentally different drivers – those forced by failure and early, discretionary replacements. The replacement distribution for each of these drivers is expected to be quite different. Second, we observed a poor fit of other distributions to out empirical data. We conducted a survey of 8,077 households to empirically examine models of replacement sales for six electronic consumer durables – TVs, VCRs, DVD players, digital cameras, personal and notebook computers. This data allows us to construct individual-level “life-tables” for replacement ages. We demonstrate the new modified gamma model fits the empirical data better than existing models for all six products using both a primary and a hold-out sample.

Creating new possibilities : using design processes to overcome constraints

This paper describes how a team from a large company, when faced with a challenge to develop new customers in fast growing international markets, carried out the exploration of the needs of new clients in the largely unexplored market space of a developing country. This team used design methods and processes to identify the latent needs of new customers in situations of major economic, geographical, cultural and financial constraints. This encapsulation of the life experiences of potential customers is used extensively in some new product development, but is largely novel to business practices and in processes of developing new services. This research links with the sub-theme of discovering creativity in necessity and highlights the potential benefits of design methodologies to create new possibilities for better accessibility of the company’s products to new clients, with future implications for organizational strategy. The overall theme of Design for the Colloquium encourages exploration of the ways and means of developing new ideas for new business with better outcomes, using design concepts and design technologies.

A framework for life cycle cost estimation of a product family at the early stage of product development

A cost estimation method is required to estimate the life cycle cost of a product family at the early stage of product development in order to evaluate the product family design. There are difficulties with existing cost estimation techniques in estimating the life cycle cost for a product family at the early stage of product development. This paper proposes a framework that combines a knowledge based system and an activity based costing techniques in estimating the life cycle cost of a product family at the early stage of product development. The inputs of the framework are the product family structure and its sub function. The output of the framework is the life cycle cost of a product family that consists of all costs at each product family level and the costs of each product life cycle stage. The proposed framework provides a life cycle cost estimation tool for a product family at the early stage of product development using high level information as its input. The framework makes it possible to estimate the life cycle cost of various product family that use any types of product structure. It provides detailed information related to the activity and resource costs of both parts and products that can assist the designer in analyzing the cost of the product family design. In addition, it can reduce the required amount of information and time to construct the cost estimation system.